Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface conditioning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

The sensitive surface chemistry of Co-free, Ni-rich layered oxides: identifying experimental conditions that influence characterization results

Recent studies have suggested that Co-free, Ni-rich layered cathodes (e.g., doped LiNiO2) can provide promising battery performance for practical applications. However, these layered cathodes suffer from significant surface instability during various stages of the sample history, which generates inherent challenges for achieving stable battery performance and obtaining statistically representative characterization results. To reliably report the surface chemistry of these materials, delicate controls of stepwise sample preparation are required. In this study, we aim to reveal how the surface chemistry of LiNiO2 based materials changes with various environments, including human exhalation, sample storage, sample preparation, electrochemistry cycling, and surface doping. Our results demonstrate that the surface of these materials is highly reactive and prone to alter at various stages of sample handling and characterization. The sensitive surface could impact the interpretation of the surface chemical and structural information, including surface carbonate formation, transition metal reduction and dissolution, and surface reconstruction. Importantly, the heterogeneity of the surface degradation calls for a consolidation of nanoscale, high-resolution characterization, and ensemble-averaged methods in order to improve statistical representation. Furthermore, the doping chemistry can effectively mitigate the surface degradation and improve overall battery performance due to the enhanced surface oxygen retention. Our study highlights the necessity of strict measurements through complementary characterizations at multiple length scales to eliminate unintentional biased conclusions.

surface chemistry, Co-free Ni-rich cathodes, Istab↗

VHF SoOp (Signal of Opportunity) Technology Demonstration for Soil Moisture Measurement Using Microwave Hydraulic Boom Truck Platform

A goal of this research is to test deployable VHF antennas for 6U Cubesat platforms to enable validation of root zone soil moisture (RZSM) estimation algorithms for signal of opportunity (SoOp) remote sensing over the 240-270 MHz frequency band. The proposed work provides a strong foundation for establishing a technology development path for maturing a global direct surface soil moisture (SM) and RZSM measurement system over a variety of land covers. Knowledge of RZSM up to a depth of 1 meter and surface SM up to a depth of 0.05 meter on a global scale, at a spatial resolution of 1-10 km through moderate-to-heavy vegetation, is critical to understanding global water resources and the vertical moisture gradient in the Earths surface layer which controls moisture interactions between the soil, vegetation, and atmosphere. Current observations of surface SM from space by L-band radiometers (1.4 GHz) and radars (1.26 GHz) are limited to measurements of surface SM up to a depth of 0.05 meter through moderate amounts of vegetation. This limitation is mainly due to the inability of L-band signals to penetrate through dense vegetation and deep into the soil column. Satellite observations of the surface moisture conditions are coupled to sophisticated models which extrapolate the surface SM into the root zone, thus providing an indirect estimate rather than a direct measurement of RZSM. To overcome this limitation, low-frequency airborne radars operating at 435 MHz and 118 MHz have been investigated, since these lower frequencies should penetrate denser vegetation and respond to conditions deeper in the soil.

SoOp↗

The bubbly-slug transition in a boiling two-phase flow under microgravity

A theory is presented to describe, in reduced gravity flow boiling, the transition from bubbly two-phase flow to slug flow. It is shown that characteristics of the bubbly flow and the transition were controlled by the mechanism of vapor bubble growth dynamics. By considering in nucleate boiling, behavior of vapor bubbles at departure from a heated surface a condition required for transition was determined. Although required, this condition alone could not ensure coalescence of bubbles to cause the transition to slug two-phase flow. The condition leading to coalescence, therefore, was obtained by examining oscillations of vapor bubbles following their departure from the heated surface. The predicted transition conditions were compared with the prediction and test data reported for adiabatic reduced gravity two-phase flow, and good qualitative agreement was found.

Kiper, Ali M.↗

Applications of the method of Monte Carlo to problems in thermal radiation

A summary of the work involving the Monte Carlo method in the solution of problems in thermal radiation transfer is presented, which indicates general methods previously used for solving problems in which radiation is coupled with other modes of energy transfer. Previous work involving radiation in absorbing-emitting media is included. An example is outlined to indicate the use of the Monte Carlo method in the design of a space radiator. Suggestions are given for solution of a complex case incorporating the effects of coupled conduction, convection and radiation, wavelength dependent and selective surfaces, nonisothermal conditions, and strongly directional or nondiffuse emitting and reflecting surfaces. A discussion is given of the factors that may affect convergence, running time, and accuracy of the Monte Carlo solutions and of the advantages and disadvantages of this approach for practical problems. Also discussed are the case of programming for complex problems and the probable machine time requirements of the method.

THERMAL RADIATION↗

Extending a transonic small disturbance code to treat swept vertical surfaces

A flexible-swept vertical surface capability has been developed and implemented within the CAP-TSD transonic small disturbance (TSD) code. The new capability required a modification to the TSD equation and a grid transformation for swept vertical surfaces. Modifications to the vertical surface boundary conditions allow it to be treated as a flexible surface. The new capability extends the range of problems which the code can treat. In order to assess the accuracy of the modifications, calculations were performed for a rectangular T-tail configuration and an AGARD T-tail configuration. Unsteady forces and moments are presented for the rectangular T-tail oscillating in yaw for a range of reduced frequencies. Comparisons are presented with linear theory and experiment. Steady and unsteady surface pressures are presented for the AGARD T-tail along with generalized aerodynamic forces. Comparisons are made with linear theory. The comparisons demonstrate the accuracy of the vertical surface modifications.

Gibbons, Michael D.↗

A Mars Environmental Survey mission concept

The Mars Environmental Survey, or 'MESUR' mission presently discussed proceeds by emplacing a network of small stations on the Martian surface. These stations will determine the global seismicity of the planet, to facilitate studies of its internal structure; they will also broaden knowledge of atmospheric and surface meteorology conditions and determine the major and minor elements of surface soil and rock compositions. They are also expected to deepen understanding of Mars' middle and upper atmosphere. Attention is given to the design and operations of the MESUR lander.

Hubbard, G. S.↗

A coronal magnetic field model with horizontal volume and sheet currents

When globally mapping the observed photospheric magnetic field into the corona, the interaction of the solar wind and magnetic field has been treated either by imposing source surface boundary conditions that tacitly require volume currents outside the source surface or by limiting the interaction to thin current sheets between oppositely directed field regions. Yet observations and numerical Magnetohydrodynamic (MHD) calculations suggest the presence of non-force-free volume currents throughout the corona as well as thin current sheets in the neighborhoods of the interfaces between closed and open field lines or between oppositely directed open field lines surrounding coronal helmet-streamer structures. This work presents a model including both horizontal volume currents and streamer sheet currents. The present model builds on the magnetostatic equilibria developed by Bogdan and Low and the current-sheet modeling technique developed by Schatten. The calculation uses synoptic charts of the line-of-sight component of the photospheric magnetic field measured at the Wilcox Solar Observatory. Comparison of an MHD model with the calculated model results for the case of a dipole field and comparison of eclipse observations with calculations for CR 1647 (near solar minimum) show that this horizontal current-current-sheet model reproduces polar plumes and axes of corona streamers better than the source-surface model and reproduces polar plumes and axes of corona streamers better than the source-surface model and reproduces coro nal helmet structures better than the current-sheet model.

Zhao, Xuepu↗

An analytical and experimental study for surface heat flux determination

A numerical method by which data from a single embedded thermocouple can be used to predict the transient thermal environment for both high- and low-conductivity materials is described. The results of an investigation performed to verify the method clearly demonstrate that accurate transient surface heating conditions can be obtained from a thermocouple 1.016 cm from the surface in a low-conductivity material. Space Shuttle Orbiter thermal protection system materials having temperature- and pressure-dependent properties and typical Orbiter entry heating conditions were used to verify the accuracy of the analytical procedure. Analytically generated, as well as experimental, data were used to compare predicted and measured surface temperatures.

Williams, S. D.↗

Land Surface Temperature Measurements form EOS MODIS Data

We have developed a physics-based land-surface temperature (LST) algorithm for simultaneously retrieving surface band-averaged emissivities and temperatures from day/night pairs of MODIS (Moderate Resolution Imaging Spectroradiometer) data in seven thermal infrared bands. The set of 14 nonlinear equations in the algorithm is solved with the statistical regression method and the least-squares fit method. This new LST algorithm was tested with simulated MODIS data for 80 sets of band-averaged emissivities calculated from published spectral data of terrestrial materials in wide ranges of atmospheric and surface temperature conditions. Comprehensive sensitivity and error analysis has been made to evaluate the performance of the new LST algorithm and its dependence on variations in surface emissivity and temperature, upon atmospheric conditions, as well as the noise-equivalent temperature difference (NE(Delta)T) and calibration accuracy specifications of the MODIS instrument. In cases with a systematic calibration error of 0.5%, the standard deviations of errors in retrieved surface daytime and nighttime temperatures fall between 0.4-0.5 K over a wide range of surface temperatures for mid-latitude summer conditions. The standard deviations of errors in retrieved emissivities in bands 31 and 32 (in the 10-12.5 micrometer IR spectral window region) are 0.009, and the maximum error in retrieved LST values falls between 2-3 K. Several issues related to the day/night LST algorithm (uncertainties in the day/night registration and in surface emissivity changes caused by dew occurrence, and the cloud cover) have been investigated. The LST algorithms have been validated with MODIS Airborne Simulator (MAS) dada and ground-based measurement data in two field campaigns conducted in Railroad Valley playa, NV in 1995 and 1996. The MODIS LST version 1 software has been delivered.

Wan, Zhengming↗

TIDAL LIMITS TO PLANETARY HABITABILITY

The habitable zones (HZs) of main-sequence stars have traditionally been defined as the range of orbits that intercept the appropriate amount of stellar flux to permit surface water on a planet. Terrestrial exoplanets discovered to orbit M stars in these zones, which are close-in due to decreased stellar luminosity, may also undergo significant tidal heating. Tidal heating may span a wide range for terrestrial exoplanets and may significantly affect conditions near the surface. For example, if heating rates on an exoplanet are near or greater than that on Io (where tides drive volcanism that resurfaces the planet at least every 1 Myr) and produce similar surface conditions, then the development of life seems unlikely. On the other hand, if the tidal heating rate is less than the minimum to initiate plate tectonics, then CO{sub 2} may not be recycled through subduction, leading to a runaway greenhouse that sterilizes the planet. These two cases represent potential boundaries to habitability and are presented along with the range of the traditional HZ for main-sequence, low-mass stars. We propose a revised HZ that incorporates both stellar insolation and tidal heating. We apply these criteria to GJ 581 d and find that it is in the traditional HZ, but its tidal heating alone may be insufficient for plate tectonics.

99 GENERAL AND MISCELLANEOUS↗

The Lunar Neon Exosphere Seen in LACE Data

Using the LACE data from Apollo 17 we have found measured neon densities consistent with the 20Ne surface number densities reported by Cook et al. (2013) for normal conditions, terminator surface densities of 3 (±1.5) × 10(exp 3) per cu.cm. These values are almost an order of magnitude less than those reported by Benna et al. (2015) for CME conditions. Using a Monte Carlo model and assuming the normal solar wind and a photoionization lifetime for Ne of 300 days, our result was more consistent with the Benna (2015) result than our measured result. Two lunations showed an increase in Ne during the night, consistent with the simulation, but two of the lunations showed a decrease in surface number density through the night. We have shown that explaining the Ne distribution is not as simple as assuming dynamic equilibrium with the solar wind and an exosphere accommodated to the local surface temperature.

LACE Data↗

Surface heat flux determination: An analytical and experimental study using a single embedded thermocouple

A numerical method by which data from a single embedded thermocouple can be used to predict the transient thermal environment for both high- and low-conductivity materials is described. The results of an investigation performed to verify the method clearly demonstrate that accurate, transient, surface heating conditions can be obtained from a thermocouple l.016 centimeters from the heating surface in a low-conductivity material. Space shuttle orbiter thermal protection system materials having temperature- and pressure-dependent properties, and typical orbiter entry heating conditions were used to verify the accuracy of the analytical procedure. Analytically generated, as well as experimental, data were used to compare predicted and measured surface temperatures.

Williams, S. D.↗

Reactive scattering of H{sub 2} from metal surfaces under fast-grazing-incidence conditions

We have studied the interaction of molecular hydrogen with metal surfaces under fast-grazing-incidence conditions, by means of classical dynamics calculations based on density functional theory six-dimensional potential energy surfaces. We have performed calculations on two activated systems, H{sub 2}/NiAl(110) and H{sub 2}/Cu(111), and on two nonactivated systems, H{sub 2}/Pd(111) and H{sub 2}/Pd(110). We show that for rather open surfaces the computed 1-R probabilities (where R represents the reflectivity) as a function of the normal collision energy at grazing incidence (along low-Miller-index directions) mimic reasonably well the dissociative adsorption probabilities obtained at normal incidence and thermal energies from the dissociation threshold up to the saturation limit. Our results indicate that fast grazing incidence experiments could be used as complement to traditional sticking experiments at thermal energies to determine dissociative adsorption saturation limits, which are usually unreachable due to limitations in traditional molecular beam experiments

74 ATOMIC AND MOLECULAR PHYSICS↗

A NICER View of the Massive Pulsar PSR J0740+6620 Informed by Radio Timing and XMM-Newton Spectroscopy

We report on Bayesian estimation of the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer X-ray Timing Instrument event data. We condition on informative pulsar mass, distance, and orbital inclination priors derived from the joint North American Nanohertz Observatory for Gravitational Waves and Canadian Hydrogen Intensity Mapping Experiment/Pulsar wideband radio timing measurements of Fonseca et al. We use XMM-Newton European Photon Imaging Camera spectroscopic event data to inform our X-ray likelihood function. The prior support of the pulsar radius is truncated at 16 km to ensure coverage of current dense matter models. We assume conservative priors on instrument calibration uncertainty. We constrain the equatorial radius and mass of PSR J0740+6620 to be ${12.39}_{-0.98}^{+1.30}$ km and ${2.072}_{-0.066}^{+0.067}$ M ⊙ respectively, each reported as the posterior credible interval bounded by the 16% and 84% quantiles, conditional on surface hot regions that are non-overlapping spherical caps of fully ionized hydrogen atmosphere with uniform effective temperature; a posteriori, the temperature is ${\mathrm{log}}_{10}(T\,[{\rm{K}}])={5.99}_{-0.06}^{+0.05}$ for each hot region. All software for the X-ray modeling framework is open-source and all data, model, and sample information is publicly available, including analysis notebooks and model modules in the Python language. Furthermore, our marginal likelihood function of mass and equatorial radius is proportional to the marginal joint posterior density of those parameters (within the prior support) and can thus be computed from the posterior samples.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal/Pyrolysis Gas Flow Analysis of Carbon Phenolic Material

Provided in this study are predicted in-depth temperature and pyrolysis gas pressure distributions for carbon phenolic materials that are externally heated with a laser source. Governing equations, numerical techniques and comparisons to measured temperature data are also presented. Surface thermochemical conditions were determined using the Aerotherm Chemical Equilibrium (ACE) program. Surface heating simulation used facility calibrated radiative and convective flux levels. Temperatures and pyrolysis gas pressures are predicted using an upgraded form of the SINDA/CMA program that was developed by NASA during the Solid Propulsion Integrity Program (SPIP). Multispecie mass balance, tracking of condensable vapors, high heat rate kinetics, real gas compressibility and reduced mixture viscosity's have been added to the algorithm. In general, surface and in-depth temperature comparisons are very good. Specie partial pressures calculations show that a saturated water-vapor mixture is the main contributor to peak in-depth total pressure. Further, for most of the cases studied, the water-vapor mixture is driven near the critical point and is believed to significantly increase the local heat capacity of the composite material. This phenomenon if not accounted for in analysis models may lead to an over prediction in temperature response in charring regions of the material.

Clayton, J. Louie↗

A NICER View of the Massive Pulsar PSR J0740+6620 Informed by Radio Timing and XMM-Newton Spectroscopy

We report on Bayesian estimation of the radius, mass, and hot surface regions of the massive millisecond pulsar PSR J0740+6620, conditional on pulse-profile modeling of Neutron Star Interior Composition Explorer X-ray Timing Instrument event data. We condition on informative pulsar mass, distance, and orbital inclination priors derived from the joint North American Nanohertz Observatory for Gravitational Waves and Canadian Hydrogen Intensity Mapping Experiment/Pulsar wideband radio timing measurements of Fonseca et al. We use XMM-Newton European Photon Imaging Camera spectroscopic event data to inform our X-ray likelihood function. The prior support of the pulsar radius is truncated at 16 km to ensure coverage of current dense matter models. We assume conservative priors on instrument calibration uncertainty. We constrain the equatorial radius and mass of PSR J0740+6620 to be-+12.390.981.30km and-+2.0720.0660.067Me respectively, each reported as the posterior credible interval bounded by the 16% and 84% quantiles, conditional on surface hot regions that are non-overlapping spherical caps of fully ionized hydrogen atmosphere with uniform effective temperature; a posteriori, the temperature is=-+TlogK5.99100.060.05([])for each hot region. All software for the X-ray modeling framework is open-source and all data, model, and sample information is publicly available, including analysis notebooks and model modules in the Python language. Our marginal likelihood function of mass and equatorial radius is proportional to the marginal joint posterior density of those parameters(within the prior support)and can thus be computed from the posterior samples.

Millisecond pulsars↗

NOAA's oceanography studies under the Earth Resources Survey Program

Some results are presented of Earth Resources Survey Program studies conducted on: (1) Defining and developing methods of suppressing system noise and cloud contamination in satellite measurements of infrared window radiation. (2) Relating sea surface temperature patterns in the Gulf Stream and Gulf of Mexico to associated thermal front structure with aid of infrared data from Nimbus or ITOS. (3) Testing the feasibility of mapping sea surface roughness and low level wind speed over tropical oceans by means of ATS imagery in sun glitter zones. (4) Microwave radiometer measurements from aircraft and their usefulness and limitations for all-weather mapping of surface roughness, sea ice conditions, and possible surface temperature. (5) Evaluation of scanning radiometer data from ITOS for purposes of mapping snow and ice conditions.

Mcclain, E. P.↗

Effects of heat and mass transfer on the kinetics of CO oxidation over RuO2(110) catalyst

By combining first-principles kinetic Monte Carlo (KMC) simulation with a second-order finite difference continuum model, a hybrid computational model is developed to study the effects of heat and mass transfer in the surrounding gas phase on the heterogeneous reaction kinetics. The integrated computational framework consists of a surface phase where catalytic surface reactions occur and a gas-phase boundary layer imposed on the catalyst surface where the temperature and pressure gradients exist. The temperature and pressure gradients in the gas-phase boundary layer are the consequence of thermal and molecular diffusions of reactants and products under reaction conditions. The surface phase domain is modeled using the site-explicit first-principles KMC simulation. The gas-phase boundary layer domain is described using the grid-based Crank-Nicolson method. At each time step, the heat and mass fluxes between two domains are calculated simultaneously until the steady-state reaction condition is reached. At the steady-state reaction condition, the activity, the surface coverages of reaction intermediates, as well as the temperature and pressure gradient profiles in the gas-phase boundary layer are statistically constant with very small fluctuations. To demonstrate the idea that the proper consideration of heat and mass transfer in the reaction environment is essential to accurate measurement of the intrinsic reaction kinetics, we investigated the kinetics of CO oxidation over the RuO2(110) catalysts. By varying the thickness of the RuO2(110) catalyst, the pronounced temperature and pressure gradients are formed in the gas-phase boundary layer. Our simulation results indicate that the temperature and pressure gradients caused by the heat and mass transfer could dramatically affect the observed intrinsic reaction kinetics under presumed nominal operating reaction conditions. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗