Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceramic processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Silicon carbide reinforced zirconium based cladding

A method for making an improved nuclear fuel cladding tube includes reinforcing a Zr alloy tube by first winding or braiding ceramic yarn directly around the tube to form a ceramic covering, then physically bonding the ceramic covering to the tube by applying a first coating selected from the group consisting of Nb, Nb alloy, Nb oxide, Cr, Cr oxide, Cr alloy, or combinations thereof, by one of a thermal deposition process or a physical deposition process to provide structural support member for the Zr tube, and optionally applying a second coating and optionally applying a third coating by one of a thermal deposition process or a physical deposition process. If the tube softens at 800° C.-1000° C., the structural support tube will reinforce the Zr alloy tube against ballooning and bursting, thereby preventing the release of fission products to the reactor coolant.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Finding ways to reduce nuclear waste: searching for the unknown one step at a time

In my home country, Venezuela, research has been stagnant. Due to the political turmoil and the crisis, many educated people have left the country in search for a better life. This has caused a deficit in any technological and scientific advances, making Venezuela one of the first South American countries to have its rate of publications decline by 29% in 2013. Currently, Venezuela lacks the infrastructure and the means to keep up with the research progress as compared to other countries in South America, such as Brazil. Since coming to the United States (US), and currently working for a national laboratory, the active research environment endorses a wide range of careers and engineering programs that allow researchers to thrive at any given field. Researchers have access to funds and tools to succeed in developing materials for the future. There are 17 national laboratories in the US, and all of these have a different research focus/objective. As examples, Los Alamos National Laboratory and Sandia National Laboratory focus is on national homeland security, weapon science, radiation effects, among others. Argonne National Laboratory focuses on nuclear energy, energy storage, high performance computing, etc. At Idaho National Laboratory (INL) the research focuses on innovating nuclear energy and clean energy resources, critical infrastructure materials, along with fuel cycle solutions to manage, dispose and find ways to recycle current and future radiological waste. Compared to other national laboratories, INL focuses slightly more on applied processes and how nuclear energy can be innovated to next reactor design and technologies. The research being conducted at INL made me apply for a Seaborg distinguished postdoctoral position. For the position itself, the researcher must submit a proposal related to actinide chemistry on a research field area. In this position, 50% of my time will be focused on my own proposal. The proposal that I am working on is focused on the innovation of nuclear energy and fuel cycle recycling, which is why I was mainly interested on working at this national laboratory. To give a bit more context of what my proposal is about, a little bit of background is necessary: After the nuclear fuel (UO2) is used in a reactor, the fuel matrix is then characterized by various fission products (FP). Among these FP (including rare earth elements, alkali/alkaline earths, and actinides), many can potentially be recovered through nuclear reprocessing technologies. In pyroprocessing, the used nuclear fuel undergoes electrochemical dissolution into a molten chloride salt mixture in an electrorefiner. Initially, uranium is reduced onto an inert cathode by applied potentials. However, numerous remaining FPs accumulate in the melt and pose challenges for recovery by an inert electrode, particularly the rare earth elements (e.g., Nd, Gd, Pr, Sm) due to their multivalent oxidation states and tendencies toward side reactions, leading to their dissolution in the electrolyte. These recovery challenges result in inefficiencies and necessitate the continual discarding of the molten chloride salt, thereby generating additional waste. Furthermore, the presence of rare earth elements and other fission products in the molten salt electrolyte alters its physical and chemical properties, affecting both uranium recovery efficiency and the longevity of the molten chloride salt. To improve the recovery efficiency of the FP, specifically rare earth elements, I am investigating the fundamental interactions between rare earth elements in the molten chloride salt and their metallic form. The kinetic pathways and the chemical reactions of these elements will give insights on how the recovery efficiency can be improved. The interactions and speciation of these elements are being studied by spectro-electrochemistry at high temperature environments in quartz and other ceramic materials (e.g., alumina crucibles). Some of the challenges I am facing specifically relates the reactivity of some of these elements with different glass and crucible materials. Although my research focuses on fundamental science, it will benefit the applied process by generating new scientific knowledge and closing the gap for an efficient recycling of the waste: one step at a time.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Performance degradation in proton-conducting ceramic fuel cell and electrolyzer stacks

Proton-conducting ceramics are emerging as enabling materials for efficient electrochemical electricity generation, energy storage, and fuels synthesis. In this work, we present longer-term degradation results for protonic-ceramic fuel cells and electrolyzers based on a BaCe 0.4 Zr 0.4 Y 0.1 Yb 0.1 O 3-δ (BCZYYb) electrolyte. The cells are packaged within unit-cell stacks, including metallic interconnects, current collectors, sealing glasses and gaskets. Durability is found to be superior in protonic-ceramic electrolyzers in comparison to fuel cells. Operating conditions have a large impact on degradation rates; better stability is found at fuel-cell operating temperatures above 600 °C, and electrolyzer steam feeds below 20%. Here, we find that both fuel-cell and electrolyzer degradation is greatly reduced via the introduction of a gadolinium-doped ceria interlayer between the electrolyte and the air–steam electrode. Fuel-cell degradation falls to 1.2% khr –1 under methane fuel at 600 °C; electrolyzer degradation is reduced to 1% khr –1 at 550 °C and 50% steam. Further analyses of electrochemical impedance spectroscopy and distribution of relaxation times provide insight to root processes and degradation phenomena in protonic electroceramics.

25 ENERGY STORAGE↗

Co-Extrusion: Advanced Manufacturing for Energy Devices

The development of mass markets for large-format batteries, including electric vehicles (EVs) and grid support, depends on both cost reductions and performance enhancements to improve their economic viability. Palo Alto Research Center (PARC) has developed a multi-material, advanced manufacturing process called co-extrusion (CoEx) to remove multiple steps in a conventional battery coating process with the potential to simultaneously increase battery energy and power density. CoEx can revolutionize battery manufacturing across most chemistries, significantly lowering end-product cost and shifting the underlying economics to make EVs and other battery applications a reality. PARC’s scale-up of CoEx for electric vehicle (EV) batteries builds on a solid base of experience in applying CoEx to solar cell manufacturing, deposition of viscous ceramic pastes, and Li-ion battery chemistries. In the solar application, CoEx has been deployed commercially at production scale where multi-channel CoEx printheads are used to print viscous silver gridline pastes at full production speeds (>40 ft/min). This operational scale-up provided invaluable experience with the nuances of speed, yield, and maintenance inherent in taking a new technology to the factory floor. PARC has leveraged this experience, adapting the CoEx process for Lithium-ion (Li-ion) battery manufacturing. To date, PARC has worked with Li-ion battery materials and structured cathodes with high-density Li-ion regions and low-density conduction regions, documenting both energy and power performance. Modeling results for a CoEx cathode show a path towards a 10-20% improvement in capacity for an EV pouch cell. Experimentally, we have realized a co-extruded battery structure with a Lithium Nickel Manganese Cobalt (NMC) cathode at print speeds equivalent to conventional roll coating processes. The heterogeneous CoEx cathode enables improved capacity in thick electrodes at higher C-rates. The proof-of-principle coin cells demonstrate the feasibility of the CoEx technology and a path towards higher energy and higher power EV pouch cells.

25 ENERGY STORAGE↗

Quantized Grain Boundary States Promote Nanoparticle Alignment During Imperfect Oriented Attachment

Oriented attachment (OA) has become a well-recognized mechanism for the growth of metal, ceramic, and biomineral crystals. While many computational and experimental studies of OA have shown that particles can attach with some misorientation then rotate to remove adjoining grain boundaries, the underlying atomistic pathways for this “Imperfect OA” process remain the subject of debate. In this paper, molecular dynamics and in situ TEM were used to probe the crystallographic evolution of up to 30 gold and copper nanoparticles during aggregation. It was found that Imperfect OA occurs because (1) grain boundaries become quantized when their size is comparable to the separation between constituent dislocations and (2) kinetic barriers associated with the glide of grain boundary dislocations are small. In support of these findings, TEM experiments show the formation of a single crystal aggregate after annealing 9 initially misoriented, agglomerated particles with evidence of dislocation slip and twin formation during particle/grain alignment. These observations motivate future work on assembled nanocrystals with tailored defects and call for a revision of Read-Shockley models for grain boundary energies in nanocrystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured aluminium titanate (Al{sub 2}TiO{sub 5}) particles and nanofibers: Synthesis and mechanism of microstructural evolution

In this study, aluminium titanate (AT) particles and nanofibers were synthesized through citrate sol gel and sol gel-assisted electrospinning methods in both nanostructured powder and nanofiber forms. The results of X-ray diffraction analysis, field-emission scanning electron microscopy and differential thermal analysis showed that the synthetic products benefit a nanostructured nature with a grain size less than 70 nm. The optimal values for time and temperature at which a roughly pure AT is attained were determined as 2 h and 900 °C, respectively. It was found that the sol gel precursor bears an amorphous structure till 700 °C and begins to be crystallized to alumina, anatase and AT at higher temperatures. Moreover, AT tends to decompose into rutile and alumina at temperatures higher than 900 °C and its degradation rate reaches a maximum at temperatures near to 1100 °C. In this synthesis, citric acid was used as a chelating agent for Al{sup 3} {sup +} and Ti{sup 4} {sup +} ions and it was shown that a low citric acid-to-metal cation ratio leads to larger numbers of nuclei during crystallization and smaller grain size. Finally, a model was suggested to describe the microstructural evolution of AT compound based on a nucleation and growth regime. - Graphical abstract: Display Omitted - Highlights: • We synthesized aluminium titanate ceramic in both powder and nanofiber forms. • The methods in use were citrate sol gel and sol gel-assisted electrospinning. • Powders and nanofibers bear a nanostructured nature with a grain size less than 70 nm. • A model is suggested to describe microstructural evolution of synthetic products.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lu{sub 2}O{sub 3}:Eu{sup 3+} glass ceramic films: Synthesis, structural and spectroscopic studies

Graphical abstract: - Highlights: • Lu{sub 2}O{sub 3}:Eu{sup 3+}@SiO{sub 2} films were synthesized by sol–gel and by dip-coating technique. • Effects of incorporating PVP on structural properties were studied. • Effects of incorporating silica (SiO{sub 2}) luminescence characteristics were analyzed. • X-ray diffraction results showed that Lu{sub 2}O{sub 3}:Eu{sup 3+}@SiO{sub 2} crystallizes at 700 °C. • The 611 nm emission for the Lu:Si = 8:1 system presented an improvement. - Abstract: For the first time, transparent and crack free europium-doped lutetia silica sol–gel films were synthesized using the dip-coating technique on silica quartz substrates. In this study, we examined the effects of incorporating polyvinylpyrrolidone (PVP) and silica (SiO{sub 2}) into different precursor solutions for different Lu–Si molar ratios: 4:1, 6:1, 8:1 and 10:1. Different systems, such as Lu{sub 2}O{sub 3}:Eu{sup 3+}@SiO{sub 2} (using the above Lu:Si molar ratios), were synthesized by sol–gel and by dip-coating technique, employing acetylacetonate lutetium and tetraethylorthosilicate as Lu and Si precursors, in order to produce Lu{sub 2}O{sub 3}:Eu{sup 3+} (5 mol%)@SiO{sub 2} glass–ceramic films. The film microstructure was studied by microRaman spectroscopy (MRS) and X-ray diffraction (XRD) for different Lu:Si molar ratios on films annealed at 700 °C. X-ray diffraction results showed that the lutetium oxide cubic phase crystallizes in the silica matrix at 700 °C, and the crystallite size of Lu{sub 2}O{sub 3}:Eu{sup 3+}@SiO{sub 2} films varies from 5 nm to 17 nm according to the respective Lu:Si molar ratios. Opto-geometrical parameters determined by m-lines spectroscopy using a 632.5 nm He–Ne laser showed that the Eu{sup 3+} doped films heat-treated at 700 °C presented a thickness and density of 1.7 μm (8.8 g cm{sup −3}), 970 nm (9.2 g cm{sup −3}), 1 μm (9.3 g cm{sup −3}) and 1.3 μm (9.25 g cm{sup −3}) for the Lu:Si = 4:1, 6:1, 8:1 and 10:1 molar ratio systems, respectively. The Lu:Si = 8:1 system 611 nm emission presented an improvement. These results were provided by photoluminescent spectroscopy.

36 MATERIALS SCIENCE↗

A multi-prong approach towards the development of high performance Temperature sensor using MWCNTs/Al2O3 composite film

Highlights: • MWCNTs/Al{sub 2}O{sub 3} composite based self-standing highly sensitive temperature sensor. • Optimization of film thickness to achieve best performance of the device. • Effect of carrier drift under strong electron-phonon coupling is examined. • Non-contact measurements reveal possibilities of ambient environment monitoring. • Highly stable and reproducible response bidding commercial scale production. - Abstract: We report fabrication of high-performance temperature sensor from free-standing MWCNTs/Al{sub 2}O{sub 3} composite film where a multi-prong approach was undertaken to enhance sensor performance. Film thickness was varied until a threshold value was reached by playing surface-area to volume-ratio factor leading to enormous improvements in crucial sensor parameters–temperature coefficient of resistance (TCR) and thermal hysteresis. Increased TCR resulted in high sensitivity, ultrafast response and negligible hysteresis loss. Besides, effect of carrier-drift transport under strong electron-phonon scattering is investigated by permutation of channel-length and external DC bias. Observed TCR value is −0.96%/°C for 16.53 μm thick film, at 2 V applied-bias voltage for 1 mm channel-length. Moreover, the sensor exhibited negligible hysteresis loss along-with response and recovery times of ∼40 s and ∼185 s respectively. Non-contact mode temperature measurements also demonstrated excellent performance. Fabricated sensors exhibited good stability and negligible drift for six-months. These studies are significant towards fabricating simple, highly-sensitive, economic heat sensor with high reproducibility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of Geopolymer Composites Reinforced with Basalt Chopped Strand Mat or Woven Fabric

Geopolymers or polysialates are inorganic polymeric, ceramic‐like materials composed of alumina, silica, and alkali metal oxides that can be made without any thermal treatment. Additions of reinforcing phases vastly improve the mechanical properties and high‐temperature stability of the geopolymer. The processing and mechanical properties of both chopped strand mat as well as 2‐D woven fabric‐reinforced potassium geopolymer composites have been evaluated. Hand lay‐up and hydraulic press processing methods were used to produce composite panels. The room‐temperature tensile and flexural strength of chopped strand mat composites was 21.0 ± 3.1 and 31.7 ± 4.4 MP a, respectively, while those of basalt weave‐reinforced geopolymer composites reached 40.0 ± 5.9 and 45.2 ± 9.3 MP a, respectively. Composite microstructures were examined using optical microscopy as well as scanning electron microscopy ( SEM ). Mass, volume, and porosity fractions were also determined. The effect of high‐temperature treatments at 25°C, 300°C, 600°C, and 800°C were analyzed. Finally, Weibull statistical analysis was performed, which showed an increase in reliability when a reinforcement phase was added to K‐geopolymer.

Ribero, Daniel↗

Effects of transition metals on the evolution of polymer-derived SiOC ceramics

This work focuses on catalytic graphitization from different metals, iron (Fe), cobalt (Co), and nickel (Ni), for inducing carbon growth in silicon oxycarbides (SiOCs) during the pyrolysis. Fe, Co, and Ni-modified SiOCs were synthesized by pyrolysis to 900, 1100, and 1300 °C respectively in Ar. The transition metals induced the formation of the corresponding metal silicides, β-SiC, and graphitic carbon with the catalytic activity in the order of Fe > Co > Ni, in agreement with the activation energy calculation based on the carbon types and amounts. Lateral growth of turbostratic carbon followed a 2D grain growth process and its point-like defect density decreased based on the catalytic order of the transition metals, with SiOC/Fe having the lowest defect density. Quantitative analysis of the XPS results with Rietveld refinement illustrated that the phase separation of SiOC is more dominant than local carbothermal reduction between SiO 2 and C in the SiOC/M (M = Ni, Co, or Fe) systems. Understanding the catalytic graphitization effect of Ni, Co, and Fe on polymer derived ceramics offers new strategies in increasing high-temperature phase amounts and thus creating novel materials for heterogeneous catalysis, magnetic, and other applications.

36 MATERIALS SCIENCE↗

Ultra-thin multilayer capacitors.

The fabrication of ultra-thin lanthanum-doped lead zirconium titanate (PLZT) multilayer ceramic capacitors (MLCCs) using a high-power pulsed ion beam was studied. The deposition experiments were conducted on the RHEPP-1 facility at Sandia National Laboratories. The goal of this work was to increase the energy density of ceramic capacitors through the formation of a multilayer device with excellent materials properties, dielectric constant, and standoff voltage. For successful device construction, there are a number of challenging requirements including achieving correct stoichiometric and crystallographic composition of the deposited PLZT, as well as the creation of a defect free homogenous film. This report details some success in satisfying these requirements, although 900 C temperatures were necessary for PLZT perovskite phase formation. These temperatures were applied to a previously deposited multi-layer film which was then post-annealed to this temperature. The film exhibited mechanical distress attributable to differences in the coefficient of thermal expansion (CTE) of the various layers. This caused significant defects in the deposited films that led to shorts across devices. A follow-on single layer deposition without post-anneal produced smooth layers with good interface behavior, but without the perovskite phase formation. These issues will need to be addressed in order for ion beam deposited MLCCs to become a viable technology. It is possible that future in-situ heating during deposition may address both the CTE issue, and result in lowered processing temperatures, which in turn could raise the probability of successful MLCC formation.

36 MATERIALS SCIENCE↗

Fabrication and Characterization of Surrogate TRISO Particles Using 800μm ZrO 2 Kernels

In support of fully ceramic microencapsulated (FCM) fuel development, coating development work is ongoing at Oak Ridge National Laboratory (ORNL) to produce tri-structural isotropic (TRISO) coated fuel particles with both UN kernels and surrogate (uranium-free) kernels. The nitride kernels are used to increase fissile density in these SiC-matrix fuel pellets with details described elsewhere. The surrogate TRISO particles are necessary for separate effects testing and for utilization in the consolidation process development. This report focuses on the fabrication and characterization of surrogate TRISO particles which use 800μm in diameter ZrO 2 microspheres as the kernel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Numerical modeling of Joule heated ceramic melter

Computational fluid dynamics and heat transfer models of waste glass melters are being developed to support the vitrification campaign at the Waste Treatment and Immobilization Plant (WTP) as part of the United States nuclear waste stewardship and environmental protection programs. The WTP mission aims to achieve the stable and durable processing of vitrified waste in the safest, most efficient, and economical manner possible. Hanford’s tank waste is far more complex and varied than the waste treated by other vitrification facilities and both startup and long-term operational challenges are likely to be even greater than prior experience has shown. There are thousands of different waste compositions, which makes processing the waste a complex and challenging task. Models of test melters, pilot-scale, and full-scale melters have been developed to provide understanding and insight into the various physical and chemical phenomena occurring during vitrification. So the results of these modeling activities will be used to support the WTP operations to process legacy nuclear waste into a stable form for disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Separators - Technology review: Ceramic based separators for secondary batteries

Besides a continuous increase of the worldwide use of electricity, the electric energy storage technology market is a growing sector. At the latest since the German energy transition ('Energiewende') was announced, technological solutions for the storage of renewable energy have been intensively studied. Storage technologies in various forms are commercially available. A widespread technology is the electrochemical cell. Here the cost per kWh, e. g. determined by energy density, production process and cycle life, is of main interest. Commonly, an electrochemical cell consists of an anode and a cathode that are separated by an ion permeable or ion conductive membrane - the separator - as one of the main components. Many applications use polymeric separators whose pores are filled with liquid electrolyte, providing high power densities. However, problems arise from different failure mechanisms during cell operation, which can affect the integrity and functionality of these separators. In the case of excessive heating or mechanical damage, the polymeric separators become an incalculable security risk. Furthermore, the growth of metallic dendrites between the electrodes leads to unwanted short circuits. In order to minimize these risks, temperature stable and non-flammable ceramic particles can be added, forming so-called composite separators. Full ceramic separators, in turn, are currently commercially used only for high-temperature operation systems, due to their comparably low ion conductivity at room temperature. However, as security and lifetime demands increase, these materials turn into focus also for future room temperature applications. Hence, growing research effort is being spent on the improvement of the ion conductivity of these ceramic solid electrolyte materials, acting as separator and electrolyte at the same time. Starting with a short overview of available separator technologies and the separator market, this review focuses on ceramic-based separators. Two prominent examples, the lithium-ion and sodium-sulfur battery, are described to show the current stage of development. New routes are presented as promising technologies for safe and long-life electrochemical storage cells.

25 ENERGY STORAGE↗

Experimental investigation of thermal conductivity of high entropy ceramics

In this talk, we will present the experimental investigation of thermal conductivity of high entropy carbides (HEC) and borides (HEB) with different compositions. Thermal conductivity determines the capability of a material to transport thermal energy and is considered as one critical physical property, specially in the energy industry. Due to the presences of disordered cation sublattice, it is expected that thermal conductivity of high entropy ceramics is lower than the counterparts with simpler compositions, but the experimental studies are relatively few. Using laser-based spatial-domain and frequency-domain thermoreflectance technique, we measured thermal conductivity of HECs and HEBs in a temperature range from 77K to 773K. Furthermore, by focusing the laser using an objective lens, we were able to perform the thermal property mapping on samples with the spatial resolution of micrometer. Such measurements could reveal important microstructure information in a rapid and efficient way without using scanning electron microscopy. The high spatial resolution also enables thermal conductivity measurements on ion-irradiated HECs with the damage layer of merely 1.1µm. These measurements can provide valuable information to predict the performances of HECs and HEBs with different compositions and from different manufacturing processes, and in the extreme environments such as nuclear reactors.

36 - MATERIALS SCIENCE↗

Spent Fuel Reprocessing Development and Usage of Fission Products as Starting Precursor for Ceramic Waste-Forms - 16498

The principal purpose of spent fuel reprocessing consists in the recovery of the uranium and plutonium and the separation of fission products so as to allow re-use of fissile isotopes and waste preparing for disposal. Reprocessing is a series of chemical operations that separates plutonium and uranium from other constituents in nuclear waste. Indeed, the plutonium separated can be used to fuel reactors, but also to make nuclear weapons. Since reprocessing operations are far more expensive than using uranium fuel and disposing of the spent fuel directly, this process is not readily considered. Without doubts the reprocessing price of $1000 per kilogram of heavy metal (kgHM), like uranium must be less by at least 2-3 times compared to directly deposing the spent fuel. And some more simple technology (in comparison with PUREX process) must be developed, for example, technology based on precipitation processes. One of the options to change reprocessing technology is the idea to use certain fission products occurring in spent fuel in considerable amount and capable to form insoluble substances as suitable materials for long-term storage or final disposal of radioactive wastes. The development of new materials for HLW immobilization are intended to reduce disposal cost. The present work was aimed at the search for the simple engineering decisions that would provide opportunity of fission products usage as starting precursor for ceramic waste-forms. The results of experiments on synthesis of Pd-based metallo-ceramic compositions are presented in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Final project report for NEET pulsed ion beam project

The major goal of this project was to develop and demonstrate a novel experimental approach to access the dynamic regime of radiation damage formation in nuclear materials. In particular, the project exploited a pulsed-ion-beam method in order to gain insight into defect interaction dynamics by measuring effective defect interaction time constants and defect diffusion lengths. This project had the following four major objectives: (i) the demonstration of the pulsed ion beam method for a prototypical nuclear ceramic material, SiC; (ii) the evaluation of the robustness of the pulsed beam method from studies of defect generation rate effects; (iii) the measurement of the temperature dependence of defect dynamics and thermally activated defect-interaction processes by pulsed ion beam techniques; and (iv) the demonstration of alternative characterization techniques to study defect dynamics. As we describe below, all these objectives have been met.

36 MATERIALS SCIENCE↗