Search NASA⌕ Search

SEARCH · Search NASA

Results for “random sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Molecular organization in MAPLE-deposited conjugated polymer thin films and the implications for carrier transport characteristics

The morphological structure of poly(3-hexylthiophene) (P3HT) thin films deposited by both Matrix Assisted Pulsed Laser Evaporation (MAPLE) and solution spin-casting methods are investigated. We found that the MAPLE samples possessed a higher degree of disorder, with random orientations of polymer crystallites along the side-chain stacking, π-π stacking, and conjugated backbone directions. Furthermore, the average molecular orientations and relative degrees of crystallinity of MAPLE-deposited polymer films are insensitive to the chemistries of the substrates onto which they were deposited; this is in stark contrast to the films prepared by the conventional spin-casting technique. In spite of the seemingly unfavorable molecular orientations and the highly disordered morphologies, the in-plane charge carrier transport characteristics of the MAPLE samples are comparable to those of spin-cast samples, exhibiting similar transport activation energies (56 meV versus 54 meV) to those reported in the literature for high mobility polymers.

36 MATERIALS SCIENCE↗

Highly Textured BaTiO 3 via Templated Grain Growth and Resulting Polarization Reversal Dynamics

Samples of bulk textured polycrystalline BaTiO 3 ceramics were fabricated using a templated grain growth ( TGG ) approach in order to investigate effects of polycrystallinity and texture related to ferroelectric domain reversal under high‐power drive conditions. Barium titanate platelets were formed via two‐step topochemical conversion of bismuth titanate platelets grown via molten salt synthesis, then aligned via tape casting within a matrix of fine BaTiO 3 powder. The coarse‐grained parts showed a high degree of crystallographic texture after sintering. Combined with ceramics of similar density and polycrystallinity, but random orientation and commercial single‐crystal specimens, this sample set enabled direct isolation of crystallographic texture and polycrystallinity as the primary variables for high‐power polarization reversal studies. These studies have also demonstrated a link between grain size and polarization reversal time that strongly suggests that grain boundaries serve effectively as nucleation sites during the ferroelectric switching process.

Meier, William↗

Estimation of distributions via multilevel Monte Carlo with stratified sampling

We design and implement a novel algorithm for computing a multilevel Monte Carlo (MLMC) estimator of the joint cumulative distribution function (CDF) of a vector-valued quantity of interest in problems with random input parameters and initial conditions. Our approach combines MLMC with stratified sampling of the input sample space by replacing standard Monte Carlo at each level with stratified Monte Carlo initialized with proportionally allocated samples. We show that the resulting stratified MLMC (sMLMC) algorithm is more efficient than its standard MLMC counterpart due to the additional variance reduction provided by the stratification of the random parameter's domain, especially at the coarsest levels. Additional computational cost savings are obtained by smoothing the indicator function with a Gaussian kernel, which proves to be an efficient and robust alternative to recently developed polynomial-based techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graph Sampling for Visual Analytics

Effectively visualizing large graphs and capturing the statistical properties are two challenging tasks. To aid in these two tasks, many sampling approaches for graph simplification have been proposed, falling into three categories: node sampling, edge sampling, and traversal-based sampling. It is still unknown which approach is the best. We evaluate commonly used graph sampling methods through a combined visual and statistical comparison of graphs sampled at various rates. We conduct our evaluation on three graph models: random graphs, small-world graphs, and scale-free graphs. Initial results indicate that the effectiveness of a sampling method is dependent on the graph model, the size of the graph, and the desired statistical property. This benchmark study can be used as a guideline in choosing the appropriate method for a particular graph sampling task, and the results presented can be incorporated into graph visualization and analysis tools.

97 MATHEMATICS AND COMPUTING↗

Studies in astronomical time series analysis: Modeling random processes in the time domain

Random process models phased in the time domain are used to analyze astrophysical time series data produced by random processes. A moving average (MA) model represents the data as a sequence of pulses occurring randomly in time, with random amplitudes. An autoregressive (AR) model represents the correlations in the process in terms of a linear function of past values. The best AR model is determined from sampled data and transformed to an MA for interpretation. The randomness of the pulse amplitudes is maximized by a FORTRAN algorithm which is relatively stable numerically. Results of test cases are given to study the effects of adding noise and of different distributions for the pulse amplitudes. A preliminary analysis of the optical light curve of the quasar 3C 273 is given.

Scargle, J. D.↗

Exploring the Connection Between Sampling Problems in Bayesian Inference and Statistical Mechanics

The Bayesian and statistical mechanical communities often share the same objective in their work - estimating and integrating probability distribution functions (pdfs) describing stochastic systems, models or processes. Frequently, these pdfs are complex functions of random variables exhibiting multiple, well separated local minima. Conventional strategies for sampling such pdfs are inefficient, sometimes leading to an apparent non-ergodic behavior. Several recently developed techniques for handling this problem have been successfully applied in statistical mechanics. In the multicanonical and Wang-Landau Monte Carlo (MC) methods, the correct pdfs are recovered from uniform sampling of the parameter space by iteratively establishing proper weighting factors connecting these distributions. Trivial generalizations allow for sampling from any chosen pdf. The closely related transition matrix method relies on estimating transition probabilities between different states. All these methods proved to generate estimates of pdfs with high statistical accuracy. In another MC technique, parallel tempering, several random walks, each corresponding to a different value of a parameter (e.g. "temperature"), are generated and occasionally exchanged using the Metropolis criterion. This method can be considered as a statistically correct version of simulated annealing. An alternative approach is to represent the set of independent variables as a Hamiltonian system. Considerab!e progress has been made in understanding how to ensure that the system obeys the equipartition theorem or, equivalently, that coupling between the variables is correctly described. Then a host of techniques developed for dynamical systems can be used. Among them, probably the most powerful is the Adaptive Biasing Force method, in which thermodynamic integration and biased sampling are combined to yield very efficient estimates of pdfs. The third class of methods deals with transitions between states described by rate constants. These problems are isomorphic with chemical kinetics problems. Recently, several efficient techniques for this purpose have been developed based on the approach originally proposed by Gillespie. Although the utility of the techniques mentioned above for Bayesian problems has not been determined, further research along these lines is warranted

Pohorille, Andrew↗

Correcting for fibre assignment incompleteness in the DESI Bright Galaxy Survey

The Dark Energy Spectroscopic Instrument (DESI) Bright Galaxy Survey (BGS) will be a survey of bright, low-redshift galaxies, which is planned to cover an area of ~14000 square degrees in three passes. Each pass will cover the survey area with ~2000 pointings, each of area ~8 square degrees. The BGS is currently proposed to consist of a bright high priority sample to an r-band magnitude limit r ~ 19.5, with a fainter low priority sample to r ~ 20. The geometry of the DESI fibre positioners in the focal plane of the telescope affects the completeness of the survey and has a non-trivial impact on clustering measurements. Using a BGS mock catalogue, we demonstrate that completeness due to fibre assignment primarily depends on the surface density of galaxies. Completeness is high (>95 per cent) in low-density regions, but very low (<10 per cent) in the centre of massive clusters. We apply the pair inverse probability (PIP) weighting correction to clustering measurements from a BGS mock which has been through the fibre assignment algorithm. This method is only unbiased if it is possible to observe every galaxy pair. To expedite this, we randomly promote a small fraction of the fainter sample to be high priority, and dither the set of tile positions by a small angle. We show that inverse pair weighting combined with angular upweighting provides an unbiased correction to galaxy clustering measurements for the complete three pass survey, and also after one pass, which is highly incomplete.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimating Uncertainty in GPCP and TRMM Multi-Satellite Precipitation Estimates

One of the high-priority problems in satellite precipitation estimation is developing algorithms for estimating the errors in precipitation retrievals by individual sensors and subsequent multi-satellite combinations. Classically, we distinguish between "random" and "bias" errors, which do and do not, respectively average to zero over a "big enough" time/space sample. The current operational GPCP and TRMM multi-satellite algorithms are nearly unique in estimating random error for the monthly precipitation estimates from individual sensor systems (including gauge), following Huffman, and then making multi-sensor combinations. No routinely operational global precipitation produces estimates of bias error. Subsequently, a similar scheme has been followed to provide random error estimates for the Multi-satellite Precipitation Analysis (MPA) being computed in real time and after real time for TRMM. The Huffman algorithm for random error is briefly reviewed, including a discussion of the limitations imposed on the algorithm by standard monthly precipitation data sets. Starting from a very simple theoretical treatment of the histogram of precipitation samples in a month, an equation is developed that depends on the estimated average precipitation rate for the month, the number of samples in the month, and two constants. The constants are set separately for each source of precipitation estimate (such as "raingauge") by calibration at selected ground sites. We discuss recent work validating the random error estimates to highlight the successes and limitations of this first-generation approach. We then consider what information is needed from the individual sensor algorithms to facilitate additional accuracy in the estimation of random errors across the time/space span of climate regimes which a global estimation system must handle. In addition, the thorny issue of estimating bias is raised. Finally, the role of error estimates (and the qualitative errors!) in creating combinations of precipitation estimates from different individual sensors is discussed. This issue is particularly important when fine scales in space and time are being considered, say the 0.25 x 0.25-deg 3-hourly estimates in the MPA.

Huffman, G. J.↗

Information efficiency of line-scan imaging mechanisms

Information theory is used to formulate a single figure of merit for assessing the performance of line-scan imaging systems as a function of their spatial response (PSF or MTF), sensitivity, and sampling and quantization intervals and of the statistical properties of a random radiance field. Information density and efficiency (i.e., the ratio of information density to data density) tend to be optimum when the MTF and sampling passband of the imaging system are matched to the Wiener spectrum of the radiance field. Computational results for the statistical properties of natural radiance fields and the responses of common line-scan imaging mechanisms indicate that information density and efficiency are not strongly sensitive to variations in typical statistical properties of the radiance field and that the best practically realizable performance is approached when the sampling intervals are approximately 0.5-0.7 times the equivalent diameter of the PSF.

Huck, F. O.↗

Entropy-based closure for probabilistic learning on manifolds

In a recent paper, the authors proposed a general methodology for probabilistic learning on manifolds. The method was used to generate numerical samples that are statistically consistent with an existing dataset construed as a realization from a non-Gaussian random vector. The manifold structure is learned using diffusion manifolds and the statistical sample generation is accomplished using a projected Itˆo stochastic differential equation. This probabilistic learning approach has been extended to polynomial chaos representation of databases on manifolds and to probabilistic nonconvex constrained optimization with a fixed budget of function evaluations. The methodology introduces an isotropic-diffusion kernel with hyperparameter ". Currently, " is more or less arbitrarily chosen. In this paper, we propose a selection criterion for identifying an optimal value of ", based on a maximum entropy argument. The result is a comprehensive, closed, probabilistic model for characterizing data sets with hidden constraints. This entropy argument ensures that out of all possible models, this is the one that is the most uncertain beyond any specified constraints, which is selected. Applications are presented for several databases.

97 MATHEMATICS AND COMPUTING↗

Effect of Atomic-Scale Randomness on the Optical Polarization of Semiconductor Quantum Dots

Alloy systems such as Ga{sub 1-x}In{sub x}As consist of different random assignments {sigma} of the Ga and In atoms onto the cation sublattice; each configuration {sigma} having, in principle, distinct physical properties. In infinitely large bulk samples different {sigma}'s get self-averaged. However, in finite quantum dots (QDs) ({le} 10{sup 5} atoms), self-averaging of such configuration {sigma} may not be complete, so single-dot spectroscopy might observe atomic-scale alloy randomness effects. We examine theoretically the effect of such atomic-scale alloy randomness on the fine structure-splitting (FSS) of the multiexciton observed via the polarization anisotropy of its components. We find that (i) The FSS of the neutral monoexciton {chi}{sup 0} changes by more than a factor of 7 with {sigma}. Thus, dots provide clear evidence for the effect of the atomic-scale alloy randomness on the optical properties. (ii) For multiexcitons, the effect of alloy randomness can be so large that the polarization of given emission lines in samples that differ only in random realizations can be dramatically different, so it cannot be said that given transitions have fixed polarization. (iii) Polarization is affected both by atomic-scale randomness and by possible geometric elongation of the QD in one direction. Because of different random realizations, even 50% QD base elongation in [100] direction gives the same polarization as in a geometrically symmetric dot. Thus, measured polarization cannot be used to determine QD elongation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Grand Canyon Ecological Forecasting: Using NASA Earth Observations to Monitor and Model Juniper Woodland Mortality in Grand Canyon National Park

Significant die-offs of the drought tolerant species Utah juniper (Juniperus osteosperma) and one-seeded juniper (Juniperus monosperma) have been observed throughout central and northern Arizona, including Grand Canyon National Park (GCNP). As climate models project rising temperatures and continuous drought, land managers are concerned for the future of juniper in and around GCNP. This project incorporated data from Landsat 8 Operational Land Imager (OLI), the Shuttle Radar Topography Mission (SRTM), and ocular samples of the National Agriculture Imagery Program (NAIP) in a random forest model to identify patterns between characteristics of the landscape and locations of juniper woodland mortality and to model areas subject to vulnerability. This study found no significant correlation between ocularly sampled juniper tree mortality and remotely sensed environmental variables used thus, accurately modeling mortality vulnerability in the future was not feasible. The ocular sampling, however, allows the partners at the GCNP’s Science & Resource Management Division to better understand areas of juniper tree woodland mortality and the relative amount of mortality in the park. Additionally, the areas of juniper tree mortality found in this project provide the partners with guidance for future field sampling.

Scarlet Jackson↗

Dipole strength in {sup 139}La below the neutron-separation energy

The {gamma}-ray strength function is an important input quantity for the determination of the photoreaction rate and the neutron capture rate for astrophysics as well as for nuclear technologies. To test model predictions, the photoabsorption cross section of {sup 139}La up to the neutron-separation energy was measured using bremsstrahlung produced at the electron accelerator ELBE of Forschungszentrum Dresden-Rossendorf with an electron beam of 11.5 MeV kinetic energy. The experimental data were analyzed by applying Monte Carlo simulations of {gamma}-ray cascades to obtain the intensities of the ground-state transitions and their branching ratios. We found a significant enhancement of electric dipole strength in the energy range from 6 to 10 MeV that may be related with a pygmy dipole resonance. The present data are combined with photoneutron cross sections for {sup 139}La and compared with results of calculations on the basis of a quasiparticle-random-phase approximation using an instantaneous-shape sampling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2022 Central California Travel Study

# 2022 Central California Travel Study The 2022 Central California Travel Study collected demographic and travel pattern information to better understand household travel behavior in the state’s San Joaquin Valley region. ## Data Collection Agency The Fresno Council of Governments conducted the household travel study in collaboration with metropolitan planning organizations in Fresno, Kern, Kings, Madera, Merced, San Joaquin, Stanislaus, and Tulare counties in California. ## Survey Methodology The two-part study consisted of a survey and a travel diary. The survey gathered data on household demographic composition and typical travel behaviors. The travel diary gathered individual travel data during a specified travel period for all members of a given household. ## Travel Diary Methods Households with smartphones were encouraged to complete their travel diaries using the rMove smartphone app for up to seven consecutive days. Households without smartphones or those unwilling to participate via smartphone completed their travel diaries online (using the web-version of rMove) or by calling the survey call center. These households reported travel for one day (Tuesday, Wednesday, or Thursday). ## Recruitment Sampling Methods The majority of the recruitment was conducted via address-based sampling, a type of probability sampling, with a focus on reaching county-level targets in collaboration with metropolitan planning organizations in the region. Supplemental sampling methods, primarily non-probability, were employed during all waves of data collection to improve survey representation. The supplemental sample included targeted outreach to hard-to-survey populations via transit rider email lists; local housing authorities; Nichols Research, a California-based market research firm; and the Ipsos™ KnowledgePanel, an online random probability panel. See the documentation for more information about sampling and weighting. ## Survey Records, Data, and Documentation In total, 7,406 households completed 19,084 surveys representing 150,012 trips across 42,567 person-days.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗