Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Ethanol-thermal synthesis of Cd{sub 1-x}Zn{sub x}S nanoparticles with enhanced photodegradation of 4-chlorophenol

Cd{sub 1-x}Zn{sub x}S nanoparticles were prepared by a one-pot solvothermal process from Zn(CH{sub 3}COO){sub 2}, Cd(CH{sub 3}COO){sub 2} and NaS{sub 2}CNEt{sub 2}.3H{sub 2}O (sodium diethyldithiocarbamate, DDTC). The Cd{sub 1-x}Zn{sub x}S nanoparticles were characterized by X-ray powder diffraction, transmission electron microscope and high-resolution transmission electron microscope equipped with an energy-dispersive X-ray spectrometer. The absorption spectra of the Cd{sub 1-x}Zn{sub x}S nanoparticles can be tuned into visible region by modulating stoichiometric ratio between Zn and Cd. With the increase of Zn content, the Cd{sub 1-x}Zn{sub x}S nanoparticles showed an enhanced photocatalytic activity on degradation of 4-chlorophenol. The Cd{sub 1-x}Zn{sub x}S prepared under the optimal experimental condition (initial Zn/Cd = 3:1, 210 {sup o}C, 24 h, in ethanol) possessed the best photocatalytic activity. The conversion ratio could reach up to 84% after 12 h under irradiation of visible light for Cd{sub 1-x}Zn{sub x}S prepared in ethanol, which was obviously superior to those of products prepared in water. These results showed that both crystallinity and synthetic medium were responsible for the enhanced photocatalytic activity for 4-chlorophenol.

36 MATERIALS SCIENCE↗

Cetyltrimethyl ammonium bromide assisted hydrothermal growth of hematite hollow cubes

Hematite hollow cubes have been prepared by forced hydrolysis of ferric chloride solutions under hydrothermal conditions. The effects of reaction time, reaction temperature and cetyltrimethyl ammonium bromide on the transformation process from akageneite to hematite were investigated in detail. The products were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. It is found that cetyltrimethyl ammonium bromide was a critical factor influencing the phase transformation process of akageneite and the final morphology of the as-prepared products. With cetyltrimethyl ammonium bromide, hematite hollow cubes and porous spheres were obtained. Otherwise only dense cubes were observed even prolonging reaction time or increasing reaction temperature. The mechanism was proposed.

36 MATERIALS SCIENCE↗

Microstructure and DC electrical conductivity of spinel nickel ferrite sintered in air and nitrogen atmospheres

In recent years, the development of inert anode materials has gained considerable attention because such materials are capable of producing only environment-friendly O{sub 2} and saving energy during aluminum electrolysis. Nickel ferrite was prepared by a solid-state reaction as the inert anode in this study and its microstructures and direct current conductivities were analyzed in detail regarding the effects of different sintering atmospheres. A single-phase spinel structure was confirmed for all samples by X-ray powder diffraction. The grain sizes and the relative densities of the samples sintered in nitrogen increased by over 7 {mu}m and 10.8%, respectively, compared to those sintered in air. The direct current conductivities of the samples sintered in nitrogen showed a drastic increase compared to those sintered in air, believed to be due to the effects of increased Fe{sup 2+} ion concentration at octahedral sites and the increase of the relative density.

36 MATERIALS SCIENCE↗

Electrochemical properties and controlled-synthesis of hierarchical {beta}-Ni(OH){sub 2} micro-flowers and hollow microspheres

{beta}-Ni(OH){sub 2} hierarchical micro-flowers, hierarchical hollow microspheres and nanosheets were synthesized via a facile, single-step and selected-control hydrothermal method. Both hierarchical micro-flowers and hierarchical hollow microspheres were built from two-dimensional nanosheets with thickness of 50-100 nm. The as-obtained products were characterized by Brunauer-Emmett-Teller (BET) surface area analysis, X-ray powder diffraction (XRD) and field emission scanning electron microscopy (FESEM). It was observed that marked morphological changes in {beta}-Ni(OH){sub 2} depended on the initial concentrations of Ni{sup 2+} ions and glycine. A possible growth mechanism was proposed based on experimental results. In addition, the effect of morphology on the electrochemical properties was also investigated. Both hierarchical micro-flowers and hierarchical hollow microspheres exhibited enhanced specific capacity and high-rate discharge ability as compared with pure Ni(OH){sub 2} nanosheets. Investigations confirmed that hierarchical structures had a pronounced influence upon the electrochemical performance of nickel hydroxide.

36 MATERIALS SCIENCE↗

Characterization of exfoliated/delamination kaolinite

A novel and facile approach for the preparation of exfoliated/delamination kaolinite was reported in this study. Kaolinite was mechanochemically activated by grinding with dimethylsulfoxide in a globe mill for different periods of time, and then the activated samples were treated for several hours at 120 {sup o}C to obtain the precursors of kaolinite. The resulting materials were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The experimental data indicated that the clay layers were well exfoliated/delamination under mechanochemical effect in a significantly short intercalation time. The expansion of the basal spacing (d{sub 001}) of raw kaolinite by 0.40 nm pointed out that the hydrogen bonds between adjacent kaolinite layers were partially broken as a result of the intercalation with dimethylsulfoxide.

36 MATERIALS SCIENCE↗

Influence of the B-site ordering on the magnetic properties of the new La{sub 3}Co{sub 2}MO{sub 9} double perovskites with M = Nb or Ta

Double perovskites La{sub 3}Co{sub 2}NbO{sub 9} and La{sub 3}Co{sub 2}TaO{sub 9} have been prepared by both solid state and sol-gel synthesis. The crystal structures have been studied from X-ray and neutron powder diffraction data. Rietveld refinements show that the crystal structure is monoclinic (P2{sub 1}/n), with different degrees of ordering of B' and B'' cations, with octahedra tilted according to the Glazer notation a{sup -}b{sup -}c{sup +}. Occupancy refinements show that the solid state materials are more B-site ordered than the sol-gel ones. Magnetization measurements show that these perovskites show two magnetic contributions, one with spontaneous magnetization and other with linear behaviour with the magnetic field associated to antiferromagnetic correlations. In the samples synthesized by solid state the spontaneous magnetization is more important than those synthesized by the sol-gel and present T{sub C} of 62 K for Nb and 72 K for Ta. On the other hand, materials prepared by sol-gel have T{sub C} 20 K for Nb and 40 K for Ta, respectively and major presence of the antiferromagnetic contribution. The competition between these magnetic behaviours is interpreted, by a microscopic point of view, as to be due to the different degrees of Co{sup 2+} ions disorder on the B site of the double perovskite structure. This disorder affects the ratio between the antiferromagnetic Co{sup 2+}-O-Co{sup 2+} and the ferromagnetic Co{sup 2+}-O-M{sup 5+}-O-Co{sup 2+} couplings proposed for the system.

36 MATERIALS SCIENCE↗

Effect of Bi and Ti substitutions for Na and Nb on ferroelectric properties of oriented (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} compounds

Research highlights: {yields} (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} formed solid solution over whole composition range. {yields}P{sub r} of BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing composition x. {yields} By using hot forging, P{sub r} of BNTNW at x = 0 was extremely improved (P{sub r} = 18 {mu}C/cm{sup 2}). -- Abstract: (Bi{sub 4.5+x}Na{sub 0.5-x})(Ti{sub 2x}Nb{sub 2-2x})WO{sub 15} (BNTNW) compounds were synthesized and their ferroelectric properties were characterized. The X-ray powder diffraction patterns of the compounds revealed that they have a single phase over the whole composition range. The linear variations of the lattice parameters with composition indicate the formation of solid solutions, resulting in a reduction in the orthorhombicity of the compounds. The remnant polarization of the BNTNW decreased from 8.5 to 5.1 {mu}C/cm{sup 2} with increasing x, which may be related to the orthorhombicity of the compounds. By using hot forging, an oriented BNTNW compound at x = 0 was obtained. Strong reflections from (0 0 l) were observed for sample // in which the measurement direction is parallel and the orientation factor of such sample was approximately 0.72. A remarkable increase in the remnant polarization (P{sub r}) of the compound was observed for the sample -perpendicular in which the direction of applied pressure is perpendicular to the measurement direction; the highest P{sub r} value was 18 {mu}C/cm{sup 2}.

36 MATERIALS SCIENCE↗

The crystal and magnetic structure of Ti-substituted LaCrO{sub 3}

Graphical abstract: Rietveld refinement plot of La(Cr{sub 0.90}Ti{sub 0.10})O{sub 3}; the inset shows the antiferromagnetic G{sub x}-type structure occurring at the Cr sub-lattice. Research highlights: {yields} Magnetic structure of Ti-substituted LaCrO{sub 3}. {yields} Spins on the Cr-site order according to an antiferromagnetic G{sub x}-type ordering. {yields} Limited solid state solubility of Ti{sup 4+} in LaCrO{sub 3} and mixed valence at Cr site. -- Abstract: The crystal and magnetic structures of LaCrO{sub 3} and La(Cr{sub 0.90}Ti{sub 0.10})O{sub 3} have been investigated between 5 and 350 K by means of neutron powder diffraction and DC magnetic measurements. Both compounds are characterized by an antiferromagnetic G{sub x}-type ordering at low temperature. Structural features suggest the occurrence of Ti in the tetra-valent state. Despite the mixed valence induced by Ti-substitution leading to the occurrence of the Jahn-Teller species Cr{sup 2+}, no evidence for long range ferromagnetism can be detected. On account of a miscibility gap, a higher degree of Ti-substitution at the Cr site cannot be achieved; as a consequence the solid state solubility of Ti in LaCrO{sub 3} at 1573 K has been ascertained.

36 MATERIALS SCIENCE↗

Synthesis, deposition and characterization of magnesium hydroxide nanostructures on zeolite 4A

Research highlights: {yields} Reports a simple precipitation-growth method to produce nanostructures of Mg(OH){sub 2} on the surface of zeolite 4A. {yields} Able to control the growth of the nanostructures by manipulating the experimental procedure. {yields} Able to deposit Mg(OH){sub 2} onto specific sites namely bridging hydroxyl protons (SiOHAl) on the surface of zeolite 4A. -- Abstract: The precipitation and self-assembly of magnesium hydroxide Mg(OH){sub 2} nanopetals on dispersed zeolite 4A particles was investigated. Mg(OH){sub 2}/zeolite nanocomposites were produced from magnesium chloride solutions and characterized via X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier transform infrared analysis (FTIR), and solid state NMR. It was determined that Mg(OH){sub 2} interacted with bridging hydroxyl protons (SiOHAl) on the zeolite surface, but not with silanol or aluminol groups. NMR analysis showed that 13% of the tetrahedral Al sites on the zeolite were converted to octahedral Al. The zeolite structure and crystallinity remained intact after treatment, and no dealumination reactions were detected. This suggests that the deposition-precipitation process at ambient conditions is a facile method for controlling Mg(OH){sub 2} nanostructures on zeolites.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic activity of titania microspheres with hierarchical structures

Research highlights: {yields} Lauryl alcohol directs the formation of titania with hierarchical structures. {yields} Hierarchical structures endow the higher specific area to titania. {yields} Titania had a higher photocatalytic activity than commercial Degussa P25. {yields} The synthesis process of the target product is low-cost. -- Abstract: A combined sol-gel and solvothermal process was introduced to fabricate the titania microspheres with hierarchical structures by using lauryl alcohol as the structure-directing agent. Scanning electron microscope, high-resolution transmission electron microscope, Fourier transform infrared spectrograph and powder X-ray powder diffraction indicated that the molar ratio of lauryl alcohol, water and tetra-n-butyl titanate was the key factor for the formation of the mono-dispersed titania with anatase phase and the optimal ratio was 1.2:4:1. The diameter of the end-product was 523 {+-} 74 nm and it was composed of smaller nanoparticles with about 6.8 nm size in diameter. Photocatalytic activity of the end-product was investigated by employing Rhodamine B and Methylene blue as the model compounds. The target microspheres exhibited the higher photocatalytic efficiency compared with commercial Degussa P25 titania and this result might be due to the hierarchical structures of microspheres according to the analysis of Brunauer-Emmett-Teller specific surface areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled fabrication of SrMoO{sub 4} hierarchical nanosheets in a surfactant-assisted nonaqueous system

Research highlights: {yields} An imitated nonaqueous microemulsion system was developed. {yields} Various hierarchical architectures of SrMoO{sub 4} nanosheets were fabricated. {yields} The solvent, surfactant, reaction temperature and reaction time were important. {yields} The products emit a strong blue (474 nm) and weak green (573 nm) luminescence. -- Abstract: Various hierarchical architectures of SrMoO{sub 4} nanosheets (thickness of 8-9 nm) have been successfully prepared in nonaqueous system by a surfactant-assisted solvothermal method. X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy were employed to study the crystal structure and morphologies of the products. Experiments showed that the solvent, surfactant, reaction temperature and reaction time were crucial for the oriented aggregation of the SrMoO{sub 4} nanosheets. Morphological control of these parameters resulted in platelet, column, interlaced multilayer and nest of nanosheets. A possible growth mechanism for these hierarchical architectures has also been proposed according to the morphological evolution with the reaction time. The optical properties of the products were also examined by means of photoluminescence and excitation spectroscopy. Photoluminescence studies revealed that these SrMoO{sub 4} nanocrystals exhibited a greatly strong blue emission under 325-nm excitation with different intensities but centered at the same position of 474 nm.

36 MATERIALS SCIENCE↗

Controlled self-assembly of PbS nanoparticles into macrostar-like hierarchical structures

Graphical abstract: The aggregation and rotation of nanoparticles to adopt parallel orientations in three dimensions was indirectly illustrated by TEM and HRTEM images. Highlights: {yields} Macrostar-like PbS hierarchical structures was successfully synthesized by a simple hydrothermal method and mesostars were assembled from the PbS nanocube building blocks with edge lengths of about 100 nm. {yields} Ostwald-ripening-assisted oriented attachment is believed to play a key role in the growth behavior of novel 3D structures. {yields} Optical properties indicating few defects on the surface of the PbS structure and exhibit large blue-shifts compared to bulk PbS. -- Abstract: The synthesis of macrostar-like PbS hierarchical structures by a simple hydrothermal method at 180 {sup o}C for 24 h is proven successful with the assistance of a new surfactant called tetrabutylammonium bromide (TBAB). The as-obtained product is characterized by means of X-ray powder diffraction, field emission scanning electron microscopy, energy dispersive spectrometry, high resolution transmission electron microscopy, and selected area electron diffraction. The presence of TBAB and NaF plays an important role in the formation of PbS macrostructures. Ostwald-ripening-assisted oriented attachment is believed to play a key role in the growth behavior of novel 3D structures. As such, a possible self-assembly mechanism is proposed to explain the formation of the said structures. The present study aims to introduce new insights into understanding the formation process of such unique hierarchical superstructures.

36 MATERIALS SCIENCE↗

Synthesis and characterization of micrometer Cu/PVP architectures

Graphical abstract: A simple method for the synthesis of novel micrometer flower-like Cu/PVP architectures was introduced. Highlights: {yields} Micrometer flower-like copper/polyvinylpyrrolidone architectures were obtained by a simple chemical route. {yields} The amount of N{sub 2}H{sub 4}{center_dot}H{sub 2}O, the reaction temperature, the molar ratio of CuCl{sub 2} to PVP and different molecular weights of PVP play an important role in the controlling the morphology of the Cu/PVP architectures. {yields} A possible mechanism of the formation of Cu/PVP architectures was discussed. -- Abstract: Micrometer-sized flower-like Cu/polyvinylpyrrolidone (PVP) architectures are synthesized by the reduction of copper (II) salt with hydrazine hydrate in aqueous solution in the presence of PVP capping agent. The resulting Cu/PVP architectures are investigated by UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). The Cu/PVP flowers have uniform morphologies with an average diameter of 10 {mu}m, made of several intercrossing plates. The formation of Cu/PVP flowers is a new kinetic control process, and the factors such as the amount of N{sub 2}H{sub 4}{center_dot}H{sub 2}O, reaction temperature, molar ratio of CuCl{sub 2} to PVP and molecular weight of PVP have significant effect on the morphology of Cu/PVP architectures. A possible mechanism of the formation of micrometer Cu/PVP architectures was discussed.

36 MATERIALS SCIENCE↗

Effect of pH value on particle morphology and electrochemical properties of LiFePO{sub 4} by hydrothermal method

Graphical abstract: The pH value of system is adjusted in the range of 2.5-8.8 by using dilute sulfuric acid and ammonia water. The results indicated that the particle exhibits acute angle diamond flake-like morphology at pH = 2.5. With increase of pH value, the particle gradually becomes to round flake-like and irregular flake-like morphology. The optimal sample synthesized at pH = 6.4 exhibits discharge capacities of 151.8 mAh g{sup -1} at 0.2 C rate and 129.3 mAh g{sup -1} at 3 C rate. Highlights: {yields} The pH value of solution affects greatly on particle morphology. {yields} The solubility product determined the transition of interphases. {yields} The disorder of atoms in crystal is affected by pH value. {yields} LiFePO{sub 4} with high capacity could be synthesized at slight acid or neutral conditions. -- Abstract: Lithium iron phosphate was prepared by hydrothermal synthesis using LiOH.H{sub 2}O, FeSO{sub 4}.7H{sub 2}O and H{sub 3}PO{sub 4} as raw materials. The effects of pH value of reaction solution on particle morphology and electrochemical property were investigated. The pH value of the reaction solution was adjusted in the range of 2.5-8.8 by dilute sulfuric acid and ammonia water. The samples were characterized by field-emission scanning electronic microscope (FE-SEM), X-ray powder diffraction (XRD), constant-current charge/discharge cycling tests and chemical analysis. The results indicated that the particles exhibited acute angle diamond flake-like morphology at pH = 2.5, and as the pH value increased, the particle became hexagon flake-like, round flake-like and irregular flake-like morphology gradually. The optimal sample synthesized at pH = 6.4 exhibited discharge capacities of 151.8 mAh g{sup -1} at 0.2 C rate and 129.3 mAh g{sup -1} at 3 C rate. It was found that pH value affected the morphologies and properties of the product by means of different crystal growth rates.

36 MATERIALS SCIENCE↗

Solid-phase reaction synthesis of mesostructured tungsten disulfide material with a high specific surface area

Highlights: {yields} WS{sub 2} material was synthesized through solid-phase reaction. {yields} (NH{sub 4}){sub 2}WS{sub 4} as precursor and n-octadecylamine as template. {yields} WS{sub 2} material has high specific surface area (145.9 m{sup 2}/g). {yields} The whole preparation process is simple, convenient, green and clean. -- Abstract: A mesostructured tungsten disulfide (WS{sub 2}) material was prepared through a solid-phase reaction utilizing ammonium tetrathiotungstate as the precursor and n-octadecylamine as the template. The as-synthesized WS{sub 2} material was characterized by X-ray powder Diffraction (XRD), Low-temperature N{sub 2} Adsorption (BET method), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The characterization results indicate that the WS{sub 2} material has the typical mesopore structure (3.7 nm) with a high specific surface area (145.9 m{sup 2}/g), and large pore volume (0.18 cm{sup 3}/g). This approach is novel, green and convenient. The plausible mechanism for the formation of the mesostructured WS{sub 2} material is discussed herein.

36 MATERIALS SCIENCE↗

Sonochemical synthesis and photocatalytic property of zinc oxide nanoparticles doped with magnesium(II)

Highlights: {yields} Mg-doped ZnO nanoparticles were synthesized by sonochemical strategy. {yields} Mg-doped ZnO nanoparticles present good photocatalytic properties. {yields} The change of band gap contributes to their high efficiency in photocatalyst. -- Abstract: Mg-doped ZnO nanoparticles were successfully synthesized by sonochemical method. The products were characterized by scan electron microscopy (SEM) and X-ray powder diffraction (XRD). SEM images revealed that ZnO doped with Mg(II) nanoparticles and ZnO nanoparticles synthesized by the same strategy all had spherical topography. XRD patterns showed that the doped nanoparticles had the same crystals structures as the pure ZnO nanoparticles. The Mg-doped ZnO nanoparticles had larger lattice volume than the un-doped nanoparticles. X-ray photoelectron spectroscopy (XPS) not only demonstrated the moral ratio of Mg and Zn element on the surface of nanoparticles, but their valence in nanoparticles as well. The Mg-doped ZnO nanoparticles presented good properties in photocatalyst compared with pure ZnO nanoparticles.

36 MATERIALS SCIENCE↗

One-pot synthesis of CuFeSe{sub 2} cuboid nanoparticles

Graphical abstract: CuFeSe{sub 2} cuboid nanoparticles with a tetragonal phase have been successfully synthesized via chemical route from a nonaqueous solution of octadecylamine solvent and metal chloride of precursor. Highlights: {yields} CuFeSe{sub 2} cuboid nanoparticles were prepared by a cost-effective and simple one-pot chemical route. {yields} Synthesized temperature and octadecylamine solvent play a significant role in the cuboid shape of nanoparticles. {yields} The nanocrystallinity feature and tetragonal phase of the CuFeSe{sub 2} nanoparticles were confirmed by HRTEM. -- Abstract: Ternary semiconducting CuFeSe{sub 2} nanocrystals of a particular shape and size were successfully synthesized using a cost-effective and simple one-pot chemical route. X-ray powder diffraction and field emission scanning electron microscopy results indicated that the as-synthesized CuFeSe{sub 2} comprised cuboid nanoparticles with dimensions of 50-150 nm as well as a tetragonal phase. Elemental analysis yielded an atomic ratio of Cu:Fe:Se of 1:1.06:2.17. The synthesis temperature and the solvent octadecylamine were significant in determining the structural phases and morphologies of the final products. The optimal condition for synthesizing the tetragonal CuFeSe{sub 2} phase with cuboid nanoparticles was a reaction temperature of 200 {sup o}C for 1 h in octadecylamine solvent. A possible mechanism of the formation of ternary CuFeSe{sub 2} nanoparticles with controllable shapes is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel nanostructure of cadmium oxide synthesized by mechanochemical method

Highlights: {yields} A novel nanostructure of CdO was synthesized by mechanochemical reaction followed by calcination. {yields} Mechanochemical method is a simple and low-cost to synthesize nanomaterials. {yields} The obtained precursor was characterized by FT-IR, NMR techniques and elemental analysis. {yields} SEM images showed cauliflower-like shape of sample with components average diameter of 68 nm. {yields} The rods and tubes bundles with single crystalline nature were revealed by ED pattern and TEM images. -- Abstract: Cauliflower-like cadmium oxide (CdO) nanostructure was synthesized by mechanochemical reaction followed calcination procedure. Cadmium acetate dihydrate and acetamide were used as reagents and the resulting precursor was calcinated at 450 {sup o}C for 2 h in air. The structures of the precursor and resultant product of the heating treatment were characterized using Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and elemental analysis, X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy analysis (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron diffraction pattern (ED). SEM and TEM images revealed the cauliflower-like morphology of the sample. This structure includes the bundles of rods and tubes in nanoscale, which combine with each other and form the resulting morphology with the average diameter, 68 nm of the components. ED pattern indicated the single crystal nature of the formed bundles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗