Search NASA⌕ Search

SEARCH · Search NASA

Results for “variational method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

Optimal Upsetting of Composite Cylinders

The upsetting of a composite cylinder in frictionless creep is analyzed in energy terms. Three loading programs that lead to upsetting of the cylinder by the same amount in the same time are compared. Variational analysis indicates that the kinematic loading program is best for industrial use.

42 ENGINEERING↗

VARIATIONAL PRINCIPLE FOR PLANETARY INTERIORS

In the past few years, the number of confirmed planets has grown above 2000. It is clear that they represent a diversity of structures not seen in our own solar system. In addition to very detailed interior modeling, it is valuable to have a simple analytical framework for describing planetary structures. The variational principle is a fundamental principle in physics, entailing that a physical system follows the trajectory, which minimizes its action. It is alternative to the differential equation formulation of a physical system. Applying the variational principle to the planetary interior can beautifully summarize the set of differential equations into one, which provides us some insight into the problem. From this principle, a universal mass–radius relation, an estimate of the error propagation from the equation of state to the mass–radius relation, and a form of the virial theorem applicable to planetary interiors are derived.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental energy levels and partition function of the {sup 12}C{sub 2} molecule

The carbon dimer, the {sup 12}C{sub 2} molecule, is ubiquitous in astronomical environments. Experimental-quality rovibronic energy levels are reported for {sup 12}C{sub 2}, based on rovibronic transitions measured for and among its singlet, triplet, and quintet electronic states, reported in 42 publications. The determination utilizes the Measured Active Rotational-Vibrational Energy Levels (MARVEL) technique. The 23,343 transitions measured experimentally and validated within this study determine 5699 rovibronic energy levels, 1325, 4309, and 65 levels for the singlet, triplet, and quintet states investigated, respectively. The MARVEL analysis provides rovibronic energies for six singlet, six triplet, and two quintet electronic states. For example, the lowest measurable energy level of the a{sup 3}Π{sub u} state, corresponding to the J = 2 total angular momentum quantum number and the F {sub 1} spin-multiplet component, is 603.817(5) cm{sup −1}. This well-determined energy difference should facilitate observations of singlet–triplet intercombination lines, which are thought to occur in the interstellar medium and comets. The large number of highly accurate and clearly labeled transitions that can be derived by combining MARVEL energy levels with computed temperature-dependent intensities should help a number of astrophysical observations as well as corresponding laboratory measurements. The experimental rovibronic energy levels, augmented, where needed, with ab initio variational ones based on empirically adjusted and spin–orbit coupled potential energy curves obtained using the Duo code, are used to obtain a highly accurate partition function, and related thermodynamic data, for {sup 12}C{sub 2} up to 4000 K.

79 ASTRONOMY AND ASTROPHYSICS↗

The H{sub 2} + CO ↔ H{sub 2}CO reaction: Rate constants and relevance to hot and dense astrophysical media

A theoretical thermochemical and kinetic investigation of the thermal H{sub 2} + CO ↔ H{sub 2}CO reaction was performed for a temperature range from 200 to 4000 K. Geometries and vibrational frequencies of reactants, product, and transition state (TS) were obtained at CCSD/cc-pVxZ (x = T and Q) levels and scaling factors were employed to consider anharmonicity effects on vibrational frequencies, zero-point energies, and thermal corrections provided by these methodologies. Enthalpies Gibbs energies, and rate constants for this reaction were determined by including a complete basis set extrapolation correction for the electronic properties calculated at CCSD(T)/cc-pVyZ (y = Q and 5) levels. Our study indicates that enthalpy changes for this reaction are highly dependent on temperature. Moreover, forward and reverse (high-pressure limit) rate constants were obtained from variational TS theory with quantum tunneling corrections. Thus, modified Arrhenius’ equations were fitted by means of the best forward and reverse rate constant values, which provide very reliable estimates for these quantities within the temperature range between 700 and 4000 K. To our knowledge, this is the first kinetic study done for the forward H{sub 2} + CO → H{sub 2}CO process in a wide temperature range. Finally, these results can be used to explain the formaldehyde abundance in hot and dense interstellar media, possibly providing data about the physical conditions associated with H{sub 2}CO masers close to massive star-forming regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Counting abelian squares efficiently for a problem in quantum computing

Here, I describe how the number of abelian squares of given length relates to a certain problem in theoretical quantum computing, and I present a recursive formula for calculating the number of abelian squares of length t+t over an alphabet of size d. The presented formula is similar to previously known formula but has substantially lower complexity for large d, a key improvement resulting in a practical solution to the original application.

97 MATHEMATICS AND COMPUTING↗

3D Continuous Forcing Dataset from 3D Constrained Variational Analysis at SGP

The continuous 3D large-scale forcing (VARANAL3D) data set derived from 3D constrained variational analysis (3DCVA) extends the conventional constrained variational analysis method by incorporating multiple sub-columns within the analysis domain. This advancement introduces spatial variability into the large-scale forcing fields, thereby enriching the data set’s applicability. The VARANAL3D data set spans from 2004 to 2018 and covers a region of 5˚×4.5˚ domain around the ARM SGP site. The analysis domain is divided into 10×9 sub-columns with 0.5˚ resolution. The 3D large-scale forcing data provides necessary variables to drive and evaluate single-column models (SCM), cloud-resolving models (CRM) ,and large-eddy simulations (LES), as well as information for testing model sensitivity to spatial variability of the large-scale forcing data, facilitating more rigorous testing and refinement of physical processes in SCM/CRM/LES.

54 ENVIRONMENTAL SCIENCES↗

Performance of methods for SARS-CoV-2 variant detection and abundance estimation within mixed population samples

The accurate identification of SARS-CoV-2 (SC2) variants and estimation of their abundance in mixed population samples (e.g., air or wastewater) is imperative for successful surveillance of community level trends. Assessing the performance of SC2 variant composition estimators (VCEs) should improve our confidence in public health decision making. Here, we introduce a linear regression based VCE and compare its performance to four other VCEs: two re-purposed DNA sequence read classifiers (Kallisto and Kraken2), a maximum-likelihood based method (Lineage deComposition for Sars-Cov-2 pooled samples (LCS)), and a regression based method (Freyja). We simulated DNA sequence datasets of known variant composition from both Illumina and Oxford Nanopore Technologies (ONT) platforms and assessed the performance of each VCE. We also evaluated VCEs performance using publicly available empirical wastewater samples collected for SC2 surveillance efforts. Bioinformatic analyses were performed with a custom NextFlow workflow (C-WAP, CFSAN Wastewater Analysis Pipeline). Relative root mean squared error (RRMSE) was used as a measure of performance with respect to the known abundance and concordance correlation coefficient (CCC) was used to measure agreement between pairs of estimators. Based on our results from simulated data, Kallisto was the most accurate estimator as it had the lowest RRMSE, followed by Freyja. Kallisto and Freyja had the most similar predictions, reflected by the highest CCC metrics. We also found that accuracy was platform and amplicon panel dependent. For example, the accuracy of Freyja was significantly higher with Illumina data compared to ONT data; performance of Kallisto was best with ARTICv4. However, when analyzing empirical data there was poor agreement among methods and variations in the number of variants detected (e.g., Freyja ARTICv4 had a mean of 2.2 variants while Kallisto ARTICv4 had a mean of 10.1 variants). This work provides an understanding of the differences in performance of a number of VCEs and how accurate they are in capturing the relative abundance of SC2 variants within a mixed sample (e.g., wastewater). Such information should help officials gauge the confidence they can have in such data for informing public health decisions.

60 APPLIED LIFE SCIENCES↗

The relative variational model - A topological view of matter and its properties: Space occupancy by the atoms

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. In this unified notion, physical and material properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. The crystalline solid is assumed an empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystalline structure is determined by its mean vibrational volume, which also defines the lattice parameter or interatomic distance. However, as packages of vibrational energy, phonons can only exist as vibrations of atoms. Any variation of internal energy is in fact the discretized variations of phonon's population. These variations occur in the quantized modes of vibration, and therefore the balance between the frequency and amplitude of vibrations also is a dynamic variable. In this paper, the Relative Variational Model was applied to de-convolutions of frequency spectra of the inelastic neutron scatterings. Some dynamic aspects of atom vibration were presented and evaluated in support to the model's fundamentals. (authors)

36 MATERIALS SCIENCE↗

The relative variational model: A topological view of matter and its properties: Thermal expansion

Formal definitions of convergence, connected-ness and continuity were established to characterize and describe the crystalline solid and its properties as a unified notion in the topological space. The crystalline solid is a previously empty space that has been filled with atoms and phonons, i.e., the crystal is built with packages of matter and energy in a regular and orderly repetitive pattern along three orthogonal dimensions of the space. The spatial occupation of the atom in the crystal structure is determined by its mean vibrational volume. Thus, the changes of volume and the changes of internal energy are intrinsically linked. In fact, physical and material properties are the interdependent and bijective quantifications associated with variations of the internal energy. These properties are modeled by means of an intrinsic and invariable form function: the Relative Variational Model. In this paper, the experimental data of the thermal expansion for the oxides Al{sub 2}O{sub 3} and UO{sub 2} were analytically depicted by means of this model in the temperature range of 0 K up to the melting point. (authors)

36 MATERIALS SCIENCE↗

Heterogeneous Neutron Leakage Model for PWR Pin-by-pin Calculation

In the last few decades, the nodal diffusion calculation accompanied with the assembly homogenization has been widely employed. The single assembly calculation with the reflective boundary condition (BC) would be carried out to determine the assembly-homogenized parameters. Because of the reflective BC, no axial and/or radial leakage rates have been taken into accounted for the lattice calculation. To represent the global influence of the reactor core on an assembly calculation, one mostly frequently uses a procedure called leakage model to approximately take into account the absorption due to the macroscopic structure of the physical flux in a heterogeneous situation. For the assembly homogenization, this absorption is introduced as the product of the leakage coefficient and the buckling obtained for an equivalent homogeneous medium using the well-known homogeneous B1 theory. Clearly, this is an imperfect representation of leakages in a heterogeneous medium. However, the errors introduced by the foregoing procedure are small for the whole? -assembly homogenization in a PWR. When it comes to the pin-by-pin calculation, it is not the case. The leakage rate? will be affected by the neutron streaming effect caused by the heterogeneity of the assembly. Especially when poison pins or empty channels are present, the streaming effect becomes important. The errors introduced appear particularly visible. The heterogeneous leakage model? which assumes that the neutron flux is variational and the leakage rate is not uniform over the lattice pitch is a more appropriate choice. When the heterogeneous leakage model is applied in the lattice calculation for the pin-cell homogenization, the pin-homogenized problem would be changed compared with the original assembly problem without any homogenization technique. So, the Cooperation of the heterogeneous leakage model with the pin-cell homogenization theory is unsettled. In this paper, both homogenous and heterogeneous leakage models are evaluated in pin-by-pin calculation. Their implements used in pin-cell homogenization of the lattice calculation are studied. The diffusion coefficient obtained from transport cross-section and the space-dependent leakage coefficient together with the two leakage models are analyzed for the practical reactor-core applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

PIP-II LLRF Master Oscillator and Precision Reference Line- Station Level Design and Testing

The PIP-II superconducting linac at Fermilab requires a highly stable RF Reference Line to maintain phase synchronization throughout the accelerator. Temperature-induced changes in the electrical length of long coaxial cables can introduce phase drift and measurement errors. The reference-line architecture mitigates these effects by phase averaging the forward and reflected RF signals, while a phase-locked loop anchors the system to the master oscillator. This work focuses on the characterization, validation, and mechanical integration of station-level RF assemblies using CAD modeling, vector network analyzer measurements, and spectrum analyzer testing. PID-controlled thermal plates will stabilize critical RF components and further reduce temperature-dependent phase and amplitude variations. These methods support repeatable, standardized designs that can be reliably integrated across the different reference-line stations.

Mosher, Alexander [U. Illinois, Chicago; Fermilab]↗

Bose-Einstein supersolid phase for a type of momentum-dependent interaction

A class of nonlocal interactions between bosons is found to favor a crystalline Bose-Einstein condensation ground state. By using both low-energy effective field theory and a variational wave function method, we compare this state not only with the homogeneous superfluid, as has been done previously, but also with the normal (nonsuperfluid) crystalline phase and obtain the phase diagram. The key characters are (1) the interaction potential displays a negative minimum at finite momentum, which determines the wave vector of this supersolid phase, and (2) the wavelength corresponding to the momentum minimum needs to be greater than the mean interboson distance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scalable implicit incompressible resistive MHD with stabilized FE and fully-coupled Newton–Krylov-AMG

Here, we discuss that the computational solution of the governing balance equations for mass, momentum, heat transfer and magnetic induction for resistive magnetohydrodynamics (MHD) systems can be extremely challenging. These difficulties arise from both the strong nonlinear, nonsymmetric coupling of fluid and electromagnetic phenomena, as well as the significant range of time- and length-scales that the interactions of these physical mechanisms produce. This paper explores the development of a scalable, fully-implicit stabilized unstructured finite element (FE) capability for 3D incompressible resistive MHD. The discussion considers the development of a stabilized FE formulation in context of the variational multiscale (VMS) method, and describes the scalable implicit time integration and direct-to-steady-state solution capability. The nonlinear solver strategy employs Newton–Krylov methods, which are preconditioned using fully-coupled algebraic multilevel preconditioners. These preconditioners are shown to enable a robust, scalable and efficient solution approach for the large-scale sparse linear systems generated by the Newton linearization. Verification results demonstrate the expected order-of-accuracy for the stabilized FE discretization. The approach is tested on a variety of prototype problems, that include MHD duct flows, an unstable hydromagnetic Kelvin–Helmholtz shear layer, and a 3D island coalescence problem used to model magnetic reconnection. Initial results that explore the scaling of the solution methods are also presented on up to 128K processors for problems with up to 1.8B unknowns on a CrayXK7.

97 MATHEMATICS AND COMPUTING↗

Geminal embedding scheme for optimal atomic basis set construction in correlated calculations

We introduce an efficient method to construct optimal and system adaptive basis sets for use in electronic structure and quantum Monte Carlo calculations. The method is based on an embedding scheme in which a reference atom is singled out from its environment, while the entire system (atom and environment) is described by a Slater determinant or its antisymmetrized geminal power (AGP) extension. The embedding procedure described here allows for the systematic and consistent contraction of the primitive basis set into geminal embedded orbitals (GEOs), with a dramatic reduction of the number of variational parameters necessary to represent the many-body wave function, for a chosen target accuracy. Within the variational Monte Carlo method, the Slater or AGP part is determined by a variational minimization of the energy of the whole system in presence of a flexible and accurate Jastrow factor, representing most of the dynamical electronic correlation. The resulting GEO basis set opens the way for a fully controlled optimization of many-body wave functions in electronic structure calculation of bulk materials, namely, containing a large number of electrons and atoms. We present applications on the water molecule, the volume collapse transition in cerium, and the high-pressure liquid hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Focusing of intense laser beam by a thin axially magnetized plasma lens

Focusing of intense laser beams by a thin magnetized plasma slab is investigated. A thin plasma slab is used as an optical element. The focal length is the distance between the plasma lens and the laser beam focus point. The external magnetic field is applied along the direction of the laser field propagation. The nonlinear current density induced in the plasma lens is derived up to the third order of perturbation and the evolution of the spot size for a Gaussian beam profile is determined by making use of the variational principle approach method. It is shown that the axially magnetic field decreases the minimum spot size and increases the focal length significantly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Overlap functions, spectroscopic factors, and asymptotic normalization coefficients generated by a shell-model source term

Overlap functions for one-nucleon removal are calculated as solutions of the inhomogeneous equation. The source term for this equation is generated by the 0(Planck constant/2pi)omega no-core shell-model wave functions and the effective nucleon-nucleon (NN) interactions that fit oscillator matrix elements derived from the NN scattering data. For the lightest A<=4 nuclei this method gives reasonable agreement with exact ab initio calculations. For 4<A<=16, this method gives a fair agreement between the calculated and measured asymptotic normalization coefficients. The spectroscopic factors obtained show systematic deviation from the corresponding shell-model values. This deviation correlates with nucleon separation energies and follows a similar trend seen in the reduction factor of the nucleon knockout cross sections. Comparison with the overlap functions and spectroscopic factors obtained in the variational Monte Carlo method is presented and discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A nodal transport method for coupled fast-thermal reactor analysis

We report that for efficient core analyses of coupled fast-thermal reactors, a new deterministic method has been developed based on the variational nodal transport method of VARIANT. A new multigroup cross section generation procedure was devised by combining Monte Carlo lattice calculations for thermal assemblies and the two-step procedure of the MC 2 -3 code for fast assemblies. To reduce assembly homogenization errors in nodal transport calculations, a new nodal equivalence method was developed based on the partial current discontinuity factor (PCDF) and incorporated in VARIANT. A practical procedure to calculate PCDFs with fixed source supercell calculations was also devised. The performance of the proposed method was investigated using a test problem derived from the versatile coupled test reactor (VCTR) design. The new procedure produced multigroup cross sections accurately for all assemblies. VARIANT transport calculations with PCDFs produced accurate multiplication factor and power distribution compared to reference Serpent-2 Monte Carlo solutions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Image segmentation with a novel regularized composite shape prior based on surrogate study

Purpose: Incorporating training into image segmentation is a good approach to achieve additional robustness. This work aims to develop an effective strategy to utilize shape prior knowledge, so that the segmentation label evolution can be driven toward the desired global optimum. Methods: In the variational image segmentation framework, a regularization for the composite shape prior is designed to incorporate the geometric relevance of individual training data to the target, which is inferred by an image-based surrogate relevance metric. Specifically, this regularization is imposed on the linear weights of composite shapes and serves as a hyperprior. The overall problem is formulated in a unified optimization setting and a variational block-descent algorithm is derived. Results: The performance of the proposed scheme is assessed in both corpus callosum segmentation from an MR image set and clavicle segmentation based on CT images. The resulted shape composition provides a proper preference for the geometrically relevant training data. A paired Wilcoxon signed rank test demonstrates statistically significant improvement of image segmentation accuracy, when compared to multiatlas label fusion method and three other benchmark active contour schemes. Conclusions: This work has developed a novel composite shape prior regularization, which achieves superior segmentation performance than typical benchmark schemes.

60 APPLIED LIFE SCIENCES↗