Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61

National Airspace System Delay Estimation Using Weather Weighted Traffic Counts

Assessment of National Airspace System performance, which is usually measured in terms of delays resulting from the application of traffic flow management initiatives in response to weather conditions, volume, equipment outages and runway conditions, is needed both for guiding flow control decisions during the day of operations and for post operations analysis. Comparison of the actual delay, resulting from the traffic flow management initiatives, with the expected delay, based on traffic demand and other conditions, provides the assessment of the National Airspace System performance. This paper provides a method for estimating delay using the expected traffic demand and weather. In order to identify the cause of delays, 517 days of National Airspace System delay data reported by the Federal Aviation Administration s Operations Network were analyzed. This analysis shows that weather is the most important causal factor for delays followed by equipment and runway delays. Guided by these results, the concept of weather weighted traffic counts as a measure of system delay is described. Examples are given to show the variation of these counts as a function of time of the day. The various datasets, consisting of aircraft position data, enroute severe weather data, surface wind speed and visibility data, reported delay data and number of aircraft handled by the Centers data, and their sources are described. The procedure for selecting reference days on which traffic was minimally impacted by weather is described. Different traffic demand on each reference day of the week, determined by analysis of 42 days of traffic and delay data, was used as the expected traffic demand for each day of the week. Next, the method for computing the weather weighted traffic counts using the expected traffic demand, derived from reference days, and the expanded regions around severe weather cells is discussed. It is shown via a numerical example that this approach improves the dynamic range of the weather weighted traffic counts considerably. Time histories of these new weather weighted traffic counts are used for synthesizing two statistical features, six histogram features and six time domain features. In addition to these enroute weather features, two surface weather features of number of major airports in the United States with high mean winds and low mean visibility are also described. A least squares procedure for establishing a functional relation between the features, using combinations of these features, and system delays is explored using 36 days of data. Best correlations between the estimated delays using the functional relation and the actual delays provided by the Operations Network are obtained with two different combinations of features: 1) six time domain features of weather weighted traffic counts plus two surface weather features, and 2) six histogram features and mean of weather weighted traffic counts along with the two surface weather features. Correlation coefficient values of 0.73 and 0.83 were found in these two instances.

Chatterji, Gano B.↗

Direct Validation of the Wall Interference Correction System of the Ames 11-Foot Transonic Wind Tunnel

Data from the test of a large semispan model was used to perform a direct validation of a wall interference correction system for a transonic slotted wall wind tunnel. At first, different sets of uncorrected aerodynamic coefficients were generated by physically changing the boundary condition of the test section walls. Then, wall interference corrections were computed and applied to all data points. Finally, an interpolation of the corrected aerodynamic coefficients was performed. This interpolation made sure that the corrected Mach number of a given run would be constant. Overall, the agreement between corresponding interpolated lift, drag, and pitching moment coefficient sets was very good. Buoyancy corrections were also investigated. These studies showed that the accuracy goal of one drag count may only be achieved if reliable estimates of the wall interference induced buoyancy correction are available during a test.

Ulbrich, Norbert↗

Field verification of the wind tunnel coefficients

Accurate information about wind action on antennas is required for reliable prediction of antenna pointing errors in windy weather and for the design of an antenna controller with wind disturbance rejection properties. The wind tunnel data obtained 3 years ago using a scaled antenna model serves as an antenna industry standard, frequently used for the first purpose. The accuracy of the wind tunnel data has often been challenged, since they have not yet been tested in a field environment (full-aized antenna, real wind, actual terrain, etc.). The purpose of this investigation was to obtain selected field measurements and compare them with the available wind tunnel data. For this purpose, wind steady-state torques of the DSS-13 antenna were measured, and dimensionless wind torque coefficients were obtained for a variety of yaw and elevation angles. The results showed that the differences between the wind tunnel torque coefficients and the field torque coefficients were less than 10 percent of their values. The wind-gusting action on the antenna was characterized by the power spectra of the antenna encoder and the antenna torques. The spectra showed that wind gusting primarily affects the antenna principal modes.

Gawronski, W. K.↗

An anomaly detection framework for dynamic systems using a Bayesian hierarchical framework

Complex systems are susceptible to many types of anomalies, faults, and abnormal behavior caused by a variety of off-nominal conditions that may ultimately result in major failures or catastrophic events. Early and accurate detection of these anomalies using system inputs and outputs collected from sensors and smart devices has become a challenging problem and an active area of research in many application domains. In this article, we present a new Bayesian hierarchical framework that is able to model the relationship between system inputs (sensor measurements) and outputs (response variables) without imposing strong distributional/parametric assumptions while using only a subset of training samples and sensor attributes. Then, an optimal cost-sensitive anomaly detection framework is proposed to determine whether a sample is an anomalous one taking into consideration the trade-off between misclassification errors and detection rates. The model can be used for both supervised and unsupervised settings depending on the availability of data regarding the behavior of the system under anomaly conditions. The unsupervised model is particularly useful when it is prohibitive to identify in advance the anomalies that a system may present and where no data are available regarding the behavior of the system under anomaly conditions. A Bayesian hierarchical setting is used to structure the proposed framework and help with accommodating uncertainty, imposing interpretability, and controlling the sparsity and complexity of the proposed anomaly detection framework. A Markov chain Monte Carlo algorithm is also developed for model training using past data. Furthermore, the numerical experiments conducted using a simulated data set and a wind turbine data set demonstrate the successful application of the proposed work for system response modeling and anomaly detection.

17 WIND ENERGY↗

Uncertainty Quantification in Wind Plant Energy Estimation: Preprint

Data characterizing a wind power plant's production is important for the validation, calibration, and refinement of the wake loss models used to simulate performance for pre-construction energy estimates. In this process, there is the potential for significant variation in the methods used by an analyst for, first, the preparation of the operational production data for comparison to model data and, second, the generation of analogous production data from simulations. In this work, the uncertainty introduced by these method variations is quantified by considering ensembles of analysis methods. Specifically, 1920 methods variations were developed for preparing the operational data as a predictable production benchmark and simulations taking as input sample sets of the observed wind resource ranged in size from covering 4% to 125% of a full year were run using 3 engineering wake loss models in FLORIS simulations. The benchmark and simulation input uncertainties place lower bounds on the precision of the calibration between the simulation model estimates and operational benchmark data. Even within subsets of method variations (representative of what might be seen within a single company), the uncertainty in the predictable expected production is estimated to be between 1% and 3% the median predictable expected production while the uncertainty in the simulated expected production remains at best on the order of 2%. To put this into context: the simulated expected production is very closely related to the annual energy production (AEP) metric commonly used to quantify a plant's predicted performance and a 3% error in the pre-construction AEP estimate can result in a $17M loss due to additional financing costs for a typical 100MW Texas plant.

17 WIND ENERGY↗

Offshore Wind Resource Assessment for the California Pacific Outer Continental Shelf (2020)

This report presents a state-of-the-art wind resource data set produced by the National Renewable Energy Laboratory (NREL) for the California Pacific Outer Continental Shelf (OCS). This data set replaces NREL's Wind Integration National Dataset (WIND) Toolkit for the California OCS, which was produced and released publicly in 2013 and is currently the principal data set used by stakeholders for wind resource assessment in the continental United States.

17 WIND ENERGY↗

Aerodynamic characteristics of the planetary atmosphere experiments test entry probe

The aerodynamic characteristics of the Planetary Atmosphere Experiments Test entry probe were determined experimentally in ballistic range tests over a wide range of Mach and Reynolds numbers, and were compared with full-scale flight results. The ground facility data agreed with the full-scale data within 2 to 3% in drag coefficient, and within 5 to 10% in static stability, at the higher Mach numbers. Comparisons of the flight data with conventional wind-tunnel data indicated a significant disagreement in drag coefficient in the transonic speed range suggestive of important sting or wall interference effects. Variations in drag coefficient with Mach number were very small hypersonically, but variations with Reynolds number were of the order of 15% at a free-stream Mach number of 13 over the Reynolds number range from 10,000 to 1,000,000. Variations in the lift and static-stability curves with Mach number and Reynolds number were also defined.

Sammonds, R. I.↗

Spectroscopic observations of winds on Venus. I - Technique and data reduction

Methods of measurement and reduction of high-dispersion photographic spectra of Venus are presented. Preliminary results are consistent with slow direct or no rotation at the level sample, and disagree strongly with a 4-day retrograde rotation. A serious systematic error, which affects much published work, is due to blending of solar lines in the sky with those reflected from the planet. This always tends to produce a spurious retrograde 'rotation'. Only data obtained in a dark sky, or daytime observations from which the sky lines have been accurately subtracted, can be relied upon. All such data give low wind speeds.

Young, A. T.↗

NASA plans for spaceborne lidar - The Earth Observing System

The use of laser techniques to observe the earth's atmosphere and surface from space is examined. An Earth Observing System is proposed as the platform for performing lidar observations. The objectives and capabilities of the Lidar Atmospheric Sounder and Altimeter (LASA) are described. The measurement techniques for collecting temperature, pressure, and water vapor profiles, the vertical distribution of ozone in the stratosphere and troposphere, and atmospheric particulates profiles are discussed. The LASA requirements for altimetry and retroranging are considered. The Doppler Lidar Wind Sensor which provides data on wind velocity is analyzed. These laser systems with increased spatial resolution and accuracy form an efficient information system for studying earth science developments.

Curran, R. J.↗

Laser velocimeter data acquisition system for the Langley 14- by 22-foot subsonic tunnel. Software reference guide version 3.3

The Laser Velocimeter Data Acquisition System (LVDAS) in the Langley 14- by 22-Foot Tunnel is controlled by a comprehensive software package. The software package was designed to control the data acquisition process during wind tunnel tests which employ a laser velocimeter measurement system. This report provides detailed explanations on how to configure and operate the LVDAS system to acquire laser velocimeter and static wind tunnel data.

Jumper, Judith K.↗

Estimation of Static Longitudinal Stability of Aircraft Configurations at High Mach Numbers and at Angles of Attack Between 0 deg and +/-180 deg

The possibility of obtaining useful estimates of the static longitudinal stability of aircraft flying at high supersonic Mach numbers at angles of attack between 0 and +/-180 deg is explored. Existing theories, empirical formulas, and graphical procedures are employed to estimate the normal-force and pitching-moment characteristics of an example airplane configuration consisting of an ogive-cylinder body, trapezoidal wing, and cruciform trapezoidal tail. Existing wind-tunnel data for this configuration at a Mach number of 6.86 provide an evaluation of the estimates up to an angle of attack of 35 deg. Evaluation at higher angles of attack is afforded by data obtained from wind-tunnel tests made with the same configuration at angles of attack between 30 and 150 deg at five Mach numbers between 2.5 and 3.55. Over the ranges of Mach numbers and angles of attack investigated, predictions of normal force and center-of-pressure locations for the configuration considered agree well with those obtained experimentally, particularly at the higher Mach numbers.

Dugan, Duane W.↗

Applied Meteorology Unit (AMU) Quarterly Report

This Quarter's Highlights include reports on the following tasks: (1) Mr. Wheeler completed a study for the 30th Weather Squadron at Vandenberg Air Force Base in California in which he found precursors in weather observations that will help the forecasters determine when they will get strong wind gusts at their northern towers. The final report is now on the AMU website at http://science.ksc.nasa.gov/amu/final-reports/30ws-north-base-winds.pdf. (2) continued work on the second phase of verifying the performance of the MesoNAM weather model at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). (3) continued work to improve the AMU peak wind tool by analyzing wind tower data to determine peak wind behavior during times of onshore and offshore flow. (4) continued updating lightning c1imatologies for KSC/CCAFS and other airfields around central Florida and created new c1imatologies for moisture and stability thresholds.

Bauman, William↗

Summary of Propagation Cases of the Second AIAA Sonic Boom Prediction Workshop

A summary is provided for the propagation portion of the second AIAA Sonic Boom Workshop held January 8, 2017 in conjunction with the AIAA SciTech 2017 conference. Near-field pressure waveforms for two cases were supplied and ground signatures at multiple azimuthal angles as well as their corresponding loudness metrics were requested from 10 participants, representing 3 countries. Each case had some required runs, as well as some optional runs. The required cases included atmospheric profiles with measured data including winds, using Radiosonde balloon data at multiple geographically spread locations, while the optional cases included temperature and pressure profiles from the US Standard atmosphere. The humidity profiles provided for the optional cases were taken from ANSI guidance, as the authors were unaware of an accepted standard at the time the cases were released to the participants. Participants provided ground signatures along with the requested data, including some loudness metrics using their best practices, which included lossy as well as lossless schemes. All the participants' submissions, for each case, are compared and discussed. Noise or loudness measures are calculated and detailed comparisons and statistical analyses are performed and presented. It has been observed that the variation in the loudness measures and spread between participants' submissions increased as the computation proceeded from under-track locations towards the lateral cut-off. Lessons learned during this workshop are discussed and recommendations are made for potential improvements and possible subsequent workshops as we collectively attempt to refine our analysis methods.

Rallabhandi, Sriram↗

Summary of Propagation Cases of the Second AIAA Sonic Boom Prediction Workshop

A summary is provided for the propagation portion of the second AIAA Sonic Boom Workshop held January 8, 2017 in conjunction with the AIAA SciTech 2017 conference. Near-field pressure waveforms for two cases were supplied and ground signatures at multiple azimuthal angles as well as their corresponding loudness metrics were requested from 10 participants, representing 3 countries. Each case had some required, as well as some optional runs. The required cases included atmospheric profiles with measured data including winds, using Radiosonde balloon data at multiple geographically spread locations. The humidity profiles provided for the optional cases were taken from ANSI guidance, as the authors were unaware of an accepted standard at the time the cases were released to the participants. Participants provided ground signatures along with the requested data, including some loudness metrics using their best practices, which included lossy as well as lossless atmospheric propagation schemes. All the participants’ submissions, for each case, are compared and discussed. Noise or loudness measures are calculated and detailed comparisons and statistical analyses are performed and presented. It has been observed that the variation in the loudness measures and spread between participants’ submissions increased as the computation proceeded from under-track locations towards the lateral cut-off. Lessons learned during this workshop are discussed and recommendations are made for potential improvements and possible subsequent workshops as we collectively attempt to refine our analysis methods.

Rallabhandi, Sriram↗

Estimation of Large-Scale Wind Field Characteristics Using Supervisory Control and Data: Preprint

As the wind energy industry continues to pushfor increased power production and lower cost of energy, thefocus of research has expanded from individual turbines toentire wind farms. Among a host of interesting problems to besolved when considering the wind farm as a whole, we considerthe challenge of scalar field estimation, based on informationalready collected at the individual turbine level. We aim toestimate the large-scale, low-frequency characteristics of thewind field, such as the mean wind direction and the overalldecrease in wind speed across the farm, and employ a Kalmanfilter that models the wind field using a polynomial function.We compare the proposed method’s performance to both asimple averaging technique and filtering of individual turbinemeasurements. The method presented is not limited to windturbines and is applicable in other situations where multipleremote agents are used to estimate a scalar field.

large scale↗