Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Spin density stabilization of local distortions induced by a monovacancy in δ -Pu

Density functional theory calculations elucidate crystallographic and electronic structural responses of the fcc delta phase of plutonium (δ-Pu) to point defects. Discussed are responses that vary from a defect exhibiting a local structural instability common in fcc metals to an unusual defect structure that mimics properties similar to the monoclinic α phase. In the prior case, the existence of a self-vacancy when ionic relaxation is allowed induces in the fcc lattice a local tetragonal instability in nearest-neighbor atoms, slight electronic charge increase, and a spin-density decrease. However, in the latter case, after ionic relaxation, the defect is not recognizable as the structure of a vacant site common to many simple fcc metals, but is a complex extended defect involving neighboring atoms to collectively exhibit loss of lattice symmetry through formation of short Pu-Pu bonds and associated narrow bands at the Fermi energy. Partial density of states (PDOS) indicates that these narrow bands form as spectral weighting from the less energetic 6d electronic states is shifted to the 5f electronic states by means of the spin density, which occupies states at the Fermi energy. Finally, the PDOS of a 5f system exhibiting narrow bands at the Fermi energy is associated with the formation of an unusual defect structure in the lattice.

36 MATERIALS SCIENCE↗

Data mining graphene: Correlative analysis of structure and electronic degrees of freedom in graphenic monolayers with defects

The link between changes in the material crystal structure and its mechanical, electronic, magnetic, and optical functionalities known as the structure-property relationship is the cornerstone of the contemporary materials science research. The recent advances in scanning transmission electron and scanning probe microscopies (STEM and SPM) have opened an unprecedented path towards examining the materials structure property relationships on the single-impurity and atomic-configuration levels. Lacking, however, are the statistics-based approaches for cross-correlation of structure and property variables obtained in different information channels of the STEM and SPM experiments. Here we have designed an approach based on a combination of sliding window Fast Fourier Transform, Pearson correlation matrix, linear and kernel canonical correlation, to study a relationship between lattice distortions and electron scattering from the SPM data on graphene with defects. Our analysis revealed that the strength of coupling to strain is altered between different scattering channels which can explain coexistence of several quasiparticle interference patterns in the nanoscale regions of interest. In addition, the application of the kernel functions allowed us extracting a non-linear component of the relationship between the lattice strain and scattering intensity in graphene. Lastly, the outlined approach can be further utilized to analyzing correlations in various multi-modal imaging techniques where the information of interest is spatially distributed and has usually a complex multidimensional nature.

36 MATERIALS SCIENCE↗

Computer Simulation Methods for Defect Configurations and Nanoscale Structures

This chapter will describe general computer simulation methods, including ab initio calculations, molecular dynamics and kinetic Monte-Carlo method, and their applications to the calculations of defect configurations in various materials (metals, ceramics and oxides) and the simulations of nanoscale structures due to ion-solid interactions. The multiscale theory, modeling, and simulation techniques (both time scale and space scale) will be emphasized, and the comparisons between computer simulation results and exprimental observations will be made.

36 MATERIALS SCIENCE↗

Extended Electronic Structure Inhomogeneity Created by Double Chain Layer Defects Surrounding Columnar Tracks in Heavy-Ion Irradiated YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}.

In YBa2Cu3O7-delta (YBCO), heavy-ion irradiation creates continuous amorphous tracks that are highly effective for vortex pinning. However, the electronic structure landscape of defects and consequently their vortex pinning roles are unclear. Here, we show double chain layer (DCL) defects which intersect the columnar tracks are additionally produced by high energy Pb ion irradiation in YBCO. The DCL defects are similar to 29 nm long, about three times the columnar defect diameter. The electronic structures of the DCL and columnar track defects were determined using atomic-resolution scanning transmission electron microscopy (STEM) and high resolution electron energy loss spectroscopy (EELS). Results show a decrease in the oxygen and copper content at the interface between the track and the YBCO matrix, resulting in interfacial strain. For the DCL defects, the STEM/EELS study revealed a localized electron doped CuO2 plane next to the DCL defect. The DCL defects thus further extend the electronic inhomogeneity into YBCO.

critical current↗

Structural and Chemical Evolution of the Layered Li-Excess Li x MnO 3 as a Function of Li Content from First-Principles Calculations

Li 2 MnO 3 is a critical component in the family of "Li-excess" materials, which are attracting attention as advanced cathode materials for Li-ion batteries. Here, first-principle calculations are presented to investigate the electrochemical activity and structural stability of stoichiometric Li x MnO 3 (0 ≤ x ≤ 2) as a function of Li content. The Li 2 MnO 3 structure is electrochemically activated above 4.5 V on delithiation and charge neutrality in the bulk of the material is mainly maintained by the oxidization of a portion of the oxygen ions from O 2- to O 1- . While oxygen vacancy formation is found to be thermodynamically favorable for x < 1, the activation barriers for O 2- and O 1- migration remain high throughout the Li composition range, impeding oxygen release from the bulk of the compound. Defect layered structures become thermodynamically favorable at lower Li content (x < 1), indicating a tendency towards the spinel-like structure transformation. A critical phase transformation path for forming nuclei of spinel-like domains within the matrix of the original layered structure is proposed. Formation of defect layered structures during the first charge is shown to manifest in a depression of the voltage profile on the first discharge, providing one possible explanation for the observed voltage fade of the Li-excess materials.

25 ENERGY STORAGE↗

Apodized structures for the integration of defect sites into photonic lattices

We introduce a versatile concept to optically induce photonic structures of local refractive index modulations as well as photonic lattices holding single defect sites. For a given structure, we develop a set of nondiffracting beams obtained by fractionalizing the corresponding spatial spectrum. By combining this set in a multiplexing procedure, we achieve an incoherent combination of all individual structures of the set resulting in a locally addressable refractive index manipulation. We exemplarily present experimental results for apodized, meaning locally confined index changes in a photorefractive crystal resembling a sixfold and a circular symmetric structure. By an additional multiplexing step, we furthermore create periodic photonic lattices featuring embedded defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of atomic structure on grain boundary-defect interactions in Cu

We investigate the role that the atomic structure of grain boundaries in Cu has in the interaction with point defects produced during irradiation. We focus on three aspects of defect-boundary interaction: how defects interact with pristine boundaries, how boundaries modify defect production during collision cascades, and how defects interact with damaged boundaries. We find that there are generic features common to most boundaries, including biased absorption of interstitials over vacancies during collision cascades and strong interactions with vacancies for interstitial-loaded boundaries. However, we find that the magnitude of these behaviors depends strongly on the atomic structure of the boundary. In particular, the biased absorption is much stronger for a high angle twist boundary and smallest for a more general twist-asymmetric tilt boundary. Further, the strength of defect-boundary interactions is also sensitive to the boundary structure. We conclude that the sink strength of grain boundaries for interacting with point defects is not an intrinsic property of the boundary but rather depends on the irradiation condition through the absorbed defect content at the boundary.

36 MATERIALS SCIENCE↗

Atomic Structural Features of Stacking Faults and Domain Connections in the Li- and Mn-Rich Cathode

Li- and Mn-rich layered oxides (LMRs), a class of earth-abundant materials for rechargeable Li-ion battery cathodes, crystallize into layered structures of two different symmetries: C2/m represented by Li 2 MnO 3 and R$\overline{3}$m represented by LiMn 0.5 Ni 0.5 O 2 . Fundamental questions about how the C2/m and R$\overline{3}$m domains spatially correlate within the same oxide grain and how the C2/m stacking faults arrange themselves when this happens still remain. Here, by using integrated differential phase contrast imaging in scanning transmission electron microscopy (STEM-iDPC), we probe the structural and compositional details of a prototypical, cobalt-free LMR material, 0.3Li 2 MnO 3 •0.7LiMn 0.5 Ni 0.5 O 2 (Li 1.13 Mn 0.57 Ni 0.3 O 2 ). The connection between the C2/m and R$\overline{3}$m domains is found to be abrupt, facilitated by the small lattice mismatch between the two structures. Stacking faults in the C2/m domains feature atomic plane shifting that accommodates stacking sequence changes, which explains why the stacking faults form in a random manner. Furthermore, a local disordering mechanism was identified to correlate with the C2/m stacking faults. Chemically, it is found that Ni coexists with Mn at the transition metal sites within the nominal Li 2 MnO 3 domain. As a result, this study demonstrates that STEM-iDPC is a very useful tool for capturing all the elements in a single image, revealing atomic details on domain connections and stacking faults in the LMRs.

Li-rich and Mn-rich oxides↗

Atomic-Scale Behavior of Radiation-Resistant ZnO under High-Energy Electron Bombardment

Understanding the atomic structure and defect characteristics of ZnO thin films is crucial for optimizing their electronic properties and performance in advanced applications. Here, we investigate the atomic structure and defect characteristics of atomic layer deposition (ALD)-grown ZnO thin films by using aberration-corrected scanning transmission electron microscopy (STEM). Atomic-resolution imaging identifies prevalent stacking faults, dipole disorder, and various grain boundary types, which are believed to influence the electronic properties of ZnO. Additionally, real-time electron beam exposure experiments demonstrate structural transformations, including crystal growth and surface rearrangements. These findings provide insights into the growth mechanisms of ALD ZnO under high-energy electron irradiation conditions, an important finding for the use of polycrystalline ZnO wide bandgap semiconductors in space-like conditions. In conclusion, our results underscore the capability of STEM in directly visualizing and quantifying atomic-scale defects and beam-induced transformations in radiation-resistant ZnO.

Defects↗

Lithiation-Induced Defect Engineering to Promote Oxygen Evolution Reaction

Exploring efficient electrocatalysts for oxygen evolution reaction (OER) is an urgent need to advance the development of sustainable energy conversion. Though defect engineering is considered an effective strategy to regulate catalyst activity for enhanced OER performance, the controllable synthesis of defective oxides electrocatalysts remains challenging. Here, oxygen defects are introduced into NiCo 2 O 4 nanorods by an electrochemical lithiation strategy. By tuning in situ lithiation potentials, the concentration of oxygen defects and the corresponding catalytic activity can be feasibly regulated. In addition, the relationship between the changes in the defect density and electronic structure and the lithiation cut-off voltages is revealed. The results show that NiCo 2 O 4 nanorods undertook intercalation and two-step conversion reaction, in which the lithiation-induced conversion reaction gives rise to a CoO@NiO-based structure with higher defect density and lower oxidation states. As a result, the defective CoO@NiO-based catalyst exhibits exceptional OER activity with an overpotential of 270 mV at 10 mA cm -2 , which is about 74 mV below the pristine nanomaterials. In conclusion, this research proposes a novel strategy to explore high-performance catalysts with structural stability and defect control.

36 MATERIALS SCIENCE↗

Probing the effect of intrinsic defects and dopants on the structural evolution and optical properties of ZnO nanocrystallites

Role of intrinsic defects and external impurities in modifying the structural and optical properties of ZnO nanostructures has been studied and discussed. ZnO nanocrystallites doped with B, N and S elements have been prepared by ultrasound assisted wet chemical method. Structural evolution of ZnO in presence of dopant ions has been studied by XRD and electron microscopic measurements. Elemental analysis like XPS has been carried out to ascertain the dopant configuration. A variation in crystallographic parameters and microstructure is found to be observed as impurity is incorporated into ZnO. This has been explained on the basis of the substitution of dopant at Zn{sup 2+} and O{sup −} sites rearranging the lattice. Optical absorption measurements and PL studies reflect a change in band gap of ZnO by impurity adsorption. Most of the cases, the band gap is found to be broadened which has been explained in the line of Moss-Burstein effect. The excitonic emission in ZnO is observed to blue shift supporting the above results and the defect emissions also get modified in terms of position and intensity. New PL bands observed have been assigned to the transitions related to the defect states present in the band gap of ZnO along with intrinsic defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles calculation of defect formation energies and electronic properties in stannate pyrochlores

The electronic structures and defect formation energies for a series of stannate pyrochlores Ln2Sn2O7 *Ln=La, Pr, Nd, Sm, Gd, Tb, Ho, Er, Lu, and Y* have been investigated using the first-principles total energy calculations. The calculated results show that Ln-site cation ionic radius, x-O48f, lattice constant and the covalency of the *Sn–O48f* bond have a significant affect on the defect formation energies. The cation-antisite defect has the lowest formation energy, as compared with that of other defects, indicating that cation disorder causes local oxygen disordering. The present studies suggest that Lu2Sn2O7 is the most resistant to ion beam-induced amorphization. The electronic structure calculations reveal that Ln2Sn2O7 compounds have direct band gaps of 2.64– 2.95 eV at the * point in the Brillouin zone. © 2008 American Institute of Physics.

36 MATERIALS SCIENCE↗

Liquid-like phase formation in Gd{sub 2}Zr{sub 2}O{sub 7} by extremely ionizing irradiation

Isometric Gd{sub 2}Zr{sub 2}O{sub 7} with the ordered, pyrochlore structure has an extremely high resistance to radiation-induced amorphization. Ion-beam irradiations at keV to GeV energies result in a disordered, defect-fluorite structure that remains crystalline to very large fluences. However, we report liquid-like phase formation of droplet-like surface hillocks and quenched molten tracks in Gd{sub 2}Zr{sub 2}O{sub 7}. The extremely high energy density of 12-MeV C{sub 60} clusters creates tracks with substantial volumes of amorphous material, accompanied by the formation of nanocrystals of the disordered, defect-fluorite structure. This is the first evidence of irradiation-induced amorphization of Gd{sub 2}Zr{sub 2}O{sub 7}. In contrast, irradiation of Gd{sub 2}Zr{sub 2}O{sub 7} pyrochlore with swift heavy ions of U resulted in an order-disorder transformation to defect-fluorite without any evidence of amorphization. Thermal-spike calculations highlight the dominance of the effect of deposited energy density, controlled by the projectile velocity, as compared with the energy loss.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Role of defects in BiFeO₃ multiferroic films and their local electronic structure by x-ray absorption spectroscopy

Present study reports the role of defects in the electrical transport in BiFeO₃ (BFO) multiferroic films and its local electronic structure investigated by near-edge X-ray absorption fine structure. Defects created by high energy 200 MeV Ag⁺¹⁵ ion irradiation with a fluence of ∼5 × 10¹¹ ions/cm² results in the increase in structural strain and reduction in the mobility of charge carriers and enhancement in resistive (I-V) and polarization (P-E) switching behaviour. At higher fluence of ∼5 × 10¹² ions/cm², there is a release in the structural strain due to local annealing effect, resulting in an increase in the mobility of charge carriers, which are released from oxygen vacancies and hence suppression in resistive and polarization switching. Near-edge X-ray absorption fine structure studies at Fe L₃,₂- and O K-edges show a significant change in the spectral features suggesting the modifications in the local electronic structure responsible for changes in the intrinsic magnetic moment and electrical transport properties of BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disorder effects on the band structure of ZnGeN 2 : Role of exchange defects

The role of exchange defects on the band structure of ZnGeN 2 is investigated. Exchange defects are defined through the exchange of cations Zn and Ge starting from the ideal Pna2 1 crystal structure, which obeys the local octet rule. Each such exchange creates several nitrogen-centered tetrahedra which violate the local octet rule, although overall charge neutrality is preserved. We study several distributions of exchange defects, some with all antisites making up the exchange defect close to each other and with increasing numbers of exchange defects, and others where the two types of antisites Zn Ge and Ge Zn are kept separated from each other. We also compare the results for these models with a fully random distribution of Zn and Ge on the cation sites. We show that for a single-nearest-neighbor exchange defect, the band gap is narrowed by about 0.5 eV due to two effects: (1) the Zn Ge antisites form filled acceptor states just above and merging with the valence-band maximum (VBM) of perfect crystal ZnGeN 2 and (2) the Ge Zn antisites form a resonance in the conduction band which lowers the conduction-band minimum (CBM). When more exchange defects are created, these acceptor states broaden into bands which can lower the gap further. When tetrahedra occur surrounded completely by four Zn atoms, states even deeper in the gap are found localized all near these tetrahedra, forming a separate intermediate band. Finally, for phase-segregated Zn Ge and Ge Zn , the gap is significantly more reduced, but no separate band is found to occur. The Zn Ge acceptorlike states now form a percolating defect band which is significantly wider and hence reaches deeper into the gap. In all cases, the wave functions near the top of the new VBM remain, to some extent, localized near the Zn Ge sites. For a fully random case, the gap is even more severely reduced by almost 3 eV. The total energy of the system increases with the number of octet-rule-violating tetrahedra and the energy cost per exchange defect of order 2 eV is quite high.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using defects as a ‘fossil record’ to help interpret complex processes during additive manufacturing: as applied to raster-scanned electron beam powder bed additively manufactured Ti–6Al–4V

Abstract Defects in parts produced by additive manufacturing, instead of simply being perceived as deleterious, can act as important sources of information associated with the complex physical processes that occur during materials deposition and subsequent thermal cycles. Indeed, they act as materials-state ‘fossil’ records of the dynamic AM process. The approach of using defects as epoch-like records of prior history has been developed while studying additively manufactured Ti–6Al–4V and has given new insights into processes that may otherwise remain either obscured or unquantified. Analogous to ‘epochs,’ the evolution of these defects often is characterized by physics that span across a temporal length scale. To demonstrate this approach, a broad range of analyses including optical and electron microscopy, X-ray computed tomography, energy-dispersive spectroscopy, and electron backscatter diffraction have been used to characterize a raster-scanned electron beam Ti–6Al–4V sample. These analysis techniques provide key characteristics of defects such as their morphology, location within the part, complex compositional fields interacting with the defects, and structures on the free surfaces of defects. Observed defects have been classified as banding, spherical porosity, and lack of fusion. Banding is directly related to preferential evaporation of Al, which has an influence on mechanical properties. Lack-of-fusion defects can be used to understand columnar grain growth, fluid flow of melt pools, humping, and spattering events. Graphical abstract

36 MATERIALS SCIENCE↗

Arsenate-induced maternal glucose intolerance and neural tube defects in a mouse model

Background: Epidemiological studies have linked environmental arsenic (As) exposure to increased type 2 diabetes risk. Periconceptional hyperglycemia is a significant risk factor for neural tube defects (NTDs), the second most common structural birth defect. A suspected teratogen, arsenic (As) induces NTDs in laboratory animals. Objectives: We investigated whether maternal glucose homeostasis disruption was responsible for arsenate-induced NTDs in a well-established dosing regimen used in studies of arsenic's teratogenicity in early neurodevelopment. Methods: We evaluated maternal intraperitoneal (IP) exposure to As 9.6 mg/kg (as sodium arsenate) in LM/Bc/Fnn mice for teratogenicity and disruption of maternal plasma glucose and insulin levels. Selected compounds (insulin pellet, sodium selenate (SS), N-acetyl cysteine (NAC), L-methionine (L-Met), N-tert-Butyl-{alpha}-phenylnitrone (PBN)) were investigated for their potential to mitigate arsenate's effects. Results: Arsenate caused significant glucose elevation during an IP glucose tolerance test (IPGTT). Insulin levels were not different between arsenate and control dams before (arsenate, 0.55 ng/dl; control, 0.48 ng/dl) or after glucose challenge (arsenate, 1.09 ng/dl; control, 0.81 ng/dl). HOMA-IR index was higher for arsenate (3.9) vs control (2.5) dams (p = 0.0260). Arsenate caused NTDs (100%, p < 0.0001). Insulin pellet and NAC were the most successful rescue agents, reducing NTD rates to 45% and 35%. Conclusions: IPGTT, insulin assay, and HOMA-IR results suggest a modest failure of glucose stimulated insulin secretion and insulin resistance characteristic of glucose intolerance. Insulin's success in preventing arsenate-induced NTDs provides evidence that these arsenate-induced NTDs are secondary to elevated maternal glucose. The NAC rescue, which did not restore maternal glucose or insulin levels, suggests oxidative disruption plays a role.

60 APPLIED LIFE SCIENCES↗