Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Aluminum cladding oxide growth prediction for high flux research reactors

Aluminum cladding oxidation of research-reactor fuel elements at high power conditions has a disadvantageous effect on fuel performance due to the lower thermal conductivity of the oxide. The oxide growth prediction models available in the literature were mostly developed for low power conditions. To examine the applicability of the models to high power and high temperature test conditions, the models were studied by coupling with the most frequently employed heat transfer coefficient (HTC) correlations including the Dittus-Boelter correlation, the Colburn correlation, the Sieder-Tate correlation, and KAERI-developed correlation. The Griess model over-predicted the oxide growth while the KAERI-Griess model under-predicted the oxide growth for high power tests. The Kim model, coupled with the Colburn correlation, gave most consistent results with the measured data from two BR2 experiments. However, the Kim model was found to be inapplicable to the EUHFRR conditions at the peak power locations if it was coupled with the Dittus-Boelter correlation. A revision of the prediction models to more closely agree with the measured data was recommended. Furthermore, AG3NE and AlFeNi cladding types were tested in the E-FUTURE experiment, and a noticeable (although small) reduction in oxide thickness on the AlFeNi cladding was observed. However, this difference was believed to be only a secondary effect considering other uncertainties in model predictions, so no attempt was made to model the alloying effect.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Development and Evaluation of Occupancy-Aware HVAC Control for Residential Building Energy Efficiency and Occupant Comfort

Occupancy-aware heating, ventilation, and air conditioning (HVAC) control offers the opportunity to reduce energy use without sacrificing thermal comfort. Residential HVAC systems often use manually-adjusted or constant setpoint temperatures, which heat and cool the house regardless of whether it is needed. By incorporating occupancy-awareness into HVAC control, heating and cooling can be used for only those time periods it is needed. Yet, bringing this technology to fruition is dependent on accurately predicting occupancy. Non-probabilistic prediction models offer an opportunity to use collected occupancy data to predict future occupancy profiles. Smart devices, such as a connected thermostat, which already include occupancy sensors, can be used to provide a continually growing collection of data that can then be harnessed for short-term occupancy prediction by compiling and creating a binary occupancy prediction. Real occupancy data from six homes located in Colorado is analyzed and investigated using this occupancy prediction model. Results show that non-probabilistic occupancy models in combination with occupancy sensors can be combined to provide a hybrid HVAC control with savings on average of 5.0% and without degradation of thermal comfort. Model predictive control provides further opportunities, with the ability to adjust the relative importance between thermal comfort and energy savings to achieve savings between 1% and 13.3% depending on the relative weighting between thermal comfort and energy savings. In all cases, occupancy prediction allows the opportunity for a more intelligent and optimized strategy to residential HVAC control.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1973

Mathematical model for predicting human vertebral fracture

Mathematical model has been constructed to predict dynamic response of tapered, curved beam columns in as much as human spine closely resembles this form. Model takes into consideration effects of impact force, mass distribution, and material properties. Solutions were verified by dynamic tests on curved, tapered, elastic polyethylene beam.

Benedict, J. V.↗
DOE OSTI2022

Liquid Core Detection and Strand Condition Monitoring in a Continuous Caster Using Optical Fiber

Real-time monitoring of the liquid core position during the continuous casting of steel has been demonstrated using low-cost distributed optical-fiber-based strain sensors. These sensors were installed on the containment roll support structures in the segments of a production continuous caster to detect the position of the solid–liquid interface and monitor the strand condition during the continuous casting. Distributed Fiber Bragg Grating sensors (FBGs) were used in this work to monitor strain at six roll positions in the caster. The sensor performance was first validated by comparing optical strain measurements with conventional strain gauge measurements in the lab. Next, optical strain measurements were performed on an isolated caster segment in a segment maintenance facility using hydraulic jacks to simulate the presence of a liquid core under the roll. Finally, the sensors were evaluated during caster operation. The sensors successfully detected the load increase associated with the presence of a liquid core under each instrumented roll location. Incidents of bulging and roll eccentricity were also detected using frequency analysis of the optical strain signal. The liquid core position measurements were compared using predictions from computer models (digital twins) in use at the production site. The measurements were in good agreement with the model predictions, with a few exceptions. Under certain transient caster operating conditions, such as spraying practice changes and SEN exchanges, the model predictions deviated slightly from the liquid core position determined from strain measurements.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Mean Climate and Tropical Rainfall Variability in Aquaplanet Simulations Using the Model for Prediction Across Scales‐Atmosphere

Abstract Aquaplanet experiments are important tools for understanding and improving physical processes simulated by global models; yet, previous aquaplanet experiments largely differ in their representation of subseasonal tropical rainfall variability. This study presents results from aquaplanet experiments produced with the Model for Prediction Across Scales‐Atmosphere (MPAS‐A)—a community model specifically designed to study weather and climate in a common framework. The mean climate and tropical rainfall variability simulated by MPAS‐A with varying horizontal resolution were compared against results from a recent suite of aquaplanet experiments. This comparison shows that, regardless of horizontal resolution, MPAS‐A produces the expected mean climate of an aquaplanet framework with zonally symmetric but meridionally varying sea‐surface temperature. MPAS‐A, however, has a stronger signal of tropical rainfall variability driven by convectively coupled equatorial waves. Sensitivity experiments with different cumulus parameterizations, physics packages, and vertical grids consistently show the presence of those waves, especially equatorial Kelvin waves, in phase with lower‐tropospheric convergence. Other models do not capture such rainfall‐kinematics phasing. These results suggest that simulated tropical rainfall variability depends not only on the cumulus parameterization (as suggested by previous studies) but also on the coupling between physics and dynamics of climate and weather prediction models.

Rios‐Berrios, R.↗
NASA NTRS2008

On Convergence of Development Costs and Cost Models for Complex Spaceflight Instrument Electronics

Development costs of a few recent spaceflight instrument electrical and electronics subsystems have diverged from respective heritage cost model predictions. The cost models used are Grass Roots, Price-H and Parametric Model. These cost models originated in the military and industry around 1970 and were successfully adopted and patched by NASA on a mission-by-mission basis for years. However, the complexity of new instruments recently changed rapidly by orders of magnitude. This is most obvious in the complexity of representative spaceflight instrument electronics' data system. It is now required to perform intermediate processing of digitized data apart from conventional processing of science phenomenon signals from multiple detectors. This involves on-board instrument formatting of computational operands from row data for example, images), multi-million operations per second on large volumes of data in reconfigurable hardware (in addition to processing on a general purpose imbedded or standalone instrument flight computer), as well as making decisions for on-board system adaptation and resource reconfiguration. The instrument data system is now tasked to perform more functions, such as forming packets and instrument-level data compression of more than one data stream, which are traditionally performed by the spacecraft command and data handling system. It is furthermore required that the electronics box for new complex instruments is developed for one-digit watt power consumption, small size and that it is light-weight, and delivers super-computing capabilities. The conflict between the actual development cost of newer complex instruments and its electronics components' heritage cost model predictions seems to be irreconcilable. This conflict and an approach to its resolution are addressed in this paper by determining the complexity parameters, complexity index, and their use in enhanced cost model.

Kizhner, Semion↗
DOE OSTI2022

Integrated Computational Materials and Mechanical Modeling for Additive Manufacturing of Alloys with Graded Structure Used in Fossil Fuel Power Plants

Wire-arc additive manufacturing (WAAM) has demonstrated its unique capability of producing large-size alloy components with a significantly reduced fabrication time and enhanced geometry design freedom. In this project, the team has developed an ICME (Integrated Computational Materials Engineering) modeling framework, which supports the WAAM of the AUSC (Advanced Ultra-Supercritical) power plant components. The manufacturing design has been applied to Inconel 740H, steel P91, as well as the dissimilar alloy components between steel P91 and Inconel 740H. The ICME model framework is developed by considering two types of modeling. First, mechanistic modeling has been applied to control the printing quality and understand the sequence of the dissimilar printing of the wall structure. The following models have been included in the developed ICME framework: finite element thermal model, grain structure model, residual stress simulation, crystal plasticity model, CALPHAD-based precipitation kinetic model, phase stability prediction, thermal expansion predictive model, and heuristic creep model. Secondary, a physics-based machine learning model has also been developed based on the ICME model structure. The machine learning model development is based on the ICME model prediction with calibration of the experiments. In addition, the WAAM has been utilized as a high-throughput experimental tool rapidly generating a gradient of alloy composition to facilitate experimental database generation for process-structure-property relationships. Such a database directly supported the ICME-enhanced machine learning, which further assisted in intermediate composition block design between P91 and 740H. A high-throughput screening study of the oxidation resistance has been performed based on such high-throughput experimentation. Based on the computational design, several dissimilar alloy manufacturing with post-heat treatment have been performed with a comprehensive evaluation of mechanical performance, including hardness mapping, yield strength, creep resistance. In this project, the single component of P91 and 740H processed by WAAM after heat treatment designed by ICME has demonstrated higher performance in yield strength and creep resistance than the wrought materials. The P91 sample prepared by WAAM with ICME-designed heat treatment performs better than P92 in creep resistance. The designed graded alloy printing with intermediate block shows a promising performance that exceeds the traditional welding. Moreover, the current research indicates the high need for location-specific design analysis with uncertainty quantification, an important topic that deserves more dedicated research. The achievement of this project demonstrated the promising future of WAAM in structural alloy manufacturing for energy power plant development. Successful printing requires synergetic efforts made by manufacturing, mechanical, and materials sciences.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1978

Evaluation of ceramics for stator application: Gas turbine engine report

Current ceramic materials, component fabrication processes, and reliability prediction capability for ceramic stators in an automotive gas turbine engine environment are assessed. Simulated engine duty cycle testing of stators conducted at temperatures up to 1093 C is discussed. Materials evaluated are SiC and Si3N4 fabricated from two near-net-shape processes: slip casting and injection molding. Stators for durability cycle evaluation and test specimens for material property characterization, and reliability prediction model prepared to predict stator performance in the simulated engine environment are considered. The status and description of the work performed for the reliability prediction modeling, stator fabrication, material property characterization, and ceramic stator evaluation efforts are reported.

Trela, W.↗
NASA NTRS1980

Status of the DOE/NASA critical gas turbine research and technology project

Activities performed in order to provide an R&T data base for utility gas turbine systems burning coal-derived fuels are described. Experiments were run to determine the corrosivity effects of trace metal contaminants (and potential fuel additives) on gas turbine materials and these results were correlated in a corrosion-life prediction model. Actual fuels were burned in a burner rig hot corrosion test to verify the model. A deposition prediction model was assembled and compared with results of actual coal-derived fuel deposition tests. Thermal barrier coatings were tested to determine their potential for protecting gas turbine hardware from the corrosive contaminants. Several coatings were identified with significantly improved spallation-resistance (and, hence, corrosion resistance).

Clark, J. S.↗
DOE OSTI2020

LA17-V-InverseRadTransportProblem-PD2Kb. Final Project Report

In the inverse radiation transport problem, a radiation signal emanating from an unknown object is used to reconstruct geometric and material parameters of the object , e.g., the mass of special nuclear material (SNM), the isotopic composition of the SNM (e.g., the enrichment of 235U), the thickness of shielding, etc. The inverse radiation transport problem is one of the most fundamental and important in the emergency response mission, and has been addressed in previous NA-22 and NA-42/84 investments by using derivative-free optimization methods. Our project was aimed at (i) consolidating previous work by applying polynomial chaos expansion (PCE) for reducing significantly the number of forward model simulations required by derivative-free optimization methods; (ii) developing a general-purpose framework and stand-alone software for solving the inverse radiation transport problem by applying a new “predictive modeling” methodology (predictive modeling of coupled multi-physics systems, PM_CMPS) which enables the fusing of experimental and computational information; and (iii) developing several benchmarks (for unscattered gamma rays) for demonstrating the quantification of non-Gaussian features (e.g., skewness and kurtosis, which characterize asymmetries and long tails) of response distributions by deterministically and efficiently propagating parameter uncertainties (covariances and higher-order moments, where available) using high-order sensitivities computed by the recently developed comprehensive adjoint sensitivity analysis methodology (C-ASAM). With regard to (i), application of PCE, the most significant accomplishment of this project was an implementation of PCE into INVERSE that significantly reduced computation time for the DiffeRential Evolution Adaptive Metropolis (DREAM) and Differential Evolution (DE) methods. For inverse transport problems with measurements of neutron leakage, neutron multiplication, and neutron-induced gamma-rays, the solution times for the DREAM and DE methods were reduced by factors of 30-300, reducing run times from hours to minutes while maintaining the same accuracy as the standard (non-PCE) DREAM and DE. Speedups were further improved by exploring sparse grid quadrature sets using the Toolkit for Adaptive Stochastic Modeling and Non-Intrusive ApproximatioN (Tasmanian) toolset. An initial exploration of sparse grids indicated that further speedups factors of 5-10 are obtainable. The implementation of PCE in INVERSE is not in a form that users can easily access. With regard to (ii), solving the inverse problem using a predictive modeling paradigm, the most significant accomplishment of this project were the derivation and implementation of adjoint-based second derivatives in neutron and photon transport theory. There are two codes that compute these derivatives. SENSPG computes them for uncollided gamma rays and SENSMG computes them for neutron leakage. SENSMG is open-source code available on github. Other significant accomplishments included a stand-alone code, MULTI-PRED, that implements the predictive modeling paradigm, along with a detailed manual. The code was implemented in the existing INVERSE code for inverse problems, but a head-to-head comparison of inverse methods was not achieved. We also derived and implemented the capability to compute sensitivities for multiplicity measurements into the SENSMG code, and this capability was used in a data assimilation application, but it was not used for solving inverse problems. With regard to (iii), developing benchmarks to demonstrate the importance of high-order sensitivity and uncertainty analysis, the most significant accomplishment of this project were two test problems that showed how important second-order sensitivities are.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Machine learning models inaccurately predict current and future high-latitude C balances

The high-latitude carbon (C) cycle is a key feedback to the global climate system, yet because of system complexity and data limitations, there is currently disagreement over whether the region is a source or sink of C. Recent advances in big data analytics and computing power have popularized the use of machine learning (ML) algorithms to upscale site measurements of ecosystem processes, and in some cases forecast the response of these processes to climate change. Due to data limitations, however, ML model predictions of these processes are almost never validated with independent datasets. To better understand and characterize the limitations of these methods, we develop an approach to independently evaluate ML upscaling and forecasting. We mimic data-driven upscaling and forecasting efforts by applying ML algorithms to different subsets of regional process-model simulation gridcells, and then test ML performance using the remaining gridcells. In this study, we simulate C fluxes and environmental data across Alaska using ecosys, a process-rich terrestrial ecosystem model, and then apply boosted regression tree ML algorithms to training data configurations that mirror and expand upon existing AmeriFLUX eddy-covariance data availability. We first show that a ML model trained using ecosys outputs from currently-available Alaska AmeriFLUX sites incorrectly predicts that Alaska is presently a modeled net C source. Increased spatial coverage of the training dataset improves ML predictions, halving the bias when 240 modeled sites are used instead of 15. However, even this more accurate ML model incorrectly predicts Alaska C fluxes under 21st century climate change because of changes in atmospheric CO 2 , litter inputs, and vegetation composition that have impacts on C fluxes which cannot be inferred from the training data. Our results provide key insights to future C flux upscaling efforts and expose the potential for inaccurate ML upscaling and forecasting of high-latitude C cycle dynamics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2000

Predictive Multiple Model Switching Control with the Self-Organizing Map

A predictive, multiple model control strategy is developed by extension of self-organizing map (SOM) local dynamic modeling of nonlinear autonomous systems to a control framework. Multiple SOMs collectively model the global response of a nonautonomous system to a finite set of representative prototype controls. Each SOM provides a codebook representation of the dynamics corresponding to a prototype control. Different dynamic regimes are organized into topological neighborhoods where the adjacent entries in the codebook represent the global minimization of a similarity metric. The SOM is additionally employed to identify the local dynamical regime, and consequently implements a switching scheme that selects the best available model for the applied control. SOM based linear models are used to predict the response to a larger family of control sequences which are clustered on the representative prototypes. The control sequence which corresponds to the prediction that best satisfies the requirements on the system output is applied as the external driving signal.

Motter, Mark A.↗
DOE OSTI2017

Special Issue on Uncertainty Quantification in Multiscale System Design and Simulation

The importance of uncertainty has been recognized in various modeling, simulation, and analysis applications, where inherent assumptions and simplifications affect the accuracy of model predictions for physical phenomena. As model predictions are now heavily relied upon for simulation-based system design, which includes new materials, vehicles, mechanical and civil structures, and even new drugs, wrong model predictions could potentially cause catastrophic consequences. Therefore, uncertainty and associated risks due to model errors should be quantified to support robust systems engineering.

42 ENGINEERING↗
DOE OSTI2020

Predictive multiscale modeling for Unidirectional Carbon Fiber Reinforced Polymers

This paper presents a predictive multiscale modeling scheme for Unidirectional (UD) Carbon Fiber Reinforced Polymers (CFRP). A bottom-up modeling procedure is discussed for predicting the performance of UD structures. UD material responses are computed from high fidelity Representative Volume Elements (RVEs). A data-driven Reduced Order Modeling approach compresses RVEs into Reduced Order Models so material responses can be computed in a concurrent fashion along with the structural level simulation. The approach presented in this paper is validated against experimental data and is believed to provide design guidance for future fiber reinforced polymers development.

36 MATERIALS SCIENCE↗
NASA NTRS2020

Spatial validation reveals poor predictive performance of large-scale ecological mapping models

Mapping aboveground forest biomass is central for assessing the global carbon balance. However, current large-scale maps show strong disparities, despite good validation statistics of their underlying models. Here, we attribute this contradiction to a flaw in the validation methods, which ignore spatial autocorrelation (SAC) in data, leading to overoptimistic assessment of model predictive power. To illustrate this issue, we reproduce the approach of large-scale mapping studies using a massive forest inventory dataset of 11.8 million trees in central Africa to train and validate a random forest model based on multispectral and environmental variables. A standard nonspatial validation method suggests that the model predicts more than half of the forest biomass variation, while spatial validation methods accounting for SAC reveal quasi-null predictive power. This study underscores how a common practice in big data mapping studies shows an apparent high predictive power, even when predictors have poor relationships with the ecological variable of interest, thus possibly leading to erroneous maps and interpretations.

biomass↗
DOE OSTI2017

Development of a Mechanistic Model for Predicting Sliding Vapor Bubble Growth

A new mechanistic model for predicting the growth of sliding vapor bubble in subcooled boiling flows has been developed. This model employs a physical base that the fundamental mechanisms applied to the bubble growth at a nucleation site can also be applied to the growth of sliding bubble. The heat transfer mechanisms considered are microlayer evaporation, evaporation of superheated liquid, and condensation. Modifications were made to the physical assumptions/reasoning applied to the existing growth models to reflect the intrinsic physics associated with the growth of sliding bubble. The present model has been successfully validated against a broad set of subcooled flow boiling data generated by three separate research groups using different working fluids and heater surfaces. The physical dependency of bubble growth during sliding on the relevant flow boiling parameters (i.e., mass flux, wall superheat, and subcooling level) observed in these experiments was well reproduced by the present model.

42 ENGINEERING↗
NASA NTRS2013

Model Verification and Validation Concepts for a Probabilistic Fracture Assessment Model to Predict Cracking of Knife Edge Seals in the Space Shuttle Main Engine High Pressure Oxidizer

Physics-based models are routinely used to predict the performance of engineered systems to make decisions such as when to retire system components, how to extend the life of an aging system, or if a new design will be safe or available. Model verification and validation (V&V) is a process to establish credibility in model predictions. Ideally, carefully controlled validation experiments will be designed and performed to validate models or submodels. In reality, time and cost constraints limit experiments and even model development. This paper describes elements of model V&V during the development and application of a probabilistic fracture assessment model to predict cracking in space shuttle main engine high-pressure oxidizer turbopump knife-edge seals. The objective of this effort was to assess the probability of initiating and growing a crack to a specified failure length in specific flight units for different usage and inspection scenarios. The probabilistic fracture assessment model developed in this investigation combined a series of submodels describing the usage, temperature history, flutter tendencies, tooth stresses and numbers of cycles, fatigue cracking, nondestructive inspection, and finally the probability of failure. The analysis accounted for unit-to-unit variations in temperature, flutter limit state, flutter stress magnitude, and fatigue life properties. The investigation focused on the calculation of relative risk rather than absolute risk between the usage scenarios. Verification predictions were first performed for three units with known usage and cracking histories to establish credibility in the model predictions. Then, numerous predictions were performed for an assortment of operating units that had flown recently or that were projected for future flights. Calculations were performed using two NASA-developed software tools: NESSUS(Registered Trademark) for the probabilistic analysis, and NASGRO(Registered Trademark) for the fracture mechanics analysis. The goal of these predictions was to provide additional information to guide decisions on the potential of reusing existing and installed units prior to the new design certification.

Pai, Shantaram S.↗
DOE OSTI2024

Chemical composition based machine learning model to predict defect formation in additive manufacturing

With a goal of exploiting additive manufacturing to improve the manufacturing of existing reactor materials, we developed a chemical composition-based machine learning model to predict the printability of any given alloy in laser powder bed fusion (L-PBF) using experimental data from peer-reviewed literature. We defined printability as the ability to avoid defects like cracking, balling, porosity, and lack of fusion, that are caused by thermal stresses (during solidification or liquation), molten pool disintegration into disconnected small beads or lack of heat input respectively. Our models predict the tendency of balling defect formation and porosity percentage for a given composition, under a given set of processing conditions. To predict the likelihood of balling defect, three models: a random forest classifier, a gradient boost regressor and a neural network were trained on a dataset containing both traditional alloys and high entropy alloys. The neural network model showed the highest accuracy of 92.3 % in predicting the balling defect formation. A random forest regressor, gradient boost regressor and neural network were trained and tested on a dataset of various alloys to predict porosity. The random forest regressor showed the best predictions with an R 2 score of 0.97. The models also revealed the relative importance of the input descriptors on defect-formation tendency. Of particular significance was the identification of carbon as an important element in determining the occurrence of balling and percent porosity in alloys like steel, as well as being moderately important to the percentage porosity in other alloys as well as steel. Manganese was also identified as a key descriptor for the percentage of porosity in steel and other alloys. Manganese’s low thermal conductivity and consistent presence in the dataset is the likely cause for its contribution. Carbon’s role is attributable to its relatively high specific heat and high melting temperature. In conclusion, our model serves as a swift, chemistry-based tool to design experiments and find modified compositions better suited for additive manufacturing.

36 MATERIALS SCIENCE↗