Search NASA⌕ Search

SEARCH · Search NASA

Results for “microstructure modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Microstructure evolution during near- T g annealing and its effect on shear banding in model alloys

By performing extensive molecular dynamics simulations, we investigate herein the deformation behavior in A l 90 S m 10 and C u 64.5 Z r 35.5 alloys after elongated isothermal annealing in the vicinity of the glass-transition temperature ( T g ). Different microstructural response to the annealing process was observed: A l 90 S m 10 maintains the glassy structure with improved energetic stability, enhanced short-range order (SRO), and a more pronounced spatial network that extends beyond the first atomic shell, while C u 64.5 Z r 35.5 forms nanocrystalline Laves C u 2 Zr phases. Shear banding occurs in both annealed systems under shear loading. For A l 90 S m 10 , the spatial network formed by the local clusters characterizing the SRO of the system is significantly weakened but remains appreciable in the shear band. In contrast, the crystalline ordering in the C u 64.5 Z r 35.5 is completely destroyed during shear banding. Consequently, while displaying higher yield strength, the annealed C u 64.5 Z r 35.5 sample appears to be less ductile. By carefully examining the effect of microstructures on the structural ordering in the shear band and the consequent mechanical response, our work contributes to a better understanding of the deformation mechanism of amorphous alloys as compared with that in crystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

Instrumented nanoindentation was used in this paper to investigate the hardness, elastic modulus, and creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the indented grain orientation being the variant. The samples indented close to the {111} surfaces exhibited the highest hardness and modulus. However, nanoindentation creep tests showed the greatest tendency for creep in the {111} indented samples, compared with the samples indented close to the {001} and {101} surfaces. Scanning electron microscopy and cross-sectional transmission electron microscopy revealed slip bands and dislocations in all samples. The slip band patterns on the indented surfaces were influenced by the grain orientations. Deformation twinning was observed only under the {001} indented surfaces. Finally, microstructural analysis and molecular dynamics modeling correlated the anisotropic nanoindentation-creep behavior with the different dislocation substructures formed during indentation, which resulted from the dislocation reactions of certain active slip systems that are determined by the indented grain orientations.

36 MATERIALS SCIENCE↗

Modelling the Fluctuations of Reactive Shock Waves in Heterogeneous Solid Explosives as Stochastic Processes

Although current phenomenological burn models are useful for describing the average or bulk reactive flow behaviour of heterogeneous explosives, one fundamental weakness inherent to these models is the loss of detailed microstructural information at the scale of the calculation. In order to include the effects of the microstructure, and in particular the underlying material heterogeneities that influence the build-up to detonation, a new paradigm is put forth for modelling sub-grid, reaction-induced fluctuations (i.e. “hot spots”) at the continuum level. This modelling approach assumes that the reaction rate is stochastic, rather than deterministic, and it uses Langevin-type equations with a mathematical framework built upon Itô calculus and Lambourn's CIM model for shocked heterogeneous explosives. This approach follows directly from our previous letter, Ref. [1], and is inspired by the probability density function (pdf) methods used in turbulent reactive flows. Here, the stochastic burn model is derived, implemented, and exercised far beyond what has been shown in previous work. New hydrocode simulation results demonstrate the role of stochastic fluctuations during shock initiation; these fluctuations are approximated by collections of discrete particles, that evolve with drift (i.e. deterministic) and diffusion (i.e. stochastic) coefficients. Furthermore, the particle values are propagated and averaged to calculate the heat release, yield strength, and material impedance in each computational cell. Hydrocode simulation results further show how the fluctuating hot spot energy may or may not be transmitted to the wave front, and result in a detonation wave-like structure. The fundamental stochastic nature of this model permits simulations to have varying outcomes with the same initial conditions; this allows for go/no-go estimation (e.g., marginal or failed detonations), which might possibly be calibrated using the statistical distributions from real materials. Mesoscale calculations of shocked heterogeneous explosives also show that these fluctuations are physically justified (i.e., Ref. [2]), and it is hypothesized that the pdf functions provide a link between the meso(grain) and continuum scales for practical engineering calculations. Hence, our approach is a paradigm shift for building efficient, reduced order continuum burn models, that represent the sub-grid stochastic behaviour of shocked heterogeneous solid explosives.

42 ENGINEERING↗

The characterization of microstructure and chemistry of transmutation fuels

The goal of the fast reactor development programs is fabrication and certification of a nuclear fuel system that performs all functions of a conventional fuel while destroying recycled actinides. Metal fuels, such as U-Pu-Zr fuels, are considered to be candidates for this application. The physical and mechanical properties, as well as behavior laws and correlations of metal alloy fuel, all of which define the behavior and performance of metal alloy fuels has been investigated in detail. The results indicated that the prospect for fueling a future fast spectrum reactor using metal fuels is excellent. There are several challenges associated with the fuel implementation in reactor environment. One of the limiting factors in lifetime and safety of thermal and fast reactor systems is fuel swelling and resulting fission product transport to cladding. Understanding diffusion kinetics and phases formed between metal fuel and cladding upon exposure to high temperatures typical in reactor environment is critical for ensuring integrity, safety, and performance of the material, advancement of this type of fuel in the future, and securing long-term success of the nuclear fleet. The first step to understanding fuel-cladding interaction is investigation of an as-cast fuel microstructure. Despite the importance of these fuels, detailed description of microstructures in these materials is extremely limited. The majority of published results are based on characterization of as-cast microstructures of these fuels in scanning electron microscopes (SEM). In this work, we present the results from microstructural characterization of metallic Pu-based fuels, which is essential in the validation of current and future atomistic and meso-scale modeling efforts. A firm understanding of microstructural evolution in reactor materials is imperative and will lead to deeper understanding of in-reactor degradation behavior, creating a new generation of radiation-resistant materials and fuels with the potential for significant increases in burn-up.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A REDUCED ORDER MODELING APPROACH TO PROBABILISTIC CREEP-DAMAGE PREDICTIONS IN FINITE ELEMENT ANALYSIS

This paper introduces a computationally efficient Reduced Order Modeling (ROM) approach for the probabilistic prediction of creep-damage failure. Component-level probabilistic simulations are needed to assess the reliability and safety of high-temperature components. Full-scale probabilistic creep-damage modeling in finite element (FE) approach is computationally expensive requiring many hundreds of simulations to replicate the uncertainty of component failure. To that end, ROM is proposed to minimize the elevated computational cost while controlling the loss of accuracy. It is proposed that full-scale probabilistic simulations can be completed in 1D at a reduced cost, the extremum conditions extracted, and those conditions applied for lower-cost 2D/3D probabilistic simulations of components that capture the mean and uncertainty of failure. The probabilistic Sine-hyperbolic (Sinh) model is selected which in previous work was calibrated to alloy 304 stainless steel. The Sinh model includes probability density functions (pdfs) for test condition (stress and temperature), initial damage (i.e. microstructure), and material properties uncertainty. The Sinh model is programmed into ANSYS finite element software using the USERCREEP.F material subroutine. First, the Sinh model and FE code are subject to verification and validation to ensure the accuracy of the simulations. Numerous Monte Carlo simulations are executed in a 1D model to generate probabilistic creep deformation, damage, and rupture data. This data is analyzed and the probabilistic parameters corresponding to extreme creep response are extracted. The ROM concept is applied where only the extreme conditions are applied in the 2D probabilistic prediction of a component. The probabilistic predictions between the 1D and 2D geometry is compared to assess ROM for creep. The accuracy of the probabilistic prediction employing the ROM approach will potentially reduce the time and cost of simulating complex engineering systems. Future studies will introduce multi-stage Sinh, stochasticity, and spatial uncertainty for improved prediction.

36 MATERIALS SCIENCE↗

Understanding and control of Zener pinning via phase field and ensemble learning

Zener pinning refers to the dispersion of fine particles which influences grain size distribution via movement of grain boundaries in a polycrystalline material. Grain size distribution in polycrystals has a significant impact on their properties including physical, chemical, mechanical, and optical to name a few. We explore the use of Phase-field modeling and machine-learning techniques to understand and improve the control of grain size distribution via Zener pinning in polycrystalline materials. We develop a machine learning model that determines the relative importance of various parameters to exercise microstructure control via Zener pinning. Our workflow combines high-throughput phase-field simulations and machine learning to address the computational bottlenecks associated with large-scale simulations as well as identify features necessary for microstructure control in polycrystals. A random forest (RF) regression model was developed to predict grain sizes based on five Phase-field model parameters, achieving an average prediction error of 0.72 nm for the training data and 1.44 nm for the test data. The importance of the input parameters is analyzed using the SHapley Additive exPlanations (SHAP) approach which reveals that diffusivity, volume fraction, and particle diameter are the most important parameters in determining the final grain size. These findings will allow us to select the best second-phase particles, optimize grain size distributions and thus design microstructures with the desired properties. The developed method is a highly versatile and generalizable approach that can be used to assess the combined effects of individual features in the presence of multiple variables.

36 MATERIALS SCIENCE↗

From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample

We follow an Al-12 at. pct Cu alloy sample from the liquid state to mechanical failure, using in situ X-ray radiography during directional solidification and tensile testing, as well as three-dimensional computed tomography of the microstructure before and after mechanical testing. The solidification processing stage is simulated with a multi-scale dendritic needle network model, and the micromechanical behavior of the solidified microstructure is simulated using voxelized tomography data and an elasto-viscoplastic fast Fourier transform model. This study demonstrates the feasibility of direct in situ monitoring of a metal alloy microstructure from the liquid processing stage up to its mechanical failure, supported by quantitative simulations of microstructure formation and its mechanical behavior.

36 MATERIALS SCIENCE↗

Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint

Friction stir welding (FWS) is regarded as a more plausible alternative to other welding methods for Al-Cu dissimilar joining. However, the structure of an FSW joint is different from others. In this study, lap joints of 6061 aluminum alloy and commercially pure copper were produced by FSW, and the effects of rotation rate on macromorphology, microstructure and mechanical properties were investigated. In addition, a fracture J integral model was used to analyze the effect of microstructure on the mechanical properties. The results revealed that the macrodefect-free joints were obtained at a feed rate of 150 mm/min and 1100 rpm and that the failure load of the joint reached as high as 4.57 kN and only reached 2.91 kN for the 900 rpm, where tunnel defects were identified. Particle-rich zones composed of Cu particles dispersed in an Al matrix, and “Flow tracks” were observed by the EDS. The J integral results showed that the microdefects on the advancing side cause serious stress concentration compared with the microdefects located on the Al-Cu interface, resulting in the fracture of the joints.

36 MATERIALS SCIENCE↗

Data-driven reduced-order models for rank-ordering the high cycle fatigue performance of polycrystalline microstructures

Computationally efficient estimation of the fatigue response of polycrystalline materials is critical for the development of next generation materials in application domains such as transportation, health, security, and energy industries. This is non-trivial for fatigue of polycrystalline metals since the initiation and growth of fatigue cracks depends strongly on attributes of the microstructure, such as the sizes, shapes, orientations, and neighbors of individual grains. Furthermore, regions of microstructure most likely to initiate cracks correspond to the tails of the distributions of the microstructure features. This requires the execution of large numbers of experiments or simulations to capture the response of the material in a statistically meaningful manner. In this work, a linkage is described to connect polycrystalline microstructures to the statistically signified driving forces controlling the high cycle fatigue (HCF) responses. This is achieved through protocols that quantify these microstructures using 2-pt spatial correlations and represent them in a reduced-dimensional space using principal component analysis. Reduced-order relationships are then constructed to link microstructures to performance characteristics related to their HCF responses. As a result, these protocols are demonstrated for α-titanium, which exhibits heterogeneous microstructure features along with significant elastic and inelastic anisotropies at both the microscale and the macroscale.

2-point correlations↗

Development and preliminary validation of a mechanistic multiscale model for fuel-cladding chemical interaction in metallic nuclear fuels

Despite decades of fuel rod material and design improvements, fuel-cladding chemical interaction (FCCI) remains the single-most lifetime-limiting behavior for modern metallic fuel rods. Constraining fuel lifetime increases operating costs, limiting the economic viability of commercializing metallic nuclear fuel technology. A mechanistic multiscale model utilizing the finite element method-based MARMOT and BISON codes was developed to more confidently predict cladding-side FCCI and its impact on fuel performance. The new BISON model incorporates mesoscale models for the effects of fuel microstructure evolution on the transport of wastage-inducing lanthanides through the fuel and for the kinetics of cladding wastage layer growth. The mesoscale models, in turn, build on lanthanide transport property data obtained from the atomistic scale. Preliminary validation studies using wastage thickness and cladding profilometry data from four fuel rods irradiated in Experimental Breeder Reactor II experiment X447 and one fuel rod from Fast Flux Test Facility experiment IFR1 show that the new model predicts cladding wastage and its effects on cladding deformation as well as existing empirical FCCI correlations. The new model is expected to aid in the design of new metallic fuel concepts, including fuel additives, cladding liners, and sodium-free annular fuel geometries. In conclusion, future work will focus on broader validation and refinement of the model’s treatment of different fuel alloys and cladding materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tritium Transport Modeling at the Pore Scale in Ceramic Breeder Materials Using TMAP8

Fusion reactors depend on the blanket material to breed and release tritium at the same rate or faster than it is consumed by the fusion reaction. Cellular ceramic breeders (CCBs) are dense materials that can maintain a high tritium breeding ratio while promoting tritium release because of highly connected pores. Assessing the tritium breeding capabilities of these materials requires a combination of extensive experimental and modeling efforts. In this work, we develop and calibrate a multiphysics model of tritium transport. This novel model accounts for ceramic and pore diffusion, trapping and detrapping, and several surface reactions at the pore surface. We perform a sensitivity analysis and calibrate the model by comparing its predictions against experimental measurements of deuterium absorption. The calibrated model is then used to model tritium absorption in samples with different pore microstructures to investigate the effect of pore interconnectivity on tritium absorption. The model is part of the development of the multiscale, multiphysics framework for tritium transport [i.e., the Tritium Migration Analysis Program (TMAP8)], which is itself built on top of the finite-element multiphysics framework multiphysics object-oriented simulation environment (MOOSE). This study demonstrates some of TMAP8’s capabilities and is the first step toward assessing the tritium breeding capabilities of ceramic breeder material designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TRITIUM TRANSPORT MODELING AT THE PORE SCALE IN CERAMIC BEEDER MATERIALS USING TMAP8

Fusion reactors depend on the blanket material to breed and release tritium at the same rate or faster than it is consumed by the fusion reaction. Cellular ceramic breeders are dense materials that can maintain a high tritium breeding ratio while promoting tritium release thanks to highly connected pores. Assessing the tritium breeding capabilities of these materials requires a combination of extensive experimental and modeling efforts. In this work, we develop and calibrate a multiphysics model of tritium transport. This novel model accounts for ceramic and pore diffusion, trapping and detrapping, and several surface reactions at the pore surface. We perform a sensitivity analysis and calibrate the model by comparing its predictions against experimental measurements of deuterium absorption. The calibrated model is then used to model tritium absorption in samples with different pore microstructures to investigate the effect of pore interconnectivity on tritium absorption. The model is part of the development of the multiscale, multiphysics framework for tritium transport (i.e., the Tritium Migration Analysis Program [TMAP8]), which is itself built on top of the finite element multiphysics framework MOOSE. This study demonstrates some of TMAP8’s capabilities, and is the first step toward assessing the tritium breeding capabilities of ceramic breeder material designs.

08 HYDROGEN↗

Assessment of MARMOT Grain Growth Model

This report assesses the MARMOT grain growth model by comparing modeling predictions with experimental results from thermal annealing. The purpose here is threefold: (1) to demonstrate the validation approach of using thermal annealing experiments with non-destructive characterization, (2) to test the reconstruction capability and computation efficiency in MOOSE, and (3) to validate the grain growth model and the associated parameters that are implemented in MARMOT for UO 2 . To assure a rigorous comparison, the 2D and 3D initial experimental microstructures of UO 2 samples were characterized using non-destructive Synchrotron x-ray. The same samples were then annealed at 2273K for grain growth, and their initial microstructures were used as initial conditions for simulated annealing at the same temperature using MARMOT. After annealing, the final experimental microstructures were characterized again to compare with the results from simulations. So far, comparison between modeling and experiments has been done for 2D microstructures, and 3D comparison is underway. The preliminary results demonstrated the usefulness of the non-destructive characterization method for MARMOT grain growth model validation. A detailed analysis of the 3D microstructures is in progress to fully validate the current model in MARMOT.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Role of crystallographic orientation on intragranular void growth in polycrystalline FCC materials

In this study, we study the effect of crystallographic orientation and applied triaxiality on the growth of intragranular voids. Two 3D full-field micromechanics methods are used, the dilatational visco-plastic fast-Fourier transform (DVP-FFT) and the crystal plasticity Finite Elements (CP-FE), both of which incorporate a combination of crystalline plasticity and dilatational plasticity. We demonstrate with several select cases that predictions of void growth from both formulations agree qualitatively. With the more computationally efficient DVP-FFT, additional effects of polycrystalline microstructure and the influence of nearest neighborhood are investigated. Crystals bearing a single intracrystalline void are studied in three types of 3D microstructural environments: isolated single crystals, individual equal-sized grains within a regular polycrystal, and individual variable sized grains within a polycrystal with grains and voids randomly located. We show that loading type plays a significant role. In strain-rate controlled conditions, voids in the hardest [111]-crystals grow the fastest in time, whereas in stress-controlled conditions, voids in the softest [100]-crystal grow the fastest in time. The analysis reveals that on average void growth is slower for the same starting orientation in the polycrystal than in the single crystal. We find that at the highest triaxiality tested that the correlation between crystal orientation and void growth rate in the polycrystal strengthens, drawing closer to that seen in the isolated single crystals. These results and model can help guide the microstructural design of polycrystalline materials with high strength and damage-tolerance in high-rate deformation.

36 MATERIALS SCIENCE↗

Sparse thermal data for cellular automata modeling of grain structure in additive manufacturing

Grain growth in the wake of the melt pool formed during alloy-based additive manufacturing (AM) is complex and multifaceted, depending on parameters governing heat transport, fluid flow, and solidification itself. Cellular automata (CA) models have proven effective in providing computationally efficient and physically sound predictions of grain structure for several AM problems, but their efficiency is tied to the performance of heat transport models. CA models use only a small portion of the problem's temperature data (near the moving melt pool boundary), and much of the CA calculations do not affect the final result due to re-melting of material. Coupling of and communication between heat transport and solidification models, and eliminating operations irrelevant towards final grain structure prediction, will be necessary for using these methods for efficient simulation of large parts. In this work, we introduce a procedure of decoupling the CA from temperature field simulation, using files of relevant temperature data written by the heat transport model. This approach is validated against the standard coupling approach using data obtained through the computational fluid dynamics software OpenFOAM. Negligible differences are seen in grain size, volume, and texture distributions for multilayer simulation of test problems, while the quantity of temperature data for these test problems was reduced by four orders of magnitude (from 100s of GB to 10s of MB) and the code performance sped up by a factor of around 50. Furthermore, variability in microstructure as a function of cell size, substrate, time step, and nucleation parameters is studied, and it is found that cell sizes less than or equal to 1.67 μm and sufficiently small time steps yield Αstatistically equivalent microstructures. Finally, a potential use case for this CA approach—the layer-wise convergence in grain structure starting from extremes in initial grain size—is examined. This approach's ability to simulate expected trends in nucleation and epitaxial grain growth for large regions of microstructure, simulated independently of heat transport models themselves, should prove useful for investigation of various microstructure uncertainties and prediction of part-scale experimental results.

36 MATERIALS SCIENCE↗