Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface charging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Effects of local electric surface potential on holes charging process in uncapped germanium nanocrystal

The charging kinetics of holes are investigated in an uncapped Ge nanocrystal by the use of the nano-electron beam induced current technique. The charging process is studied under zero volt or under an appropriate electric field. The investigation is repeated many times on the same nanocrystal and on others in the same sample to attest of the reproducibility of the results. At 0 V, the cycles of charging kinetics are superimposed and are in a steady state, but an instantaneous local and negative surface potential, established in the nanocrystal at the beginning of the kinetics, slows down the holes charging process. Under an external field, the energy band bending accentuation affects the holes charging time constants. As a result, the holes charging cycles weakly affect the electrical performance of the thin oxide as is indicated by the value of the measured local resistivity of 6 × 10{sup 10}–10{sup 11} Ω cm, which is relatively lower than that of the thick thermal oxide.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge carrier dynamics and surface plasmon interaction in gold nanorod-blended organic solar cell

The inclusion of plasmonic nanoparticles into organic solar cell enhances the light harvesting properties that lead to higher power conversion efficiency without altering the device configuration. This work defines the consequences of the nanoparticle overloading amount and energy transfer process between gold nanorod and polymer (active matrix) in organic solar cells. We have studied the hole population decay dynamics coupled with gold nanorods loading amount which provides better understanding about device performance limiting factors. The exciton and plasmon together act as an interacting dipole; however, the energy exchange between these two has been elucidated via plasmon resonance energy transfer (PRET) mechanism. Further, the charge species have been identified specifically with respect to their energy levels appearing in ultrafast time domain. The specific interaction of these charge species with respective surface plasmon resonance mode, i.e., exciton to transverse mode of oscillation and polaron pair to longitudinal mode of oscillations, has been explained. Thus, our analysis reveals that PRET enhances the carrier population density in polymer via non-radiative process beyond the concurrence of a particular plasmon resonance oscillation mode and polymer absorption range. These findings give new insight and reveal specifically the factors that enhance and control the performance of gold nanorods blended organic solar cells. This work would lead in the emergence of future plasmon based efficient organic electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of charge control techniques on spacecraft thermal surfaces (electrostatic discharge study)

The charging and discharging characteristics of various dielectric materials commonly used on spacecraft were tested. The experimental apparatus and the calculations used to analyze the data generated during the testing are described. The test technique, results, and analysis used are presented. Indium tin oxide coated Teflon, Kapton, and quartz do not charge significantly. CTL 15 white paint shows no large charge build up. Pinholes in Teflon and Kapton increase the leakage through the sample and reduce the energy released in an arc. Conductive grids in Teflon and Kapton reduce the arc energy by two orders of magnitude over untreated samples. Extreme low temperatures (-195 C) do not significantly increase the arc energy of the gridded sample.

Robinson, P. A., Jr.↗

Thermal processing to modulate surface chemistry and bulk charge distribution in nickel-rich layered lithium positive electrodes

The broader application of nickel-rich layered oxides as positive electrode materials for lithium-ion batteries has been hindered by their high manufacturing cost and inferior cycling stability. Thermal processing, which is integral to electrode materials manufacturing and fundamental in materials science, has not been fully utilized to design advanced positive electrode materials. Herein, we demonstrate the capability of using quenching heat treatment to regulate Li distribution and modulate electronic structure near particle surface. The resulting materials exhibit less parasitic reactions with the electrolyte and an improved charge distribution homogeneity in secondary particles, leading to more stable cycling performance at high voltages (4.5 V vs Li/Li + ). Our synchrotron X-ray analyses reveal the underlying interplay between surface structure and bulk charge distribution in positive electrode materials particles. While strategies used to stabilize positive electrode materials through compositional control, surface modification, and electrolyte engineering have become mature, thermal processing can be advantageous to further improve positive electrode materials manufacturing.

36 MATERIALS SCIENCE↗

The structure and properties of a simple model mixture of amphiphilic molecules and ions at a solid surface

We investigate microscopic structure, adsorption, and electric properties of a mixture that consists of amphiphilic molecules and charged hard spheres in contact with uncharged or charged solid surfaces. The amphiphilic molecules are modeled as spheres composed of attractive and repulsive parts. The electrolyte component of the mixture is considered in the framework of the restricted primitive model (RPM). The system is studied using a density functional theory that combines fundamental measure theory for hard sphere mixtures, weighted density approach for inhomogeneous charged hard spheres, and a mean-field approximation to describe anisotropic interactions. Our principal focus is in exploring the effects brought by the presence of ions on the distribution of amphiphilic particles at the wall, as well as the effects of amphiphilic molecules on the electric double layer formed at solid surface. In particular, we have found that under certain thermodynamic conditions a long-range translational and orientational order can develop. The presence of amphiphiles produces changes of the shape of the differential capacitance from symmetric or non-symmetric bell-like to camel-like. Moreover, for some systems the value of the potential of the zero charge is non-zero, in contrast to the RPM at a charged surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insulator edge voltage gradient effects in spacecraft charging phenomena

Insulating surfaces on geosynchronous satellites were charged by geomagnetic substorms to a point where discharges occur. The electromagnetic pulses from these discharges couple into satellite electronic systems disrupting operations are examined. Laboratory tests conducted on insulator charging have indicated that discharges appear to be initiated at insulator edges where voltage gradients can exist. An experimental investigation was conducted to measure edge voltage gradients on silvered Teflon samples as they are charged by monoenergetic electron beams. It was found that the surface voltage at insulator edges can be approximated by an exponential expression based on an electron current density balance.

Stevens, N. J.↗

Ghost states and surface structures of the charge density wave kagome metal ScV 6 Sn 6

In this work, we investigate the high-temperature phase of the kagome metal ScV 6 Sn 6 using scanning tunneling microscopy/spectroscopy (STM/S) and density functional theory calculations. STM topographic images of the cleaved sample reveal two distinct surface terminations: flat islands with Sn termination and trenches terminated by kagome layers with Sn as the outermost atomic layer. STS measurements on the Sn-terminated and kagome-terminated surfaces show significant differences, in particular the presence of large density of states near the Fermi level in the former case. Our first-principles calculations reveal that the charge density on the kagome-terminated surface gives rise to “ghost states” which show intensity away from surface atoms, arising due to hybridization of orbitals above the surface. These states can obscure the intrinsic properties of the surface, potentially leading to misattribution of the surface termination. This underscores the need for careful interpretation in STM studies, especially when discerning surface states of localized states. Understanding the surface structure of this versatile quantum material provides essential information for interpreting surface-sensitive experiments, tailoring material properties, engineering interfaces, and controlling stability and reactivity. This knowledge paves the way for further exploration and potential applications of kagome lattice materials in various fields, including quantum computing, topological physics, and advanced electronic devices.

36 MATERIALS SCIENCE↗

Wettability and friction of water on a MoS{sub 2} nanosheet

The molybdenum disulfide (MoS{sub 2}) nanosheet is a promising two-dimensional (2D) material and has recently been used in biological sensing. While the electronic structure of 2D MoS{sub 2} sheet has been actively studied, the role of its atomic structure and thus the interfacial interactions with bio-fluids are still elusive. Using Molecular dynamics simulations, we developed MoS{sub 2} force field parameters to reproduce the experimentally determined water contact angle of the MoS{sub 2} nanosheet and then predicted the slip-length of water that has not been measured in experiment yet. Simulation results suggest that the MoS{sub 2} nanosheet is a hydrophobic and low-friction surface, despite its seemingly significant charges of surface atoms and relatively strong strength of van der Waals potentials. We expect that the developed force fields for depicting surface atoms of MoS{sub 2} will facilitate future research in understanding biomolecule-MoS{sub 2} interactions in MoS{sub 2}-based biosensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atmospheric Electric Field-Mill Sensor Field Campaign Report

The foundation stone of atmospheric electricity is the existence of a Global Electric Circuit (GEC) influencing all of the planet. In fact, global thunderstorm activity acts as a voltage source that imposes a potential difference between the ionosphere (positively charged) and the Earth’s surface (negatively charged) of about ~300 kV. Such potential difference is discharged through the poorly conducting atmosphere in fair-weather regions, with atmospheric electric fields of ~100 V/m. First evidence of the GEC was gathered by scientists involved on the Carnegie vessel expeditions (early 20th Century), in which they describe a similar daily variation of the atmospheric electric field in different parts of the Pacific Ocean. Such variation become known as the Carnegie Curve (CC).

54 ENVIRONMENTAL SCIENCES↗

Atomic Pt and molecular H{sub 2}O adsorptions on SrTiO{sub 3} with and without Nb-doping: Electron trapping center and mediating roles of Pt in charge transfer from semiconductor to water

H{sub 2}O adsorption on SrO-terminated SrTiO{sub 3} (0 0 1) surface has been investigated with the first-principles calculation based on DFT. An energy barrier of 0.221 eV for H{sub 2}O dissociation is obtained, which illustrates a spontaneous dissociation. H and O atoms on the SrO-termination of (0 0 1) surface recombine readily. It demonstrates that Pt induces surface dipole moment and changes the surface work function. Adsorption of atomic Pt on SrO-termination of Nb-doped SrTiO{sub 3} (0 0 1) surface indicates charge transfer from the surface to Pt, i.e., Pt is negatively charged. Fukui functions illustrate the role Pt played in mediating charge transfer from (0 0 1) surface to targets adsorbed on Pt. H{sub 2}O adsorption on the Pt atom supported on Nb-doped SrTiO{sub 3} confirms the charge transfer from semiconductor containing electrons to target species, which is mediated by metal. Charge transfer from negatively charged Pt to H{sub 2}O weakens (activates) the H-O bonds in molecule H{sub 2}O. - Graphical abstract: Pt mediates the charge transfer from SrTiO{sub 3} to H{sub 2}O and can improve the efficiency of photocatalytic water splitting. Highlights: Black-Right-Pointing-Pointer Pt atom is adsorbed over an O atom on the SrTiO{sub 3} (0 0 1) surface. Black-Right-Pointing-Pointer H{sub 2}O is dissociatively adsorbed on the surface; and H and O readily recombine as OH. Black-Right-Pointing-Pointer Pt plays as electron trapping center on SrTiO{sub 3} (0 0 1) surface. Black-Right-Pointing-Pointer Pt mediates the charge transfer from electron-doped SrTiO{sub 3} to H{sub 2}O. Black-Right-Pointing-Pointer Photogenerated carriers can be effectively separated due to deposited Pt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of charged particles on the surfaces of the satellites of Uranus

Measurements of the ion and electron fluxes in the Uranian magnetosphere made by the low-energy charged-particle (LECP) instrument on the Voyager 2 spacecraft are used to discuss possible particle-induced modifications of the moons and rings of Uranus. The energy spectra of the orbit-integrated particle dosages expected on the major moons are derived from the LECP measurements of particle intensities and pitch-angle distributions. Laboratory-derived results on charged-particle-induced chemical and physical modifications of H2O, CH4, CO, and CO2 ions are used. The erosion rates of water ice and the darkening of organic ices on the surfaces of the moons are estimated from the orbit-integrated fluxes. Significant darkening of fresh organic ices to depths of the order of 1 micron is expected to occur for times as short as a few thousand years. Darkening at deeper depths will occur at increasingly longer times. The implications of these results for the interpretation of remote-sensing data are discussed.

Lanzerotti, L. J.↗

Dust Charging and Transport on Surfaces

In this paper, we review laboratory studies of dust transport on surfaces in plasmas, performed for a number of different mechanisms: 1) Dust particles were levitated in plasma sheaths by electrostatic forces balancing the gravitational force. 2) Dust was observed to spread over and lift off a surface that repels electrons in a plasma. 3) Dust was transported on surfaces having different secondary electron yields in plasma with an electron beam as a consequence of differential charging. 4) We also report a mechanism of dust transport by electric fields occurring at electron beam impact/shadow boundaries. These processes are candidates to explain the formation of dust ponds that were recently observed in craters on the asteroid Eros by the NEAR Shoemaker spacecraft.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Charge accumulation and solvation in $β$-NiOOH: Surface chemistry of an OER catalyst from ML-aided simulations

Electrochemical water splitting is a key technology for a sustainable energy transition, providing a route to store surplus electricity from renewable sources. A central bottleneck is the sluggish oxygen evolution reaction (OER), which drives the search for catalysts that are active, stable, and inexpensive enough for large-scale deployment. Within this context, pure and doped NiO x H y combine high activity with low cost, making them prime candidates for alkaline OER. Yet, despite extensive study, the atomistic structure of NiOOH under operando conditions and the associated reaction mechanisms remain debated. Here, we investigate the structural complexity of pure β-NiOOH, the scaffold for its doped derivatives. We systematically investigate the oxidation of the surface adsorbates via proton-coupled electron transfer steps across relevant facets and sites, identifying the most probable sequence of deprotonation events. Our results reveal asymmetric charge accumulation on Wulff-relevant surfaces and show how applied potential can promote morphological restructuring. Explicit solvation is included through machine-learning interatomic potential molecular dynamics of the NiOOH/water interface, which allows us to resolve the hydrophobic and hydrophilic character of different surfaces and the associated interfacial water structure. Together, these insights demonstrate how surface chemistry and solvation jointly govern the stability of NiOOH and the accumulation of surface charge, with possible implications for catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-scale imaging of ultrafast materials dynamics

The advent of short-pulse electron and x-ray sources has enabled pump-probe approaches for elucidating ultrafast materials dynamics. From such studies, a comprehensive picture of the time-dependent evolution of the initial steps of energy deposition, propagation, relaxation, and conversion in a wide range of materials can be generated. In this article, we provide an overview of the capabilities of femtosecond electron and x-ray scattering for resolving structural dynamics of materials. With such approaches, time resolutions are ultimately limited by the durations of the electron and x-ray pulses, and dynamics can be studied at length scales spanning atomic to mesoscale dimensions. The articles in this issue represent a cross section of the vigorous activity occurring in the study of light-induced ultrafast materials dynamics as it relates to charge carriers, surfaces and interfaces, lattice-coupling mechanisms, coherent structural motions, and next-generation instrument development. Here, the approaches highlighted here are leading to new physical insights, new possibilities for engineering the properties of matter, and ultimately, a new understanding of materials functionality on ultrasmall and ultrashort spatiotemporal scales.

36 MATERIALS SCIENCE↗

Direct tunneling of electrons in Al-n{sup +}-Si-SiO{sub 2}-n-Si structures under conditions of nonstationary depletion of the semiconductor surface of the majority charge carriers

Specific features of direct tunneling of electrons through an ultrathin ({approx}40 A) oxide in metal-SiO{sub 2}-Si structures under nonstationary conditions of depletion of the semiconductor surface, in which case the potential relief in the insulator is only slightly perturbed by external electric fields, have been experimentally studied. Penetrability of the tunneling barrier is appreciably limited by a classically forbidden region in n-Si (this region is brought about by fixed negative charge in SiO{sub 2}). As the voltage drop across oxide is increased, the electrons localized within this oxide transfer to the semiconductor, which is accompanied by a drastic increase in the tunneling current. The values of coefficients linear rise in the logarithm of tunneling current as the voltage at the isolator is increased are determined from the experiment. These values are not consistent with the data calculated on the basis of a model of a rectangular barrier with parameters typical of 'thick' oxides. It is shown that actual values of the effective mass are bound to be larger than 0.5m{sub 0}, while the height of the barrier is bound to be lower than 3.1 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi-surface driven frustrations in charge ordered kagome metal LuNb 6 ⁢Sn 6

The charge density wave (CDW), a translational symmetry breaking electronic liquid, plays a pivotal role in correlated quantum materials, such as high-𝑇 𝑐 superconductors and topological semimetals. Recently, CDWs that possibly intertwine with superconductivity and magnetism are observed in various kagome metals. However, the nature of CDWs and the role of the Fermi-surface (FS) topology in these materials remain an unresolved challenge. In this paper, we reveal the formation of CDWs in the newly discovered kagome metal LuNb 6 ⁢Sn 6 . Here, we observe a ‘‘yield sign’’-like hollow triangular diffuse scattering pattern and nearly complete softening of a flat optical phonon band near 𝐐 𝐻 = (1/3,1/3,1/2). The scattering intensity of the diffuse scattering displays divergent behavior as decreasing temperature until 𝑇 CDW = 70 K, where a competing CDW at 𝑄 CDW = (1/3,1/3,1/3) emerges. Combined with scanning tunneling microscopy/spectroscopy and first-principles calculations, our observations support a Fermi-surface driven frustration that suppresses the leading CDW instability at 𝐐 𝐻 . This frustration is relieved by the emergence of a subleading CDW at 𝑄 CDW . These results provide insights into the interplay between the Fermi surface, strong electron-phonon coupling, and charge density wave formation in quantum materials.

Yang, F. Z. [Oak Ridge National Laboratory (ORNL),↗

Effect of Anions on the Changes in the Structure and Adsorption Mechanism of Zirconium Species at the Muscovite (001)–Water Interface

Multivalent cations primarily exist as polynuclear hydroxo and oxyhydroxo clusters and/or nanoparticles (NPs) in aqueous environments, where their interactions with mineral surfaces can be influenced by complexing anions. In this work, we explored the distribution of tetravalent Zr adsorbed on the negatively charged basal surface of muscovite mica in four background electrolytes (0.1 M NaClO 4 , 0.1 M NaCl, 0.04 M Na 2 SO 4 , and 0.045 M Na 2 HPO 4 ) at constant pH (= 3), total Zr(IV) concentration (= 0.1 mM), and ionic strength (= 0.1 M). The results show that aqueous Zr speciation determined by reactions with anions controls the formation and structure of Zr-containing adsorbates on the mica surface. The Zr coverages measured by X-ray fluorescence (XRF) in ClO 4 - and Cl - systems were 1.3 and 2.1 Zr/A UC (where A UC = 46.72 Å 2 is the area of the unit cell of the mica (001) surface), respectively, and mostly remained unchanged during the reaction time from 6 to 50 h. In these conditions, Zr adsorption occurred both as small NPs (with an average height of ~4 nm observed by ex situ atomic force microscopy, AFM) and in a ~2 nm-thick molecular layer (observed by in situ resonant anomalous X-ray reflectivity, RAXR). In comparison, higher Zr coverages that increased with reaction time (i.e., from ~4 to ~7 Zr/A UC from 6 to 50 h reactions) were observed in the SO 4 2- system. Ex situ AFM showed that the Zr uptake in this system occurred predominantly as NPs that were ~5 to 15 nm tall and 20 to 40 nm wide, but no evidence of the interfacial molecular-layer formation was observed by RAXR. In the HPO 4 2– solution, all measurements unequivocally showed no significant Zr sorption, in stark contrast to the observations in the other solutions. Details of the Zr surface coverage and sorption modes are consistent with the known clustering of tetravalent Zr in solutions in the presence of these anions. These results reveal the critical impact of anions on the adsorption affinity and mechanism of Zr on the negatively charged mica surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measuring Vibronic Coupling and Ultrafast Charge Delocalization on Nanocrystal Surfaces Using Ligand-Specific Vibrational Probes

The primary goal of this proposal was to measure and quantify how vibronic ligand-exciton interactions at the inorganic-organic interface of semiconductor nanocrystals (NCs) govern femtosecond non-radiative relaxation and charge delocalization mechanisms as a function of nanocrystal and ligand structures – including NC size, shape, and ligand identity. Molecular-scale chemical and physical properties and interactions of surface ligands dictate nanocrystal exciton dynamics on the femto-to-microsecond timescales. Improvements in synthesis, experimental, and theoretical characterizations have enhanced our understanding of NC photophysics. However, quantitative descriptions of complex ligand-exciton interactions at the NC surface have remained elusive, which limits elucidation of relaxation mechanisms that determine overall carrier transfer dynamics at the exciton-ligand interface. Thus, the central motivation for this proposal was to fill a significant knowledge gap for judicious selection of ligand-functionalized nanocrystals for targeted isolation and capture of charge carriers to drive selective organic photocatalytic transformations in NC photocatalysts and NC-assembled photonic materials. Our unique two-pronged experimental approach combining nanocrystal synthesis and ligand-specific nonlinear spectroscopy has resulted in (i) four peer-reviewed publications; (ii) 12+ invited and contributed posters and talks at national and international scientific meetings and seminars, (iii) two completed PhD theses, (iv) training of two postdoctoral researchers, three PhD students, and two undergraduate students, and (v) two manuscripts under preparation.

36 MATERIALS SCIENCE↗