Search NASA⌕ Search

SEARCH · Search NASA

Results for “stack sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

IS THE OBSERVED HIGH-FREQUENCY RADIO LUMINOSITY DISTRIBUTION OF QSOs BIMODAL?

The distribution of QSO radio luminosities has long been debated in the literature. Some argue that it is a bimodal distribution, implying that there are two separate QSO populations (normally referred to as 'radio-loud' and 'radio-quiet'), while others claim it forms a more continuous distribution characteristic of a single population. We use deep observations at 20 GHz to investigate whether the distribution is bimodal at high radio frequencies. Carrying out this study at high radio frequencies has an advantage over previous studies as the radio emission comes predominantly from the core of the active galactic nucleus, and hence probes the most recent activity. Studies carried out at lower frequencies are dominated by the large-scale lobes where the emission is built up over longer timescales (10{sup 7}-10{sup 8} yr), thereby confusing the sample. Our sample comprises 874 X-ray-selected QSOs that were observed as part of the 6dF Galaxy Survey. Of these, 40% were detected down to a 3{sigma} detection limit of 0.2-0.5 mJy. No evidence of bimodality is seen in either the 20 GHz luminosity distribution or in the distribution of the R{sub 20} parameter: the ratio of the radio to optical luminosities traditionally used to classify objects as being either radio-loud or radio-quiet. Previous results have claimed that at low radio luminosities, star formation processes can dominate the radio emission observed in QSOs. We attempt to investigate these claims by stacking the undetected sources at 20 GHz and discuss the limitations in carrying out this analysis. However, if the radio emission was solely due to star formation processes, we calculate that this corresponds to star formation rates ranging from {approx}10 M{sub Sun} yr{sup -1} to {approx}2300 M{sub Sun} yr{sup -1}.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of molecular ordering on electrical and friction properties of omega-(trans-4-stilbene)alkylthiol self-assembled monolayers on Au (111)

The electrical and friction properties of omega-(trans-4-stilbene)alkylthiol self-assembled monolayers (SAMs) on Au(111) were investigated using atomic force microscopy (AFM) and near edge x-ray absorption fine structure spectroscopy (NEXAFS). The sample surface was uniformly covered with a molecular film consisting of very small grains. Well-ordered and flat monolayer islands were formed after the sample was heated in nitrogen at 120 oC for 1 h. While lattice resolved AFM images revealed a crystalline phase in the islands, the area between islands showed no order. The islands exhibit substantial reduction (50percent) in friction, supporting the existence of good ordering. NEXAFS measurements revealed an average upright molecular orientation in the film, both before and after heating, with a narrower tilt-angle distribution for the heated fim. Conductance-AFM measurements revealed a two orders of magnitude higher conductivity on the ordered islands than on the disordered phase. We propose that the conductance enhancement is a result of a better pi-pi stacking between the trans-stilbene molecular units as a result of improved ordering in islands.

36 MATERIALS SCIENCE↗

Combined electron backscatter diffraction and cathodoluminescence measurements on CuInS{sub 2}/Mo/glass stacks and CuInS{sub 2} thin-film solar cells

Electron backscatter diffraction (EBSD) and cathodoluminescence (CL) measurements in a scanning electron microscope were performed on cross sections of CuInS{sub 2} thin films and ZnO/CdS/CuInS{sub 2}/Mo/glass thin-film solar cells. The CuInS{sub 2} layers analyzed for the present study were grown by a rapid thermal process. The regions of the CuInS{sub 2} layers emitting high CL intensity of band-band luminescence are situated near the top surface (or close to the interface with ZnO/CdS). This can be attributed to an enhanced crystal quality of the thin films in this region. The phenomenon may be related to the recrystallization via solid-state reactions with Cu{sub x}S phases, which is assumed to run from the top to the bottom of the growing CuInS{sub 2} layer. The distribution of CL intensities is independent of the sample temperature, the acceleration voltage of the electron beam, and of whether or not the ZnO/CdS window layers are present. When comparing CL images and EBSD maps on identical sample positions, pronounced intragrain CL contrast is found for individual grains. Also, it is shown that at random grain boundaries, the decreases in CL intensities are substantially larger than at {Sigma}3 grain boundaries.

36 MATERIALS SCIENCE↗

The use of tethered satellites for the collection of cosmic dust and the sampling of man made orbital debris far from the space station

The use of a tethered subsatellite employed downward into the earth's upper atmosphere to an altitude of about 110 km above the earth would eliminate the orbital contamination problem while at the same time affording a measure of atmospheric braking to reduce the velocities of many particles to where they may be captured intact or nearly so with properly designed collectors. The same technique could also be used to monitor the flux of all types of man-made orbital debris out to a distance of more than a hundred kilometers in any direction from the space station. In this way the build up of any debris belt orbiting earth could be determined. The actual collecting elements used for both purposes could be of several different materials and designs so as to optimize the collection of different types of particles with different densities. Stacks of foils, films, plastics, and foams, as well as simple capture cells would be mounted in clusters around the outside of a tethered satellite and protected by iris covers until the tethered had been fully deployed. If the orientation history of the satellite were known the direction of the incoming material could be infered. A chief advantage in deploying such tethered collectors from the Space Station instead of from the shuttle is the ability to maintain deployment of the tether for days instead of hours resulting in much greater yields of intact particles and impact debris.

Corso, G. J.↗

Transient-Liquid-Phase Bonding of H230 Ni-Based Alloy Using Ni-P Interlayer: Microstructure and Mechanical Properties

Transient-liquid-phase bonding using Ni-P as an interlayer has been developed for H230 Ni-Cr-W solid-solution-strengthened Ni-based alloy. Two process parameters—composition of the interlayer and bonding time—have been varied to optimize the mechanical properties. H230 has been bonded into two sets of stacks (set I and II) for 8 and 4 hours using Ni-12P and Ni-6P interlayer, respectively, (wt pct) at 1423 K (1150 °C) and 12.7 MPa. The microstructure of both the stacks has three distinct regions—the joint centerline which showed the presence of pores, an isothermally solidified zone (ISZ) which did not have any carbide precipitates and base H230. Transmission electron microscopy and atom probe tomography showed a uniform microstructure, and an absence of any deleterious phases at the joint and in ISZ. Set I and set II had a yield strength of 76 and 86 pct of that of the H230 sheet, tested at 1023 K (750 °C). Here, the measured elongation at fracture was negligible, but the fracture surfaces revealed a ductile cup-and-cone-type fracture occurring through the ISZ/joint region. Examination of broken tensile samples revealed that the plastic strain was constrained to within one joint region through which fracture occurred.

14 SOLAR ENERGY↗

Network design for quantifying urban CO<sub>2</sub> emissions: assessing trade-offs between precision and network density

The majority of anthropogenic CO 2 emissions are attributable to urban areas. While the emissions from urban electricity generation often occur in locations remote from consumption, many of the other emissions occur within the city limits. Evaluating the effectiveness of strategies for controlling these emissions depends on our ability to observe urban CO 2 emissions and attribute them to specific activities. Cost-effective strategies for doing so have yet to be described. Here we characterize the ability of a prototype measurement network, modeled after the Berkeley Atmospheric CO 2 Observation Network (BEACO 2 N) in California's Bay Area, in combination with an inverse model based on the coupled Weather Research and Forecasting/Stochastic Time-Inverted Lagrangian Transport (WRF-STILT) to improve our understanding of urban emissions. The pseudo-measurement network includes 34 sites at roughly 2 km spacing covering an area of roughly 400 km 2 . The model uses an hourly 1 × 1 km 2 emission inventory and 1 × 1 km 2 meteorological calculations. We perform an ensemble of Bayesian atmospheric inversions to sample the combined effects of uncertainties of the pseudo-measurements and the model. We vary the estimates of the combined uncertainty of the pseudo-observations and model over a range of 20 to 0.005 ppm and vary the number of sites from 1 to 34. We use these inversions to develop statistical models that estimate the efficacy of the combined model–observing system in reducing uncertainty in CO 2 emissions. We examine uncertainty in estimated CO 2 fluxes on the urban scale, as well as for sources embedded within the city such as a line source (e.g., a highway) or a point source (e.g., emissions from the stacks of small industrial facilities). Using our inversion framework, we find that a dense network with moderate precision is the preferred setup for estimating area, line, and point sources from a combined uncertainty and cost perspective. The dense network considered here (modeled after the BEACO 2 N network with an assumed mismatch error of 1 ppm at an hourly temporal resolution) could estimate weekly CO 2 emissions from an urban region with less than 5 % error, given our characterization of the combined observation and model uncertainty.

54 ENVIRONMENTAL SCIENCES↗

Ordered Mesoporous CMK-5 Carbon with Ultra-Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Ordered mesoporous CMK-5 carbons with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2, 3-di-hydroxynaphtalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)2.6H2O] solution in isopropanol added to the carbon-silica nanocomposites prior to thermal treatments. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM) and in situ electron diffraction X-ray spectroscopy (EDX). While TG revealed carbon contents lower than 30 wt%, nitrogen adsorption provided information about homogeneity of carbon thin film deposited onto mesopore walls of ordered silica templates, SBA-15. The templates, carbon-silica nanocomposites and carbon inverse replicas with nickel nanoparticles exhibited uniform pores, high surface areas and large pore volumes. Graphitic carbon was identified by the presence of a characteristic G band on Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD.The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles were uniform in size, ~3nm, and were homogeneously dispersed within ordered tubular carbon walls. A few larger clusters of nickel, ~60nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles were largely composed of Ni with traces of NiO. Similar nanoparticles dispersions have been reported only for Ni-containing multi-walled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbons possessed larger Ni/NiO nanoparticles within CMK-3 nanostructure.

36 MATERIALS SCIENCE↗

Electron microscopy investigation of the microstructure of unsupported Ni-Mo-W sulfide

An exploration was made on structure and active sites of the unsupported Ni-Mo-W sulfide hydrodesulphurization catalyst prepared by a thiosalt decomposition method. More insights into the nanocomposite structure were provided by introducing the concept of average curvature of Mo(W)S{sub 2} and establishing a new structure model. The defects of cross and mixed stacks, steps along c-axis, expansion of (002) interplanar spacing and mixing structure of Mo(W)/Ni sulfides were investigated using advanced electron microscopy. All these defects in Mo(W) sulfides are closely correlated with increasing active sites of unsupported Ni-Mo-W sulfide catalyst. - Graphical Abstract: From the top schematic of unsupported Ni-Mo-W sulfide, the MoS{sub 2}, WS{sub 2}, or Mo{sub x}W{sub 1-x}S{sub 2} are surrounded by the dispersed Ni sulfide, which make the formation of nanocomposite phases possible. For the bottom colorized high-resolution transmission electron microscopy image with 3D rotation, the variation in sample thickness leads to a varying representation of the contrast of the Ni-Mo-W sulfide sheet, ... Research Highlights: {yields} Rich microstructural features of unsupported Ni-Mo-W sulfide catalyst were revealed. {yields} Curvature of HDS catalyst was firstly proposed, also illustrative for other catalysts. {yields} Insights into the nano-composite were gained from its new structure model.

36 MATERIALS SCIENCE↗

The Tynode: A new vacuum electron multiplier

By placing, in vacuum, a stack of transmission dynodes (tynodes) on top of a CMOS pixel chip, a single free electron detector could be made with outstanding performance in terms of spatial and time resolution. The essential object is the tynode: an ultra thin membrane, which emits, at the impact of an energetic electron on one side, a multiple of electrons at the other side. The electron yields of tynodes have been calculated by means of GEANT-4 Monte Carlo simulations, applying special low-energy extensions. The results are in line with another simulation based on a continuous charge-diffusion model. By means of Micro Electro Mechanical System (MEMS) technology, tynodes and test samples have been realized. The secondary electron yield of several samples has been measured in three different setups. Finally, several possibilities to improve the yield are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The size evolution of star-forming galaxies since z ∼ 7 using ZFOURGE

For the first time, we present the size evolution of a mass-complete (log(M{sub *}/M{sub ⊙}) > 10) sample of star-forming galaxies over redshifts z = 1–7, selected from the FourStar Galaxy Evolution Survey. Observed H-band sizes are measured from the Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey (CANDELS) Hubble Space Telescope (HST)/F160W imaging. Distributions of individual galaxy masses and sizes illustrate that a clear mass−size relation exists up to z ∼ 7. At z ∼ 7, we find that the average galaxy size from the mass−size relation is more compact at a fixed mass of log(M{sub *}/M{sub ⊙}) = 10.1, with r{sub 1/2,maj}=1.02±0.29 kpc, than at lower redshifts. This is consistent with our results from stacking the same CANDELS HST/F160W imaging, when we correct for galaxy position angle alignment. We find that the size evolution of star-forming galaxies is well fit by a power law of the form r{sub e}=7.07(1+z){sup −0.89} kpc, which is consistent with previous works for normal star-formers at 1 < z < 4. In order to compare our slope with those derived Lyman break galaxy studies, we correct for different IMFs and methodology and find a slope of −0.97 ± 0.02, which is shallower than that reported for the evolution of Lyman break galaxies (LBGs) at z > 4 (r{sub e}∝(1+z){sup −1.2±0.06}). Therefore, we conclude the LBGs likely represent a subset of highly star-forming galaxies that exhibit rapid size growth at z > 4.

79 ASTRONOMY AND ASTROPHYSICS↗

A mesoscale 3D model of irradiated concrete informed via a 2.5 U-Net semantic segmentation

The concrete biological shield in light-water reactors is exposed to neutron and gamma irradiation, which deteriorates the concrete’s mechanical properties in the long term. To assess the irradiation-induced damage, predictive mechanical models are developed and used in parallel with the characterization of irradiated concrete samples. Realistic 3D simulation domains can drastically improve a model’s prediction. In this work, we utilized x-ray computed tomography (XCT) data of a concrete specimen to reconstruct its 3D microstructure. The XCT data shows low contrast between the concrete’s aggregates and cement paste, resulting in poor image segmentation when using traditional unsupervised techniques. To address this issue, we developed and trained a 2.5D U-Net model on only 24 pre-labeled XCT layers to segment 651 layers of the XCT data. The overall F1-score of the model is approximately 96%. Then, we created a 3D finite element (FE) mesh based on the stack of segmented images. The FE model contains radiation-induced expansion, damage, and creep. The constitutive equations are adapted to each phase (aggregates and cement paste). Here, we simulated the effects of neutron irradiation in the concrete specimen as well as the specimen’s mechanical response to uniaxial compression. Finally, model validation was performed using experimental data on similar concrete specimens in the literature.

2.5D U-Net↗

Reliable wet-chemical cleaning of natively oxidized high-efficiency Cu(In,Ga)Se{sub 2} thin-film solar cell absorbers

Currently, Cu-containing chalcopyrite-based solar cells provide the highest conversion efficiencies among all thin-film photovoltaic (PV) technologies. They have reached efficiency values above 20%, the same performance level as multi-crystalline silicon-wafer technology that dominates the commercial PV market. Chalcopyrite thin-film heterostructures consist of a layer stack with a variety of interfaces between different materials. It is the chalcopyrite/buffer region (forming the p-n junction), which is of crucial importance and therefore frequently investigated using surface and interface science tools, such as photoelectron spectroscopy and scanning probe microscopy. To ensure comparability and validity of the results, a general preparation guide for “realistic” surfaces of polycrystalline chalcopyrite thin films is highly desirable. We present results on wet-chemical cleaning procedures of polycrystalline Cu(In{sub 1-x}Ga{sub x})Se{sub 2} thin films with an average x = [Ga]/([In] + [Ga]) = 0.29, which were exposed to ambient conditions for different times. The hence natively oxidized sample surfaces were etched in KCN- or NH{sub 3}-based aqueous solutions. By x-ray photoelectron spectroscopy, we find that the KCN treatment results in a chemical surface structure which is – apart from a slight change in surface composition – identical to a pristine as-received sample surface. Additionally, we discover a different oxidation behavior of In and Ga, in agreement with thermodynamic reference data, and we find indications for the segregation and removal of copper selenide surface phases from the polycrystalline material.

14 SOLAR ENERGY↗

The application of macroscopic flakes for Fe-6.5%Si bulk magnetics with superior magnetic properties

Silicon steel is the most popular crystalline soft magnetic material for motor and transformer applications. The material must be in thin thickness to reduce the eddy current loss. Conventional thin steel sheet manufacturing process starts with cast slab, followed by a series of hot/cold roll process. For transformer, thin sheet is wrapped to form the core; for motor, the sheet is stamped, coated, heat treated, and stacked to form stator/rotor. This process requires the steel to possess sufficient ductility. For Si steel, increasing Si content will improve its electrical and magnetic properties, but it will also lead to embrittlement with 3.5% Si as the limit for the conventional manufacturing processes. Despite poor mechanical properties, high Si steel, especially the one with 6.5% Si, is gaining more attention due to its lower iron loss, higher permeability, and near zero magnetostriction. To address the brittleness problem of the 6.5% Si steel, we developed a novel process, using rapid solidification to prepare thin flakes with high ductility, then using hot press to consolidate the flakes into near net shape bulk sample. The obtained Fe-6.5%Si sample with 0.2 mm thickness exhibits an iron loss of 7.2 W/kg at 400Hz and magnetic flux density of 1 Tesla, and a maximum permeability of 28,400. In addition, various coating materials and processes were investigated as inter-flake insulators for their effect on reducing the eddy current losses for thicker configuration.

Fe-6.5%Si Steel↗

W/TaC/SiC sandwich stack for high temperature applications

High-temperature stability of the tungsten/tantalum carbide/silicon carbide (W/TaC/SiC) system was examined and compared to the tungsten/silicon carbide (W/SiC) system. Interfacial reactions, surface morphology, and roughness evolutions on thermal annealing at 1000 °C were systematically investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). For the W/SiC system, WC, W 2 C and W 5 Si 3 phases were observed due to severe chemical reaction after 24 h annealing, which led to an inhomogeneous surface structure with several large craters and small pores, thereby increasing surface roughness greatly. On the other hand, there was no tungsten silicide and/or carbide formation upon annealing with a TaC diffusion barrier. The surface structure remained nearly unchanged, and small changes in surface roughness with annealing time, which could be due to the growth of W grains, were noted. Furthermore, both the as-deposited and the 24 h annealed W/TaC/SiC samples presented an excellent interfacial bonding with a dense uniform interface. The results indicate that TaC is a promising diffusion barrier in the W/SiC system for high temperature applications.

36 MATERIALS SCIENCE↗

Synthesis, crystal and electronic structures and magnetic properties of Li{sub 2}SnMo{sub 3}O{sub 8}: A novel reduced molybdenum oxide containing Mo{sub 3}O{sub 13} cluster units

Powder samples and single crystals of the quaternary oxide Li{sub 2}SnMo{sub 3}O{sub 8} were obtained by solid state reaction. The structure was determined by single-crystal X-ray diffraction. Li{sub 2}SnMo{sub 3}O{sub 8} crystallizes in the hexagonal space group P6{sub 3}mc with unit-cell parameters a=5.7720 (2) Å, c=10.3941 (3) Å and Z=2. Full-matrix least-squares refinement on F{sup 2} using 930 independent reflections for 31 refinable parameters results in R{sub 1}=0.0354 and wR{sub 2}=0.0643. The crystal structure consists of distorted hexagonal-close-packed oxygen layers with stacking sequence abac along [0 0 1] and that are held together by alternating lithium-tin and molybdenum layers. The Li{sup +} and Sn{sup 4+} ions occupy, respectively, tetrahedral and octahedral sites in the ratio 2:1. The Mo atoms occupy octahedral sites and form strongly bonded triangular clusters involving three MoO{sub 6} octahedra that are each shared along two edges, constituting a Mo{sub 3}O{sub 13} unit. Magnetic susceptibility measurements are in agreement with a spin-pairing of the eight d electrons per Mo{sub 3} cluster. The electronic structure of Li{sub 2}SnMo{sub 3}O{sub 8} is analyzed using periodic density functional calculations. - Graphical abstract: We present here the synthesis, the crystal and electronic structures, and the magnetic properties of the new quaternary compound containing Mo{sub 3}O{sub 13} units, Li{sub 2}SnMo{sub 3}O{sub 8}. - Highlights: • The new quaternary reduced molybdenum oxide containing Mo{sub 3} clusters, Li{sub 2}SnMo{sub 3}O{sub 8}, was synthesized by solid state reaction. • Eight electrons per Mo{sub 3} cluster. • Single-crystal X-ray study. • Magnetic susceptibility measurements. • Periodic density functional calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

THE DEEP SWIRE FIELD. II. 90 cm CONTINUUM OBSERVATIONS AND 20 cm-90 cm SPECTRA

We present one of the deepest radio continuum surveys to date at a wavelength {approx}>1 m. The observations were taken with the VLA at 324.5 MHz covering a region of the SWIRE Spitzer Legacy survey, centered at 10{sup h}46{sup m}00{sup s}, 59{sup 0}01'00'' (J2000). The data reduction and analysis are described and an electronic catalog of the sources detected above 5{sigma} is presented. We also discuss the observed angular size distribution for the sample. Using our deeper 20 cm survey of the same field, we calculate spectral indices for sources detected in both surveys. The spectral indices for 90 cm selected sources, defined as S {proportional_to} {nu}{sup -{alpha}}, shows a peak near 0.7 and only a few sources with very steep spectra, i.e., {alpha}{sup 90} {sub 20} > >1. Thus no large population of very steep spectrum {mu}Jy sources seems to exist down to the limit of our survey. For 20 cm selected sources, we find similar mean spectral indices for sources with S {sub 20} > 1 mJy. For weaker sources, below the detection limit for individual sources at 90 cm, we use stacking to study the radio spectra. We find that the spectral indices of small (<3'') 20 cm selected sources with S {sub 20} < 10 mJy have mean and median {alpha}{sup 90} {sub 20} {approx} 0.3-0.5. This is flatter than the spectral indices of the stronger source population. At the low end of the 20 cm survey, the spectral indices appear to be steepening again. We report log N-log S counts at 90 cm which show a flattening below 5 mJy. Given the median redshift of the population, z {approx} 1, the spectral flattening and the flattening of the log N-log S counts occur at radio luminosities normally associated with active galactic nuclei rather than with galaxies dominated by star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

GALAXY-MASS CORRELATIONS ON 10 Mpc SCALES IN THE DEEP LENS SURVEY

We examine the projected correlation of galaxies with mass from small scales (<few hundred kpc), where individual dark matter halos dominate, out to 15 Mpc, where correlated large-scale structure dominates. We investigate these profiles as a function of galaxy luminosity and redshift. Selecting 0.8 million galaxies in the Deep Lens Survey, we use photometric redshifts and stacked weak gravitational lensing shear tomography out to radial scales of 1 Degree-Sign from the centers of foreground galaxies. We detect correlated mass density from multiple halos and large-scale structure at radii larger than the virial radius and find the first observational evidence for growth in the galaxy-mass correlation on 10 Mpc scales with decreasing redshift and fixed range of luminosity. For a fixed range of redshift, we find a scaling of projected halo mass with rest-frame luminosity similar to previous studies at lower redshift. We control systematic errors in shape measurement and photometric redshift, enforce volume completeness through absolute magnitude cuts, and explore residual sample selection effects via simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

The outer stellar mass of massive galaxies: a simple tracer of halo mass with scatter comparable to richness and reduced projection effects

ABSTRACT Using the weak gravitational lensing data from the Hyper Suprime-Cam Subaru Strategic Program (HSC survey), we study the potential of different stellar mass estimates in tracing halo mass. We consider galaxies with log10(M⋆/M⊙) > 11.5 at 0.2 < z < 0.5 with carefully measured light profiles, and clusters from the redMaPPer and CAMIRA richness-based algorithms. We devise a method (the ‘Top-N test’) to evaluate the scatter in the halo mass–observable relation for different tracers, and to inter-compare halo mass proxies in four number density bins using stacked galaxy–galaxy lensing profiles. This test reveals three key findings. Stellar masses based on CModel photometry and aperture luminosity within R <30 kpc are poor proxies of halo mass. In contrast, the stellar mass of the outer envelope is an excellent halo mass proxy. The stellar mass within R = [50, 100] kpc, M⋆, [50, 100], has performance comparable to the state-of-the-art richness-based cluster finders at log10Mvir ≳ 14.0 and could be a better halo mass tracer at lower halo masses. Finally, using N-body simulations, we find that the lensing profiles of massive haloes selected by M⋆, [50, 100] are consistent with the expectation for a sample without projection or mis-centring effects. Richness-selected clusters, on the other hand, display an excess at R ∼ 1 Mpc in their lensing profiles, which may suggest a more significant impact from selection biases. These results suggest that M⋆-based tracers have distinct advantages in identifying massive haloes, which could open up new avenues for cluster cosmology. The codes and data used in this work can be found here:

79 ASTRONOMY AND ASTROPHYSICS↗