Search NASA⌕ Search

SEARCH · Search NASA

Results for “Atomic Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Quasiparticles in Raman scattering of an electromagnetic wave by an atomic condensate

Raman scattering of an intense electromagnetic wave by a free atomic Bose condensate is considered. In a system of atoms and photons, a subsystem is separated whose dynamics can be naturally described in terms of quasiparticles: quasi-atoms and quasi-photons. The dispersion laws of quasiparticles are interrupted by the instability interval. The introduction of quasiparticles within this interval is impossible, while dispersion laws that are continued formally acquire imaginary components. The dynamic scattering model is generalized by including dissipative annihilation processes of scattered photons and uncondensed atoms. A stationary solution of the corresponding quantum control equation is found, allowing the calculation of momentum distributions of real particles and quasiparticles. The outlook for the experimental detection of quasiparticles is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electrochemical Control of Copper Intercalation into Nanoscale Bi 2 Se 3

Intercalation of exotic atoms or molecules into the layered materials remains an extensively investigated subject in current physics and chemistry. However, traditionally melt-growth and chemical interaction strategies are either limited by insufficiency of intercalant concentrations or destitute of accurate controllability. Here, we have developed a general electrochemical intercalation method to efficaciously regulate the concentration of zerovalent copper atoms into layered Bi 2 Se 3 , followed by comprehensive experimental characterization and analyses. Up to 57% copper atoms (Cu 6.7 Bi 2 Se 3 ) can be intercalated with no disruption to the host lattice. Meanwhile the unconventional resistance dip accompanied by a hysteresis loop below 40 K, as well as the emergence of new Raman peak in Cu x Bi 2 Se 3 , is a distinct manifestation of the interplay between intercalated Cu atoms with Bi 2 Se 3 host. Furthermore, our work demonstrates a new methodology to study fundamentally new and unexpected physical behaviors in intercalated metastable materials.

36 MATERIALS SCIENCE↗

Adaptive spacetime method using Riemann jump conditions for coupled atomistic-continuum dynamics

We combine the Spacetime Discontinuous Galerkin (SDG) method for elastodynamics with the mathematically consistent Atomistic Discontinuous Galerkin (ADG) method in a new scheme that concurrently couples continuum and atomistic models of dynamic response in solids. The formulation couples non-overlapping continuum and atomistic models across sharp interfaces by weakly enforcing jump conditions, for both momentum balance and kinematic compatibility, using Riemann values to preserve the characteristic structure of the underlying hyperbolic system. Momentum balances to within machine-precision accuracy over every element, on each atom, and over the coupled system, with small, controllable energy dissipation in the continuum region that ensures numerical stability. When implemented on suitable unstructured spacetime grids, the continuum SDG model offers linear computational complexity in the number of elements and powerful adaptive analysis capabilities that readily bridge between atomic and continuum scales in both space and time. A special trace operator for the atomic velocities and an associated atomistic traction field enter the jump conditions at the coupling interface. The trace operator depends on parameters that specify, at the scale of the atomic spacing, the position of the coupling interface relative to the atoms. In a key finding, we demonstrate that optimizing these parameters suppresses spurious reflections at the coupling interface without the use of non-physical damping or special boundary conditions. We formulate the implicit SDG-ADG coupling scheme in up to three spatial dimensions, and describe an efficient iterative solution scheme that outperforms common explicit schemes, such as the Velocity Verlet integrator. Numerical examples, in 1dxtime and employing both linear and nonlinear potentials, demonstrate the performance of the SDG-ADG method and show how adaptive spacetime meshing reconciles disparate time steps and resolves atomic-scale signals in the continuum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atom-by-Atom Direct Writing

Direct-write processes enable the alteration or deposition of materials in a continuous, directable, sequential fashion. Here, in this work, we demonstrate an electron beam direct-write process in an aberration-corrected scanning transmission electron microscope. This process has several fundamental differences from conventional electron-beam-induced deposition techniques, where the electron beam dissociates precursor gases into chemically reactive products that bond to a substrate. Here, we use elemental tin (Sn) as a precursor and employ a different mechanism to facilitate deposition. The atomic-sized electron beam is used to generate chemically reactive point defects at desired locations in a graphene substrate. Temperature control of the sample is used to enable the precursor atoms to migrate across the surface and bond to the defect sites, thereby enabling atom-by-atom direct writing.

36 MATERIALS SCIENCE↗

Synthesis of core/shell nanocrystals with ordered intermetallic single-atom alloy layers for nitrate electroreduction to ammonia

Structurally ordered intermetallic nanocrystals (NCs) and single-atom catalysts (SACs) are two emerging catalytic motifs for sustainable chemical production and energy conversion. However, both have synthetic limitations which can lead to the aggregation of NCs or metal atoms. Single-atom alloys (SAAs), which contain isolated metal atoms in a host metal, can overcome the aggregation concern because of the thermodynamic stabilization of single atoms on host metal surfaces. We report a direct solution-phase synthesis of Cu/CuAu core/shell NCs with tunable SAA layers. This synthesis can be extended to other Cu/CuM (M = Pt, Pd) systems, in which M atoms are isolated in the copper host. Using this method, the density of SAAs on a copper surface can be controlled, resulting in both low and high densities of single atoms. Alloying gold into the copper matrix introduced ligand effects that optimized the chemisorption of *NO 3 and *N. As a result, the densely packed Cu/CuAu material demonstrated a high selectivity toward NH 3 from the electrocatalytic nitrate reduction reaction with an 85.5% Faradaic efficiency while maintaining a high yield rate of 8.47 mol h -1 g -1 . This work advances the design of atomically precise catalytic sites by creating core/shell NCs with SAA atomic layers, opening an avenue for broad catalytic applications.

36 MATERIALS SCIENCE↗

Atomic-Level Sculpting of Crystalline Oxides: Toward Bulk Nanofabrication with Single Atomic Plane Precision

We demonstrate atomic-level sculpting of 3D crystalline oxide nanostructures from metastable amorphous layer in a scanning transmission electron microscope (STEM). Strontium titanate nanostructures grow epitaxially from the crystalline substrate following the beam path. This method can be used for fabricating crystalline structures as small as 1-2 nm and the process can be observed in situ with atomic resolution. We further demonstrate fabrication of arbitrary shape structures via control of the position and scan speed of the electron beam. Combined with broad availability of the atomic resolved electron microscopy platforms, these observations suggest the feasibility of large scale implementation of bulk atomic-level fabrication as a new enabling tool of nanoscience and technology, providing a bottom-up, atomic-level complement to 3D printing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamical crossover between the infinite-volume and empty-lattice limits of ultra-cold fermions in 1D optical lattices

Unlike typical condensed-matter systems, ultra-cold atoms loaded into optical lattices allow separate control of both the particle number and system size. As a consequence, there are two distinct "thermodynamic” limits that can be defined for these systems: i) ’’infinite-volume limit” at constant finite density, and ii) "empty-lattice limit” at constant particle number. To probe the difference between these two limits and their crossover, we consider a partially occupied lattice and study the transport into the unoccupied region of non-interacting fermions and fermions interacting at the mean-field level. In the infinite-volume limit, a finite steady-state current emerges. On the other hand, in the empty-lattice limit there is no finite steady-state current. By changing the initial filling, we find a smooth crossover between the two limits. Our predictions may be verified using available experimental tools and demonstrate a fundamental difference between isolated small systems such as ultra-cold atoms and conventional condensed-matter systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Field-ionization threshold and its induced ionization-window phenomenon for Rydberg atoms in a short single-cycle pulse

We study the field-ionization threshold behavior when a Rydberg atom is ionized by a short single-cycle pulse field. Both hydrogen and sodium atoms are considered. The required threshold field amplitude is found to scale inversely with the binding energy when the pulse duration becomes shorter than the classical Rydberg period, and, thus, more weakly bound electrons require larger fields for ionization. This threshold scaling behavior is confirmed by both three-dimensional classical trajectory Monte Carlo simulations and numerically solving the time-dependent Schrödinger equation. More surprisingly, the same scaling behavior in the short pulse limit is also followed by the ionization thresholds for much lower bound states, including the hydrogen ground state. An empirical formula is obtained from a simple model, and the dominant ionization mechanism is identified as a nonzero spatial displacement of the electron. Here, this displacement ionization should be another important mechanism beyond the tunneling ionization and the multiphoton ionization. In addition, an “ionization window” is shown to exist for the ionization of Rydberg states, which may have potential applications to selectively modify and control the Rydberg-state population of atoms and molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Realization of low frequency and controllable-bandwidth squeezing based on a four-wave-mixing amplifer in rubidium vapor

We experimentally demonstrate the creation of two correlated beams generated by a nondegenerate four-wave-mixing amplifier at {lambda} = 795 nm in hot rubidium vapor. We achieve intensity difference squeezing at frequencies as low as 1.5 kHz which is so far the lowest frequency to observe squeezing in an atomic system. The squeezing spans from 5.5 to 16.5 MHz with a maximum squeezing of {approx}5 dB at 1 MHz. We can control the squeezing bandwidth by changing the pump power. Both low frequency and controllable bandwidth squeezing show great potential in sensitivity detection and precise control of the atom optics measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Revealing and Elucidating ALD-Derived Control of Lithium Plating Microstructure

The practical implementation of Li metal batteries is hindered by difficulties in controlling the Li metal plating microstructure. While previous atomic layer deposition (ALD) studies have focused on directly coating Li metal with thin films for the passivation of the electrode–electrolyte interface, a different approach is adopted, situating the ALD film beneath Li metal and directly on the copper current collector. Here, a mechanistic explanation for this simple strategy of controlling the Li metal plating microstructure using TiO 2 grown on copper foil by ALD is presented. In contrast to previous studies where ALD-grown layers act as artificial interphases, this TiO 2 layer resides at the copper–Li metal interface, acting as a nucleation layer to improve the Li metal plating morphology. Upon lithiation of TiO 2 , a Li x TiO 2 complex forms; this alloy provides a lithiophilic surface layer that enables uniform and reversible Li plating. The reversibility of lithium deposition is evident from the champion cell (5 nm TiO 2 ), which displays an average Coulombic efficiency (CE) of 96% after 150 cycles at a moderate current density of 1 mA cm –2 . This simple approach provides the first account of the mechanism of ALD-derived Li nucleation control and suggests new possibilities for future ALD-synthesized nucleation layers.

25 ENERGY STORAGE↗

Understanding the Properties and Structure of Metallic Glasses at the Atomic Level

Liquids and glasses have been well known to human kind for millennia. And yet major mysteries remain in the behavior of glasses and liquids at the atomic level, and identifying the microscopic mechanisms that control the properties of glasses is one of the most challenging unsolved problems in physical sciences. For this reason, applying simplistic approaches to explain the behavior of metallic glasses can lead to serious errors. On the other hand because metallic glasses are atomic glasses with relatively simple structure, they may offer better opportunities to advance our fundamental understanding on the nature of the glass. The difficulties inherent to the problem and some recent advances are reviewed here.

36 MATERIALS SCIENCE↗

Contribution of Near Threshold States to Recombination in Plasmas

Resonance states in atoms or ions at low energies can control the rates of important plasma processes (e.g., dielectronic recombination). We examine the role of states at negative energies just below the ionization threshold of the recombined system and find that they can contribute as much, or more, to recombination as positive energy states. In plasmas, negative energy states can be populated by three body recombination, photorecombination, or continuum lowering. Properly including these negative energy states in a theoretical treatment of plasma processes can change the thermally averaged rate coefficients and, in some cases, removes much of the sensitivity to the energy of a state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photonic crystals for nano-light in moiré graphene superlattices

Graphene is an atomically thin plasmonic medium that supports highly confined plasmon polaritons, or nano-light, with very low loss. Electronic properties of graphene can be drastically altered when it is laid upon another graphene layer, resulting in a moiré superlattice. The relative twist angle between the two layers is a key tuning parameter of the interlayer coupling in thus-obtained twisted bilayer graphene (TBG). We studied the propagation of plasmon polaritons in TBG by infrared nano-imaging. We discovered that the atomic reconstruction occurring at small twist angles transforms the TBG into a natural plasmon photonic crystal for propagating nano-light. This discovery points to a pathway for controlling nano-light by exploiting quantum properties of graphene and other atomically layered van der Waals materials, eliminating the need for arduous top-down nanofabrication.

charge transport↗

Strong electrostatic adsorption of Pt onto SiO 2 partially overcoated Al 2 O 3 —Towards single atom catalysts

It is frequently desired to synthesize supported metal catalysts that consist of very small clusters or single atoms. In this work, we combine strong electrostatic adsorption (SEA) of H 2 PtCl 6 and engineered oxide supports to ultimately produce very small Pt clusters, including a large fraction of single Pt atoms. The supports are synthesized by depositing controlled amounts of SiO 2 onto Al 2 O 3 (SiO 2 @Al 2 O 3 ) that has been previously grafted with bulky organic templates. After the templates are removed, the oxide supports are largely negatively charged, like SiO 2 , but have small patches of positively charged Al 2 O 3 , derived from the regions previously covered by the template. The overall point of zero charge of these materials decreases from pH 6.4 for 1 cycle of SiO 2 deposition to a SiO 2 -like <2 for materials with more than 5 cycles of SiO 2 deposition. SEA at pH 4 on templated SiO 2 @Al 2 O 3 deposits from 1 wt. % to 0.05 wt. % Pt as the amount of SiO2 increases. Pt loadings drop to near zero in the absence of a template. The resulting Pt nanoparticles are generally <1 nm and have dispersion near 100% by CO chemisorption. Finally, CO DRIFTS shows that the CO nanoparticles become increasingly well defined and have a higher percentage of Pt single atoms as the amount of SiO 2 increases on the SiO 2 @Al 2 O 3 particles. Overall, this method of synthesizing patches of charge on a carrier particle appears to be a viable route to creating extremely highly dispersed supported metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arbitrary control of coherent dynamics for distant qubits in a quantum network

We show that the coherent coupling of atomic qubits at distant nodes of a quantum network, composed of several cavities linked by optical fibers, can be arbitrarily controlled via the selective pairing of Raman transitions. The adiabatic elimination of the atomic excited states and photonic states leads to selective qubit-qubit interactions, which would have important applications in quantum-information processing. Quantum gates between any pair of distant qubits and parallel two-qubit operations on selected qubit pairs can be implemented through suitable choices of the parameters of the external fields. Selective pairing of Raman transitions also allows the generation of spin chains and cluster states without the requirement that the cavity-fiber coupling be smaller than the detunings of the Raman transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Frictionless atom cooling in harmonic traps: A time-optimal approach

In this article we formulate frictionless atom cooling in harmonic traps as a time-optimal control problem, permitting imaginary values of the trap frequency for transient time intervals during which the trap becomes an expulsive parabolic potential. We show that the minimum time solution has a ''bang-bang'' form, where the frequency jumps suddenly at certain instants and then remains constant, and calculate estimates of the minimum cooling time for various numbers of such jumps. A numerical optimization method based on pseudospectral approximations is used to obtain suboptimal realistic solutions without discontinuities, which may be implemented experimentally.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Reconstruction in Hydrated Amphiphilic Block Copolymer Thin Films Probed by Fluid Cell Atomic Force Microscopy

In many thin film materials, nuanced interplays of interfacial energies control the surface morphology and rearrangement. This work evaluates polymer−solvent interactions and solvent-driven surface reconstructions via ex situ and in situ fluid cell Atomic Force Microscopy (fc-AFM) analysis of amphiphilic block copolymer (BCP) thin films upon exposure to deionized (DI) water. We examine the differences in surface morphology, whole-film swelling, and force response in thin films of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) and polystyrene- block-poly[(allyl glycidyl ether)-co-(ethylene oxide)] (PS-b- P[AGE-co-EO]) processed into standing-up cylinder morphologies perpendicular to a silicon substrate (⊥C). Using Amplitude Modulation AFM (AM-AFM) and Amplitude-Phase Distance (APD) force spectroscopy, this work probes the mechanoresponsive nature of the dynamic surface layers of these films, unveiling surface layer stratification and surface chain rearrangement via minimal tip−sample stimulation. To help rationalize the observed reconfigurations, the energetic driving forces were estimated using the harmonic mean approximations of interfacial energies. Given the nonionizable nature of the minority P(AGE-co-EO) block and the energetic driving forces for chain mobility, this work shows how the elimination of unfavorable PS−water interfaces drives chain rearrangement and coverage of the PS surface by chains of the hydrophilic block. This work highlights considerations for increasing the heterogeneity and complexity of BCP thin films via random blocks and how those changes to local interfacial energies may drive larger scale film morphology reconstructions, with broader implications for tuning interface hydrophilicity.

Copolymers↗

Optimal Ge/SiGe nanofin geometries for hole mobility enhancement: Technology limit from atomic simulations

We use first principles simulations to engineer Ge nanofins for maximum hole mobility by controlling strain tri-axially through nano-patterning. Large-scale molecular dynamics predict fully relaxed, atomic structures for experimentally achievable nanofins, and orthogonal tight binding is used to obtain the corresponding electronic structure. Hole transport properties are then obtained via a linearized Boltzmann formalism. This approach explicitly accounts for free surfaces and associated strain relaxation as well as strain gradients which are critical for quantitative predictions in nanoscale structures. We show that the transverse strain relaxation resulting from the reduction in the aspect ratio of the fins leads to a significant enhancement in phonon limited hole mobility (7× over unstrained, bulk Ge, and 3.5× over biaxially strained Ge). Maximum enhancement is achieved by reducing the width to be approximately 1.5 times the height and further reduction in width does not result in additional gains. These results indicate significant room for improvement over current-generation Ge nanofins, provide geometrical guidelines to design optimized geometries and insight into the physics behind the significant mobility enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗