Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Enhanced room-temperature mid-ultraviolet emission from AlGaN/AlN Stranski-Krastanov quantum dots

We report on the identification of an optimum deposited amount of AlGaN in AlGaN/AlN quantum dot (QD) superlattices grown by molecular-beam epitaxy, which grants maximum luminescence at room temperature by finding a compromise between the designs providing maximum internal quantum efficiency (60%) and maximum QD density (9.0 × 10{sup 11 }cm{sup −2}). The average Al composition in the QDs is estimated at 10.6% ± 0.8% by combining x-ray diffraction measurements with three-dimensional calculations of the strain distribution. The effect of the variation of the QD height/base-diameter ratio on the interband and intraband optical properties was explored by fitting the experimental data with three-dimensional calculations of the band diagram and quantum confined states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature midinfrared electroluminescence from InSb/InAs quantum dot light emitting diodes

Self-assembled InSb submonolayer quantum dots (QDs) in an InAs matrix have been grown by molecular beam epitaxy using Sb{sub 2} and As{sub 2} fluxes. The structures exhibit bright midinfrared photoluminescence up to room temperature. Intense room temperature electroluminescence with a peak at wavelength near 3.8 {mu}m was observed from p-i-n light emitting diode structures containing ten InSb submonolayer QD sheets inserted within the InAs active region.

36 MATERIALS SCIENCE↗

Geometry-driven modeling of electron localization in InAs/GaAs double quantum dots

The coupled electronic states in two-dimensional (2D) and three-dimensional (3D) double quantum dot (DQD) systems are investigated using a phenomenological model applied to InAs/GaAs heterostructures. The single-band k • p effective potential approach previously proposed by our group is employed to numerically calculate the energy spectrum and spatial localization of a single electron, serving as an indicator of the coupling strength within the binary system. For identical quantum dots (QDs) in a DQD, the electronic states exhibit ideal coherence. We systematically vary the DQD geometry and the strength of the confinement potential (via an applied electric field) to examine the effects of symmetry breaking and the sensitivity of electron localization in both identical and nearly identical DQDs. Our results show that coherence in DQDs is highly sensitive to these subtle variations. This sensitivity can be harnessed to detect changes in the surrounding environment, such as fluctuations in chemical or electrical properties that affect the DQD system.

electron localization↗

White-blue electroluminescence from a Si quantum dot hybrid light-emitting diode

A silicon (Si) quantum dot (QD)-based hybrid inorganic/organic light-emitting diode (LED) was fabricated via solution processing. This device exhibited white-blue electroluminescence at a low applied voltage of 6 V, with 78% of the effective emission obtained from the Si QDs. This hybrid LED produced current and optical power densities 280 and 350 times greater than those previously reported for such device. The superior performance of this hybrid device was obtained by both the prepared Si QDs and the optimized layer structure and thereby improving carrier migration through the hybrid LED and carrier recombination in the homogeneous Si QD layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoluminescence spectra of InAs quantum dots embedded in GaAs heterostructure

Self-assembled InAs/GaAs quantum dot (QD) heterostructures grown by solid state molecular beam epitaxy (MBE) were subjected to growth ripening pause of comparatively shorter durations (0-50s) at the growth temperature (520 Degree-Sign C). Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) studies indicate that the QD islands increase in size with the growth pause and correspondingly their density decreases. Photoluminescence (PL) studies were carried out on these QDs. The temperature dependence of the PL is studied and models to explain it are explored.

36 MATERIALS SCIENCE↗

Optical properties of individual site-controlled Ge quantum dots

We report photoluminescence (PL) experiments on individual SiGe quantum dots (QDs) that were epitaxially grown in a site-controlled fashion on pre-patterned Si(001) substrates. We demonstrate that the PL line-widths of single QDs decrease with excitation power to about 16 meV, a value that is much narrower than any of the previously reported PL signals in the SiGe/Si heterosystem. At low temperatures, the PL-intensity becomes limited by a 25 meV high potential-barrier between the QDs and the surrounding Ge wetting layer (WL). This barrier impedes QD filling from the WL which collects and traps most of the optically excited holes in this type-II heterosystem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light absorption in silicon quantum dots embedded in silica

The photon absorption in Si quantum dots (QDs) embedded in SiO{sub 2} has been systematically investigated by varying several parameters of the QD synthesis. Plasma-enhanced chemical vapor deposition (PECVD) or magnetron cosputtering (MS) have been used to deposit, upon quartz substrates, single layer, or multilayer structures of Si-rich-SiO{sub 2} (SRO) with different Si content (43-46 at. %). SRO samples have been annealed for 1 h in the 450-1250 deg. C range and characterized by optical absorption measurements, photoluminescence analysis, Rutherford backscattering spectrometry and x-ray Photoelectron Spectroscopy. After annealing up to 900 deg. C SRO films grown by MS show a higher absorption coefficient and a lower optical bandgap (approx2.0 eV) in comparison with that of PECVD samples, due to the lower density of Si-Si bonds and to the presence of nitrogen in PECVD materials. By increasing the Si content a reduction in the optical bandgap has been recorded, pointing out the role of Si-Si bonds density in the absorption process in small amorphous Si QDs. Both the photon absorption probability and energy threshold in amorphous Si QDs are higher than in bulk amorphous Si, evidencing a quantum confinement effect. For temperatures higher than 900 deg. C both the materials show an increase in the optical bandgap due to the amorphous-crystalline transition of the Si QDs. Fixed the SRO stoichiometry, no difference in the optical bandgap trend of multilayer or single layer structures is evidenced. These data can be profitably used to better implement Si QDs for future PV technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Time resolved studies of proton irradiated quantum dots

The effects of proton irradiation on carrier dynamics were measured by time-resolved photoluminescence on InGaAs/GaAs quantum dot structures with different dot density and substrate orientation, as well as on InAlAs/AlGaAs quantum dots.

nanotechnology↗

Specific features of the epitaxial growth of narrow-gap InSb quantum dots on an InAs substrate

Arrays of coherent InSb quantum dots (QDs) have been fabricated by liquid-phase epitaxy on InAs substrates in the temperature range T = 420-450{sup o}C. The QDs with a density of (0.9-2) x 10{sup 10} cm{sup -2} were 3 nm high and 13 nm in diameter. A bimodal QD size distribution was observed, which was accounted for by a combined growth mechanism of these nanoobjects. Structural characteristics of a separate InSb QD formed on the InAs surface were studied for the first time by atomic-force and transmission electron microscopies. Moire fringes were observed for the first time for QDs in the InSb/InAs system, with the moire period of 3.5 nm corresponding to InSb QDs without an admixture of arsenic.

39↗

Silanization of Low-Temperature-Plasma Synthesized Silicon Quantum Dots for Production of a Tunable, Stable, Colloidal Solution

We present a method for grafting silanes onto low-temperature-plasma synthesized silicon quantum dots. The resulting solution of dots is characterized with Fourier transform infrared spectroscopy and transmission electron microscopy, and determined to be a colloidal suspension. The silane is attached at a single point on the quantum dot surface to avoid cross-linking and multilayer formation, and photoluminescence spectroscopy shows the colloidal suspension of dots is stable for over two months in air. The hydroxyl-terminated surfaces required for silanization are created by wet chemical etch, which can be used to tune the luminescence of the silicon dots in the green- to red-wavelength range. We find, however, that the wet etch cannot move the emission into the blue-wavelength range and discuss this observation in terms of the nature of etching process and origin of the emission. In addition, we discuss the photoluminescence quantum yield in the context of other passivation and synthetic techniques.

14 SOLAR ENERGY↗

Photoluminescence Study of Interdot Carrier Transfer on Strain-relaxed InAs Quantum Dots

Photoluminescence (PL) properties of the strain relaxed InAs quantum dots (QDs) are studied as a function of temperature from 10 to 300 K. Two groups of QDs induced by strain relaxation are observed in the PL spectra. The PL peak position of the relaxed (non-relaxed) QDs locates at a higher (lower) energy. TEM image prove QDs are distributed into two groups and indicate the QDs relax the strain by diffusing indium to GaAs. In the 120-200 K temperature range, there are abnormal temperature behaviors attributed to the carrier transfer from the relaxed to non-relaxed QDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interaction matrix element fluctuations in quantum dots

In the Coulomb blockade regime of a ballistic quantum dot, the distribution of conductance peak spacings is well known to be incorrectly predicted by a single-particle picture; instead, matrix element fluctuations of the residual electronic interaction need to be taken into account. In the normalized random-wave model, valid in the semiclassical limit where the number of electrons in the dot becomes large, we obtain analytic expressions for the fluctuations of two-body and one-body matrix elements. However, these fluctuations may be too small to explain low-temperature experimental data. We have examined matrix element fluctuations in realistic chaotic geometries, and shown that at energies of experimental interest these fluctuations generically exceed by a factor of about 3-4 the predictions of the random wave model. Even larger fluctuations occur in geometries with a mixed chaotic-regular phase space. These results may allow for much better agreement between the Hartree-Fock picture and experiment. Among other findings, we show that the distribution of interaction matrix elements is strongly non-Gaussian in the parameter range of experimental interest, even in the random wave model. We also find that the enhanced fluctuations in realistic geometries cannot be computed using a leading-order semiclassical approach, but may be understood in terms of short-time dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge tuning in [111] grown GaAs droplet quantum dots

We demonstrate charge tuning in strain free GaAs/AlGaAs quantum dots (QDs) grown by droplet epitaxy on a GaAs(111)A substrate. Application of a bias voltage allows the controlled charging of the QDs from −3|e| to +2|e|. The resulting changes in QD emission energy and exciton fine-structure are recorded in micro-photoluminescence experiments at T = 4 K. We uncover the existence of excited valence and conduction states, in addition to the s-shell-like ground state. We record a second series of emission lines about 25 meV above the charged exciton emission coming from excited charged excitons. For these excited interband transitions, a negative diamagnetic shift of large amplitude is uncovered in longitudinal magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of electrospray ion-beam-deposited CdSe/ZnS quantum dot thin films from a colloidal solution

Colloidal semiconductor quantum dot (QD) nanocrystals can be deposited in the form of inorganic thin films using the ion beam direct deposition method. To simultaneously preserve the nanocrystal configuration and remove the organics derived from the ligand and solvent, the authors used an electrospray technique and an ion beam technique. These techniques provided a soft-ionization process to obtain nanocrystalline ions and a collision process to attain a nonequilibrium state of the deposits, respectively. Because of the nature of the soft-ionization process, the electrospray phenomenon resulted in various forms of QD ions that depended on the preparation of the colloidal solution source and spraying conditions. The authors concentrated on finding operational conditions of the system that deposited thin films with reduced organics concentrations by examining the correlation between fast Fourier transform infrared absorption spectroscopy and photoluminescence intensity. The morphology of the deposited films was observed using an atomic force microscope.

36 MATERIALS SCIENCE↗

Optical stability of shape-engineered InAs/InAlGaAs quantum dots

The optical properties of shape-engineered InAs/InAlGaAs quantum dots (SEQDs) were investigated by temperature-dependent and excitation-power-dependent photoluminescence (PL) spectroscopy and compared with those of the conventionally grown InAs QDs (CQDs). The emission wavelength of the InAs/InAlGaAs SEQDs at 240 K was redshifted by 18 nm from that at 15 K, which was relatively smaller than that of the InAs CQDs (97 nm). The PL yield at 240 K was reduced to 1/86 and 1/65 of that measured at 15 K for the InAs CQDs and the InAs/InAlGaAs SEQDs, respectively. The emission wavelength for the InAs CQDs was blueshifted by 76 nm with increasing excitation power from 0.56 to 188 mW, compared to only by 7 nm for the InAs/InAlGaAs SEQDs. These results indicated that the InAs/InAlGaAs SEQDs were optically more stable than the InAs CQDs mainly due to the enhancement of the carrier confinement in the vertical direction and the improvement in the size uniformity.

36 MATERIALS SCIENCE↗

Examining Forster Energy Transfer for Semiconductor Nanocrystaline Quantum Dot Donors and Acceptors

Excitation energy transfer involving semiconductor quantum dots (QDs) has received increased attention in recent years because their properties, such as high photostability and size-tunable optical properties, have made QDs attractive as Forster resonant energy transfer (FRET) probes or sensors. An intriguing question in FRET studies involving QDs has been whether the dipole approximation, commonly used to predict the electronic coupling, is sufficiently accurate. Accurate estimates of electronic couplings between two 3.9 nm CdSe QDs and between a QD and a chlorophyll molecule are reported. These calculations are based on transition densities obtained from atomistic semiempirical calculations and time-dependent density functional theory for the QD and the chlorophyll, respectively. In contrast to the case of donor-acceptor molecules, where the dipole approximation breaks down at length scales comparable to the molecular dimensions, we find that the dipole approximation works surprisingly well when donor and/or acceptor is a spherical QD, even at contact donor-acceptor separations. Our conclusions provide support for the use of QDs as FRET probes for accurate distance measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-shaped and Y-shaped Andreev resonance profiles in a superconducting quantum dot

The quasi-bound states of a superconducting quantum dot that is weakly coupled to a normal metal appear as resonances in the Andreev reflection probability, measured via the differential conductance. We study the evolution of these Andreev resonances when an external parameter (such as the magnetic field or gate voltage) is varied, using a random-matrix model for the N × N scattering matrix. We contrast the two ensembles with broken time-reversal symmetry, in the presence or absence of spin-rotation symmetry (class C or D). The poles of the scattering matrix in the complex plane, encoding the center and width of the resonance, are repelled from the imaginary axis in class C. In class D, in contrast, a number ∝ √N of the poles has zero real part. The corresponding Andreev resonances are pinned to the middle of the gap and produce a zero-bias conductance peak that does not split over a range of parameter values (Y-shaped profile), unlike the usual conductance peaks that merge and then immediately split (X-shaped profile)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stable Cadmium-Free Quantum Dot Optical Down-Converters for Solid State Lighting

Quantum dots (QDs) have been used in commercial solid-state lighting (SSL) applications to improve the energy efficiency of light generation at warm color temperatures. By increasing the amount of QDs used in each product, further energy savings are possible; however, traditional QDs contain cadmium, which has regulatory limits on its concentration in consumer products. As described within this final technical report, we have established that heavy-metal free QDs made from indium phosphide (InP) exhibit highly efficient emission at the temperatures and fluxes relevant to SSL. However, the maintenance of this emission is compromised during long term operation due to QD oxidation. We have identified multiple methods to slow the oxidation rate, which has improved the operational stability of these materials more than 200 times longer than at the project start. Beyond these improvements, heavy-metal free QDs require a further hundred-fold increase in stability to enable use in mid-power SSL and a ten-fold increase in stability to enable use in diffuse SSL applications. The outcomes of this project demonstrate feasibility for the use of heavy-metal free QDs in commercial SSL applications with potential use in diffuse SSL applications in the near term (1-2 years) pending market need.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗