Search NASA⌕ Search

SEARCH · Search NASA

Results for “variance estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Improving the estimate of higher-order moments from lidar observations near the top of the convective boundary layer

Abstract. Ground-based lidar data have proven extremely useful for profiling the convective boundary layer (CBL). Many groups have derived higher-order moments (e.g., variance, skewness, fluxes) from high-temporal-resolution lidar data using an autocovariance approach. However, these analyses are highly uncertain near the CBL top when the depth of the CBL (zi) is changing during the analysis period. This is because the autocovariance approach is usually applied to constant height levels and the character of the eddies is changing on either side of the changing CBL top. Here, a new approach is presented wherein the autocovariance analysis is performed on a normalized height grid, with a temporally smoothed zi. Output from a large eddy simulation model demonstrates that deriving higher-order moments from time series on a normalized height grid has better agreement with the slab-averaged quantities than the moments derived from the original height grid.

Rosenberger, Tessa E. (ORCID:0000000333205873)↗

Application of Variance Reduction Techniques in RMC Burnup and Thermal-Hydraulic Coupled Calculation

In reactor analog simulation, the Monte Carlo method has relatively high fidelity since it can reduce calculation errors resulting from using approximation methods by describing complex geometry and neutron energy spectra. The Monte Carlo method is, in essence, a stochastic simulation of the neutron transport process, and statistical uncertainty of all the computed results must be provided. In large-scale reactor computation, this method can accurately estimate integral quantities such as the effective multiplication factor (K{sub eff}), and it can limit the uncertainty within an acceptable range via reasonably selecting simulation particles. Nevertheless, it faces great challenges in estimating local quantities like neutron flux and fission power, with uncertainty of estimators beyond acceptance. To decrease the uncertainty of local quantities by increasing simulation particles may cost much time and reduce efficiency. The main reasons are as follows. Firstly, the scale of reactors is so large that common pressurized water reactors have tens of thousands of lattice cells; secondly, uneven distribution of neutron flux and fission power causes uneven distribution of uncertainty. Smith K. puts forward the 95/95 principle to estimate whether uncertainty calculated with Monte Carlo Code satisfies the requirement. According to the principle, with a confidence level of 95%, statistical errors of power density in more than 95% of the regions should be less than 1%. To meet the requirement of the principle, the uniform fission site (UFS) method is raised currently. UFS aims at redistributing fission sources to uniformize the fission source sampling, which can make statistical variance distribution more uniform. This method, which is easy to use, will not obviously increase computation time. Many studies show that UFS has a good variance reduction effect in Monte Carlo criticality calculation, but less attention is paid to its performance in burnup calculation and thermal-hydraulic coupled calculation. Uncertainty arising from the Monte Carlo method has a large impact on burnup calculation and thermal-hydraulic coupled calculation. Variance propagates between burnup steps and between iterative steps of coupled calculation, which causes asymmetry of results of the physical symmetrical regions and instability of coupled iterative convergence errors. To further verify the effect of UFS, this study uses it in the RMC (the Reactor Monte Carlo code) burnup calculation module and the neutronics/thermohydraulics coupled calculation module, and conducts two-dimensional pressurized water reactor burnup calculation and BEAVRS benchmark thermalhydraulic coupled calculation. In this way, it verifies the improvement effect of UFS on variance propagation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Measurement of the dispersion of radiation from a steady cosmological source

The 'missing baryons' of the near universe are believed to be principally in a partially ionized state. Although passing electromagnetic waves are dispersed by the plasma, the effect has hitherto not been utilized as a means of detection because it is generally believed that a successful observation requires the background source to be highly variable, i.e., the class of sources that could potentially deliver a verdict is limited. We argue in two stages that this condition is not necessary. First, by modeling the fluctuations on macroscopic scales as interference between wave packets, we show that, in accordance with the ideas advanced by Einstein in 1917, both the behavior of photons as bosons (i.e., the intensity variance has contributions from Poisson and phase noise) and the van-Cittert-Zernike theorem are a consequence of wave-particle duality. Nevertheless, we then point out that, in general, the variance on some macroscopic timescale τ consists of (1) a main contributing term ∝1/τ, plus (2) a small negative term ∝1/τ{sup 2} due to the finite size of the wave packets. If the radiation passes through a dispersive medium, this size will be enlarged well beyond its vacuum minimum value of Δt ≈ 1/Δν, leading to a more negative (2) term (while (1) remains unchanged), and hence a suppression of the variance wrt the vacuum scenario. The phenomenon, which is typically at a few parts in 10{sup 5} level, enables one to measure cosmological dispersion in principle. Signal-to-noise estimates, along with systematic issues and how to overcome them, will be presented.

79 ASTRONOMY AND ASTROPHYSICS↗

Linking repeat lidar with Landsat products for large scale quantification of fire-induced permafrost thaw settlement in interior Alaska

The permafrost–fire–climate system has been a hotspot in research for decades under a warming climate scenario. Surface vegetation plays a dominant role in protecting permafrost from summer warmth, thus, any alteration of vegetation structure, particularly following severe wildfires, can cause dramatic top–down thaw. A challenge in understanding this is to quantify fire-induced thaw settlement at large scales (>1000 km 2 ). In this study, we explored the potential of using Landsat products for a large-scale estimation of fire-induced thaw settlement across a well-studied area representative of ice-rich lowland permafrost in interior Alaska. Six large fires have affected ~1250 km 2 of the area since 2000. We first identified the linkage of fires, burn severity, and land cover response, and then developed an object-based machine learning ensemble approach to estimate fire-induced thaw settlement by relating airborne repeat lidar data to Landsat products. The model delineated thaw settlement patterns across the six fire scars and explained ~65% of the variance in lidar-detected elevation change. Our results indicate a combined application of airborne repeat lidar and Landsat products is a valuable tool for large scale quantification of fire-induced thaw settlement.

54 ENVIRONMENTAL SCIENCES↗

Discrete filtering techniques applied to sequential GPS range measurements

The basic navigation solution is described for position and velocity based on range and delta range (Doppler) measurements from NAVSTAR Global Positioning System satellites. The application of discrete filtering techniques is examined to reduce the white noise distortions on the sequential range measurements. A second order (position and velocity states) Kalman filter is implemented to obtain smoothed estimates of range by filtering the dynamics of the signal from each satellite separately. Test results using a simulated GPS receiver show a steady-state noise reduction, the input noise variance divided by the output noise variance, of a factor of four. Recommendations for further noise reduction based on higher order Kalman filters or additional delta range measurements are included.

Vangraas, Frank↗

Soil Moisture Initialization Error and Subgrid Variability of Precipitation in Seasonal Streamflow Forecasting

Offline simulations over the conterminous United States (CONUS) with a land surface model are used to address two issues relevant to the forecasting of large-scale seasonal streamflow: (i) the extent to which errors in soil moisture initialization degrade streamflow forecasts, and (ii) the extent to which a realistic increase in the spatial resolution of forecasted precipitation would improve streamflow forecasts. The addition of error to a soil moisture initialization field is found to lead to a nearly proportional reduction in streamflow forecast skill. The linearity of the response allows the determination of a lower bound for the increase in streamflow forecast skill achievable through improved soil moisture estimation, e.g., through satellite-based soil moisture measurements. An increase in the resolution of precipitation is found to have an impact on large-scale streamflow forecasts only when evaporation variance is significant relative to the precipitation variance. This condition is met only in the western half of the CONUS domain. Taken together, the two studies demonstrate the utility of a continental-scale land surface modeling system as a tool for addressing the science of hydrological prediction.

Streamflow Prediction↗

Exploration Analysis of Carbon Dioxide Levels and Ultrasound Measures of the Eye During ISS Missions

Enhanced screening for the Visual Impairment/Intracranial Pressure (VIIP) Syndrome, including in-flight ultrasound, was implemented in 2010 to better characterize the changes in vision observed in some long-duration crewmembers. Suggested possible risk factors for VIIP include cardiovascular changes, diet, anatomical and genetic factors, and environmental conditions. As a potent vasodilator, carbon dioxide (CO (sub 2)), which is chronically elevated on the International Space Station (ISS) relative to typical indoor and outdoor ambient levels on Earth, seems a plausible contributor to VIIP. In an effort to understand the possible associations between CO (sub 2) and VIIP, this study analyzes the relationship between ambient CO (sub 2) levels on ISS and ultrasound measures of the eye obtained from ISS fliers. CO (sub 2) measurements will be pulled directly from Operational Data Reduction Complex for the Lab and Node 3 major constituent analyzers (MCAs) on ISS or from sensors located in the European Columbus module, as available. CO (sub 2) measures between ultrasound sessions will be summarized using standard time series class metrics in MATLAB including time-weighted means and variances. Cumulative CO (sub 2) exposure metrics will also be developed. Regression analyses will be used to quantify the relationships between the CO (sub 2) metrics and specific ultrasound measures. Generalized estimating equations will adjust for the repeated measures within individuals. Multiple imputation techniques will be used to adjust for any possible biases in missing data for either CO (sub 2) or ultrasound measures. These analyses will elucidate the possible relationship between CO (sub 2) and changes in vision and also inform future analysis of inflight VIIP data.

Young, M.↗

Dynamically stratified Monte Carlo forecasting

A new method for performing Monte Carlo forecasts is introduced. The method, called dynamic stratification, selects initial perturbations based on a stratification of the error distribution. A simple implementation is presented in which the error distribution used for the stratification is estimated from a linear model derived from a large ensemble of 12-h forecasts with the full dynamic model. The stratification thus obtained is used to choose a small subsample of initial states with which to perform the dynamical Monte Carlo forecasts. Several test cases are studied using a simple two-level general circulation model with uncertain initial conditions. It is found that the method provides substantial reductions in the sampling error of the forecast mean and variance when compared to the more traditional approach of choosing the initial perturbations at random. The degree of improvement, however, is sensitive to the nature of the initial error distribution and to the base state. In practice the method may be viable only if the computational burden involved in obtaining an adequate estimate of the error distribution is shared with the data-assimilation procedure.

Schubert, Siegfried↗

On the connection between least squares, regularization, and classical shadows

Classical shadows (CS) offer a resource-efficient means to estimate quantum observables, circumventing the need for exhaustive state tomography. Here, we clarify and explore the connection between CS techniques and least squares (LS) and regularized least squares (RLS) methods commonly used in machine learning and data analysis. By formal identification of LS and RLS ``shadows'' completely analogous to those in CS---namely, point estimators calculated from the empirical frequencies of single measurements---we show that both RLS and CS can be viewed as regularizers for the underdetermined regime, replacing the pseudoinverse with invertible alternatives. Through numerical simulations, we evaluate RLS and CS from three distinct angles: the tradeoff in bias and variance, mismatch between the expected and actual measurement distributions, and the interplay between the number of measurements and number of shots per measurement. Compared to CS, RLS attains lower variance at the expense of bias, is robust to distribution mismatch, and is more sensitive to the number of shots for a fixed number of state copies---differences that can be understood from the distinct approaches taken to regularization. Conceptually, our integration of LS, RLS, and CS under a unifying ``shadow'' umbrella aids in advancing the overall picture of CS techniques, while practically our results highlight the tradeoffs intrinsic to these measurement approaches, illuminating the circumstances under which either RLS or CS would be preferred, such as unverified randomness for the former or unbiased estimation for the latter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Properties of weak lensing clusters detected on Hyper Suprime-Cam's 2.3 deg{sup 2} field

We present properties of moderately massive clusters of galaxies detected by the newly developed Hyper Suprime-Cam on the Subaru telescope using weak gravitational lensing. Eight peaks exceeding a signal-to-noise ratio (S/N) of 4.5 are identified on the convergence S/N map of a 2.3 deg{sup 2} field observed during the early commissioning phase of the camera. Multi-color photometric data are used to generate optically selected clusters using the Cluster finding algorithm based on the Multiband Identification of Red-sequence galaxies algorithm. The optical cluster positions were correlated with the peak positions from the convergence map. All eight significant peaks have optical counterparts. The velocity dispersion of clusters is evaluated by adopting the Singular Isothemal Sphere fit to the tangential shear profiles, yielding virial mass estimates, M{sub 500{sub c}}, of the clusters which range from 2.7 × 10{sup 13} to 4.4 × 10 {sup 14} M{sub ⊙}. The number of peaks is considerably larger than the average number expected from ΛCDM cosmology but this is not extremely unlikely if one takes the large sample variance in the small field into account. We could, however, safely argue that the peak count strongly favors the recent Planck result suggesting a high σ{sub 8} value of 0.83. The ratio of stellar mass to the dark matter halo mass shows a clear decline as the halo mass increases. If the gas mass fraction, f{sub g}, in halos is universal, as has been suggested in the literature, the observed baryon mass in stars and gas shows a possible deficit compared with the total baryon density estimated from the baryon oscillation peaks in anisotropy of the cosmic microwave background.

79 ASTRONOMY AND ASTROPHYSICS↗

LOCAL NON-GAUSSIANITY IN THE COSMIC MICROWAVE BACKGROUND THE BAYESIAN WAY

We introduce an exact Bayesian approach to search for non-Gaussianity of local type in cosmic microwave background (CMB) radiation data. Using simulated CMB temperature maps, the newly developed technique is compared against the conventional frequentist bispectrum estimator. Starting from the joint probability distribution, we obtain analytic expressions for the conditional probabilities of the primordial perturbations given the data, and for the level of non-Gaussianity, f{sub NL}, given the data and the perturbations. We propose Hamiltonian Monte Carlo sampling as a means to derive realizations of the primordial fluctuations from which we in turn sample f{sub NL}. Although computationally expensive, this approach allows us to construct exactly the full target posterior probability distribution. When compared to the frequentist estimator, applying the Bayesian method to Gaussian CMB maps provides consistent results. For the analysis of non-Gaussian maps, however, the error bars on f{sub NL} do not show excess variance within the Bayesian framework. This finding is of particular relevance in the light of upcoming high-precision CMB measurements obtained by the Planck satellite mission.

79 ASTRONOMY AND ASTROPHYSICS↗

Detecting relic gravitational waves in the CMB: Optimal parameters and their constraints

The prospect of detecting relic gravitational waves, through their imprint in the cosmic microwave background radiation, provides an excellent opportunity to study the very early Universe. In the simplest viable theoretical models the relic gravitational wave background is characterized by two parameters, the tensor-to-scalar ratio r and the tensor spectral index n{sub t}. In this paper, we analyze the potential joint constraints on these two parameters, r and n{sub t}, using the data from the upcoming cosmic microwave background radiation experiments. Introducing the notion of the best-pivot multipole l{sub t}*, we find that at this pivot multipole the parameters r and n{sub t} are uncorrelated, and have the smallest variances. We derive the analytical formulas for the best-pivot multipole number l{sub t}*, and the variances of the parameters r and n{sub t}. We verify these analytical calculations using numerical simulation methods, and find agreement to within 20%. The analytical results provide a simple way to estimate the detection ability for the relic gravitational waves by the future observations of the cosmic microwave background radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Meteorological adjustment of yearly mean values for air pollutant concentration comparison

Using multiple linear regression analysis, models which estimate mean concentrations of Total Suspended Particulate (TSP), sulfur dioxide, and nitrogen dioxide as a function of several meteorologic variables, two rough economic indicators, and a simple trend in time are studied. Meteorologic data were obtained and do not include inversion heights. The goodness of fit of the estimated models is partially reflected by the squared coefficient of multiple correlation which indicates that, at the various sampling stations, the models accounted for about 23 to 47 percent of the total variance of the observed TSP concentrations. If the resulting model equations are used in place of simple overall means of the observed concentrations, there is about a 20 percent improvement in either: (1) predicting mean concentrations for specified meteorological conditions; or (2) adjusting successive yearly averages to allow for comparisons devoid of meteorological effects. An application to source identification is presented using regression coefficients of wind velocity predictor variables.

Sidik, S. M.↗

The structure of Saturn's rings - Implications from the Voyager stellar occultation

A 100-m resolution has been obtained in the radial direction, across the entire Saturn ring system, in Voyager 2 photopolarimeter observations of Delta Scorpii as it was occulted by the rings. An automatic search with finite Fourier transforms located 13 density waves excited by resonances with Saturn's satellites. Although strong density waves can be easily located, no waves have been identified which have predicted torques/surface mass density values lower than 4 x 10 to the 16th cu cm/sec-squared. This suggests a limit of less than 100 waves to be found in the Saturn rings. Total ring mass is estimated as 5 x 10 to the -8th of the mass of Saturn. The power spectrum for the rings shows no dominant individual wavelengths. The majority of ring structures and most variance in ring optical depth are not explainable by currently entertained physical mechanisms.

Esposito, L. W.↗

An Empirical Cumulus Parameterization Scheme for a Global Spectral Model

Realistic vertical heating and drying profiles in a cumulus scheme is important for obtaining accurate weather forecasts. A new empirical cumulus parameterization scheme based on a procedure to improve the vertical distribution of heating and moistening over the tropics is developed. The empirical cumulus parameterization scheme (ECPS) utilizes profiles of Tropical Rainfall Measuring Mission (TRMM) based heating and moistening derived from the European Centre for Medium- Range Weather Forecasts (ECMWF) analysis. A dimension reduction technique through rotated principal component analysis (RPCA) is performed on the vertical profiles of heating (Q1) and drying (Q2) over the convective regions of the tropics, to obtain the dominant modes of variability. Analysis suggests that most of the variance associated with the observed profiles can be explained by retaining the first three modes. The ECPS then applies a statistical approach in which Q1 and Q2 are expressed as a linear combination of the first three dominant principal components which distinctly explain variance in the troposphere as a function of the prevalent large-scale dynamics. The principal component (PC) score which quantifies the contribution of each PC to the corresponding loading profile is estimated through a multiple screening regression method which yields the PC score as a function of the large-scale variables. The profiles of Q1 and Q2 thus obtained are found to match well with the observed profiles. The impact of the ECPS is investigated in a series of short range (1-3 day) prediction experiments using the Florida State University global spectral model (FSUGSM, T126L14). Comparisons between short range ECPS forecasts and those with the modified Kuo scheme show a very marked improvement in the skill in ECPS forecasts. This improvement in the forecast skill with ECPS emphasizes the importance of incorporating realistic vertical distributions of heating and drying in the model cumulus scheme. This also suggests that in the absence of explicit models for convection, the proposed statistical scheme improves the modeling of the vertical distribution of heating and moistening in areas of deep convection.

Rajendran, K.↗

A GENERALIZED STOCHASTIC COLLOCATION APPROACH TO CONSTRAINED OPTIMIZATION FOR RANDOM DATA IDENTIFICATION PROBLEMS

We present a scalable, parallel mechanism for stochastic identification/control for problems constrained by partial differential equations with random input data. Several identification objectives will be discussed that either minimize the expectation of a tracking cost functional or minimize the difference of desired statistical quantities in the appropriate $L^p$ norm, and the distributed parameters/control can both deterministic or stochastic. Given an objective we prove the existence of an optimal solution, establish the validity of the Lagrange multiplier rule and obtain a stochastic optimality system of equations. The modeling process may describe the solution in terms of high dimensional spaces, particularly in the case when the input data (coefficients, forcing terms, boundary conditions, geometry, etc) are affected by a large amount of uncertainty. For higher accuracy, the computer simulation must increase the number of random variables (dimensions), and expend more effort approximating the quantity of interest in each individual dimension. Hence, we introduce a novel stochastic parameter identification algorithm that integrates an adjoint-based deterministic algorithm with the sparse grid stochastic collocation FEM approach. This allows for decoupled, moderately high dimensional, parameterized computations of the stochastic optimality system, where at each collocation point, deterministic analysis and techniques can be utilized. The advantage of our approach is that it allows for the optimal identification of statistical moments (mean value, variance, covariance, etc.) or even the whole probability distribution of the input random fields, given the probability distribution of some responses of the system (quantities of physical interest). Our rigorously derived error estimates, for the fully discrete problems, will be described and used to compare the efficiency of the method with several other techniques. Numerical examples illustrate the theoretical results and demonstrate the distinctions between the various stochastic identification objectives.

Webster, Clayton G↗

Evaluation of Wilks’ One-sided Non-parametric Formula Against Analytical Parametric Methods

This paper will be presented to the "Sensitivity and Uncertainty Methods" subgroup of the "Mathematics and Computation Division" of the ANS Winter Symposium. Direct comparisons are made via simulation between the Wilks' non-parametric and Gaussian (parametric) methods which are applied in the SASQUATCH and SINDA-SAMPLE thermal-hydraulic codes, respectively, for the Advanced Test Reactor safety basis. The level of relative conservatism is quantified for the Wilks method and shown to be greater than the parametric method for an equivalent probability and confidence level.

95/95↗

Analytical Approach to Evaluate Uncertainty in Discharged Inventory Estimates at the Hanford Site - 19012

Many waste sites (>400) located within the Central Plateau portion of the Hanford Site received liquid discharges during the nuclear weapons material production mission (1944-1988). The Hanford Soil Inventory Model (SIM) is developed to quantitatively evaluate the discharged inventory for important radionuclides and chemicals at a given waste site to support fate and transport modeling of contaminants. An analytic approach was developed to estimate inventory and associated uncertainty. The approach was implemented for SIM and compared to a prior stochastic implementation applying a Monte-Carlo sampling approach. The analytic approach provides exact mean and variance results and the run times are much faster compared to the Monte-Carlo sampling approach. With the improved solution method using the analytical approach, it is feasible to run inventory updates and reduce associated uncertainty ranges. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗