Search NASA⌕ Search

SEARCH · Search NASA

Results for “improved microstructures and properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Utilization of deep eutectic solvent as a degumming protocol for Apocynum venetum bast

Deep eutectic solvent (DES) pretreatment coupled with alkaline degumming on Apocynum venetum bast was studied for developing an eco-friendly and effective degumming method. Here, a 1:2 mixture of choline chloride and urea was used in a microwave-assisted DES pretreatment optimized to 60 min and 110 °C. The impact of the deep eutectic solvent pretreatment on the properties of produced semi-degummed and refined dry fibers were assessed by examining the fiber chemical composition, surface microstructure, cellulose crystallinity, degree of polymerization, and fiber thermal properties. The combined DES and alkaline degumming treatment effectively removed the gummy matter including hemicellulose and lignin from the A. venetum bast, providing a smooth and clean fiber surface. This combined DES and alkaline degumming treatment also shows the ability to extract amorphous cellulose, leading to an increase of fiber crystallinity and a decrease of the average cellulose molecular weight. The thermal stability of the fibers was improved significantly after the degumming treatment. The refined dry fibers produced by this combined DES-alkaline treatment exhibited comparable chemical and physical properties (e.g. residual gum content, fiber length, fiber fineness, breaking tenacity) compared with traditionally alkali degumming method. These results revealed that DES is a practical and feasible pretreatment protocol for A. venetum bast degumming.

59 BASIC BIOLOGICAL SCIENCES↗

A Comparative Study on Formability of the Third-Generation Automotive Medium-Mn Steel and 22MnB5 Steel

Third-generation advanced automotive medium-Mn steel, which can replace 22MnB5 steel, was newly developed to improve the lightweight and crashworthiness of automobile. Studies on the formability and simulation method of medium-Mn steel have just been initiated. In this study, finite element simulation models of square-cup deep drawing were established based on various material property experiments and validated by experiments. The effects of blank holder force (BHF), fillet radii of tools (die and punch) on the maximum drawing depth (MDD), thickness distribution of the formed products, and the microstructure before and after forming were investigated and compared with those on 22MnB5 steel. Results show that the MDD of the two steels decreased with increased BHF but increased with the fillet radius of punch; however, the fillet radius of die showed no significant effect on the MDD for both steels. Compared with hot-formed 22MnB5 steel, the martensitic transformation of the hot-formed medium-Mn steel is rarely influenced by the process parameters; thus, it holds the complete, fine-grained, and uniform martensitic microstructure. Moreover, the medium-Mn has better formability, lower initial blank temperature, and smaller impact of BHF and fillet radius of tools on the hot-formed product. Thus, a theoretical basis for the replacement of 22MnB5 steel by medium-Mn steel in hot forming process is provided.

36 MATERIALS SCIENCE↗

Effects of rare earth ionic doping on microstructures and electrical properties of CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

Graphical abstract: The dielectric constant decreases monotonically with reduced RE doping ion radius and is more frequency independent compared with that of pure CCTO sample. - Highlights: • The mean grain sizes decrease monotonically with reduced RE doping ionic radius. • Doping gives rise to the monotonic decrease of ϵ{sub r} with reduced RE ionic radius. • The nonlinear coefficient and breakdown field increase with RE ionic doping. • α of all the samples is associated with the potential barrier width rather than Φ{sub b}. - Abstract: Ca{sub 1–x}R{sub x}Cu{sub 3}Ti{sub 4}O{sub 12}(R = La, Nd, Eu, Gd, Er; x = 0 and 0.005) ceramics were prepared by the conventional solid-state method. The influences of rare earth (RE) ion doping on the microstructure, dielectric and electrical properties of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) ceramics were investigated systematically. Single-phase formation is confirmed by XRD analyses. The mean grain size decreases monotonically with reduced RE ion radius. The EDS results reveal that RE ionic doping reduces Cu-rich phase segregation at the grain boundaries (GBs). Doping gives rise to the monotonic decrease of dielectric constant with reduced RE ionic radius but significantly improves stability with frequency. The lower dielectric loss of doped samples is obtained due to the increase of GB resistance. In addition, the nonlinear coefficient and breakdown field increase with RE ionic doping. Both the fine grains and the enhancement of potential barrier at GBs are responsible for the improvement of the nonlinear current–voltage properties in doped CCTO samples.

36 MATERIALS SCIENCE↗

Preliminary Conceptual Design of a Thick Concrete Nondestructive Evaluation Specimen

Many important safety structures in a nuclear power plant (NPP) are constructed using concrete. The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of NPPs beyond 60 years. In order to evaluate the current status of NPP structures, concrete inspection techniques must be developed and tested. Since in-service containment structures do not allow for destructive measures necessary to validate the accuracy of these inspection techniques, comparative testing of the various nondestructive evaluation (NDE) concrete measurement techniques will require concrete specimens with known material properties, voids, internal microstructure flaws, and reinforcement locations. This report examines the need and availability of large concrete specimens to allow comparative testing of various NDE techniques, and the structural characteristics necessary for the specimens to serve as relevant representations of actual concrete structures in commercial NPPs.

concrete NDE↗

Integrating Experiments, Simulations, and Artificial Intelligence to Accelerate the Discovery of High-Performance Green Composites

The imperative for incorporating greener materials into the aerospace industry necessitates addressing significant challenges associated with the microstructural variability exhibited by recycled and sustainable feedstocks. In this study, we propose an integrated methodology that combines experimental investigations, finite element analysis, and artificial intelligence to develop sustainable composites with consistent properties. Our approach utilizes a pipeline comprising an automated mechanical tester, a finite element method simulator, and a convolutional neural network predictor to identify and optimize fabrication parameters for achieving desired mechanical characteristics in composites. By employing a nested-loop pipeline, our methodology improves sample efficiency, accuracy, and effectively bridges the gap between simulations and real-world performance. This unique methodology offers a promising avenue for facilitating the adoption of aerospace-appropriate green composites.

Athanasiou, Christos↗

Enhancement in hard magnetic properties of (Nd, Pr)–Fe–B melt-spun ribbons

The coercivity of RE 2 Fe 14 B-type permanent magnets is strongly influenced by the microstructural features such as grain boundary (GB) phases as well as grain sizes. Here, we have combined micromagnetic simulations and experiments to elucidate the role of excess RE (Nd/Pr) in determining the resulting hard magnetic properties of Nd–Pr–Fe–B melt-spun ribbons. The intrinsic coercivity (H c ) at room temperature significantly enhanced from 9.7 kOe to 15.3 kOe with the increase in the Nd/Pr content. Furthermore, the effect of non-magnetic grain refining refractory carbide (TiC) on both the microstructure and magnetic hardening was studied. The addition of TiC showed a very high coercivity H c of up to 19.0 kOe at room temperature. Micromagnetic simulation indicates that the coercivity enhancement is mainly due to the reduction of inter-grain magnetic interaction, which is due to the RE-rich nonmagnetic grain boundary (GB) phase and/or TiC distributed at the GB. This work provides useful information on the roles of non-magnetic grain boundary phases for improving the coercivity of Nd–Pr–Fe–B magnets. Combined with experimental and modeling results, we have discussed the mechanism responsible for the enhancements in coercivity and the suitability of the alloys for high-performance permanent magnet development.

36 MATERIALS SCIENCE↗

Multiscale Modeling of Thermoplastics Using Atomistic-informed Micromechanics

A multiscale model was developed for predicting the thermoelastic behavior of semi-crystalline thermoplastic materials for composite aerospace applications. At the highest scale containing the semi-crystalline spherulite in an amorphous matrix, the generalized method of cells, or high fidelity method of cells, was used to perform the homogenization calculations to obtain the effective properties. Models were developed assuming a cubic, or spherical shape, for the spherulite to understand if the morphology of the spherulite affects the effective thermoelastic properties. The generalized method of cells was used to model at the repeating unit cells at the subscales of the microstructure including the lamellae stacks and granular crystal blocks. The scales are integrated using the multiscale micromechanics method in the NASA Multiscale Analysis Tool. Data from molecular dynamics simulations were used as inputs for the amorphous and crystalline constituents. Convergence studies were performed to determine the best level of discretization for the repeating unit cell at the highest scale. Effective Young’s modulus, shear modulus, Poisson’s ratio, coefficient of thermal expansion, and thermal conductivity were predicted for polyether ether ketone and polyether ketone ketone, and very good agreement between the model utilizing the cubic spherulite and the experimental data, where available, was observed for polyether ketone ketone. Normalization of the data for the bulk polyether ketone ketone, against amorphous data, improved the predictions as compared to experimental data. Overall, the high fidelity method of cells predicted a stiffer response then the generalized method of cells as the crystallinity was increased. The shape of the spherulite had a minimal effect on the predicted bulk properties of the polymers.

thermoplastics↗

Influence of Ba Substitutions on Microstructure and Magnetic Properties of La–Ca–Co System Permanent Ferrite

La{sub 0.6}Ca{sub 0.4−x}Ba{sub x}O⋅n/2(Fe{sub 1−y}Co{sub y}){sub 2}O{sub 3}(x = 0, 0.05, 0.1, 0.15 and 0.2) permanent ferrite materials were prepared by ceramic technique. The topography and the structure were characterized by scanning electron microscopy (SEM) and x-ray diffraction (XRD), respectively. The magnetic properties were measured using vibrating sample magnetometer (VSM) and digital magnetometer. Single M-phase and flake-like grains were obtained for samples without Ba substitution(x = 0), and the magnetic properties of the pre-sintering La–Ca–Co ferrite were as follows: B{sub r} = 440 mT, H{sub cb} = 296 kA/m, H{sub cj} = 426 kA/m, (BH){sub max} = 36.6 kJ/m{sup 3} and H{sub k}/H{sub cj} = 0.83. When Ca was substituted by Ba, pre-sintered powder presents single M-phase structure and close three-dimensional size of grains, resulting in an improved rectangle ratio of sintered magnet. The rectangle ratio of sintered magnet reaches a maximum of 0.93 when x = 0.1. By optimizing process parameters, M-type La–Ca–Ba–Co sintered magnet was prepared with B{sub r} = 445 mT, H{sub cb} = 337 kA/m, H{sub cj} = 420 kA/m, (BH){sub max} = 38.6 kJ/m{sup 3} and H{sub k}/H{sub cj} = 0.95.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-Fidelity Microstructural Characterization and Performance Modeling of Aluminized Composite Propellant

Image processing and stereological techniques were used to characterize the heterogeneity of composite propellant and inform a predictive burn rate model. Composite propellant samples made up of ammonium perchlorate (AP), hydroxyl-terminated polybutadiene (HTPB), and aluminum (Al) were faced with an ion mill and imaged with a scanning electron microscope (SEM) and x-ray tomography (micro-CT). Properties of both the bulk and individual components of the composite propellant were determined from a variety of image processing tools. An algebraic model, based on the improved Beckstead-Derr-Price model developed by Cohen and Strand, was used to predict the steady-state burning of the aluminized composite propellant. In the presented model the presence of aluminum particles within the propellant was introduced. The thermal effects of aluminum particles are accounted for at the solid-gas propellant surface interface and aluminum combustion is considered in the gas phase using a single global reaction. In conclusion, properties derived from image processing were used directly as model inputs, leading to a sample-specific predictive combustion model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3Y-TZP Toughened and Oxidation-resistant U 3 Si 2 Composites for Accident Tolerant Fuels

In this work, we report an innovative approach synergizing multiple effects of microstructure control, oxide protection and phase transformation-induced mechanically toughening to develop advanced U 3 Si 2 fuels with state-of-the-art materials properties. 3Y-TZP (3 mol% yttria doped stabilized tetragonal zirconia) additives are incorporated and uniformly distributed into the SPS-densified U 3 Si 2 fuel matrix, enhancing materials fracture toughness up to 4.04 MPa m 1/2 . The 3Y-TZP incorporated U 3 Si 2 composite pellets show significantly improved onset temperature of oxidation above 560 °C, which can be further improved to 617 °C with 3 vol% addition by post-sintering thermal annealing. We report the development of mechanically tough and oxidation-resistant U 3 Si 2 with minimal additive represents a major step forward towards realizing the potential of high density U 3 Si 2 as the leading fuel concept to increase accidence tolerance of nuclear energy systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High Temperature Oxidation Behavior of HVOF-sprayed Coatings for Use in Thixoextrusion Processes

The dies used for the thixoextrusion of steels have to be capable of withstanding complex thermal and mechanical loads, while giving a sufficient wear resistance against abrasion and adhesion at very high temperatures. In order to improve the wear resistance and reduce the heating of the extrusion die it can be protected with a hard cermet coating. The purpose of this work is to study the high-temperature performance of CrC-CoNiCrAlY coating and explore the potential application of this coating to improve dies used in thixoextrusion processes. A two-layer 75CrC-25CoNiCrAlY coating with a CoNiCrAlY bond-coating was fabricated by the HVOF thermal spray process on a steel substrate. Coatings were heat-treated at a range of temperatures between 900 deg. C and 1100 deg. C. The microstructural characterization of the coatings before and after heat treatment was conducted by scanning electron microscopy (SEM) and an X-ray diffractometer (XRD). The mechanical properties of coatings were determined as a function of the temperature of heat treatment. The bond coat effect on the thermal shock resistance of CrC-CoNiCrAlY coating was analyzed.

36 MATERIALS SCIENCE↗

Effect of sintering on electrical properties of yttrium doped Li-based NASICON compounds

Electrical properties of Lithium based Li{sub 1.3}Al{sub 0.3-x}Y{sub x}Ti{sub 1.7}(PO{sub 4}){sub 3} (LAYTP) system was prepared using solid state reaction route. The samples were subjected to differing duration of sintering. X-ray diffraction was used to investigate the microstructure while density measurement was performed to determine the effect of sintering on the density of the prepared samples. Electrical properties of the material were studied using impedance spectroscopy, in frequency range 20 MHz to 1 Hz and in temperature range 303 K to 423 K. It was found that sample with least amount of yttrium and which was sintered for least duration had superior conductivity over other samples. It was also found that grain boundary conductivity improved marginally for sample with higher proportion of yttrium heat treated for longer duration.

36 MATERIALS SCIENCE↗

Imaging in 3D under pressure: a decade of high-pressure X-ray microtomography development at GSECARS

The high-pressure X-ray microtomography (HPXMT) apparatus has been operating at the GeoSoilEnviroCARS (GSECARS) bending magnet beamline at the Advanced Photon Source since 2005. By combining the powerful synchrotron X-ray source and fast switching between white (for X-ray diffraction) and monochromatic (for absorption imaging) modes, this technique provides the high-pressure community with a unique opportunity to image the three-dimensional volume, texture, and microstructure of materials under high pressure and temperature. The ability to shear the sample with unlimited strain by twisting the two opposed anvils in the apparatus allows shear deformation studies under extreme pressure and temperature to be performed. HPXMT is a powerful tool for studying the physical properties of both crystalline and non-crystalline materials under high pressure and high temperature. Over the past 10 years, continuous effort has been put into technical development, modifications to improve the overall performance, and additional probing techniques to meet users’ needs. Here in this paper, we present an up-to-date report on the HPXMT system, a brief review of some of its many exciting scientific applications, and a discussion of future developments.

47 OTHER INSTRUMENTATION↗

Solid state consolidation nanocrystalline copper-tungsten using cold spray

It is well known that nanostructured metals can exhibit significantly improved properties compared to metals with conventional grain size. Unfortunately, nanocrystalline metals typically are not thermodynamically stable and exhibit rapid grain growth at moderate temperatures. This severely limits their processing and use, making them impractical for most engineering applications. Recent work has shown that a number of thermodynamically stable nanocrystalline metal alloys exist. These alloys have been prepared as powders using severe plastic deformation (e.g. ball milling) processes. Consolidation of these powders without compromise of their nanocrystalline microstructure is a critical step to enabling their use as engineering materials. We demonstrate solid-state consolidation of ball milled copper-tantalum nanocrystalline metal powder using cold spray. Unfortunately, the nanocrystalline copper-tantalum powder that was consolidated did not contain the thermodynamically stable copper-tantalum nanostructure. Nevertheless, this does this demonstrates a pathway to preparation of bulk thermodynamically stable nanocrystalline copper-tantalum. Furthermore, it demonstrates a pathway to additive manufacturing (3D printing) of nanocrystalline copper-tantalum. Additive manufacturing of thermodynamically stable nanocrystalline metals is attractive because it enables maximum flexibility and efficiency in the use of these unique materials.

36 MATERIALS SCIENCE↗

Complete Status Report Documenting the Processing, Microstructure and High-Temperature Mechanical Properties of the Nanostructured Ferritic Alloy OFRAC

This report provides a summary of the new nanostructured ferritic alloy, OFRAC (Oak Ridge Fast Reactor Advanced Fuel Cladding), that was developed for the advanced sodium fast reactor fuel cladding and core internals. The composition of OFRAC, which is Fe-12Cr-1Mo-03.Ti-0.3Nb + 0.3Y2O3 (wt. %), was chosen to achieve high temperature strength as well as high temperature creep performance and swelling resistance requirements that past structural materials such as austenitic stainless steels and ferritic/martensitic steels, i.e. HT-9, are not suitable as SFR cladding materials. The mechanical alloying procedures were described for producing OFRAC and the detailed characterization studies revealed uniformly distributed, high concentration of Y-Ti-O enriched oxide particles, or nanoclusters. The Nb addition that was intended to sequester interstitial C and N that are commonly introduced as contamination during ball milling of powder was found to be very effective in forming coarse size Nb carbonitrides along with excess Ti that removes these interstitial elements from the bcc-Fe matrix of OFRAC. The tensile tests on the OFRAC in the extruded condition showed excellent balance in strength and ductility from room temperature to 800°C. Both the microstructure and tensile properties were not significantly degraded after annealing the extruded OFRAC samples for 8 h at 1050°C and 1150°C. The latter temperature is ~76% of the melting point of OFRAC. These results demonstrated the stability of the microstructure and tensile properties to extremely high temperatures. The thermal creep resistance at elevated temperatures and stresses was investigated using strain rate jump testing. The results showed that OFRAC possessed high stress exponents at high stresses and temperatures of 550°C, 600°C, 700ºC and 800°C. This thermal dependence of minimum creep rate indicates that OFRAC will show quite low creep rates at higher temperatures and stresses compared to HT-9 and stainless steels. These significant improvements indicate that the NFA OFRAC alloy is a compelling and viable choice for sodium fast reactor fuel cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure and Magnetic Properties of Bulk Nanocrystalline MnAl

MnAl is a promising rare-earth free permanent magnet for technological use. We have examined the effects of consolidation by back-pressure, assisted equal channel angular extrusion processing on mechanically-milled, gas-atomized Mn-46% at. Al powder. X-ray diffraction showed both that the extruded rod consisted mostly of metastable tau phase, with some of the equilibrium gamma(2) and beta phases, and that it largely retained the as-milled nanostructure. Magnetic measurements show a coercivity of <= 4.4 kOe and a magnetization at 10 kOe of <= 40 emu/g. In addition, extrusions exhibit greater than 95% of the theoretical density. This study opens a new window in the area of bulk MnAl magnets with improved magnetic properties for technological use.

Chaturvedi, A↗

Effect of Ce{sup 3+} Ion on Structural and Hyperfine Interaction Studies of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} Ferrites: Useful for Permanent Magnet Applications

Nanoparticles of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} (where x = 0.0, 0.01, 0.015 and 0.02) ferrites are prepared by the modified solution combustion method using a mixture of fuels and are characterized to understand their structural, microstructural and magnetic properties. The X-ray diffraction is used to confirm the formation of a single-phase cubic spinel structure. The average crystallite sizes are calculated using the Scherrer formula and are found to be less than 50 nm. The microstructural features are obtained by the scanning electron microscopy, and the compositional analysis is done by using the energy-dispersive spectroscopy. The transmission electron microscopy (TEM) investigations show that the synthesized ferrites are made up of very fine spherical nanoparticles. The influence of a rare-earth element (Ce{sup 3+}) on the magnetic properties of the samples was studied using the Mössbauer spectroscopy. The Mössbauer spectroscopy reveals the formation of broadened Zeeman lines and quadrupole-split lines and the presence of the Fe{sup 3+} charge state at B sites in the samples. The quadrupole splitting shows that the orientation of the magnetic hyperfine field with respect to the principle axes of the electric field gradient was random. The magnetic hyperfine field values indicate that the A sites have more A-O-B superexchange interactions than the B sites. The coexistence of magnetic sextet and a doublet component on the room-temperature spectra suggests superparamagnetic properties of the nanoparticles. The low-temperature (15 K) Mössbauer spectroscopy explores the paramagnetic relaxation in the nanoparticles. The area under the sextet refers to Fe{sup 3+} concentrations in the tetrahedral and octahedral sites of the ferrite. This study confirms that the Ce{sup 3+} substitution of Fe{sup 3+} only for octahedron sites causes the decrease in Fe-O-Fe arrangement. The effect of Ce{sup 3+} doping on the magnetic properties of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} is examined from the vibrating sample magnetometry (VSM) spectra. Saturation magnetization values are decreased initially and then increased, as result of Ce{sup 3+} doping. This can be explained by Neel’s two-sub-lattice model. Further, the value of coercivity is found to be increasing with increasing Ce{sup 3+} concentration. The obtained results of M-H loop with improved coercivity (from 851 to 1039 Oe) by Ce{sup 3+} doping of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} demonstrate the usefulness for permanent magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗