Search NASA⌕ Search

SEARCH · Search NASA

Results for “subsurface flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Gravity-driven controls on fluid and carbonate precipitation distributions in fractures

Abstract Many challenges related to carbon-dioxide ( $$\hbox {CO}_2$$ CO 2 ) sequestration in subsurface rock are linked to the injection of fluids through induced or existing fracture networks and how these fluids are altered through geochemical interactions. Here, we demonstrate that fluid mixing and carbonate mineral distributions in fractures are controlled by gravity-driven chemical dynamics. Using optical imaging and numerical simulations, we show that a density contrast between two miscible fluids causes the formation of a low-density fluid runlet that increases in areal extent as the fracture inclination decreases from 90 $$^\circ$$ ∘ (vertical fracture plane) to 30 $$^\circ$$ ∘ . The runlet is sustained over time and the stability of the runlet is controlled by the gravity-driven formation of 3D vortices that arise in a laminar flow regime. When homogeneous precipitation was induced, calcium carbonate covered the entire surface for horizontal fractures (0 $$^\circ$$ ∘ ). However, for fracture inclinations greater than 10 $$^\circ$$ ∘ , the runlet formation limited the areal extent of the precipitation to less than 15% of the fracture surface. These insights suggest that the ability to sequester $$\hbox {CO}_2$$ CO 2 through mineralization along fractures will depend on the fracture orientation relative to gravity, with horizontal fractures more likely to seal uniformly.

54 ENVIRONMENTAL SCIENCES↗

CONCEPTUAL MODEL FOR HYDROLOGY-BASED GEOMORPHIC EVAPOTRANSPIRATION COVERS FOR RECLAMATION OF MINE LAND

Currently there are about half a million abandoned mine sites in the U.S. and New Mexico has an estimated 15,000. Surface mining imposes severe ecological effects on the land because it not only alters the vegetation, soils, bedrock, and landforms, but also changes the surface hydrology, groundwater, and flow paths that ultimately result in degraded ecology and water quality. Two relatively new methodologies, fluvial geomorphic landform design and evapotranspiration (ET) waste covers, offer solutions to reclaim these sites for long term. GeoFluvTM is a specific geomorphic grading design method that uses natural analogues for post-mining landscapes and uses design input values taken from stable natural landscapes to make a reclamation design that provides hydrological function, supports ecosystem integrity, and is cost-effective, sustainable, and more visually attractive. It has documented the ability to produce surface runoff water quality equal to or better than adjacent undisturbed lands and has been used for disturbed lands, including active and abandoned mine sites. To manage the subsurface hydrology, surface ET covers have been used above landfills, waste sites, and mine lands. ET covers protect the underlying materials against erosion, provide a medium for vegetation growth, store precipitation within the cover, and release the stored water into atmosphere so that the infiltration of precipitation is minimized. A conceptual design study is carried out based on an actual, typical abandoned mine site near Raton, New Mexico, to which common problem conditions at abandoned mine sites are assumed. The purpose of this study is to demonstrate that superior covers can be designed by integrating these two remediation technologies (geomorphic grading and ET cover) as a geomorphic ET (GET) cover. The overall shape of the GET cover can mimic the natural topography of the surrounding area, while the thickness and layering of the cover can be optimized for best vegetation growth and infiltration control. The application of GET cover technology on mine land is expected to substantially improve the reclamation effects by coupling the benefits of the geomorphic cover (drainage reduction, runoff management, vegetation diversity) with the benefits of ET covers (vegetation growth and sustainability, percolation reduction, protection of surface and groundwater).

Tailings, Geotechnical, Water Management, Vegetati↗

Analytical Functions for 200 West Pump-and-Treat SCADA Sensor Data

Historical operations at the U.S. Department of Energy’s Hanford Site included disposal of waste fluids to the subsurface in the 200 West Area on the Hanford Central Plateau. Subsequent infiltration of fluids has resulted in groundwater contamination with carbon tetrachloride, nitrate, uranium, technetium-99, and other contaminants. A pump-and-treat (P&T) system, with an extraction/injection well network and an aboveground treatment plant, was implemented as part of interim and final remedies in the 200 West area. The HYPATIA single-page web application (part of the SOCRATES suite) is being developed to provide access to and analysis of chemistry and treatment facility sensor data for this 200 West P&T system. For the web application, analytical algorithms were developed to perform summing, differencing, smoothing, outlier detection, change-point detection, mass flow rate, and injectivity calculations on the data. Candidate algorithms were identified and tested, with the best-performing algorithms then assembled for implementation in HYPATIA. Because HYPATIA is hosted on the Amazon Web Services (AWS) cloud computing platform, algorithms were implemented in a back-end AWS Lambda function that can be called by the HYPATIA front end. The Lambda function applies the requested data processing to specified data via functions written in R, Python, and JavaScript. Development, testing, and review of the data analysis algorithms was completed under an NQA-1 quality program. This new HYPATIA functionality will provide information to support site decisions regarding P&T system performance and optimization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Atomic Dynamics of Multi‐Interfacial Migration and Transformations

Redox-induced interconversions of metal oxidation states typically result in multiple phase boundaries that separate chemically and structurally distinct oxides and suboxides. Directly probing such multi-interfacial reactions is challenging because of the difficulty in simultaneously resolving the multiple reaction fronts at the atomic scale. Using the example of CuO reduction in H 2 gas, a reaction pathway of CuO → monoclinic m-Cu 4 O 3 → Cu 2 O is demonstrated and identifies interfacial reaction fronts at the atomic scale, where the Cu 2 O/m-Cu 4 O 3 interface shows a diffuse-type interfacial transformation; while the lateral flow of interfacial ledges appears to control the m-Cu 4 O 3 /CuO transformation. Together with atomistic modeling, it is shown that such a multi-interface transformation results from the surface-reaction-induced formation of oxygen vacancies that diffuse into deeper atomic layers, thereby resulting in the formation of the lower oxides of Cu 2 O and m-Cu 4 O 3 , and activate the interfacial transformations. In conclusion, these results demonstrate the lively dynamics at the reaction fronts of the multiple interfaces and have substantial implications for controlling the microstructure and interphase boundaries by coupling the interplay between the surface reaction dynamics and the resulting mass transport and phase evolution in the subsurface and bulk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Framework for a Risk-Informed Groundwater Compliance Strategy for Corrective Action Unit 98: Frenchman Flat, Nevada National Security Site, Nye County, Nevada, Revision 1

Note: This document was prepared before the NTS was renamed the Nevada National Security Site (August 23, 2010); thus, all references to the site herein remain NTS. Corrective Action Unit (CAU) 98, Frenchman Flat, at the Nevada Test Site (NTS) was the location of ten underground nuclear tests between 1965 and 1971. As a result, radionuclides were released in the subsurface in the vicinity of the test cavities. Corrective Action Unit 98 and other CAUs at the NTS and offsite locations are being investigated. The Frenchman Flat CAU is one of five Underground Test Area (UGTA) CAUs at the NTS that are being evaluated as potential sources of local or regional impact to groundwater resources. For UGTA sites, including Frenchman Flat, contamination in and around the test cavities will not be remediated because it is technologically infeasible due to the depth of the test cavities (150 to 2,000 feet [ft] below ground surface) and the volume of contaminated groundwater at widely dispersed locations on the NTS. Instead, the compliance strategy for these sites is to model contaminant flow and transport, estimate the maximum spatial extent and volume of contaminated groundwater (over a period of 1,000 years), maintain institutional controls, and restrict access to potentially contaminated groundwater at areas where contaminants could migrate beyond the NTS boundaries.

54 ENVIRONMENTAL SCIENCES↗

Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing

Caprock formations are a crucial part of subsurface-engineered systems. Composed largely of shale, caprocks act as natural barriers that prevent the upward migration of fluids, thereby ensuring the containment of stored substances in subsurface formations. Fractures in these formations are potential leakage pathways for stored fluids. Mineral precipitation reactions in these fractures, particularly calcite, can significantly restrict the fluid permeability, reducing leakage potential. However, predictive capabilities of mineral precipitation in fractures and associated permeability evolution are limited due to a lack of fundamental understanding of such reactions in natural samples, complicated by mineral heterogeneity and the complexity of the fracture structure. In this study, 3D-printed fracture samples are used to understand the impact of carbonate mineralization on fracture aperture and permeability evolution. Samples were printed using a digital light processing (DLP) 3D printer and commercial liquid resin. Calcite precipitation was first tested on printed 2D films before conducting plug flow column experiments aimed to understand fracture permeability changes due to mineral precipitation. Contact angle measurement and Fourier transform infrared (FTIR) spectroscopy on printed 2D films show evidence of a substantial amount of surface energy for calcite nucleation and precipitation. Surface topography analysis of printed fractured surfaces reveals comparable values, highlighting the high replicability of the printed samples. During the column experiments, the permeability reduces exponentially due to a decrease in fracture aperture. Reductions in fracture aperture estimated from effluent concentration and 3D X-ray computed tomography (CT) show comparable results. Moreover, 3D X-ray CT images suggest the impact of local flow velocities on precipitation. The insights gained from this research contribute to a deeper understanding of the permeability evolution due to carbonate mineralization in caprock formations.

3D printing↗

Wettability variation and its impact on CO 2 storage capacity at the Wyoming CarbonSAFE storage hub: An experimental approach

Meeting global and national net zero carbon emission targets will require geologic carbon disposal. The U.S. Department of Energy (DOE) has accordingly funded significant research in this area, including the Wyoming CarbonSAFE project at Dry Fork Station (DFS) in Campbell County, Wyoming. This work studied wettability on micro- and macro-scales, CO 2 storage potential, and the correlation between the two to support the Wyoming CarbonSAFE project’s subsurface assessment. During the study, a target formation’s wettability was found to affect how much CO 2 can be stored in a given formation. Here, in this study, representative rock samples were selected from the target storage formations— Lakota, Hulett, and Minnelusa—based on the heterogeneity of the lithology, permeability, and porosity of the respective formations. The rock samples are all fine-grained sandstone with variable cementation and bedding structure, including different scales of laminated bedding. The porosity and permeability vary within the range of 9.0–14.3% and 0.1–28.9 mD, respectively. These rock samples were prepared for the micro-scale wettability (contact angle measurement), macro-scale wettability (wettability index derived from unsteady-state flow characterization for the core plugs), and CO 2 storage evaluation. The macro-scale experiments suggested that wettability appeared to dominate the CO 2 storage potential performance during the drainage process, where less water-wet behavior promoted higher CO 2 storage potential. The micro-scale wettability tests showed that the rock samples at the studied reservoir conditions behaved water-wet and became more water-wet as pressure increased. This kind of wettability change discourages further CO 2 storage potential yet benefits the CO 2 residual trapping as the CO 2 injection proceeds for the studied area. The results allow the recommendation of the best reservoir candidate for storage based on wettability that affects CO 2 storage. The work presented in this study provides valuable insights into wettability’s effect on the CO 2 storage capacity and wettability’s importance when identifying the optimal CO 2 storage formation to meet the project’s goals.

58 GEOSCIENCES↗

Hillslope Hydrology in Global Change Research and Earth System Modeling

Earth System Models (ESMs) are essential tools for understanding and predicting global change, but they cannot explicitly resolve hillslope-scale terrain structures that have been long recognized by hydrologists as the fundamental organizers of water, energy, and biogeochemical stores and fluxes. Here, we bring together hydrologists, Critical Zone scientists and ESM developers, to explore how hillslope structures may modulate ESM grid-level water, energy and biogeochemical fluxes. In contrast to the traditional one-dimensional (1D), vertical, 2-3m deep, and free-draining soil hydrology in current ESM land models, we argue that 3D, lateral ridge-to-valley flow through shallow and deep paths, and insolation contrasts between sunny and shady slopes, are the top two basic, long-acknowledged, and readily quantifiable organizers of water and energy (and hence vegetation) within an ESM grid cell. We argue that these two processes will be most consequential where (and when) water and/or energy are limiting. We further hypothesize that if they are implemented in ESM land models, they will increase continental water storage and residence time, buffering land ecosystems against seasonal and interannual droughts. We explore efficient ways to capture these mechanisms in ESMs and identify critical knowledge gaps preventing us from scaling up hillslope to global processes. One such gap is our extremely limited view of the subsurface, where water is stored to support vegetation and released to stream baseflow and aquatic ecosystems. We conclude with a call for global syntheses activities and model experiments to assess the impact of hillslope hydrology on global change predictions.

Fan, Ying↗

A shallow subsurface controlled release facility in Bozeman, Montana, USA, for testing near surface CO2 detection techniques and transport models

A facility has been constructed to perform controlled shallow releases of CO2 at flow rates that challenge near surface detection techniques and can be scalable to desired retention rates of large scale CO2 storage projects. Preinjection measurements were made to determine background conditions and characterize natural variability at the site. Modeling of CO2 transport and concentration in saturated soil and the vadose zone was also performed to inform decisions about CO2 release rates and sampling strategies. Four releases of CO2 were carried out over the summer field seasons of 2007 and 2008. Transport of CO2 through soil, water, plants, and air was studied using near surface detection techniques. Soil CO2 flux, soil gas concentration, total carbon in soil, water chemistry, plant health, net CO2 flux, atmospheric CO2 concentration, movement of tracers, and stable isotope ratios were among the quantities measured. Even at relatively low fluxes, most techniques were able to detect elevated levels of CO2 in the soil, atmosphere, or water. Plant stress induced by CO2 was detectable above natural seasonal variations.

54 ENVIRONMENTAL SCIENCES↗

Influence of geochemical reactions on the creep behavior of Mt. Simon sandstone

The capture and subsurface storage of carbon dioxide is a sustainable option that is currently pursued worldwide to mitigate greenhouse gas effect. However, predicting the long-term mechanical integrity of CO 2 underground storage systems remains a challenge. To address that question, it is essential to understand the influence of fluid-rock chemo-mechanical interactions on the long-term and on the time-dependent mechanical properties. In turn, the long-term mechanical response and the time-dependent mechanical behavior can be represented by the creep response. We investigate the impact of CO 2 -induced geochemical reaction on the creep response of Mt. Simon sandstone with a 50–400 micron grain size. We perform static and dynamic flow experiments on Mt. Simon sandstone specimens under geological conditions, at a temperature of T = 50 - 53 °C and for CO 2 pressures of P = 8:62; 17:2 MPa under both static flow and dynamic flow-through conditions. After aging, we employ creep indentation testing, high-resolution SEM-EDS, computer vision, machine learning, and micromechanics modeling to probe changes on the microstructure and mechanical properties. Following both static and dynamic flow-through experiments, we observe a 10–22% decrease in quartz volume fraction and an increase in both the microporosity (7–28%) and nanoporosity (60–65%). Additional CO 2 -induced microstructural changes include an enlargement of pore throats and the formation of channels. These observations point to the presence of CO 2 -induced K-feldspar dissolution and clay dissolution reactions. Here, the macroscopic creep behavior is logarithmic and the macroscopic creep modulus varies depending on the microporosity and the relative quartz and feldspar content. As a result of these geochemical reactions and of the related microstructural changes, a 55-60% decrease in the macroscopic logarithmic creep modulus is predicted.

58 GEOSCIENCES↗

Methane foam performance evaluation in water-wet unconsolidated porous media: A systematic experimental investigation at elevated pressure and temperature conditions

In the petroleum industry, enhanced oil recovery (EOR) techniques employ foam extensively to establish conformance control in heterogeneous and fractured reservoirs in order to increase the sweep efficiency. In such applications, foam performance evaluation under complex subsurface conditions is pivotal for the effective and optimized deployment of foam treatment. However, there is a scarcity of hydrocarbon gas foam generation and evaluation studies that examine the relationships between foam performance and the critical foam parameters at high-pressure and high-temperature conditions. Here, this study aims at methodically investigating the effects of several foam parameters on methane foam performance in water-wet proppant packs under harsh operating conditions. This is in relation to the technical needs of hydrocarbon foam injection into hydraulically-induced, propped fractures in unconventional oil reservoirs. To this end, a state-of-the-art experimental foam generation apparatus was designed, fabricated, and commissioned. We performed a large number of foam flow experiments on proppant packs using methane gas and different foaming agents at 3500 psi and 115°C. Anionic and amphoteric surfactants were employed to probe the effect of their ionic nature on foam performance. Foam performance sensitivities to various foam generation parameters and operating conditions, such as surfactant concentration, gas fraction, total injection rate, operating pressure, salinity, and proppant pack length were investigated. To this end, steady-state pressure drops across the proppant packs during foam generation and foam's apparent viscosity were measured to quantify the foam performance of surfactants. The results were then analyzed to determine optimum values of the foam parameters and the interplay between these parameters are discussed here. The systematic results achieved from this work are in agreement with the trends available in the literature and provide new insights into complexities of in situ foam generation in water-wet, unconsolidated porous media at extreme reservoir conditions.

03 NATURAL GAS↗

Electrical Resistivity Tomography Monitoring of In Situ Soil Flushing at the Hanford 100-K East Area: 100KE Soil Flushing Monitoring

Former operations in the 100-KE Area at the Hanford Site resulted in vadose zone hexavalent chromium that provides a source of groundwater contamination. Previous efforts to remediate vadose zone chromium involved excavation and offsite treatment of contaminated soils. Although much of the chromium was removed, contamination still exists in native soil between the water table and the bottom of the pit, which has since been backfilled. In-situ soil flushing was tested at the 100-KE Area to accelerate the removal of the remaining hexavalent chromium in the vadose zone. Soil flushing works by applying clean flush water at the surface, which mobilizes and transports chromium as it migrates downward to the water table. Once the chromium reaches the water table, it is hydraulically contained, extracted, and treated through pump and treat operations. The efficacy of soil flushing is directly related to the volume of clean water that infiltrates through contaminated soils. Therefore, performance monitoring requires and understanding of flush water migration through the vadose zone. It is challenging to comprehensively assess soil flushing performance via borehole access due to the limited volume of investigation afforded by a given wellbore. As an alternative, 3D time-lapse electrical resistivity tomography (ERT) was tested as a method of monitoring the distribution of flush water over time within the vadose zone. ERT is a method of imaging the bulk electrical conductivity of the subsurface, which is highly dependent on water saturation levels in unconsolidated and unsaturated sediments. Thus, the timing and location of changes in bulk conductivity caused by soil flushing can be used to infer flush water migration pathways. In this report we present results of 3D time-lapse ERT imaging during two separate soil flushing campaigns conducted during the spring and summer months of 2022 and 2023. Results show generally that: 1) Pit backfill materials appear to nominally have larger permeability than native soils. Consequently, the boundary between pit backfill and native soil had a significant impact on flush water migration, causing some flush water to migrate along the pit boundary to the bottom of the pit. 2) Non-uniform flows, likely caused by variations in hydrogeologic properties, developed in the pit backfill materials, resulting in uneven flush water distribution on the southern margin of the soil flushing zone. 3) Redistribution of water at the interface between backfill materials and Hanford formation materials likely facilitated elevated and uniform distribution of flush water within native soils beneath the deeper parts of the pit boundary beneath the center of the flush zone, which presumably overlie soils with elevated chromium contamination. These areas appear to have been infiltrated by higher volumes of flush water than the northern and southern margins of the flush zone. 4) In comparison to 2022, high flush water application rates significantly improved flush water distribution throughout the target flushing zone. 5) Imaging resolution was limited to a depth of approximate 20 meters below the land surface, due primarily to limitations on the lateral extent of the surface ERT array. The ~10 m region of the vadose zone between approximately 130 meters elevation and the water table at approximately 120 meters elevation was unresolved.

100 Area↗

Mineral Protection and Resource Limitations Combine to Explain Profile-Scale Soil Carbon Persistence

The fate of soil carbon (C) is largely controlled by microbial oxidation of organic matter (OM), which is constrained by a variety of mechanisms. OM association with soil minerals provides pronounced protection against microbial decomposition. However, factors such as climate, occlusion, and resource limitations also contribute to OM preservation. Here, we explore the factors explaining C distribution and age within an upland rainforest soil in Hawai'i, a site with abundant preferential flow paths (PFPs) and high short-range order (SRO) mineral content. We characterized lateral and vertical changes in Δ 14 C, SRO mineral content, C-functional group chemistry, and microbial community composition to elucidate the contributions of multiple protection mechanisms to OM preservation. Consistent with our expectation, SRO mineral content and Δ 14 C were strongly correlated (R 2 = 0.95), indicating strong mineral protection of OM throughout the profile. Surprisingly, distance from PFP was also a significant predictor of Δ 14 C and improved model fit, particularly in the shallow horizons (R 2 = 0.97). Elevated C/N ratios, decreased microbial abundance, and greater SRO mineral content suggest nitrogen limitations and enhanced mineral protection constrain OM turnover with distance from PFPs in deep, subsurface mineral horizons. Steady microbial abundance, increasing putative anaerobe abundance, and changes in C-functional group chemistry indicate oxygen limitations constrain OM turnover in the matrix of shallow mineral horizons. Given that oxygen and nutrient limitations contribute to OM preservation in this high SRO system—an exemplar of mineral protection—resource limitations may play an even more important role in OM preservation in other well-structured soils.

59 BASIC BIOLOGICAL SCIENCES↗

High-temperature high-pressure microfluidic system for rapid screening of supercritical CO 2 foaming agents

CO 2 foam helps to increase the viscosity of CO 2 flood fluid and thus improve the process efficiency of the anthropogenic greenhouse gas’s subsurface utilization and sequestration. Successful CO 2 foam formation mandates the development of high-performance chemicals at close to reservoir conditions, which in turn requires extensive laboratory tests and evaluations. This work demonstrates the utilization of a microfluidic reservoir analogue for rapid evaluation and screening of commercial surfactants (i.e., Cocamidopropyl Hydroxysultaine, Lauramidopropyl Betaine, Tallow Amine Ethoxylate, N,N,N' Trimethyl-N'-Tallow-1,3-diaminopropane, and Sodium Alpha Olefin Sulfonate) based on their performance to produce supercritical CO 2 foam at high salinity, temperature, and pressure conditions. The microfluidic analogue was designed to represent the pore sizes of the geologic reservoir rock and to operate at 100 °C and 13.8 MPa. Values of the pressure drop across the microfluidic analogue during flow of the CO 2 foam through its pore network was used to evaluate the strength of the generated foam and utilized only milliliters of liquid. The transparent microfluidic pore network allows in-situ quantitative visualization of CO 2 foam to calculate its half-life under static conditions while observing if there is any damage to the pore network due to precipitation and blockage. The microfluidic mobility reduction results agree with those of foam loop rheometer measurements, however, the microfluidic approach provided more accurate foam stability data to differentiate the foaming agent as compared with conventional balk testing. The results obtained here supports the utility of microfluidic systems for rapid screening of chemicals for carbon sequestration or enhanced oil recovery operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Changes in the Stress–Strain States of Subsurface Layers of Steel During Loading

As a result of investigations of compressive deformation of steel specimens using a Vic-3D optical system it is found out that the regions of local deformations along two mutually perpendicular directions possess different character near the butt ends of the specimen in compression. It is underlined that the values of strains along these directions are also different. In the central part of the specimen, an oval region is formed with varied patterns of microstrain distribution. The transition from the stage of elastic strain (Region I in the stress–strain curve σ = f(ɛ)) to plastic deformation is accompanied by a transition from the chaotic diversified distribution of the spatial structural elements into long bands with a characteristic distribution pattern on the specimen surface: along the macrobands of plastic deformation from the corners and side faces of the specimen towards its center. Starting from Stage 1 and to the middle of Stage IV, the key role in the strain evolution on the surface belongs to the macrobands of localized plastic flow. At the end of Stage IV, the macrobands of plastic flow degenerate. A special focus is made on the fact that the transition from one stage to the other results in the changes of the strain field distributions on the specimen surface and is characterized by a different value of the strain hardening coefficient.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Precipitation of calcium carbonate and calcium phosphate under diffusion controlled mixing

Multi-component mineral precipitation in porous, subsurface environments is challenging to simulate or engineer when in situ reactant mixing is controlled by diffusion. In contrast to well-mixed systems, the conditions that favor mineral precipitation in porous media are distributed along chemical gradients, which evolve spatially due to concurrent mineral precipitation and modification of solute transport in the media. The resulting physical and chemical characteristics of a mixing/precipitation zone are a consequence of coupling between transport and chemical processes, and the distinctive properties of individual chemical systems. We examined the spatial distribution of precipitates formed in “double diffusion” columns for two chemical systems, calcium carbonate and calcium phosphate. Polyacrylamide hydrogel was used as a low permeability, high porosity medium to maximize diffusive mixing and minimize pressure- and density-driven flow between reactant solutions. In the calcium phosphate system, multiple, visually dense and narrow bands of precipitates were observed that were reminiscent of previously reported Liesegang patterns. In the calcium carbonate system, wider precipitation zones characterized by more sparse distributions of precipitates and a more open channel structure were observed. In both cases, formation of precipitates inhibited, but did not necessarily eliminate, continued transport and mixing of the reactants. A reactive transport model with fully implicit coupling between diffusion, chemical speciation and precipitation kinetics, but where explicit details of nucleation processes were neglected, was able to qualitatively simulate properties of the precipitation zones. The results help to illustrate how changes in the physical properties of a precipitation zone depend on coupling between diffusion-controlled reactant mixing and chemistry-specific details of precipitation kinetics.

54 ENVIRONMENTAL SCIENCES↗

FINAL TECHNICAL REPORT: Underwater Active Acoustic Monitoring Network For Marine And Hydrokinetic Energy Projects

This project saw the completion of the design and development of a second generation, high frequency (90-120 kHz) Subsurface-Threat Detection Sonar Network (SDSN). The system was deployed, operated, and tested in Cobscook Bay, Maine near the site the Ocean Renewable Power Company TidGen™ power unit. This effort resulted in a very successful demonstration of the SDSN detection, tracking, localization, and classification capabilities in a high current, MHK environment as measured by results from the detection and tracking trials in Cobscook Bay. The new high frequency node, designed to operate outside the hearing range of a subset of marine mammals, was shown to detect and track objects of marine mammal-like target strength to ranges of approximately 500 meters. This performance range results in the SDSN system tracking objects for a significant duration - on the order of minutes - even in a tidal flow of 5-7 knots, potentially allowing time for MHK system or operator decision-making if marine mammals are present. Having demonstrated detection and tracking of synthetic targets with target strengths similar to some marine mammals, the primary hurdle to eventual automated monitoring is a dataset of actual marine mammal kinematic behavior and modifying the tracking algorithms and parameters which are currently tuned to human diver kinematics and classification.

16 TIDAL AND WAVE POWER↗

UNESE Data Analysis - Disko Elm Gas Transport Characteristics (NA-22 Quarterly Report)

Two research papers describing gas transport studies in subsurface containment environments appropriate for underground nuclear explosions were revised and accepted for publication in the peer-reviewed journals, Nature – Scientific Reports and Journal of Geophysical Research. The Nature – Scientific Reports paper is a primary deliverable and describes the gas-transport experiment performed in P Tunnel (NNSS) and 1) subsequent analysis of field data as part of the UNESE program. The Journal of Geophysical Research paper describes an experiment, supported mainly by DARPA and led by researchers at Weston Geophysical and New Mexico Tech., with 2) analyses supported by this project to evaluate the ability of SF6 gas tracer to track xenon gas migration under conditions related to a previous UNESE experiment. Two new tasks consider 3) evaluation of detonation heating and multiphase flow on arrival of xenon at the surface and 4) the impact of surface or Langmuir adsorption of gases being transported through pores and along fractures.

58 GEOSCIENCES↗