Search NASA⌕ Search

SEARCH · Search NASA

Results for “rapid development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

A SPATIOTEMPORAL APPROACH FOR HIGH RESOLUTION TRAFFIC FLOW IMPUTATION

Along with the rapid development of Intelligent Transportation Systems (ITS), traffic data collection technologies have been evolving dramatically. The emergence of innovative data collection technologies such as Remote Traffic Microwave Sensor (RTMS), Bluetooth sensor, GPS-based Floating Car method, automated license plate recognition (ALPR) (1), etc., creates an explosion of traffic data, which brings transportation engineering into the new era of Big Data. However, despite the advance of technologies, the missing data issue is still inevitable and has posed great challenges for research such as traffic forecasting, real-time incident detection and management, dynamic route guidance, and massive evacuation optimization, because the degree of success of these endeavors depends on the timely availability of relatively complete and reasonably accurate traffic data. A thorough literature review suggests most current imputation models, if not all, focus largely on the temporal nature of the traffic data and fail to consider the fact that traffic stream characteristics at a certain location are closely related to those at neighboring locations and utilize these correlations for data imputation. To this end, this paper presents a Kriging based spatiotemporal data imputation approach that is able to fully utilize the spatiotemporal information underlying in traffic data. Imputation performance of the proposed approach was tested using simulated scenarios and achieved stable imputation accuracy. Moreover, the proposed Kriging imputation model is more flexible compared to current models.

Han, Lee↗

Investigating the Electromechanical Response Mechanism of Ionic Block Copolymers

One of the rapidly developing frontiers in research and engineering applications is focused on the rational design of materials that have targeted functionalities and tunable responses to external stimuli. Such materials stand to revolutionize how structural components are designed for applications including flexible electronics, biomimetic devices, nanofluidics, as well as separation chemistry. A chief obstacle to achieving this capability is the lack of a fundamental understanding of how chemical structure and morphology give rise to macromolecular properties. With this in mind, our research explores how polymer structure, counterion species, and film morphology affects the electromechanical response of materials when exposed to external electric fields. While the actuating behavior of materials such as Nafion have been commonly investigated, the literature lacks a thorough understanding of how the aforementioned factors drive the electrostatic and mechanical stresses that result in material deformation. Our research has investigated how thin film morphology and counterion species affect the electromechanical response of diblock copolymers containing charged imidazolium groups using neutron reflectometry. The sensitivity of neutron reflectometry to scattering length density as well as sub-nanometer changes in thickness make it an ideal tool for investigating polymer and counterion mobility under applied fields. To this end, we have designed a vacuum chamber capable of applying electric fields to thin films during reflectometry measurements. This chamber was used at the liquids reflectometer (BL-4B) at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) to explore the electromechanical response of ionic block copolymers.

Dugger, Jason W.↗

End-System Aware Peak Link Utilization Transport for Big Data Transfer over Dedicated Connections

High-performance networks provisioning 10/40-Gbps dedicated channels have been rapidly developed andincreasingly deployed to support big data transfers on the order of terabytes or petabytes in large-scale network-intensiveapplications. However, end users have not seen corresponding increase in application throughput mainly because traditional end-to-end transport methods are not optimized for such connections. New congestion or flow control mechanisms are desirable to meet the challenges brought to transport protocol design by dedicated connections. The advent and proliferation of multi-core processors make it now possible to improve application throughput by providing multiple processing and network resources to a single data transfer. Based on the existing PLUT method, we proposed a new dynamic buffer management scheme and an automatic parallelism tuning mechanism to achieve the maximal bottleneck rate. The performance superiority of PLUT is justified by the experimental results collected over a local 10Gbps dedicated connection.

Rao, Nageswara↗

Optimal Control for Battery Storage Using Nonlinear Models

Battery storage system (BSS) becomes increasingly popular for grid applications due to the advance in battery and power electronics technologies as well as the growing need of flexibility and reserve from power systems with rapidly developed renewable generation. Successful assessment and deployment of BSS requires optimizing its operation and therefore maximizing the potential benefits. Although there exist studies that develop optimal control for evaluation or operational scheduling of BSS, modeling of charging/discharging operation and the corresponding impacts on state-of-charge (SOC) is over simplified in these methods. This paper develops an optimal control for BSS evaluation and operational scheduling using a general nonlinear model that expresses the change of SOC as a function of charging/discharging power and SOC level. The proposed method is compared with a typical existing method through a real-world energy storage evaluation project to show the significance of the proposed method.

battery, energy storage system, dynamic programmin↗

254th ACS Meeting, Energy and Fuels Symposium “The Ammonia Economy” – Synthesis, Utilization & Nitrogen Reduction [Guest Editorial]

In late August, the day before the exciting solar eclipse, the Ammonia Economy symposium was held as part of the Energy and Fuels Division of the American Chemical Society (ACS) National Meeting in Washington D.C. This marks the third gathering of Ammonia related research since 2015 at the national level ACS conference. This year in addition to the important focus on chemistries for the utilization of ammonia, the rapidly developing field of homogeneous catalysts and biological processes for nitrogen fixation was included as a major theme.

Mock, Michael T.↗

ACCELERATED CREEP TEST (ACT) QUALIFICATION OF CREEP RESISTANCE USING THE WCS CONSTITUTIVE MODEL AND STEPPED ISOSTRESS METHOD (SSM)

In this study, a qualification of accelerated creep-resistance of Inconel 718 is assessed using the novel Wilshire-Cano-Stewart (WCS) model and the stepped isostress method (SSM) and predictions are made to conventional creep data. Conventional creep testing (CCT) is a long-term continuous process, in fact, the ASME B&PV III requires that 10,000+ hours of experiments must be conducted to each heat for materials employed in boilers and/or pressure vessel components. This process is costly and not feasible for rapid development of new materials. As an alternative, accelerated creep testing techniques have been developed to reduce the time needed to characterize the creep resistance of materials. Most techniques are based upon the time-temperature-stress superposition principle (TTSSP) that predicts minimum-creep-strain-rate (MCSR) and stress-rupture behaviors but lack the ability to predict creep deformation and consider deformation mechanisms that occur for experiments of longer duration. The stepped isostress method (SSM) has been developed which enables the prediction of creep deformation response as well as reduce the time needed for qualification of materials. The SSM approach has been successful for polymer, polymeric composites, and recently has been introduced for metals. In this study, the WCS constitutive model, calibrated to SSM test data, qualifies the creep resistance of Inconel 718 at 750°C and predictions are compared to CCT data. The WCS model has proven to make long-term predictions for stress-rupture, minimum-creep-strain-rate (MCSR), creep deformation, and damage in metallic materials. The SSM varies stress levels after time interval adding damage to the material, which can be tracked by the WCS model. The SSM data is calibrated into the model and the WCS model generates realistic predictions of stress-rupture, MSCR, damage, and creep deformation. The calibrated material constants are used to generate predictions of stress-rupture and are post-audit validated using the National Institute of Material Science (NIMS) database. Similarly, the MCSR predictions are compared from previous studies. Finally the creep deformation predictions are compared with real data and is determined that the results are well in between the expected boundaries. Material characterization and mechanical properties can be determined at a faster rate and with a more cost-effective method. This is beneficial for multiple applications such as in additive manufacturing, composites, spacecraft, and Industrial Gas Turbines (IGT).

36 MATERIALS SCIENCE↗

Recent advances in nano-scale spatial resolution x-ray microscopy instrumentation at NSLS-II

X-ray microscopy is an invaluable and powerful characterization tool applied in many scientific fields, such as materials science, biology, environmental science, and energy research. In recent years it has been driven by rapid developments of novel technologies and systems resulting in imaging experiments elucidating structural inhomogeneities and chemical reactions at the nanometer scale. To obtain high spatial resolution comprehensive chemical and structural information, an X-ray microscope must be equipped with adequate capabilities and allow for simultaneous acquisition of multiple datasets. In recent years, a number of X-ray microscopes have been designed, constructed, and commissioned at NSLS-II. Here we provide an overview of the microscopy instrumentation development program at NSLS-II and specifically focus on the multilayer Laue lens-based hard X-ray nanoprobe optimized for ~10 nm spatial resolution imaging, its current status, and future upgrades along with recently constructed Kirkpatrick-Baez based scanning microscope designed for ~100 nm spatial resolution experiments.

36 MATERIALS SCIENCE↗

Snowmass2021 Cosmic Frontier White Paper: Dark Matter Physics from Halo Measurements

The non-linear process of cosmic structure formation produces gravitationally bound overdensities of dark matter known as halos. The abundances, density profiles, ellipticities, and spins of these halos can be tied to the underlying fundamental particle physics that governs dark matter at microscopic scales. Thus, macroscopic measurements of dark matter halos offer a unique opportunity to determine the underlying properties of dark matter across the vast landscape of dark matter theories. This white paper summarizes the ongoing rapid development of theoretical and experimental methods, as well as new opportunities, to use dark matter halo measurements as a pillar of dark matter physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Recovery of valuable materials from waste liquid crystal display panel

Associated with the rapid development of the information and electronic industry, liquid crystal displays (LCDs) have been increasingly sold as displays. However, during the discarding at their end-of-life stage, significant environmental hazards, impacts on health and a loss of resources may occur, if the scraps are not managed in an appropriate way. In order to improve the efficiency of the recovery of valuable materials from waste LCDs panel in an environmentally sound manner, this study presents a combined recycling technology process on the basis of manual dismantling and chemical treatment of LCDs. Three key processes of this technology have been studied, including the separation of LCD polarizing film by thermal shock method the removal of liquid crystals between the glass substrates by the ultrasonic cleaning, and the recovery of indium metal from glass by dissolution. The results show that valuable materials (e.g. indium) and harmful substances (e.g. liquid crystals) could be efficiently recovered or separated through above-mentioned combined technology. The optimal conditions are: (1) the peak temperature of thermal shock to separate polarizing film, ranges from 230 to 240 deg. C, where pyrolysis could be avoided; (2) the ultrasonic-assisted cleaning was most efficient at a frequency of 40 KHz (P = 40 W) and the exposure of the substrate to industrial detergents for 10 min; and (3) indium separation from glass in a mix of concentrated hydrochloric acid at 38% and nitric acid at 69% (HCl:HNO{sub 3}:H{sub 2}O = 45:5:50, volume ratio). The indium separation process was conducted with an exposure time of 30 min at a constant temperature of 60 deg. C.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Large-Amplitude Motion Platform: A New Ocean Simulator Can Help Technologies Succeed

Offshore renewable energy technologies - like wave energy devices, wind turbines, floating solar panels, and hybrid systems - can help decarbonize our power grids as well as offshore activities like international shipping and seafood farming. But it's not always easy to build technologies hearty enough to operate in a powerful ocean environment. And subjecting promising prototypes to real ocean waves can be an expensive, time-consuming, and risky way to get these technologies ready for the high seas. Now, with the National Renewable Energy Laboratory's (NREL's) new testing platform, called the large-amplitude motion platform (or LAMP for short), our experts can replicate powerful ocean waves in a low-risk laboratory setting. The LAMP, coupled with NREL's diverse array of testing instrumentation, can help technology developers rapidly hone their prototypes before embarking on a potentially costly and time-consuming ocean trial.

marine energy↗

An Overview of Public Domain Tools for Measuring the Sustainability of Environmental Remediation - 12060

The application of sustainability principles to the investigation and remediation of contaminated sites is an area of rapid development within the environmental profession, with new business practices, tools, and performance standards for identifying, evaluating, and managing the 'collateral' impacts of cleanup projects to the environment, economy and society coming from many organizations. Guidelines, frameworks, and standards of practice for 'green and sustainable remediation' (GSR) have been released and are under development by the Sustainable Remediation Forum (SURF), the American Society for Testing Materials (ASTM), the Interstate Technology Roundtable Commission (ITRC) and other organizations in the U.S. and internationally. In response to Executive Orders from the President, Federal government agencies have developed policies, procedures and guidelines for evaluating and reporting the sustainability of their environmental restoration projects. Private sector companies in the petroleum, utility, manufacturing, defense, and other sectors are developing their own corporate GSR programs to improve day-to-day management of contaminated sites and to support external reporting as part of their corporate social responsibility (CSR) efforts. The explosion of mandates, policy, procedures and guidance raises the question of how to determine whether a remediation technology or cleanup approach is green and/or sustainable. The environmental profession has responded to this question by designing, developing and deploying a wide array of tools, calculators, and databases that enable regulatory agencies, site managers and environmental professionals to calculate the collateral impacts of their remediation projects in the environmental, social, and economic domains. Many of these tools are proprietary ones developed by environmental engineering/consulting firms for use in their consulting engagements and/or tailored specifically to meet the needs of their clients. When it comes to the public domain, Federal government agencies are spearheading the development of software tools to measure and report emissions of air pollutants (e.g., carbon dioxide, other greenhouse gases, criteria air pollutants); consumption of energy, water and natural resources; accident and safety risks; project costs and other economic metrics. Most of the tools developed for the Government are available to environmental practitioners without charge, so they are growing in usage and popularity. The key features and metrics calculated by the available public-domain tools for measuring the sustainability of environmental remediation projects share some commonalities but there are differences amongst the tools. The SiteWise{sup TM} sustainability tool developed for the Navy and US Army will be compared with the Sustainable Remediation Tool (SRT{sup TM}) developed for the US Air Force (USAF). In addition, the USAF's Clean Solar and Wind Energy in Environmental Programs (CleanSWEEP), a soon-to-be-released tool for evaluating the economic feasibility of utilizing renewal energy for powering remediation systems will be described in the paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Modern sensitivity analysis - 15651

Sensitivity analysis has been applied to complex models, such as performance assessment models, since at least the advent of computational tools to support such an approach to model evaluation. Initially, sensitivity analysis methods were applied to deterministic models and focused on changing one input variable at a time. Probabilistic modeling opened the door to evaluating changes in all input variables simultaneously. Standardized rank regression methods were primarily used in the last century to evaluate probabilistic models. These methods assume linearity in the rank response of the model to the inputs. At the very least this assumes monotonicity in the response, but for the most part the response needs to be near-linear. This is highly unlikely for performance assessment models that are based on differential equations, multiplication and division of variables that are usually not correlated, and conservatism that is not well understood. There are better statistical methods for evaluating highly non-linear and dynamic probabilistic models. Some of these methods were founded in the data mining industry. This century has seen a rapid development of the internet that led directly to the development of data mining techniques for massive databases. Although the goals were different, these techniques can be adapted to sensitivity analysis for complex probabilistic models, which, also, form large, or even massive, databases. These modern sensitivity analysis procedures assess the importance of every explanatory variable (input parameters) used in a probabilistic model. In practice, this means that for each endpoint of interest, every explanatory variable in the model is associated with a quantitative measure of importance. For a given explanatory variable, the importance value depends on the endpoint of interest. This global approach to sensitivity analysis allows all levels of interactions to be evaluated, so that the variation in the output can be measured at every level of possible interaction. The effects are collected together during sensitivity analysis processing, and then separated out to attribute the overall contribution of each input parameter to the model output. These global sensitivity analysis procedures have the ability to characterize non-linear and non-monotonic relationships between explanatory variables and endpoints of interest. This is critically important because of the need to characterize complex interactions among multiple explanatory variables in PA models that often have non-linear and non-monotonic effects. The options for sensitivity analysis are fully explored, including an evaluation of several methods when applying them to a well-known complex non-linear non-monotonic model. The results clearly demonstrate the relative benefit of using data mining methods over simple statistical approaches such as standardized rank regression. (authors)

97 MATHEMATICS AND COMPUTING↗

Decommissioning of NPP in Europe? Strategies, Risks and Opportunities - 16124

This paper offers a strategic perspective on the rapidly developing European nuclear decommissioning scene, with a particular focus on the German market. We will identify a number of strategic themes that might be interesting to international companies practicing in decommissioning. The market size and valuation has received attention in several studies published in the last three years due to political concerns surrounding the funding of decommissioning. This paper will focus mainly on the decommissioning and decontamination (D and D) of Nuclear Power Plants (NPPs), commercially operated reactors generating electricity for power grids. There is also a substantial developing market also in D and D of fuel cycle facilities, research reactors and military production sites. However, they represent a rather different technical and financial challenge so will not be explored here. Further, we also restrict our geographic scope to European Union members and Germany in particular, to ensure our observations offer specific value. Our principal contention is that the German national industry holds too little capacity to fully undertake its own decommissioning program; leading to a conclusion that the European program as a whole will require significant support from international companies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Physics and Environmental Assessments for a Heavy-Water Moderated, Molten Uranium Reactor Concept

Previous papers describe a method for controlling a thermal nuclear reactor by moderator displacement between the reactor core and the reflector. The low neutron loss and high control range of this method enable a design for a molten natural uranium fueled and cooled heavy water moderated reactor. The design is geometrically similar to CANDU (Canadian Deuterium Uranium) reactors but with fewer, larger, vertically oriented fuel tubes. The fuel tubes contain molten natural uranium as both the fuel and the coolant instead of fuel rods and water coolant. The large fuel tubes have a mixed spectrum which is largely thermal at the periphery of the tubes with a very hard spectrum in the large central region of the tube. This configuration provides a fast fission rate of around 15% (mostly of U-238) and an initial conversion ratio of around 1.15. It is a hypothetical reactor because it is unclear what materials could actually be used to fabricate the fuel tubes and other primary coolant plumbing. The molten uranium serves both as the fuel and the primary coolant and as such is continuously circulated through the fuel tubes in the reactor core, the primary heat exchange, and back to the the reactor core. This means that at any point in time all the fuel has the same isotopic configuration no matter where it is in the reactor or heat exchanger. Over time the isotopic configuration changes, but it changes uniformly for all the fuel. Uranium melts at 1135 deg. C, so a proposed temperature range for the circulating molten uranium is 1200 deg. C at the exit of the heat exchanger and entry to the core fuel tubes and 1400 deg. C at the exit from the core fuel tubes and the entry into the heat exchanger. The advantages of this design include: 1. Reduced nuclear proliferation concern because of natural uranium fuel. 2. High conversion ratio and large fuel mass provides 30 to 100 year fuel life. 3. No heavy metal waste because fissile content increases over the fuel life. 4. High output temperatures are suitable for high efficiency turbine generators. This assessment will examine three perspectives: reactor physics, regional grid management, and global resource utilization and impact. This assessment will examine three perspectives: reactor physics, regional grid management, and global resource utilization and impact. The proposed reactor type can generate much of the future CO{sub 2} emission free electric power demand with a low impact on total uranium required to be mined, zero heavy metal waste produced, zero enrichment capability required, and capacity (with thermal storage) to meet fluctuating demand. There are engineering issues to be addressed before such a reactor can be built, but thanks to the demand for high efficiency gas turbines and other high temperature applications, high temperature materials and technology are developing rapidly. An operating temperature of 1400 degrees C does not seem unreasonable in the near future. The implied advantages of this reactor type compared to other existing or proposed reactors suggest that further work on the issues raised would be well worthwhile. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

fuel cycle cost analysis of Th/U MOX fuel in a block-type HTR - 18619

With a rapid development of nuclear energy in these years, the supply of nuclear fuel is becoming more and more important. Thorium regains attention because of its abundant reserves and excellent physical properties. As a next generation reactor, the high temperature reactor (HTR) is a promising choice for thorium utilization because of its deeper burnup, harder spectrum and better inherent safety. Therefore, a 600 MWth 108-column modular high temperature reactor (MHR) core model with 20%UO{sub 2}-80%ThO{sub 2}; MOX fuel is adapted. A traditional two-step calculation scheme, lattice calculation then core calculation, is used to get the neutronic performance of equilibrium cycle including uranium enrichment and mass of fuel. Using these data, the fuel cycle cost of HTR can be calculated by the levelized lifetime cost method. In order to take into account the variation of unit price, a well-established, standard statistical analysis technique is used by Monte Carlo simulation, (thus, the probability distribution of fuel cycle cost can be obtained. Furthermore, sensitivity calculations are made to analyze the impact on the fuel cycle cost of variations in the unit prices for each fuel cycle component. The result shows that the most influential parameters are unit price of natural uranium, enrichment and discount rate. Finally a comparison of fuel cycle cost between 100%UO{sub 2} and 20%UO{sub 2}-80%ThO{sub 2} MOX fuel is made. The latter is 11% cheaper than the former. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Volatility Studies of Lanthanide Hexafluoroacetylacetone Chelates

Nuclear forensics has become very important to the field of nuclear security, where there is considerable interest in developing rapid separations of radionuclides and isotopes. Although prevention and detection form the foundation of nuclear security science, in the unfortunate event of detonation of a nuclear device, the fallout debris can be analyzed for signature isotopes that may provide evidence on the origin and type of nuclear materials. This is of considerable political importance to many governing bodies and this information is desired in a timely manner. One method of analysis is the rapid gas phase separation of rare earth metals from other components of the debris via isothermal thermochromatography. Lanthanides cover a portion of the fission product curve with varying yields dependent on a number of variables (e.g. neutron energy, fissile parent, etc), motivating the chromatographic separation of these elements. In previous work, 1,1,1,5,5,5 - hexafluoroacetylacetone (hfac) has been shown to produce volatile complexes with lanthanides. Thermochromatography is a gas phase separation method that utilizes temperature gradients on a column to vary adsorption location or constant column temperatures to vary retention time. The adsorption time of a compound on a column, i.e. retention time, is dependent on the thermodynamics, most notably the adsorption enthalpy. Studies of heavy metals have generated empirical correlations between adsorption enthalpy on a quartz column and sublimation enthalpy of the solid material. Thermogravimetric analysis (TGA) is useful in the characterization of the thermodynamics of materials, especially the sublimation enthalpy. Many methods analyze weight loss curves as a function of a constant heating rate. Another method introduced by Ashcroft analyzes weight loss curves over isothermal heating regions. Work presented here focuses on the determination of the sublimation enthalpies of thirteen lanthanide hfac complexes via the latter method. Additionally, there is investigation into the degradation of the compound via constant heating TGA up to higher temperatures. This provides information on the onset and end-set temperatures of degradation stages, as well as the peak temperature at which total sublimation occurs. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Simulation with on the fly Doppler Broadening treatment in RMC

In conventional transient analysis, thermal hydraulics calculations are generally coupled to deterministic neutronics solvers. Due to the limited accuracy of deterministic methods and the rapid development of computer power, Monte Carlo neutronics calculations have received increasing attention nowadays. One of challenges for Monte Carlo methods coupled to thermal hydraulics calculations is the temperature dependent cross sections. Taking the detailed temperature distribution feedback into account, each nuclide may be in a large range of temperatures, pre-generated libraries at every temperature point are no longer applicable owing to unaffordable memory footprint. Different solutions have been proposed to deal with this problem. TMS, accounting for Doppler broadening effect by the explicit treatment of thermal motion, was used to model fast transients in Serpent 2. Stochastic mixing, using two sets of libraries for each nuclide and mixing them to get the correct temperature, was used in transient analysis by Sjenitzer and Hoogenboom. Besides, there are other on the fly Doppler broadening methods being developed, including series expansion of cross sections, multipole representation, different integration algorithms based on Doppler broadening equation. In this paper, on the fly Doppler broadening treatment based on integration algorithms was applied to transient calculation in Reactor Monte Carlo code RMC . In the following section, the integration algorithms implemented and dynamic simulation method in RMC is briefly introduced. Finally, a pure physical transient fuel assembly model was chosen for numerical validation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

On-the-fly Doppler Broadening with Probability Table Interpolation for Unresolved Resonance Region in RMC

With the rapid development of computational power and parallel algorithms, Monte Carlo method has been widely investigated and used in neutron transport simulations due to its advantages in geometry modelling and usage of continuous energy point-wise cross sections. Nowadays the road has been paved to couple Monte Carlo codes with thermal-hydraulics codes to make multi-physics calculations. One of the most important aspects of thermal-hydraulics feedback is the detailed temperature distribution, which demands temperature dependent cross sections in neutron transport simulations. The conventional pre-generated cross section libraries at each temperature point are no longer feasible for detailed temperature distributions because of tremendous memory footprint. Hence, different on-the-fly Doppler broadening methods have been proposed for resolved resonance energy region and thermal energy region, such as the interpolation, regress model fitting, multipole representation (MPR), target motion sampling (TMS) and different integration algorithms based on Doppler broadening equation. Compared to resolved resonance energy region and thermal energy region, the representation of cross sections in unresolved resonance region is slightly different. As a result of the limitation of experiment measurements, the overlapped resonances cannot be distinguished from each other and the statistic average resonance parameters are given in the evaluated nuclear data file. In early applications, infinite-dilute pointwise cross sections were obtained from average parameters and were directly used in neutron simulations. However, it was proven that these infinite-dilute pointwise cross sections cannot capture the energy self-shielding effect, thus leading to an overestimate of reaction rates and usually an underestimate of k{sub eff} owing to the increased absorption rates and increased scattering probability to energy below unresolved resonance region where the capture-to-fission ratio is typically higher. This phenomenon is of great importance especially for problems where there is a considerable flux in unresolved resonance region. Then the probability table method was put forward by Levitt to take energy self-shielding effect into account, which provides probability distribution function of cross sections in unresolved resonance region instead of specific cross section values. The probability distribution function is presented in the form of tables and the mean values are equal to the infinite dilution cross sections. To obtain the temperature dependent cross sections in unresolved energy region, there are two different methods. One is to calculate cross sections directly from average resonance parameters and their statistical distributions , which is effective and precise but time-consuming. The other is to interpolate between pre-generated probability table files, which is much more efficient. In this paper, on-the-fly Doppler broadening of cross sections in unresolved resonance regions based on probability tables interpolation was implemented in RMC codes as a supplement to on-the-fly Doppler broadening for resolved resonance energy region and thermal region, which is based on the integration of Doppler broadening equation. The results of criticality calculation and depletion calculation show that on-the-fly Doppler broadening for the whole energy region is accurate and efficient. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗