Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Emergent interface vibrational structure of oxide superlattices

As the length scales of materials decrease, the heterogeneities associated with interfaces become almost as important as the surrounding materials. This has led to extensive studies of emergent electronic and magnetic interface properties in superlattices. However, the interfacial vibrations that affect the phonon-mediated properties, such as thermal conductivity, are measured using macroscopic techniques that lack spatial resolution. Although it is accepted that intrinsic phonons change near boundaries, the physical mechanisms and length scales through which interfacial effects influence materials remain unclear. Here we demonstrate the localized vibrational response of interfaces in strontium titanate–calcium titanate superlattices by combining advanced scanning transmission electron microscopy imaging and spectroscopy, density functional theory calculations and ultrafast optical spectroscopy. Structurally diffuse interfaces that bridge the bounding materials are observed and this local structure creates phonon modes that determine the global response of the superlattice once the spacing of the interfaces approaches the phonon spatial extent. Our results provide direct visualization of the progression of the local atomic structure and interface vibrations as they come to determine the vibrational response of an entire superlattice. Direct observation of such local atomic and vibrational phenomena demonstrates that their spatial extent needs to be quantified to understand macroscopic behaviour. Tailoring interfaces, and knowing their local vibrational response, provides a means of pursuing designer solids with emergent infrared and thermal responses.

36 MATERIALS SCIENCE↗

ExaWorks: Workflows for Exascale

Exascale computers will offer transformative capabilities to combine data-driven and learning-based approaches with traditional simulation applications to accelerate scientific discovery and insight. These software combinations and integrations, however, are difficult to achieve due to challenges of coordination and deployment of heterogeneous software components on diverse and massive platforms. We present the ExaWorks project, which can address many of these challenges: ExaWorks is leading a co-design process to create a workflow Software Development Toolkit (SDK) consisting of a wide range of workflow management tools that can be composed and interoperate through common interfaces. We describe the initial set of tools and interfaces supported by the SDK, efforts to make them easier to apply to complex science challenges, and examples of their application to exemplar cases. Furthermore, we discuss how our project is working with the workflows community, large computing facilities as well as HPC platform vendors to sustainably address the requirements of workflows at the exascale.

97 MATHEMATICS AND COMPUTING↗

Interface Control of Ferroelectricity in an SrRuO 3 /BaTiO 3 /SrRuO 3 Capacitor and its Critical Thickness

Here, the atomic-scale synthesis of artificial oxide heterostructures offers new opportunities to create novel states that do not occur in nature. The main challenge related to synthesizing these structures is obtaining atomically sharp interfaces with designed termination sequences. In this study, it is demonstrated that the oxygen pressure (P O 2 ) during growth plays an important role in controlling the interfacial terminations of SrRuO 3 /BaTiO 3 /SrRuO 3 (SRO/BTO/SRO) ferroelectric (FE) capacitors. The SRO/BTO/SRO heterostructures are grown by a pulsed laser deposition method. The top SRO/BTO interface, grown at high P O 2 (around 150 mTorr), usually exhibits a mixture of RuO 2 -BaO and SrO-TiO 2 terminations. By reducing P O 2 , the authors obtain atomically sharp SRO/BTO top interfaces with uniform SrO-TiO 2 termination. Using capacitor devices with symmetric and uniform interfacial termination, it is demonstrated for the first time that the FE critical thickness can reach the theoretical limit of 3.5 unit cells.

36 MATERIALS SCIENCE↗

Final Technical Report -- Bridging the PSI Knowledge Gap: A Multiscale Approach

The Plasma Surface Interactions (PSI) Science Center formed by the grant undertook a multidisciplinary set of studies on the complex interface between the plasma and solid states of matter. The strategy of the center was to combine and integrate the experimental, diagnostic and modeling toolkits from multiple institutions towards specific PSI problems. In this way the Center could tackle integrated science issues which were not addressable by single institutions, as well as evolve the underlying science of the PSI in a more general way than just for fusion applications. The overall strategy proved very successful. The research result and highlights of the MIT portion of the Center are primarily described. A particular highlight is the study of tungsten nano-tendril growth in the presence of helium plasmas. The Center research provided valuable new insights to the mechanisms controlling the nano-tendrils by developing coupled modeling and in situ diagnostic methods which could be directly compared. For example, the role of helium accumulation in tungsten distortion in the surface was followed with unique in situ helium concentration diagnostics developed. These depth-profiled, time-resolved helium concentration measurements continue to challenge the numerical models of nano-tendrils. The Center team also combined its expertise on tungsten nano-tendrils to demonstrate for the first time the growth of the tendrils in a fusion environment on the Alcator C-Mod fusion experiment, thus having significant impact on the broader fusion research effort. A new form of isolated nano-tendril “columns” were identified which are now being used to understand the underlying mechanisms controlling the tendril growth. The Center also advanced PSI science on a broader front with a particular emphasis on developing a wide range of in situ PSI diagnostic tools at the DIONISOS facility at MIT. For example the strong suppression of sputtering by the certain combination of light-species plasmas and metals was experimentally studied with independent measurement methods across the Center. This surprising result challenges the universal use of the binary-collision approximation in sputtering predictions and continues to be the subject of study. In order to address this issue MIT developed a new in situ erosion measurement technique based on ion beam analysis which can be used at elevated material temperatures. This exciting new technique is now being used to study material erosion in high performance plasma thrusters for space exploration and is being adopted to fusion experimental devices. This is an indicator of the positive synergies that arise from such a Center, with the research having impact beyond the initial area of study. The Center also served successfully as an organizing force for communication to the science community. The MIT members of the Center provided many high-profile overview presentations at prestigious international conferences and national workshops. The research resulted in three student theses and 24 peer-reviewed publications. PSI research continues to be identified as a critical area for fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heterostructural Rocksalt-Wurtzite Interfaces

Data and code accompanying the following publication: Sharad Mahatara and Stephan Lany, "Heterostructural interface engineering for ultrawide gap nitrides from first principles: TaC/AlN and TaC/GaN rocksalt-wurtzite interfaces," Physical Review Applied 22, 054044 (2024). https://doi.org/10.1103/PhysRevApplied.22.054044

36 MATERIALS SCIENCE↗

Increasing Discovery and Usability of Earth Science Satellite Data with My NASA Data

For 20 years, the My NASA Data project at NASA Langley Research Center has developed innovative approaches to increase the use of NASA’s satellite data by learners. My NASA Data offers a variety of authentic Earth Science datasets and a data visualization tool, eliminating the need for educators and/or learners to obtain specialized knowledge of GIS data formats and software to access and use authentic Earth Science data. While there is no shortage of available data, as federal government agencies such as NASA house petabytes of freely accessible Earth Science datasets, much of the data are only available for download and visualization in specialized formats and software, limiting their accessibility to educators and learners, especially those in primary and secondary school. Using the Google Earth Engine platform, the My NASA Data team has recently reinvented their data visualization tool, called the Earth System Data Explorer (ESDE). The ESDE gives users the capability to explore over 60 Earth Science satellite datasets in a multitude of formats such as maps, graphs, and data table Its new and improved user interface design was developed based on the preferences of educators, whom the My NASA Data project has over 20 years’ experience working with. Earth Science and GIS Subject Matter Experts (SMEs) structured the data in a professional and scientific manner. During Fiscal Year 2023, the My NASA Data website received over 1 million digital engagements, with over one-third being visitors to the data visualization tool. These metrics highlight the interest in a visualization tool that is simple and free to use with reliable and trusted datasets. The ESDE empowers users to readily relate and analyze NASA Earth Science data within their area of interest. The team used a user-centered design (UCD) framework to receive and incorporate feedback into the application’s design. Core requested features include the ability to create time series graphs, comparative analysis of maps, and download the data as CSV file. Responses indicate that advances in data visualization tools such as the ESDE make authentic Earth Science data more accessible. This presentation will cover how the My NASA Data project develops tools to enhance data discovery and accessibility, as well as how SME and user suggestions are incorporated.

Desiray Wilson↗

Interfacial Charge Engineering in Ferroelectric-Controlled Mott Transistors

Heteroepitaxial coupling at complex oxide interfaces introduces a powerful tool for engineering the charge degree of freedom in strongly correlated materials, which can be utilized to achieve tailored functionalities that are inaccessible in the bulk form. In this work, the charge-transfer effect between two strongly correlated oxides, Sm 0.5 Nd 0.5 NiO 3 (SNNO) and La 0.67 Sr 0.33 MnO 3 (LSMO), is exploited to realize a giant enhancement of the ferroelectric field effect in a prototype Mott field-effect transistor. By switching the polarization field of a ferroelectric Pb(Zr,Ti)O 3 (PZT) gate, nonvolatile resistance modulation in the Mott transistors with single-layer SNNO and bilayer SNNO/LSMO channels is induced. For the same channel thickness, the bilayer channels exhibit up to two orders of magnitude higher resistance-switching ratio at 300 K, which is attributed to the intricate interplay between the charge screening at the PZT/SNNO interface and the charge transfer at the SNNO/LSMO interface. X-ray absorption spectroscopy and X-ray photoelectron spectroscopy studies of SNNO/LSMO heterostructures reveal about 0.1 electron per 2D unit cell transferred between the interfacial Mn and Ni layers, which is corroborated by first-principles density functional theory calculations. The study points to an effective strategy to design functional complex oxide interfaces for developing high-performance nanoelectronic and spintronic applications.

36 MATERIALS SCIENCE↗

Development and characterisations of WC–12Co microwave clad

In the present work, WC–12Co based cermet clad was developed on AISI 304 stainless steel using microwave hybrid heating technique. The experimental trials were carried out in a 1.4 kW industrial multimode microwave applicator. The paper explains the major events occurring during microwave irradiation and formation of clad. The developed clads were subsequently characterised through field emission scanning electron microscopy equipped with energy dispersive X-ray spectroscopy, X-ray diffraction, assessment of porosity and microhardness. The WC–12Co clads developed with an approximate thickness of 1 mm, illustrated excellent metallurgical bonding with substrate. The microstructure of the WC–12Co clad mainly consists of skeleton structured carbides embedded in tough metallic phase. The phase analysis of the developed clads indicate the presence of various stable and complex carbides like Co{sub 6}W{sub 6}C, Co{sub 3}W{sub 3}C and Fe{sub 6}W{sub 6}C. The uniform distribution of such carbides with skeleton-like morphology in the microstructure is indicative of high hardness of the clad. The developed clads were free from visible interfacial cracking and the clad porosity was found in the order of approximately 0.98%. The average microhardness of the WC–12Co microwave clads was observed to be 1135 ± 88 HV. - Highlights: • Microwave cladding of WC–12Co on AISI 304 stainless steel is carried out. • Skeleton-like structures of W–Co based carbides are embedded in metallic matrix. • Clad–substrate interface is free from un-melted and un-dissolved carbide particles. • Hardness of clad (1135 ± 88 HV) is 3.5 times that of the substrate (325 ± 49 HV)

36 MATERIALS SCIENCE↗

The Diffusion Mechanism of Ge During Oxidation of Si/SiGe Nanofins

A recently discovered, enhanced Ge diffusion mechanism along the oxidizing interface of Si/SiGe nanostructures has enabled the formation of single-crystal Si nanowires and quantum dots embedded in a defect-free, single-crystal SiGe matrix. Here, we report oxidation studies of Si/SiGe nanofins aimed at gaining a better understanding of this novel diffusion mechanism. Here, a superlattice of alternating Si/Si 0.7 Ge 0.3 layers was grown and patterned into fins. After oxidation of the fins, the rate of Ge diffusion down the Si/SiO 2 interface was measured through the analysis of HAADF-STEM images. The activation energy for the diffusion of Ge down the sidewall was found to be 1.1 eV, which is less than one-quarter of the activation energy previously reported for Ge diffusion in bulk Si. Through a combination of experiments and DFT calculations, we propose that the redistribution of Ge occurs by diffusion along the Si/SiO 2 interface followed by a reintroduction into substitutional positions in the crystalline Si.

36 MATERIALS SCIENCE↗

Effect of MgO spacer and annealing on interface and magnetic properties of ion beam sputtered NiFe/Mg/MgO/CoFe layer structures

The effect of variation in the thickness of ion assisted ion beam sputtered MgO spacer layer deposited at oxygen ion assisted energy of 50 eV on the extent of magnetic coupling of NiFe and CoFe layers in Si/NiFe(10 nm)/Mg(1 nm)/MgO(2,4,6 nm)/CoFe(10 nm) sandwich structure is investigated. At MgO spacer layer thickness of 4 nm, the separate reversal of magnetizations of the two ferromagnetic layers is observed in the hystresis loop recorded along easy direction. This results in a 3.5 Oe wide plateau like region during magnetization reversal, which became 4.5 Oe at 6 nm thin MgO. At 2 nm thin MgO, the absence of plateau during magnetization reversal region revealed ferromagnetic coupling between the two ferromagnetic layers, which is understood to arise due to the growth of very thin and low density (1.22 gm/cc) MgO spacer layer, indicating the presence of pinholes as revealed by x-ray reflectometry. After vaccum annealing (200 Degree-Sign C/1 h), the plateau region for 4 and 6 nm thin MgO case decreased to 1.5 Oe and 2.0 Oe, respectively, due to enhanced interface roughness/mixing. In addition, an enhancement of the in-plane magnetic anisotropy is also observed.

36 MATERIALS SCIENCE↗

Growing LaAlO{sub 3}/SrTiO{sub 3} interfaces by sputter deposition

Sputter deposition of oxide materials in a high-pressure oxygen atmosphere is a well-known technique to produce thin films of perovskite oxides in particular. Also interfaces can be fabricated, which we demonstrated recently by growing LaAlO{sub 3} on SrTiO{sub 3} substrates and showing that the interface showed the same high degree of epitaxy and atomic order as is made by pulsed laser deposition. However, the high pressure sputtering of oxides is not trivial and number of parameters are needed to be optimized for epitaxial growth. Here we elaborate on the earlier work to show that only a relatively small parameter window exists with respect to oxygen pressure, growth temperature, radiofrequency power supply and target to substrate distance. In particular the sensitivity to oxygen pressure makes it more difficult to vary the oxygen stoichiometry at the interface, yielding it insulating rather than conducting.

36 MATERIALS SCIENCE↗

Photoluminescence properties of cadmium-selenide quantum dots embedded in a liquid-crystal polymer matrix

The photoluminescence properties of cadmium-selenide (CdSe) quantum dots with an average size of {approx}3 nm, embedded in a liquid-crystal polymer matrix are studied. It was found that an increase in the quantum-dot concentration results in modification of the intrinsic (exciton) photoluminescence spectrum in the range 500-600 nm and a nonmonotonic change in its intensity. Time-resolved measurements show the biexponential decay of the photoluminescence intensity with various ratios of fast and slow components depending on the quantum-dot concentration. In this case, the characteristic lifetimes of exciton photoluminescence are 5-10 and 35-50 ns for the fast and slow components, respectively, which is much shorter than the times for colloidal CdSe quantum dots of the same size. The observed features of the photoluminescence spectra and kinetics are explained by the effects of light reabsorption, energy transfer from quantum dots to the liquid-crystal polymer matrix, and the effect of the electronic states at the CdSe/(liquid crystal) interface.

36 MATERIALS SCIENCE↗

Enhancement of Thermal Conductivity and Mechanical Properties of Cu-Reduced Graphene Oxide Composites by Interface Modification

Copper matrix composites reinforced with reduced graphene oxide (rGO) were fabricated via charge adsorption process, thermal reduction, and hot-press sintering process. We investigated the effect of rGO on the thermal conductivity, electrical conductivity, mechanical properties, and microstructure of the composites. By controlling the reaction process, copper on the rGO surface was oxidized to form Cu{sub 2}O. The presence of Cu{sub 2}O at the interface enhanced interfacial bonding strength and reduced the interfacial thermal resistance, thus improving the thermal conductivity and mechanical properties. This enhancement occurred at low rGO contents. By contrast, excessive amounts led to rGO agglomeration and a degradation of the performance. At the optimum rGO content of 0.6 wt.%, the composites had a 10% increase in thermal conductivity and a 46% increase in yield strength (σ{sub 0.2}), while maintaining high electrical conductivity.

36 MATERIALS SCIENCE↗

Large intrinsic anomalous Hall effect in SrIrO 3 induced by magnetic proximity effect

The anomalous Hall effect (AHE) is an intriguing transport phenomenon occurring typically in ferromagnets as a consequence of broken time reversal symmetry and spin-orbit interaction. It can be caused by two microscopically distinct mechanisms, namely, by skew or side-jump scattering due to chiral features of the disorder scattering, or by an intrinsic contribution directly linked to the topological properties of the Bloch states. Here we show that the AHE can be artificially engineered in materials in which it is originally absent by combining the effects of symmetry breaking, spin orbit interaction and proximity-induced magnetism. In particular, we find a strikingly large AHE that emerges at the interface between a ferromagnetic manganite (La 0.7 Sr 0.3 MnO 3 ) and a semimetallic iridate (SrIrO 3 ). It is intrinsic and originates in the proximity-induced magnetism present in the narrow bands of strong spin-orbit coupling material SrIrO 3 , which yields values of anomalous Hall conductivity and Hall angle as high as those observed in bulk transition-metal ferromagnets. These results demonstrate the interplay between correlated electron physics and topological phenomena at interfaces between 3d ferromagnets and strong spin-orbit coupling 5d oxides and trace an exciting path towards future topological spintronics at oxide interfaces.

36 MATERIALS SCIENCE↗

Composition and automated crystal orientation mapping of rapid solidification products in hypoeutectic Al-4 at.%Cu alloys

Rapid solidification can produce metastable phases and unusual microstructure modifications in multi-component alloys during additive manufacturing or laser beam welding. Composition and phase mapping by transmission electron microscopy have been used in this paper to characterize the morphologically distinct zones developing in hypoeutectic Al-4 at.% Cu alloy after pulsed laser melting for different crystal growth rate regimes. Deviations of the compositions of the alloy phases from equilibrium predictions and unique orientation relationships between the solidification transformation products have been determined. Specifically, for the columnar growth zone at solidification rates of 0.8 m s - 1 < v < v a = 1.8 m s - 1 , two distinct orientation relationships were established between the concomitantly forming non-equilibrium phases, supersaturated α-Al solid solution and the discontinuously distributed α-Al 2 Cu-based θ'-phase, which can be described as {110} θ ∥ {001} α , [001] θ ∥ [110] α and {001} θ ∥ {001} α , [100] θ ∥ [100] α . These orientation relationships permit formation of coherent interphase interfaces with low interfacial free energy. Finally, this endows a kinetic advantage to the thermodynamically less stable θ'-Al 2 Cu phase relative to the more stable equilibrium θ-Al 2 Cu phase during formation of the morphologically modified eutectic of the columnar growth zone grains, since repeated nucleation is required to establish the discontinuous distribution of θ'-Al 2 Cu phase.

36 MATERIALS SCIENCE↗

Engineering the Interface Between Inorganic Materials and Cells

To further optimize cell function in hybrid “living materials”, it would be advantageous to render mammalian cells responsive to novel “orthogonal” cues, i.e. signals they would not ordinarily respond to but that can be engineered to feed into defined intracellular signaling pathways. We recently developed an optogenetic method, based on A. thaliana Cry2, for rapid and reversible protein oligomerization in response to blue light. We also demonstrated the ability to use this method to channel the light input into several defined signaling pathways, work that will enhance communication between inorganic devices and living systems.

36 MATERIALS SCIENCE↗

Effect of a micro-scale dislocation pileup on the atomic-scale multi-variant phase transformation and twinning

In this paper, we perform concurrent atomistic–continuum (CAC) simulations to assess the contribution of the internal stress induced by the microscale dislocation pileup at an atomically structured interface to the atomic-scale phase transformations (PTs), reverse PTs, and twinning. The main novelty of this work is to unify the atomistic description of the interface and the coarse-grained (CG) description of the lagging dislocations away from the interface within one single framework. Our major findings are: (a) the interface dynamically responds to a pileup by forming steps/ledges, the height of which is proportional to the number of dislocations arriving at the interface; (b) the pileup-induced internal stress concentration profile follows neither the classical Eshelby model nor the super-dislocation model alone, but a combination of them; (c) when the pre-sheared sample is compressed, a direct square-to-hexagonal PT occurs ahead of the pileup tip and eventually grows into a wedge shape. The two variants of the hexagonal phases form a twin with respect to each other; (d) upon a further increase of the loading, part of the newly formed hexagonal phase transforms back to the square phase. The square product phase resulting from this reverse PT forms a twin with respect to the initial square phase. All phase boundaries (PBs) and twin boundaries (TBs) are stationary and correspond to zero thermodynamic Eshelby driving forces; and (e) the microscale dislocation pileup-induced internal shear stress and the structural change at the atomic-scale interface reduces the stress required for initiating a PT by a factor of 5.5, comparing with that in the sample containing no dislocations. This work is the first characterization of the behavior of PTs/twinning resulting from the reaction between a microscale dislocation slip and an atomically structured interface. In conclusion, the gained knowledge will advance our understanding of how the multi-phase material behaves in many complex physical processes, such as the synthesis of multi-phase high-entropy alloys or superhard ceramics under high-pressure torsion, deep mantle earthquakes in geophysics, and so on, which all involve dislocation slip, PTs, twinning, and their interactions across from the atomistic to the microscale and beyond.

36 MATERIALS SCIENCE↗

Reduced Water Density in a Poly(ethylene oxide) Brush

A model poly(ethylene oxide) (PEO) brush system, prepared by spreading a poly(ethylene oxide)-poly(n-butyl acrylate) (PEO-PnBA) amphiphilic diblock copolymer onto an air-water interface, was investigated under various grafting density conditions by using the X-ray reflectivity (XR) technique. The overall electron density profiles of the PEO-PnBA monolayer in the direction normal to the air-water interface were determined from the XR data. From this analysis, it was found that inside of the PEO brush, the water density is significantly lower than that of bulk water, in particular, in the region close to the PnBA-water interface. Separate XR measurements with a PnBA homopolymer monolayer confirm that the reduced water density within the PEO-PnBA monolayer is not due to unfavorable contacts between the PnBA surface and water. The above result, therefore, lends support to the notion that PEO chains provide a hydrophobic environment for the surrounding water molecules when they exist as polymer brush chains.

36 MATERIALS SCIENCE↗