Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Thermographic detection of disbonds

The presence of disbonds significantly decreases the integrity of many laminated structures used in aerospace applications. A thermographic technique is presented which is able to detect subsurface delamination. The technique uses one of several heat sources (such as hot water, hot air, IR lamps, etc.) to increase the surface temperature of the structure. The subsequent temperature profiles of the surface are detected with an IR camera. A novel spatial filter developed at NASA-Langley eliminates the effects of uneven heating to give clear images of the subsurface delaminations. Defects are detectable in samples as diverse as solid rocket motor samples and laminated wood for wind tunnel blades. Numerical simulations are presented for comparison with experiment results.

Winfree, William P.↗

En Echelon Ridge and Trough Structures on Europa

Europa#s surface is tectonically and morphologically complex. Europan ridges, bands, ridged bands, double ridges, complex ridges, and troughs are collectively referred to as lineaments. Some lineaments are fault zones and exhibit sets of en echelon ridge and trough structures (EERTS). EERTS can be used to interpret the stress field in which the lineaments formed. These observations suggest that some lineaments at low latitudes initially formed as shear zones. rather than as purely tensional fractures as is commonly assumed. From stepping directions of EERTS and the offset directions of the lineaments in which they occur, we infer that some EERTS form as a result of compressional stress and others form as a result of tensional stress. EERTS that are inferred to form in compression are morphologically indistinguishable from EERTS that form in tension. The presence of tensional EERTS may support a diapiric origin for some ridges.

Michalski, Joseph R.↗

Formation, structure, and orientation of gold silicide on gold surfaces

The formation of gold silicide on Au films evaporated onto Si(111) surfaces is studied by Auger electron spectroscopy (AES) and low-energy electron diffraction (LEED). Surface condition, film thickness, deposition temperature, annealing temperature, and heating rate during annealing are varied. Several oriented crystalline silicide layers are observed.

Green, A. K.↗

Models of the structure of the atmosphere of Venus from the surface to 100 kilometers altitude

From a critical comparison and synthesis of data from the four Pioneer Venus Probes, the Pioneer Venus Orbiter, and the Venera 10, 12, and 13 landers, models of the lower and middle atmosphere of Venus are derived. The models are consistent with the data sets within the measurement uncertainties and established variability of the atmosphere. The models represent the observed variations of state properties with latitude, and preserve the observed static stability. The rationale and the approach used to derive the models are discussed, and the remaining uncertainties are estimated.

Seiff, A.↗

Constraints on the lithospheric structure of Venus from mechanical models and tectonic surface features

The evidence for the extensional or compressional origins of some prominent Venusian surface features disclosed by radar images is discussed. Using simple models, the hypothesis that the observed length scales (10-20 km and 100-300 km) of deformations are controlled by dominant wavelengths arising from unstable compression or extension of the Venus lithosphere is tested. The results show that the existence of tectonic features that exhibit both length scales can be explained if, at the time of deformation, the lithosphere consisted of a crust that was relatively strong near the surface and weak at its base, and an upper mantle that was stronger than or nearly comparable in strength to the upper crust.

Zuber, Maria T.↗

Fluid-structure interaction forces at pump-impeller-shroud surfaces for axial vibration analysis

The axial forces developed on a pump impeller shroud surfaces are analyzed using a bulk-flow model of the leakage path between the impeller and the housing. Shear stresses at the impeller and the housing surfaces are modeled according to Hirs's turbulent lubrication model. The calculated results yield predictions of resonance peaks of the fluid within the annulus formed by the impeller shroud and housing. Numerical results are presented for a double-suction single-stage pump, showing that the direct stiffness of the perturbed impeller shroud forces is negligible; the forces become important only for pumps with very low axial natural frequencies in comparison to the running speed.

Childs, D. W.↗

Cross-surface interface element for coupling built-up structural subdomains

A new finite element for coupling built-up shell substructures is presented. The present work extends the hybrid variational formulation of the interface element developed by Aminpour and Ransom to permit coupling between two intersecting substructures. Designed for the assembly of independently built-up finite element models, this technique provides a level of modeling flexibility previously unavailable.

Davila, C. G.↗

Further Geophysical Studies of the Haughton Impact Structure

The approximately 23 Ma Haughton impact structure, located at 75 deg 23 min N, 89 deg 39 min W in the Canadian Arctic, on Devon Island, Nunavut, Canada is a well-preserved impact structure with an original rim diameter estimated at about 23 - 24 km. Past studies, in the 1980s, did an initial survey of the Haughton structure, looking at its surface units, exposures, map surface geology, topographic and initial surveys of gravity and magnetic fields in profiles across the impact structure. A topological outer ring and the lack of a well-defined central peak was cited as evidence that Haughton was a multi-ring structure. However other authors consider it more likely that the Haughton structure is a central-peak basin with simply a limited extent, and/or full peak features having been removed through glaciations and subsequent years. The impact structure is located in approximately 2 km thickness of carbonate material on top of a gneissic basement. The impact structure itself can be described in terms of uplifted and moved blocks of altered gneissic and carbonate material with areas in the center of the crater covered with impact carbonate melts and/or reworked impact breccias. Additional information is included in the original extended abstract.

Glass, B. J.↗

Meeting Radiation Protection Requirements and Reducing Spacecraft Mass - A Multifunctional Materials Approach

Both crew and radio-sensitive systems, especially electronics must be protected from the effects of the space radiation environment. One method of mitigating this radiation exposure is to use passive-shielding materials. In previous vehicle designs such as the International Space Station (ISS), materials such as aluminum and polyethylene have been used as parasitic shielding to protect crew and electronics from exposure, but these designs add mass and decrease the amount of usable volume inside the vehicle. Thus, it is of interest to understand whether structural materials can also be designed to provide the radiation shielding capability needed for crew and electronics, while still providing weight savings and increased useable volume when compared against previous vehicle shielding designs. In this paper, we present calculations and analysis using the HZETRN (deterministic) and FLUKA (Monte Carlo) codes to investigate the radiation mitigation properties of these structural shielding materials, which includes graded-Z and composite materials. This work is also a follow-on to an earlier paper, that compared computational results for three radiation transport codes, HZETRN, HETC, and FLUKA, using the Feb. 1956 solar particle event (SPE) spectrum. In the following analysis, we consider the October 1989 Ground Level Enhanced (GLE) SPE as the input source term based on the Band function fitting method. Using HZETRN and FLUKA, parametric absorbed doses at the center of a hemispherical structure on the lunar surface are calculated for various thicknesses of graded-Z layups and an all-aluminum structure. HZETRN and FLUKA calculations are compared and are in reasonable (18% to 27%) agreement. Both codes are in agreement with respect to the predicted shielding material performance trends. The results from both HZETRN and FLUKA are analyzed and the radiation protection properties and potential weight savings of various materials and materials lay-ups are compared.

Atwell, William↗

Active Flow Effectors for Noise and Separation Control

New flow effector technology for separation control and enhanced mixing is based upon shape memory alloy hybrid composite (SMAHC) technology. The technology allows for variable shape control of aircraft structures through actively deformable surfaces. The flow effectors are made by embedding shape memory alloy actuator material in a composite structure. When thermally actuated, the flow effector def1ects into or out of the flow in a prescribed manner to enhance mixing or induce separation for a variety of applications, including aeroacoustic noise reduction, drag reduction, and f1ight control. The active flow effectors were developed for noise reduction as an alternative to fixed-configuration effectors, such as static chevrons, that cannot be optimized for airframe installation effects or variable operating conditions and cannot be retracted for off-design or fail-safe conditions. Benefits include: Increased vehicle control, overall efficiency, and reduced noise throughout all f1ight regimes, Reduced flow noise, Reduced drag, Simplicity of design and fabrication, Simplicity of control through direct current stimulation, autonomous re sponse to environmental heating, fast re sponse, and a high degree of geometric stability. The concept involves embedding prestrained SMA actuators on one side of the chevron neutral axis in order to generate a thermal moment and def1ect the structure out of plane when heated. The force developed in the host structure during def1ection and the aerodynamic load is used for returning the structure to the retracted position. The chevron design is highly scalable and versatile, and easily affords active and/or autonomous (environmental) control. The technology offers wide-ranging market applications, including aerospace, automotive, and any application that requires flow separation or noise control.

Turner, Travis L.↗

Rough Surfaces: Is the Dark Stuff Just Shadow?: "Who knows what evil lurks in the hearts of men? The shadow knows!"

Remote observations of the surfaces of airless planetary objects are fundamental to inferring the physical structure and compositional makeup of the surface material. A number of forward models have been developed to reproduce the photometric behavior of these surfaces, based on specific, assumed structural properties such as macroscopic roughness and associated shadowing. Most work of this type is applied to geometric albedos, which are affected by complicated effects near zero phase angle that represent only a tiny fraction of the net energy reflected by the object. Other applications include parameter fits to resolved portions of some planetary surface as viewed over a range of geometries. The spherical albedo of the entire object (when it can be determined) captures the net energy balance of the particle more robustly than the geometric albedo. In most treatments involving spherical albedos, spherical albedos and particle phase functions are often treated as if they are independent, neglecting the effects of roughness. In this paper we take a different approach. We note that whatever function captures the phase angle dependence of the brightness of a realistic rough, shadowed, flat surface element relative to that of a smooth granular surface of the same material, it is manifested directly in both the integral phase function and the spherical albedo of the object. We suggest that, where broad phase angle coverage is possible, spherical albedos may be easily corrected for the effects of shadowing using observed (or assumed) phase functions, and then modeled more robustly using smooth-surface regolith radiative transfer models without further imposed (forward-modeled) shadowing corrections. Our approach attributes observed "power law" phase functions of various slope (and "linear" ranges of magnitude-vs.-phase angle) to shadowing, as have others, and goes on to suggest that regolith-model-based inferences of composition based on shadow-uncorrected spherical albedos overestimate the amount of absorbing material contained in the regolith.

geometric albedos↗

Surface Composition of NiPd Alloys

Surface segregation in Ni-Pd alloys has been studied using the BFS method for alloys. Not only does the method predict an oscillatory segregation profile but it also indicates that the number of Pd-enriched surface planes can vary as a function of orientation. The segregation profiles were computed as a function of temperature, crystal face, and composition. Pd enrichment of the first layer is observed in (111) and (100) surfaces, and enrichment of the top two layers occurs for (110) surfaces. In all cases, the segregation profile shows oscillations that are actually related to weak ordering tendencies in the bulk. An atom-by-atom analysis was performed to identify the competing mechanisms leading to the observed surface behaviors. Large-scale atomistic simulations were also performed to investigate the temperature dependence of the segregation profiles as well as for analysis of the bulk structures. Finally, the observed surface behaviors are discussed in relation to the bulk phase structure of Ni-Pd alloys, which exhibit a tendency to weakly order.

Noebe, Ronald D.↗

The thermal structure and thermal evolution of the continental lithosphere

The thermal structure and evolution of the continental lithosphere are examined. Surface heat flow data and the factors which modify them are addressed, and the diversity of thermal phenomena in the lithosphere is discussed in the framework of plate interactions. The lithosphere is divided into three sections for the purposes of discussion. In the upper, near-surface zone, temperatures can be strongly affected by near-surface processes, which must be taken into account in the measurement and evaluation of surface heat flow. The thermal structure of the middle, internal zone of the lithosphere responds to the heat balance and thermal properties of the lithosphere, which define its steady state thermal structure. Internal deformation and magmatic intrusion within this zone, and interaction between the lithosphere and the asthenosphere in the lower boundary zone of the lithosphere cause transient thermal disturbances in the lithosphere. The criteria for defining the base of the thermal lithosphere are briefly discussed.

Morgan, P.↗

ICEG2D (v2.0) - An Integrated Software Package for Automated Prediction of Flow Fields for Single-Element Airfoils With Ice Accretion

An integrated geometry/grid/simulation software package, ICEG2D, is being developed to automate computational fluid dynamics (CFD) simulations for single- and multi-element airfoils with ice accretions. The current version, ICEG213 (v2.0), was designed to automatically perform four primary functions: (1) generate a grid-ready surface definition based on the geometrical characteristics of the iced airfoil surface, (2) generate high-quality structured and generalized grids starting from a defined surface definition, (3) generate the input and restart files needed to run the structured grid CFD solver NPARC or the generalized grid CFD solver HYBFL2D, and (4) using the flow solutions, generate solution-adaptive grids. ICEG2D (v2.0) can be operated in either a batch mode using a script file or in an interactive mode by entering directives from a command line within a Unix shell. This report summarizes activities completed in the first two years of a three-year research and development program to address automation issues related to CFD simulations for airfoils with ice accretions. As well as describing the technology employed in the software, this document serves as a users manual providing installation and operating instructions. An evaluation of the software is also presented.

Thompson David S.↗

Composite Piston-Cap Structure

Design eliminates thermal stress between composite cap and metal piston. New, conically surfaced, composite piston-cap structure, passively retained in metallic piston, made from carbon/carbon material, machined to shape. Shape includes conical faces, conical extensions intersect at common vertex on cylindrical axis of piston body, allowing thermal-stress-free retention of cap at all temperatures. When assembly heated or cooled, metal expands or contracts radially from coincident vertex. Where metal makes contact with carbon/carbon cap, snugly fitting conical faces slide without interference. Since metal body free to expand, no thermal stress produced in metal body or carbon/carbon cap.

Taylor, Allan↗

Advanced beaded and tubular structural panels

A program to develop lightweight beaded and tubular structural panels is described. Applications include external surfaces, where aerodynamically acceptable, and primary structure protected by heat shields. The design configurations were optimized and selected with a computer code which iterates geometric parameters to satisfy strength, stability, and weight constraints. Methods of fabricating these configurations are discussed. Nondestructive testing produced extensive combined compression, shear, and bending test data on local buckling specimens and large panels. The optimized design concepts offer 25 to 30% weight savings compared to conventional stiffened sheet construction.

Musgrove, M. D.↗

Flammability of photovoltaic modules

A series of Class B burning-brand tests were performed on experimental modules using high-temperature, back-surface materials to develop the technology base required to construct fire-ratable modules. Results indicate the existence of synergistic relationships between hydrocarbon encapsulation materials and the experimental module configurations that provide increased fire resistance. These configurations use Kapton, fiberglass, neoprene rubber, stainless-steel foil or aluminum foil as the back surface. Successful test results occur when the structural integrity of the module back surface is maintained. Test failures of these modules always occur for one of three reasons: the outermost back cover melts, rips, or is too porous. In each case flammable molten encapsulant, its gaseous byproducts, or both, penetrates the back surface of the module and bursts into flame. Future efforts to complete the technology base will concentrate on the spread-of-flame test, focusing on the more promising configurations identified in the initial series of tests.

Sugimura, R. S.↗