Search NASA⌕ Search

SEARCH · Search NASA

Results for “general linear methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Aircraft measurement of electric field - Self-calibration

Aircraft measurement of electric fields is difficult as the electrically conducting surface of the aircraft distorts the electric field. Calibration requires determining the relations between the undistorted electric field in the absence of the vehicle and the signals from electric field meters that sense the local distorted fields in their immediate vicinity. This paper describes a generalization of a calibration method which uses pitch and roll maneuvers. The technique determines both the calibration coefficients and the direction of the electric vector. The calibration of individual electric field meters and the elimination of the aircraft's self-charge are described. Linear combinations of field mill signals are examined and absolute calibration and error analysis are discussed. The calibration method was applied to data obtained during a flight near thunderstorms.

Winn, W. P.↗

Algorithmic Extensions of Low-Dispersion Scheme and Modeling Effects for Acoustic Wave Simulation

Accurate computation of acoustic wave propagation may be more efficiently performed when their dispersion relations are considered. Consequently, computational algorithms which attempt to preserve these relations have been gaining popularity in recent years. In the present paper, the extensions to one such scheme are discussed. By solving the linearized, 2-D Euler and Navier-Stokes equations with such a method for the acoustic wave propagation, several issues were investigated. Among them were higher-order accuracy, choice of boundary conditions and differencing stencils, effects of viscosity, low-storage time integration, generalized curvilinear coordinates, periodic series, their reflections and interference patterns from a flat wall and scattering from a circular cylinder. The results were found to be promising en route to the aeroacoustic simulations of realistic engineering problems.

Kaushik, Dinesh K.↗

Benchmarking of calculation schemes in APOLLO2 and COBAYA3 for WER lattices

This paper presents solutions of the NURISP WER lattice benchmark using APOLLO2, TRIPOLI4 and COBAYA3 pin-by-pin. The main objective is to validate MOC based calculation schemes for pin-by-pin cross-section generation with APOLLO2 against TRIPOLI4 reference results. A specific objective is to test the APOLLO2 generated cross-sections and interface discontinuity factors in COBAYA3 pin-by-pin calculations with unstructured mesh. The VVER-1000 core consists of large hexagonal assemblies with 2 mm inter-assembly water gaps which require the use of unstructured meshes in the pin-by-pin core simulators. The considered 2D benchmark problems include 19-pin clusters, fuel assemblies and 7-assembly clusters. APOLLO2 calculation schemes with the step characteristic method (MOC) and the higher-order Linear Surface MOC have been tested. The comparison of APOLLO2 vs. TRIPOLI4 results shows a very close agreement. The 3D lattice solver in COBAYA3 uses transport corrected multi-group diffusion approximation with interface discontinuity factors of Generalized Equivalence Theory (GET) or Black Box Homogenization (BBH) type. The COBAYA3 pin-by-pin results in 2, 4 and 8 energy groups are close to the reference solutions when using side-dependent interface discontinuity factors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A stochastic perturbation method to generate inflow turbulence in large-eddy simulation models: Application to neutrally stratified atmospheric boundary layers

Despite the variety of existing methods, efficient generation of turbulent inflow conditions for large-eddy simulation (LES) models remains a challenging and active research area. Herein, we extend our previous research on the cell perturbation method, which uses a novel stochastic approach based upon finite amplitude perturbations of the potential temperature field applied within a region near the inflow boundaries of the LES domain [Muñoz-Esparza et al., “Bridging the transition from mesoscale to microscale turbulence in numerical weather prediction models,” Boundary-Layer Meteorol., 153, 409–440 (2014)]. The objective was twofold: (i) to identify the governing parameters of the method and their optimum values and (ii) to generalize the results over a broad range of atmospheric large-scale forcing conditions, U{sub g} = 5 − 25 m s{sup −1}, where U{sub g} is the geostrophic wind. We identified the perturbation Eckert number, Ec=U{sub g}{sup 2}/ρc{sub p}θ{sup ~}{sub pm}, to be the parameter governing the flow transition to turbulence in neutrally stratified boundary layers. Here, θ{sup ~}{sub pm} is the maximum perturbation amplitude applied, c{sub p} is the specific heat capacity at constant pressure, and ρ is the density. The optimal Eckert number was found for nonlinear perturbations allowed by Ec ≈ 0.16, which instigate formation of hairpin-like vortices that most rapidly transition to a developed turbulent state. Larger Ec numbers (linear small-amplitude perturbations) result in streaky structures requiring larger fetches to reach the quasi-equilibrium solution, while smaller Ec numbers lead to buoyancy dominated perturbations exhibiting difficulties for hairpin-like vortices to emerge. Cell perturbations with wavelengths within the inertial range of three-dimensional turbulence achieved identical quasi-equilibrium values of resolved turbulent kinetic energy, q, and Reynolds-shear stress, . In contrast, large-scale perturbations acting at the production range exhibited reduced levels of , due to the formation of coherent streamwise structures, while q was maintained, requiring larger fetches for the turbulent solution to stabilize. Additionally, the cell perturbation method was compared to a synthetic turbulence generator. The proposed stochastic approach provided at least the same efficiency in developing realistic turbulence, while accelerating the formation of large-scales associated with production of turbulent kinetic energy. Also, it is computationally inexpensive and does not require any turbulent information.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On linearization and preconditioning for radiation diffusion coupled to material thermal conduction equations

Jacobian-free Newton–Krylov (JFNK) method is an effective algorithm for solving large scale nonlinear equations. One of the most important advantages of JFNK method is that there is no necessity to form and store the Jacobian matrix of the nonlinear system when JFNK method is employed. However, an approximation of the Jacobian is needed for the purpose of preconditioning. In this paper, JFNK method is employed to solve a class of non-equilibrium radiation diffusion coupled to material thermal conduction equations, and two preconditioners are designed by linearizing the equations in two methods. Numerical results show that the two preconditioning methods can improve the convergence behavior and efficiency of JFNK method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and dynamics of ion clusters in linear octupole traps: Phase diagrams, chirality, and melting mechanisms

The stable structures and melting dynamics of clusters of identical ions bound by linear octupole radiofrequency traps are theoretically investigated by global optimization methods and molecular dynamics simulations. By varying the cluster sizes in the range of 10-1000 ions and the extent of trap anisotropy by more than one order of magnitude, we find a broad variety of stable structures based on multiple rings at small sizes evolving into tubular geometries at large sizes. The binding energy of these clusters is well represented by two contributions arising from isotropic linear and octupolar traps. The structures generally exhibit strong size effects, and chiral arrangements spontaneously emerge in many crystals. Sufficiently large clusters form nested, coaxial tubes with different thermal stabilities. As in isotropic octupolar clusters, the inner tubes melt at temperatures that are lower than the overall melting point.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Assessing the large-scale drivers of precipitation in the northeastern United States via linear orthogonal decomposition

This study examines the linear orthogonal modes associated with monthly precipitation in the northeastern United States, from CESM1 LENS (35 ensemble members, 1979–2005) and two reanalysis datasets (ERA5, 1950–2018 and NOAA-CIRES-DOE 20CRv3, 1950–2015). Calendar months are aggregated together, and any linear trends in data are removed. Using region-averaged precipitation anomaly time series and monthly anomalies for several global 2D atmospheric fields, a linear orthogonal decomposition method is implemented to iteratively extract time series (based on field and geographic location) of absolute maximum correlation. Linear modes associated with this method are then projected onto the full set of 2D fields to provide physical insight into the mechanisms involved in generating precipitation. In this region, the first mode is associated with vapor transport from the Atlantic seaboard, the second mode is characterized by westward vapor transport associated with extratropical cyclones, and the third mode captures vapor transport from the Gulf of Mexico during the fall and winter. However, the third mode is less robust in the spring and summer. Results are generally consistent across the datasets, and applying multiple linear regression with the linear modes to predict the precipitation anomalies produces R-squared values of around 0.54–0.65 for CESM1 LENS, and around 0.58–0.88 for reanalysis, with the lowest values generally in the spring and late summer. The influence of low-frequency climate variability on the modes is considered for CESM1 LENS, and the modes in late winter can be predicted with some success via a combination of several, prominent large-scale teleconnection patterns.

54 ENVIRONMENTAL SCIENCES↗

Revisit to Grad's Closure and Development of Physically Motivated Closure for Phenomenological High-Order Moment Model

The Grad's closure for the high-order moment equation is revisited and, by extending his theory, a physically motivated closure is developed for the one-dimensional velocity shear gas flow. The closure is based on the physical argument of the relative importance of various terms appearing in the moment equation. Also, the closure is derived such that the resulting theory may be inclusive of the well established linear theory (Navier-Stokes-Fourier) as limiting case near local thermal equilibrium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Classification of constraints and degrees of freedom for quadratic discrete actions

We provide a comprehensive classification of constraints and degrees of freedom for variational discrete systems governed by quadratic actions. This classification is based on the different types of null vectors of the Lagrangian two-form and employs the canonical formalism developed in Dittrich and Höhn [“Constraint analysis for variational discrete systems,” J. Math. Phys. 54, 093505 (2013); e-print http://arxiv.org/abs/arXiv:1303.4294 [math-ph]] and Höhn [“Quantization of systems with temporally varying discretization I: Evolving Hilbert spaces,” J. Math. Phys. 55, 083508 (2014); e-print http://arxiv.org/abs/arXiv:1401.6062 [gr-qc]]. The analysis is carried out in both the classical and quantum theory and applies to systems with both temporally varying or constant discretization. In particular, it is shown explicitly how changes in the discretization, e.g., resulting from canonical coarse graining or refining operations or an evolving background geometry, change the dynamical content of the system. It is demonstrated how, on a temporally varying discretization, constraints, Dirac observables, symmetries, reduced phase spaces, and physical Hilbert spaces become spacetime region dependent. These results are relevant for free field theory on an evolving lattice and linearized discrete gravity models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A method for the selection of a functional form for a thermodynamic equation of state using weighted linear least squares stepwise regression

A method was developed for establishing a rational choice of the terms to be included in an equation of state with a large number of adjustable coefficients. The methods presented were developed for use in the determination of an equation of state for oxygen and nitrogen. However, a general application of the methods is possible in studies involving the determination of an optimum polynomial equation for fitting a large number of data points. The data considered in the least squares problem are experimental thermodynamic pressure-density-temperature data. Attention is given to a description of stepwise multiple regression and the use of stepwise regression in the determination of an equation of state for oxygen and nitrogen.

Jacobsen, R. T.↗

Uncertainty relations, zero point energy and the linear canonical group

The close relationship between the zero point energy, the uncertainty relations, coherent states, squeezed states, and correlated states for one mode is investigated. This group-theoretic perspective enables the parametrization and identification of their multimode generalization. In particular the generalized Schroedinger-Robertson uncertainty relations are analyzed. An elementary method of determining the canonical structure of the generalized correlated states is presented.

Sudarshan, E. C. G.↗

Analysis of Nonclassical Fracture Problems for Prestressed Bodies with Interacting Cracks

We consider two types of nonclassical fracture mechanisms, namely, the fracture of cracked bodies with initial (residual) stresses acting along the crack planes and the fracture of solids under compression along parallel cracks. To investigate nonaxisymmetric and axisymmetric problems for infinite solids containing two parallel coaxial cracks or a periodic set of coaxial parallel cracks, we use a combined analytic-numerical method within the framework of the three-dimensional linearized mechanics of solids. The analysis involves the representation of stresses and displacements in the linearized theory via harmonic potential functions. With the use of the integral Fourier–Hankel transformations, the problems are reduced to the solution of Fredholm integral equations of the second kind. This approach allows us to investigate problems in a unified general form for compressible and noncompressible homogeneous isotropic or transversely isotropic elastic bodies with an arbitrary structure of the elastic potential, and the material specification of the model is carried out only in the stage of numerical analysis of the resolving equations obtained in the general form. The effects of initial stresses on the stress intensity factors are analyzed for highly elastic materials and layered composites (modeled as transversely isotropic elastic bodies). The “resonance-like” effects are revealed when compressive initial stresses reach the values corresponding to the local loss of stability of the material in the vicinity of cracks, which, according to the indicated combined method, allows one to determine the critical (limiting) load parameters under the conditions of compression of the body along the cracks. The conclusions concerning the dependences of the stress intensity factors and critical (limiting) parameters of compression on the geometric parameters of the problems are formulated as well as concerning the dependences on physical and mechanical characteristics of the materials.

42 ENGINEERING↗

A General Method for Estimating Bulk 2D Projections of Ice Particle Shape: Theory and Applications

The orientation of falling ice particles directly influences estimates of microphysical and radiative bulk quantities as well as in situ retrievals of size, shape, and mass. However, retrieval efforts and bulk calculations often incorporate very basic orientations or ignore these effects altogether. To address this deficiency, this study develops a general method for projecting bulk distributions of particle shape for arbitrary orientations. The Amoroso distribution provides the most general bulk aspect ratio distribution for gamma-distributed particle axis lengths. The parameters that govern the behavior of this aspect ratio distribution depend on the assumed relationship between mass, maximum dimension, and aspect ratio. Individual spheroidal geometry allows for eccentricity quantities to linearly map onto ellipse analogs, whereas aspect ratio quantities map nonlinearly. For particles viewed from their side, this analytic distinction leads to substantially larger errors in projected aspect ratio than for projected eccentricity. Distribution transformations using these mapping equations and numerical integration of projection kernels show that both truncation of size distributions and changes in Gaussian dispersion can alter the modality and shape of projection distributions. As a result, the projection process can more than triple the relative entropy between the spheroidal and projection distributions for commonly assumed model and orientation parameters. This shape uncertainty is maximized for distributions of highly eccentric particles and for particles like aggregates that are thought to fall with large canting-angle deviations. As a result, the methods used to report projected aspect ratios and the corresponding values should be questioned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of commercial scale photonuclear production of radioisotopes

Photonuclear production of radioisotopes driven by bremsstrahlung photons using a linear electron accelerator in the suitable energy range is a promising method for producing radioisotopes. The photonuclear production method is capable of making radioisotopes more conveniently, cheaply and with much less radioactive waste compared to existing methods. Historically, photo-nuclear reactions have not been exploited for isotope production because of the low specific activity that is generally associated with this production process, although the technique is well-known to be capable of producing large quantities of certain radioisotopes. We describe an optimization technique for a set of parameters to maximize specific activity of the final product. This set includes the electron beam energy and current, the end station design (an integrated converter and target as well as cooling system), the purity of materials used, and the activation time. These parameters are mutually dependent and thus their optimization is not trivial. {sup 67}Cu photonuclear production via {sup 68}Zn({gamma}p){sup 67}Cu reaction was used as an example of such an optimization process.

07 ISOTOPE AND RADIATION SOURCES↗

Closures for Two-fluid Five-moment Equations for Magnetized Plasmas (Final Scientific Report)

In the proposed work, we will develop a complete set of closures for two-fluid five-moment equations for magnetized plasmas. Specifically, we propose to obtain explicit formulas for electrons and ions to express heat flow, viscosity, frictional force, and collisional heating in terms of density, and temperature, flow velocity. For this purpose, we solve a set of general moment equations for the relevant closure moments. An infinite hierarchy of general moment equations is completely equivalent to the original Landau-Fokker-Planck kinetic equation. In the small gyro-period expansion, the parallel components of the general moment equations agree with the moments of the drift-kinetic equation (DKE). The advantages of solving the moment equations include (i) an exact treatment of the collision operator, (ii) closure and transport relations with no flux-surface average, and (iii) a unified form of closures for general collisionality. Practically we solve a truncated set of moment equations and hence must verify the convergence of the solutions by increasing number of moments. The parallel integral (nonlocal) closures obtained by solving a set of linearized parallel moment equations are useful only when the nonlinear coupling of moments to the temperature and magnetic field gradient terms is negligible. When the nonlinear coupling terms are substantial, we propose a Fourier transform method to solve the parallel moment equations. By Fourier-expanding the magnetic field, we can convert the differential equations of parallel moments to linear algebraic equations for Fourier components of the moments. The convergence of the solutions can be confirmed by increasing the number of Fourier modes. Our preliminary study in axisymmetric circular magnetic geometry with a large aspect ratio shows that (i) the solutions for Fourier modes n=0 and n=1 converge when modes up to n=2 are included in the expansion, and (ii) lower collisionality requires more moments for convergent closures, as in the case of the integral closures. The proposed work will start from this simple magnetic geometry to find general parallel closures and then be generalized to explore a non-circular magnetic field with finite aspect-ratio. With parallel moments known, the perpendicular component of moment closures can be obtained by inverting the generalized cross product operator in the general moment equations. These efforts will be performed in conjunction with several multi-institutional projects, NIMROD, the Center for Extended MHD Modeling (CEMM), and the Plasma Science and Innovation (PSI) Center.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic isotropic hyperfine properties for second row elements (Al–Cl)

Isotropic hyperfine properties have been obtained for the second row elements Al–Cl using a systematic composite approach consisting of a sequence of core/valence correlation consistent basis sets, up through aug-cc-pCV7Z, along with configuration interaction and coupled cluster methods. The best nonrelativistic final values for the atomic ground states (in MHz) are -1.80 27 Al ( 2 P o 1/2 ), -24.31 29 Si ( 3 P 0 ), 63.70 31 P ( 4 So 3/2 ), 20.77 33 S ( 3 P 2 ), and 35.42 35 Cl ( 2 P o 3/2 ). We find a large K shell contribution to the spin density at the nucleus that is almost canceled by the L and M shell contributions. The spin density in atomic units is approximately linear with respect to the atomic number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Investigation of Structural Stability and Electronic and Magnetic Properties of the Half-Heusler Alloys: MTiSb (M = Fe, Co, and Ni)

The structural, electronic, and magnetic properties of the half-Heusler MTiSb (M = Fe, Co, Ni) compounds have been examined using the first-principles calculations with the full-potential linear augmented plane wave (FP-LAPW) method within the density functional theory. The electronic structures and magnetic properties of MTiSb (M = Fe, Co, Ni) are studied. It is found that the calculated lattice parameter is in good agreement with the theoretical values. Using the general gradient approximation (GGA), we observe that for the three compounds, the α phase is more stable than β and γ phases. CoTiSb is a semiconductor, NiTiSb is a metal, while the FeTiSb compound is a half-metallic, and the total magnetic moments are 0.00085, − 0.26074, and 0.99353 μ B, respectively, which is in agreement with the Slater–Pauling rule, Furthermore, the origin for the appearance of the half-metallic band gap in the FeTiSb compound was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A linear response framework for quantum simulation of bosonic and fermionic correlation functions

Response functions are a fundamental aspect of physics; they represent the link between experimental observations and the underlying quantum many-body state. However, this link is often under-appreciated, as the Lehmann formalism for obtaining response functions in linear response has no direct link to experiment. Within the context of quantum computing, and via a linear response framework, we restore this link by making the experiment an inextricable part of the quantum simulation. This method can be frequency- and momentum-selective, avoids limitations on operators that can be directly measured, and can be more efficient than competing methods. As prototypical examples of response functions, we demonstrate that both bosonic and fermionic Green’s functions can be obtained, and apply these ideas to the study of a charge-density-wave material on the ibm_auckland superconducting quantum computer. The linear response method provides a robust framework for using quantum computers to study systems in physics and chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗