Search NASA⌕ Search

SEARCH · Search NASA

Results for “hardness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

HYBRID simulations of diffraction-limited focusing with Kirkpatrick-Baez mirrors for a next-generation In Situ hard X-ray nanoprobe

Next-generation hard X-ray nanoprobe beamlines such as the In Situ Nanoprobe (ISN) beamline being planned at the Advanced Photon Source aim at providing very high spatial resolution while also enabling very high focused flux, to study complex materials and devices using fast, multidimensional imaging across many length scales. The ISN will use diffractive optics to focus X-rays with a bandpass of ΔE/E = 10 –4 into a focal spot of 20 nm or below. Reflective optics in Kirkpatrick-Baez geometry will be used to focus X-rays with a bandpass as large as ΔE/E = 10 –2 into a focal spot of 50 nm. Diffraction-limited focusing with reflective optics is achieved by spatial filtering and use of a very long, vertically focusing mirror. Furthermore, to quantify the performance of the ISN beamline, we have simulated the propagation of both partially and fully coherent wavefronts from the undulator source, through the ISN beamline and into the mirror-based focal spot. Simulations were carried out using the recently developed software “HYBRID.”

43 PARTICLE ACCELERATORS↗

Precipitation of Carbides and Dissolution of Widmanstätten Structure for Enhanced Hardness in Ti{sub 2}AlNb-Based Alloys

Carbide-reinforced Ti{sub 2}AlNb matrix composites were spark plasma sintered at 1100 °C by incorporating CNTs into single-B2-phase Ti-22Al-25Nb powders. The as-SPSed alloys were solution treated and then aged in different phase regions. By kinetics analysis and energy-dispersive spectroscopy, it is found carbon will stabilize α{sub 2} phase during solution treatment, and the formation of carbide results in the Nb-depleted regions, which further induces the formation of curly B2 + O Widmanstätten structure during quenching. Different from the general Widmanstätten structure in the aged Ti{sub 2}AlNb alloy, the remained α{sub 2} will consume the B2 within the Widmanstätten structure, when the carbon-added alloy is aged in B2 + O phase region. Compared to the alloy without CNTs, the Vickers hardness of the aged carbon-added Ti{sub 2}AlNb alloy is increased significantly, which is related to the uniform and abundant columnar carbides within the O-phase matrix.

36 MATERIALS SCIENCE↗

Evolution of the Microstructure and Hardness of Fe-8Cr-2.1Mo-Si-V Die Steel at Different Cooling Rates after Hot Deformation

In this study, the effect of microstructure evolution, especially that involving the proeutectoid carbides, on hardness distribution of ledeburite steel containing 8% chromium content was investigated at different cooling rates after hot deformation. The continuous cooling transformation was carried out using a fully automatic transformation measuring apparatus under cooling rates in the range of 0.03-80 °C/s. The transformation temperatures, Ac1, Ac3 and Ms, were measured by dilatometry. A nanoindentation test was employed to evaluate the mechanical properties of the cooled specimens. The evolution of microstructure indicated that the proportion trend of the precipitated carbides was dependent on the cooling rates. In addition, a mixture of pearlite and proeutectoid carbides was observed under slow cooling rates in the range of 0.03-0.2 °C/s, for which only a martensite transformation took place in austenite, and the proeutectoid carbides precipitated negligibly at cooling rates greater than or equal to 10 °C/s. The results also showed that the nanohardness significantly decreased and then slowly increased to a stable value with increasing cooling rates, which was similar to the content trend of the carbides that precipitated during the cooling process.

36 MATERIALS SCIENCE↗

Experimental Study on Microstructure and Hardness of Pure Titanium Subjected to Torsion Deformation at Different Temperatures

The studies of mechanical property, microstructure evolution and fracture analysis in pure titanium processed by torsion deformation at 298, 673 and 1073 K are conducted systematically. The variations of mechanical property of deformed pure titanium are shown through Vickers hardness evaluation. During torsion at 298 K, the grains are refined and elongated, but the α phase with different shapes precipitates for twisted samples at 673 and 1073 K. The fracture appearance indicates that the elongated dimples occur on fracture surface at 298 K. Besides, a large number of shear facets are arranged. However, typical intergranular fracture appearance with lots of blocks in polyhedral shape covers the fracture surface at 673 and 1073 K, respectively.

36 MATERIALS SCIENCE↗

Hardness and shear band evolution in bulk metallic glasses after plastic deformation and annealing

Strain-induced hardening and annealing-induced softening are typical in crystalline metals. Bulk metallic glasses (BMG) exhibit the opposite behavior, namely, strain-induced softening and annealing-induced hardening. In addition, reversible softening-hardening-softening occurs in a BMG subjected to a three-step deformation-annealing-deformation process. The hardness changes after deformation and annealing can be correlated with the shear band patterns around/underneath Vickers indents. Shear bands produced during indentation of as-cast BMG are semicircular and radial, consistent with the stress distribution beneath the indenter. In contrast, the shear bands in the pre-strained BMG are irregular and convoluted, and appear to be a mixture of the shear bands produced during the prior compression and those in the as-cast BMG. After annealing, the shear bands tend to recover their semicircular and radial shapes consistent with the annealing-induced hardening.

36 MATERIALS SCIENCE↗

Crystal misorientation correlates with hardness in tooth enamels

The multi-scale hierarchical structure of tooth enamel enables it to withstand a lifetime of damage without catastrophic failure. While many previous studies have investigated structure-function relationships in enamel, the effects of crystal misorientation on mechanical performance have not been assessed. To address this issue, in the present study, we review previously published polarization-dependent imaging contrast (PIC) maps of mouse and human enamel, and parrotfish enameloid, in which crystal orientations were measured and displayed in every 60-nm-pixel. By combining those previous results with the PIC maps of sheep enamel presented here we discovered that, in all enamel(oid)s, adjacent crystals are slightly misoriented, with misorientation angles in the 0°-30° range, and mean 2°-8°. Within this limited range, misorientation is positively correlated with literature hardness values, demonstrating an important structure-property relation, not previously identified. At greater misorientation angles 8°30°, this correlation is expected to reverse direction, but data from different non-enamel systems, with more diverse crystal misorientations, are required to determine if and where this occurs.

36 MATERIALS SCIENCE↗

Pollen structure visualization using high-resolution laboratory-based hard X-ray tomography

A laboratory-based X-ray microscope is used to investigate the 3D structure of unstained whole pollen grains. For the first time, high-resolution laboratory-based hard X-ray microscopy is applied to study pollen grains. Based on the efficient acquisition of statistically relevant information-rich images using Zernike phase contrast, both surface- and internal structures of pine pollen - including exine, intine and cellular structures - are clearly visualized. The specific volumes of these structures are calculated from the tomographic data. The systematic three-dimensional study of pollen grains provides morphological and structural information about taxonomic characters that are essential in palynology. Such studies have a direct impact on disciplines such as forestry, agriculture, horticulture, plant breeding and biodiversity. - Highlights: • The unstained whole pine pollen was visualized by high-resolution laboratory-based HXRM for the first time. • The comparison study of pollen grains by LM, SEM and high-resolution laboratory-based HXRM. • Phase contrast imaging provides significantly higher contrast of the raw images compared to absorption contrast imaging. • Surface and internal structure of the pine pollen including exine, intine and cellular structures are clearly visualized. • 3D volume data of unstained whole pollen grains are acquired and the specific volumes of the different layer are calculated.

60 APPLIED LIFE SCIENCES↗

Effect of H[subscript 2]O on the density of silicate melts at high pressures: Static experiments and the application of a modified hard-sphere model of equation of state

Density of ultramafic silicate melts was determined using the sink/float technique at high pressures. Seven melt compositions were studied, among which three were dry compositions with different Mg's (molar MgO/(MgO + FeO) x 100) and the other four were hydrous compositions synthesized by adding 2-7 wt.% H{sub 2}O to the anhydrous ones. Experimental conditions range from 9 to 15 GPa and from 2173 to 2473 K. The sinking and floatation of density markers were observed for all melt compositions. Melt density data were analyzed by applying the Birch-Murnaghan equation of state and a newly developed equation of state for silicate melts based on the model of hard sphere mixtures. The presence of water can significantly reduce the density of melts due to its small molecular mass. On the other hand, water makes hydrous silicate melts more compressible than anhydrous melts and therefore the effect of H{sub 2}O on melt density is less significant at high pressures. The density of hydrous melts was then calculated as a function of H{sub 2}O content at the conditions of the bottom of the upper mantle, and was compared with the density of the dominant upper mantle minerals. Results show that the conditions for a negatively buoyant melt that coexists with a pyrolite mantle atop the 410 km discontinuity are marginally satisfied if H{sub 2}O is the only volatile component to facilitate melting, but such conditions will be satisfied by a broader range of conditions when other heavier volatile elements (C, K, etc.) are also present.

58 GEOSCIENCES↗

Cryo-quenched Fe–Ni–Cr alloy decorative steel single crystals II: Alloy phases, structure, hardness, tensile, tribological, magnetic and electronic properties

We have previously reported (Boatner et al., J. Alloys Compd. 691 (2017) 666–671) on the discovery, formation, processing, and application of a new decorative ternary steel alloy and on its use in a wide range of practical applications including: custom and commercial knives, art objects, jewelry, electronics, and furniture. This decorative property results when polished single crystals of the 70 wt%Fe-15 wt%Ni-15 wt% Cr austenitic alloy are cryo-quenched into the martensitic phase resulting in the formation of a three-dimensional raised pattern of mixed austenitic/martensitic laths. These laths propagate across large dimensions of the material due to the absence of grain boundaries in the single crystal. The macroscopic optically reflective 3-D decorative pattern reproduces the structural symmetry inherent in the single-crystal orientation. This pattern results solely from the metallurgical phase properties of the ternary alloy and is completely distinct from the properties of Damascus steels or more modern so-called pattern-welded steels. Here we use X-ray diffraction, nanoindentation, hardness measurements/scratch testing, tribological measurements, and alloy resistivity and magnetization methods to obtain a more fundamental and comprehensive study of the effects of the austenitic/martensitic phase transition on the structural and physical properties of the 70 wt%Fe-15 wt%Ni-15 wt% Cr alloy. These results reveal new insight into irreversible phenomena that are associated with the inhibited phase transition on heating of the two-phase, mixed austenitic/martensitic structure that is formed subsequent to cryo-quenching the alloy crystal to 77 K.

36 MATERIALS SCIENCE↗

Structural distortion and band gap opening of hard MnB{sub 4} in comparison with CrB{sub 4} and FeB{sub 4}

MnB{sub 4} was newly synthesized to crystallize in a monoclinic P2{sub 1}/c structure, different from previous experimental and theoretical reports. Here, based on first-principles calculations, we perform a comparative study of geometric and energetic features, mechanical behaviors, electronic property and chemical bonding of the experimentally identified monoclinic MnB{sub 4}, as well as orthorhombic CrB{sub 4} and FeB{sub 4}. The results demonstrate that the presence of distorted rhomboidal-B{sub 4} units and one-dimensional Mn chains in the monoclinic MnB{sub 4} breaks the structural symmetry and lowers the total energy in comparison to the orthorhombic phase. The opening of band gap in MnB{sub 4} is induced by Peierls-paired Mn atoms, differing from the metallic behaviors of recently studied tetraborides. Specifically, the preservations of covalent bonding in distorted boron-rhomboids in MnB{sub 4} explain the relatively higher incompressibility and hardness. - Graphical abstract: P2{sub 1}/c-type structure for MnB{sub 4} characterizes rhomboid-B{sub 4} units and alternately short and long Mn–Mn chains. - Highlights: • The novel P2{sub 1}/c-type MnB{sub 4} compound is studied by first-principles calculations. • P2{sub 1}/c-type MnB{sub 4} has lower total energy and relatively higher stability. • An energy gap opening is found for P2{sub 1}/c-type MnB{sub 4} induced by Mn atom pairs. • P2{sub 1}/c-type MnB{sub 4} exhibits excellent mechanical properties. • The mechanical properties of TcB{sub 4} and ReB{sub 4} in P2{sub 1}/c structure are also studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of double aging heat treatment on the microstructure, Vickers hardness and elastic modulus of Ti-Nb alloys

Aging heat treatment can be a good way to optimize mechanical properties, changing the microstructure, and hence, the mechanical behavior of Ti alloys. The effects of aging heat treatments on {beta}-type Ti-30Nb alloy were investigated to evaluate the kinetics of {alpha}'' {yields} {alpha} + {beta} transformation. The results obtained from differential scanning calorimetry and high-temperature X-ray diffraction experiments indicated the complete decomposition of orthorhombic {alpha}'' phase at close to 300 deg. C, followed by {alpha} phase precipitation at 470 deg. C. The aging heat treatments also enabled us to observe a transformation sequence {alpha}'' {yields} {beta} + {omega} {yields} {beta} + {omega} + {alpha}, indicating martensite decomposition and {omega} phase precipitation at 260 deg. C after 2 h, followed by {alpha} phase nucleation after heating at 400 deg. C for 1 h. The elastic modulus and Vickers hardness of Ti-30Nb alloy were found to be very sensitive to the microstructural changes caused by heat treatment. - Highlights: {yields} DSC and XRD shed light on the {alpha}'' decomposition and nucleation of {omega} and {alpha} phases. {yields} Aging allows for {alpha}''{yields}{beta} transformation and nucleation of {omega} dispersed in the {beta} matrix. {yields} During aging, {alpha}'' interplanar distances are reduced to enable {beta} phase nucleation. {yields} Mechanical behavior is dependent on the microstructure and the phases in the alloy. {yields} It is not possible to obtain high strength and low elastic modulus by applying aging.

36 MATERIALS SCIENCE↗

Pulse electrodeposited nickel using sulphamate electrolyte for hardness and corrosion resistance

Highlights: • Nickel deposits from sulphamate solutions using pulse method are prepared. • Effect of duty cycle and frequency are studied. • XRD, SEM and AFM of the nickel deposits are characterized. • Corrosion characteristics of the nickel deposit are reported. - Abstract: Nickel deposits have been obtained on mild steel substrate by pulse current (PC) electrodeposition method using nickel sulphamate electrolyte. Micro hardness values increased with decreasing duty cycle and pulse frequency. X-ray diffraction studies revealed that (2 0 0) plane was predominant and the nickel deposit obtained at low duty cycle and low frequency has the smallest grain size. The surface morphology of the coatings was explored by scanning electron microscopy (SEM) and atomic force microscopy. These studies showed that the microstructure of the nickel coatings changed from pyramidal structure to homogeneous structure with increasing duty cycle and pulse frequencies. The corrosion resistance of coatings was evaluated by potentiodynamic polarization and electrochemical impedance studies in 3.5 wt% sodium chloride (NaCl) solutions. An enhancement of the corrosion resistance, charge-transfer resistance and wear resistance has been obtained at low duty cycle and low frequencies.

36 MATERIALS SCIENCE↗

Radiation-hard miniature optical engine with high bandwidth

Future silicon trackers will be operated in an intense radiation environment and require large volumes of data to be transmitted off detector. In addition, the optical modules must be of low mass in order to limit multiple scattering and nuclear interactions that would degrade the overall performance of the detector. Here, we present a miniature optical engine that satisfies these constraints. The optical engine consists of an ASIC driving a VCSEL (Vertical Cavity Surface Emitting Laser) array in an optical package. Two ASICs are designed to operate a 12-channel VCSEL array at 1.28 or 5.12 Gb/s per channel, which yields a total data rate of up to 60 Gb/s. The core transistors are fabricated in a 65 nm CMOS process which enhance the radiation-hardness. Each channel contains equalizer (CTLE) and clock-data recovery circuits (CDR) so that the ASIC can restore the highly distorted electrical signal after propagating through several meters of cables of small diameter. The equalizer, CDR, and VCSEL driver are configured via a digital I 2 C chip interface with triple redundant memory to mitigate single event upset (SEU) effects. The bias and modulation currents are controlled by a digital-to-analog converter (DAC). We present the design of the circuit together with the results of the simulations and preliminary measurements.

47 OTHER INSTRUMENTATION↗

Elucidating the electronic structure of supported gold nanoparticles and its relevance to catalysis by means of hard X-ray photoelectron spectroscopy

We report on the electronic structure of Au (gold) nanoparticles supported onto TiO 2 with a goal of elucidating the most important effects that contribute to their high catalytic activity. We synthesize and characterize with high resolution transmission electron microscopy (HRTEM) 3.4, 5.3, and 9.5 nm diameter TiO 2 -supported Au nanoparticles with nearly spherical shape and measure their valence band using Au 5d subshell sensitive hard X-ray photoelectron spectroscopy (HAXPES) conducted at Spring-8. Based on density functional theory (DFT) calculations of various Au surface structures, we interpret the observed changes in the Au 5d valence band structure as a function of size in terms of an increasing percentage of Au atoms at corners/edges for decreasing particle size. Finally, this work elucidates how Au coordination number impacts the electronic structure of Au nanoparticles, ultimately giving rise to their well-known catalytic activity.

36 MATERIALS SCIENCE↗

Analysis of an ultra hard magnetic biomineral in chiton radular teeth

Recent analyses of the ultrastructural and mechanical properties of mineralized biological materials have demonstrated some common architectural features that can help explain their observed damage tolerance. Nature has accomplished this feat through the precise control of anisotropic crystal nucleation and growth processes in conjunction with nanoscale control over the self-assembly of spatially distinct organic and inorganic phases, resulting in effective inhibition of crack propagation through these materials. One such example is found in the hyper-mineralized and abrasion resistant radular teeth of the chitons, a group of herbivorous marine mollusks who have the surprising capacity to erode away the rocky substrates on which they graze. Through the use of modern microscopy and nanomechanical characterization techniques, we describe the architectural and mechanical properties of the radular teeth from Cryptochiton stelleri. Chiton teeth are shown to exhibit the largest hardness and stiffness of any biominerals reported to date, being notably as much as three-fold harder than human enamel and the calcium carbonate-based shells of mollusks. We explain how the unique multi-phasic design of these materials contributes not only to their functionality, but also highlights some interesting design principles that might be applied to the fabrication of synthetic composites.

36 MATERIALS SCIENCE↗

Effect of the Segmental Structure of Thermoplastic Polyurethane (Hardness) on the Interfacial Adhesion of Textile-Grade Carbon Fiber Composites

In polymer composites, the fiber–matrix interface is primarily influenced by the surface treatment of the fibers and polymer morphology. Previous studies have investigated the effect of surface treatment of carbon fiber on the mechanical properties of the resulting composites. However, very few studies have explored the chemical structural modification of polymer effect on the fiber–matrix adhesion. In this work, the interfaces of soft thermoplastic polyurethane (S-TPU) and hard-segmented TPU (H-TPU) were investigated through surface, thermal, and mechanical characterization. A textile-grade carbon fiber (TCF) with 1% concentration of epoxy sizing (an emerging material for nonaerospace applications with 450 K filament tows) was used as a reinforcement to investigate the structure–property relationship at the interface. Atomic force microscopy results showed 39% higher surface roughness for S-TPU than for H-TPU. X-ray photoelectron spectroscopy results revealed a 550% increase in C=O content, which can provide multiple hydrogen bonding networks in H-TPU, and these C=O bonds can produce a strong chemical bond at the fiber–matrix interface. Additionally, dynamic mechanical analysis and differential scanning calorimetry results confirmed the presence of hydrogen bonding that enhances the cross-linked density by 232% in H-TPU compared to S-TPU. The improved mechanical properties of H-TPU composites, such as flexural, impact and tensile by 30, 50, and 130% compared to S-TPU composites, prove that the crystallinity and hydrogen bonding significantly increase the load bearing capacity due to the strong interface. The mechanical properties of TCF–TPU composites validate the formation of chemical bonds through a nucleophilic addition reaction at the interface and improve the bond strength of the composites. Thus, tailoring the polyurethane structure broadens the performance of segmented TPU in conjunction with TCF reinforcement, which has implications for cost-effective, high-strength composites.

36 MATERIALS SCIENCE↗

Even hard-sphere colloidal suspensions display Fickian yet non-Gaussian diffusion

In this study, we scrutinize three decades of probability density displacement distribution in a simple colloidal suspension with hard-sphere interactions. In this index-matched and density-matched solvent, fluorescent tracer nanoparticles diffuse among matrix particles that are eight times larger, at concentrations from dilute to concentrated, over times up to when the tracer diffuses a few times its size. Displacement distributions of tracers, Gaussian in pure solvent, broaden systematically with increasing obstacle density. The onset of non-Gaussian dynamics is seen in even modestly dilute suspensions, which traditionally would be assumed to follow classic Gaussian expectation. The findings underscore, in agreement with recent studies of more esoteric soft matter systems, the prevalence of non-Gaussian yet Fickian diffusion.

36 MATERIALS SCIENCE↗

Tracking oxygen vacancy migration in memristor devices using operando hard X-ray photoelectron spectroscopy

Fabrication of ultrathin (sub-2 nm) oxide semiconductor memristors poses the fundamental challenge of achieving oxide growth with atomic precision in terms of electronic structure and defect formation. Recently, ultrathin memristors consisting of bilayers of mixed Al 2 O 3 and MgO atomic layers were fabricated using an in vacuo atomic layer deposition process. This approach offers a unique platform for precise atomic control of oxygen vacancies in the device in which the vacancies are introduced by placing MgO atomic layers between pristine Al 2 O 3 layers. In this work, we present a systematic operando Hard X-ray PhotoElectron Spectroscopy (HAXPES) study of the switching of such memristors, combined with complementary current-voltage and capacitance-voltage (C-V) measurements. We used a memristor stack of Al 2 O 3 /MgO atomic layers, with the MgO-containing oxide deposited on the bottom Al metal electrode and a pure Al 2 O 3 layer below the top Pd electrode. HAXPES analysis shows a substantial change in the chemical shift of the Aluminum oxide when switching between the ”OFF” and ”ON” states indicative of a redistribution of oxygen vacancies in the device active layer. Interestingly, subsequent switching to the OFF state shows hysteretic behavior indicating the retention of some oxygen vacancies in the top Al 2 O 3 layer. This vacancy retention can be correlated with the stochastic behavior of the switching voltage observed in these devices. C–V measurements show a clear frequency-dependent response in the OFF state, consistent with enhanced polarization and vacancy trapping at low frequencies.

47 OTHER INSTRUMENTATION↗