Search NASA⌕ Search

SEARCH · Search NASA

Results for “CS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Ion Exchange Processing of AP-105 Hanford Tank Waste through Crystalline Silicotitanate in a Staged 2- then 3-Column System (Rev.1)

The Tank Side Cesium Removal (TSCR) system, under development by Washington River Protection Solutions LLC (WRPS), will send initial low-activity Hanford waste tank supernate feeds to the Hanford Waste Treatment and Immobilization Plant (WTP) Low-Activity Waste (LAW) Facility. In addition to entrained solids removal from the supernate, the primary goal of TSCR is to remove cesium-137 ( 137 Cs) by ion exchange, allowing contact handling of the liquid effluent product at the WTP. Crystalline silicotitanate (CST) ion exchange media, manufactured by Honeywell UOP, LLC (product IONSIVTM R9140-B), was selected as the ion exchange media at TSCR. CST is a non-elutable inorganic material that has demonstrated robust chemical, physical, and radiation tolerance while maintaining functionality. However, exchange kinetics of Cs onto CST is slow, resulting in low utilization of the CST Cs load capacity before unacceptable Cs breakthrough. Two process flow designs have been tested, as follows. 1. Lead-lag column processing: The lead column was removed after the lag column effluent reached the waste acceptance criteria (WAC) limit, the lag column was moved into the lead position, and a new lag column was installed. This format used ~52% Cs load capacity on the lead column. 2. Lead-lag-polish column processing: The processing was stopped when the polish column effluent reached the WAC limit. This format resulted in 81% Cs load capacity on the lead column. Testing with diluted feed from Hanford tank AP-105 (AP-105DF) incorporated a nuanced change to the lead-lag-polish column system where the polish column was inserted when the lag column effluent reached WAC limit. A 10.9-L volume of AP-105DF (diluted to 5.6 M Na) was processed through the Direct Feed Test Platform system, established at Pacific Northwest National Laboratory to support small-scale waste qualification efforts. The columns consisted of 10-mL CST beds (CST Lot 2002009604, sieved to screen out >30-mesh particles) placed in 1.5-cm-inner-diameter columns. Feed was processed at 1.83 bed volumes (BV) per hour; the flowrate, in terms of contact time with the CST bed, matched the expected flowrate at TSCR. The <30-mesh CST sieve cut was expected to provide appropriate performance scaling to a full-height column. The installation of the polish column later in processing (after processing 523 BVs) did not appear to fundamentally change the utilization of the lead column for Cs exchange nor did it extend the total feed processing volume when compared to the previous test with AP-107 feed. Table ES.1 and Figure ES.1 summarize the measured AP-105DF Cs load performance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Community Solar and Community Solar+Storage: A Roadmap of Barriers and Solutions for Commercial Systems in NYC

Sustainable CUNY worked with decision makers and subject matter experts (SME's) to identify the barriers to and solutions for advancing commercial Community Solar (CS) and CS+Storage (CS+S) in urban areas. This roadmap captures the key challenges and solutions identified by New York City (NYC) stakeholders, including the Real Estate Board of New York (REBNY), through a collaborative process. Solar, as well as storage, are among the fastest growing energy segments in the United States, with CS, also known as Community Distributed Generation (CDG), gaining popularity with those who may not own or have access to a viable roof. Urban areas like NYC, which have a large population of renters, are particularly well suited for CS projects where credits from the power produced by a large remote installation are offered on a subscription basis to residents or businesses in the community. However, CS and CS+S projects have stalled at the doorstep of many cities. Host site owners, particularly those with large rooftops, have been slow to commit to installing CS due to competing rooftop usage and programs, limited knowledge about incentives, lack of economic data, and a complicated implementation process.

14 SOLAR ENERGY↗

Thin Silicon MEMS Contact-Stress Sensor

This thin, MEMS contact-stress (CS) sensor continuously and accurately measures time-varying, solid interface loads in embedded systems over tens of thousands of load cycles. Unlike all other interface load sensors, the CS sensor is extremely thin (< 150 {micro}m), provides accurate, high-speed measurements, and exhibits good stability over time with no loss of calibration with load cycling. The silicon CS sensor, 5 mm{sup 2} and 65 {micro}m thick, has piezoresistive traces doped within a load-sensitive diaphragm. The novel package utilizes several layers of flexible polyimide to mechanically and electrically isolate the sensor from the environment, transmit normal applied loads to the diaphragm, and maintain uniform thickness. The CS sensors have a highly linear output in the load range tested (0-2.4 MPa) with an average accuracy of {+-} 1.5%.

42 ENGINEERING↗

Coherent structures - Reality and myth

Large-scale coherent structures (CS) in turbulent shear flows are characterized, reviewing recent theoretical and experimental investigations. The use of computers as a research tool and the flow-visualization experimental technique are introduced, CS are defined, the history of their discovery is traced, and their main characteristics are listed. Topics discussed and illustrated include the initial condition of the free shear layer, triple and double decomposition, topological features of CS, detection and eduction of CS, phase alignment via cross correlation, induced versus natural structures, the bursting phenomenon, turbulent spot, streaks, bursting frequency, the axisymmetric mixing layer, vortex pairing in an axisymmetric jet, CS and jet noise, broadband noise amplification via pure-tone excitation, CS interaction in a plane-jet near field, the Taylor hypothesis applied to CS, negative production, and the validity of the Reynolds-number similarity hypothesis. It is found that the coherent Reynolds stress, vorticity, and production are not much greater than the time-averaged values for fully developed flows with significant incoherent turbulence, suggesting that the importance of CS may have been exaggerated in some recent studies.

Hussain, A. K. M. F.↗

Using Combustion Synthesis to Reinforce Berms and Other Regolith Structures

The Moonraker Excavator and other tools under development for use on the Moon, Mars, and asteroids will be employed to construct a number of civil engineering projects and to mine the soil. Mounds of loose soil will be subject to the local transport mechanisms plus artificial mechanisms such as blast effects from landers and erosion from surface vehicles. Some of these structures will require some permanence, with a minimum of maintenance and upkeep. Combustion Synthesis (CS) is a family of processes and techniques whereby chemistry is used to transform materials, often creating flame in a hard vacuum. CS can be used to stabilize civil engineering works such as berms, habitat shielding, ramps, pads, roadways, and the like. The method is to unroll thin sheets of CS fabric between layers of regolith and then fire the fabric, creating a continuous sheet of crusty material to be interposed among layers of loose regolith. The combination of low-energy processes, ISRU (in situ resource utilization) excavator, and CS fabrics, seems compelling as a general method for establishing structures of some permanence and utility, especially in the role of robotic missions as precursors to manned exploration and settlement. In robotic precursory missions, excavator/ mobility ensembles mine the Lunar surface, erect constructions of soil, and dispense sheets of CS fabrics that are covered with layers of soil, fired, and then again covered with layers of soil, iterating until the desired dimensions and forms are achieved. At the base of each berm, for example, is a shallow trench lined with CS fabric, fired and filled, mounded, and then covered and fired, iteratively to provide a footing against lateral shear. A larger trench is host to a habitat module, backfilled, covered with fabric, covered with soil, and fired. Covering the applied CS fabric with layers of soil before firing allows the resulting matrix to incorporate soil both above and below the fabric ply into the fused layer, developing a very irregular surface which, like sandpaper, can provide an anchor for loose soil. CS fabrics employ a coarse fiberglass weave that persists as reinforcement for the fired material. The fiberglass softens at a temperature that exceeds the combustion temperature by factors of two to three, and withstands the installation process. This type of structure should be more resistant to rocket blast effects from Lunar landers.

Rodriquez, Gary↗

Development of Zeolite Nonwoven for the Adsorption of Radioactive Cesium - 13288

The zeolite nonwoven fabric produced by TDS (Totally Dry System) process has some advantages such as the control of zeolite content, flexibility, strength and water-resistant property depending on the purpose. Hence the zeolite nonwoven fabric is expected for the application in various fields of the decontamination of Cs-contaminated water. In this study, Cs adsorption properties of zeolite nonwoven fabrics were examined by batch experiments, and the radiation stability, thermal stability and chemical durability were evaluated. As for batch adsorption properties, relatively large uptake rate of Cs{sup +} was obtained; the uptake equilibrium attained within 20 min and the uptake (%) was above 95%. The differences in zeolite content had no effects on the Cs{sup +} uptake (%). The uptake (%) of Cs{sup +} in seawater was slightly lowered compared to that in the presence of HNO{sub 3}. The uptake (%) of Cs{sup +} in seawater was estimated to be above 90% after 2 h-shaking, indicating the considerable enhancement of uptake rate compared to the conventional granular zeolites. The uptake (%) of Cs{sup +} for the zeolite high content type was estimated to be above 99% by using {sup 137}Cs tracer. As for the comparison of sealing treatment, the uptake (%) for the zeolite sheet treated with edge sealing was larger than that with rapping treatment. The uptake (%) for the zeolite sheet (zeolite high content type) was estimated to be about 95%, which is independent of sealing treatment and NaOH concentration. As for the stability, the surface morphology and the structure of zeolite sheet were not altered by the treatment with acid and alkaline solutions under the experimental conditions. The zeolite sheets were also stable after {sup 60}Co-γ ray irradiation up to 7.01x10{sup 6} R. On the other hand, color change for both fiber and zeolite and the shrinkage of the fiber were observed after heat treatment at 150 deg. C for 2 h. Thus the considerable enhancement of adsorption properties was observed by using zeolite nonwoven fabrics compared to the conventional granular zeolites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Case Study Correlating Innovative Gamma Ray Scanning Detection Systems Data to Surface Soil Gamma Spectrometry Results - 13580

HydroGeoLogic (HGL), Inc. completed a United States Environmental Protection Agency (USEPA) study to characterize radiological contamination at a site near Canoga Park, California. The characterized area contained 470 acres including the site of a prototype commercial nuclear reactor and other nuclear design, testing, and support operations from the 1950's until 1988 [1]. The site history included radiological releases during operation followed by D and D activities. The characterization was conducted under an accelerated schedule and the results will support the project remediation. The project has a rigorous cleanup to background agenda and does not allow for comparison to risk-based guidelines. To target soil sample locations, multiple lines of evidence were evaluated including a gamma radiation survey, geophysical surveys, historical site assessment, aerial photographs, and former worker interviews. Due to the time since production and decay, the primary gamma emitting radionuclide remaining is cesium-137 (Cs-137). The gamma ray survey covered diverse, rugged terrain using custom designed sodium iodide thallium-activated (NaI(Tl)) scintillation detection systems. The survey goals included attaining 100% ground surface coverage and detecting gamma radiation as sensitively as possible. The effectiveness of innovative gamma ray detection systems was tested by correlating field Cs-137 static count ratios to Cs-137 laboratory gamma spectrometry results. As a case study, the area encompassing the former location of the first nuclear power station in the U. S. was scanned, and second by second global positioning system (GPS)-linked gamma spectral data were evaluated by examining total count rate and nuclide-specific regions of interest. To compensate for Compton scattering from higher energy naturally occurring radionuclides (U-238, Th-232 and their progeny, and K-40), count rate ratios of anthropogenic nuclide-specific regions of interest to the total count rate were calculated. From the scanning data, locations with observed Cs-137 ratios exceeding six standard deviations above the mean ratio were mapped in high resolution [2]. Field teams returned to those locations to collect static count measurements using the same detection systems. Soil surface samples were collected at 30 locations and analyzed for Cs-137. An exponential correlation was identified between Cs-137 concentrations in surface soil and field-scanned Cs-137 ratios. The data indicate field minimum detectable concentration (MDC) of Cs-137 at 0.02 Bq/g (0.5 pCi/g) or lower depending on contaminant distribution in soil. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Behavior of Radioactive Cesium in Municipal Solid Waste of Thermal Treatment Plants after Fukushima Nuclear Power Plant Accident - 16626

Municipal solid waste (MSW) contaminated by radioactive cesium (r-Cs) has been treated by various thermal treatment facilities in Japan. However, the behavior of r-Cs in their plants is scarcely known. Therefore, we investigated 4 types of the thermal treatment plants to understand the r-Cs behavior during different thermal treatments of the MSW. The distribution of r-Cs between residue discharged from bottom of furnace (bottom ash, non-combustibles or slag) and fly ash was affected by furnace type. The leaching rate of r-Cs from the fly ash and the bottom residues were measured. The leaching rate from the former was high and ranged from 40 to 100%. In contrast, the most of r-Cs in the latter did not dissolve into water. Furthermore, we evaluated whether baghouse (an air-pollution control equipment) successfully removed r-Cs compound in flue gas. R-Cs was efficiently removed regardless of thermal treatment type. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Economic Feasibility Analysis and Engineering System Design Development of Novel Cesium Adsorbents - 18680

Potassium copper hexacyanoferrate-cellulose hydrogel composites (HCF-gels) and potassium copper hexacyanoferrate-embedded poly-citric acid hydrogel film (HPC) were synthesized. In Cs{sup +} removal experiments, HCF-gels exhibited exceptional Cs{sup +} adsorption capacities 2.06-2.32 mmol g{sup -1}. HPC showed a very high Cs{sup +} uptake of 667 mg/g KCuHCF. The adsorbents revealed stable and high Cs{sup +} removal efficiency across a wide pH range. Notably, the adsorbents could adsorb Cs{sup +} selectively in seawater containing Cs{sup +}. The combination of testing and radiation stability results indicated that the performance of the materials are maintained whether irradiated or not. The cost of the HCF-gels and HPC were estimated approximately 13.0055 $/kg and 38.2490 $/kg respectively. This is reasonable cost compared to commercialized Cs{sup +} adsorbents. New pool scrubbing system is designed for engineering system design to apply novel Cs{sup +} adsorbents under severe accident condition. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Corrosion of Carbon Steel Inside Used Nuclear Fuel Containers - 19492

This paper presents an overview of the carbon steel (CS) corrosion research being conducted by the Radiation Assisted Materials Performance Science (RAMPS) group at Western University, in collaboration with the Canadian Nuclear Waste Management Organization (NWMO) and Canada Natural Science and Engineering Research Council (NSERC). The objective of our studies is to develop a high-fidelity CS corrosion dynamic model that can be used to assess the integrity of the current Canadian used fuel container (UFC) design with confidence. Our key findings, the implications of the findings on corrosion science in general, and the potential consequences of these results on the predictions for long-term UFC integrity are described. Results are presented on the following five themes: chemical kinetics of γ-radiolysis of liquid water and humid air, aqueous corrosion of CS under γ-radiation, corrosion of CS under small water volumes and water filled gaps, Liesegang ring formation in a gel medium, and radiation-induced iron oxide nanoparticle formation from dissolved metal ions. These studies together represent a detailed and integrated examination of the whole CS corrosion system, and in particular, its behaviour under γ-radiation. The key finding of this research is that under certain conditions, the CS corrosion system can exhibit non-linear dynamic behaviours - which can be seen in periodic precipitation patterns and oscillations in measurable system properties such as corrosion potential. This throws into question existing corrosion models that do not account for these types of behaviours. We describe the preliminary steps we have taken in integrating these new understandings into a CS corrosion dynamic model that will be able to make long-term predictions of CS corrosion in the UFC environment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Long Term Assessment of Radiocesium in Deer, Fish, Soil, and Vegetation at the Savannah River Site

Throughout the Savannah River Site's (SRS) operational history, many radionuclides have been released into the environment. However, due to fallout from weapons testing, the amount released from SRS, its persistence in the environment, and the seclusion of the Site, radiocesium (Cs-137) is one of the most critical radionuclides in the SRS environment. The Effective half-life (Te) is the time it takes for a radionuclide in the environment to decrease by 50% of its initial amount. There are three means of radionuclide removal: Physical: Radioactive decay, sedimentation, and washout; Chemical: Changes in pH, oxidation state or adsorption; Biological: Changes in the food web or translocation. Effective half-life (T{sub e}) = log{sub e}2/λ{sub e} Where λ{sub e} is estimated from the slopes of loge-transformed Cs-137 activity concentrations regressed on year. The objective of this work was to calculate the effective half-life of Cs-137 in various biota at SRS and to perform an assessment of the changes in the effective half life over time. Compared to 2013 data, there is a slight increase in the effective half-lives for fish at most sampling locations. This effective half-life increase is an indication that the rate of Cs-137 loss is starting to plateau. The effective half-life of Cs-137 in SRS fish ranges from 4-11 years. The effective half-life of Cs-137 in soil at the Creek plantation is about 15 years. The effective half-life of Cs-137 in grassy vegetation at the Creek Plantation is about 14 years. The effective half-life of deer hunted on the SRS is about 15.5 years. After termination of all reactor activity by 1980, the Cs-137 activity began to drop drastically.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-efficiency perovskite photovoltaic modules achieved via cesium doping

Perovskite solar modules have been attracting increasing attention due to their market potential, yet publications concerned with theintrinsic scale-up potential of different perovskite compositions remain relatively scarce. On the other hand, while great success is being made towards improving the power conversion efficiency (PCE) of perovskite solar cells (PSCs) by cesium cation (Cs + ) doping of the perovskite, more attention is being paid to the perovskite phase stabilization effect of Cs + doping, and less to other properties that are critical to understand and futher improve the PSC's. In this work, moderately-Cs-doped MAPbI 3 was employed as a model perovskite material in order to exclude the phase stabilization effect. Our systematic study revealed the influence of Cs + in organic-inorganic hybrid perovskites on the crystal structure, crystallization process, trap state density, band structure and charge (i.e., ions or photo-carriers) transport. Markedly, it has been observed that Cs + doping can greatly increase the carrier diffusion length in the perovskite films, thus improving the potential to scale-up PSC's.The PCE of small area devices (0.09 cm 2 ) was increased to 21.72% from 19.73%, with decreased hysteresis behavior and increased operational stability (T85 = 1000 h) after Cs + doped, where T85 refers to the retention of 85% of the initial PCE. Moreover, a PCE of 21.08% was obtained for a Cs + -containing perovskite module with an active area > 30 cm 2 , which demonstrates a better "reproducibility" than the reference sample (MAPbI3-based perovskite modules, PCE = 18.26%).

14 SOLAR ENERGY↗

Materials Data on Cs2Ce10Os2I17 by Materials Project

Cs2Ce10Os2I17 crystallizes in the monoclinic C2/m space group. The structure is three-dimensional. Cs is bonded to twelve I atoms to form CsI12 cuboctahedra that share corners with fourteen CeOs2I4 octahedra, edges with two equivalent CsI12 cuboctahedra, a faceface with one CsI12 cuboctahedra, and faces with six CeOsI5 octahedra. The corner-sharing octahedra tilt angles range from 35–48°. There are a spread of Cs–I bond distances ranging from 4.15–4.48 Å. There are four inequivalent Ce sites. In the first Ce site, Ce is bonded to one Os and five I atoms to form distorted CeOsI5 octahedra that share corners with two equivalent CsI12 cuboctahedra, corners with five CeOs2I4 octahedra, edges with five CeOs2I4 octahedra, and faces with two equivalent CsI12 cuboctahedra. The corner-sharing octahedra tilt angles range from 5–10°. The Ce–Os bond length is 2.78 Å. There are a spread of Ce–I bond distances ranging from 3.22–3.41 Å. In the second Ce site, Ce is bonded to one Os and five I atoms to form distorted CeOsI5 octahedra that share corners with two equivalent CsI12 cuboctahedra, corners with four CeOs2I4 octahedra, edges with five CeOs2I4 octahedra, and faces with two equivalent CsI12 cuboctahedra. The corner-sharing octahedra tilt angles range from 0–10°. The Ce–Os bond length is 2.72 Å. There are a spread of Ce–I bond distances ranging from 3.20–3.40 Å. In the third Ce site, Ce is bonded to one Os and five I atoms to form distorted CeOsI5 octahedra that share corners with three equivalent CsI12 cuboctahedra, corners with two CeOsI5 octahedra, edges with six CeOs2I4 octahedra, and a faceface with one CsI12 cuboctahedra. The corner-sharing octahedra tilt angles range from 1–9°. The Ce–Os bond length is 2.79 Å. There are a spread of Ce–I bond distances ranging from 3.18–3.42 Å. In the fourth Ce site, Ce is bonded to two equivalent Os and four I atoms to form CeOs2I4 octahedra that share corners with four equivalent CsI12 cuboctahedra, corners with three CeOs2I4 octahedra, and edges with eight CeOs2I4 octahedra. The corner-sharing octahedra tilt angles range from 0–5°. There are one shorter (2.81 Å) and one longer (2.90 Å) Ce–Os bond lengths. There are a spread of Ce–I bond distances ranging from 3.29–3.46 Å. Os is bonded to six Ce atoms to form edge-sharing OsCe6 octahedra. There are six inequivalent I sites. In the first I site, I is bonded in a 5-coordinate geometry to two equivalent Cs and three Ce atoms. In the second I site, I is bonded in a 5-coordinate geometry to two equivalent Cs and three Ce atoms. In the third I site, I is bonded in a distorted square co-planar geometry to four Ce atoms. In the fourth I site, I is bonded in a distorted rectangular see-saw-like geometry to one Cs and three Ce atoms. In the fifth I site, I is bonded in a 4-coordinate geometry to two equivalent Cs and two Ce atoms. In the sixth I site, I is bonded in a 4-coordinate geometry to one Cs and three Ce atoms.

36 MATERIALS SCIENCE↗

Materials Data on Cs7NbIn3As5 by Materials Project

Cs7NbIn3As5 crystallizes in the triclinic P-1 space group. The structure is three-dimensional. there are seven inequivalent Cs1+ sites. In the first Cs1+ site, Cs1+ is bonded in a 3-coordinate geometry to three As3- atoms. There are a spread of Cs–As bond distances ranging from 3.61–4.23 Å. In the second Cs1+ site, Cs1+ is bonded in a 3-coordinate geometry to four As3- atoms. There are a spread of Cs–As bond distances ranging from 3.68–4.12 Å. In the third Cs1+ site, Cs1+ is bonded in a 3-coordinate geometry to three As3- atoms. There are a spread of Cs–As bond distances ranging from 3.73–3.87 Å. In the fourth Cs1+ site, Cs1+ is bonded in a 5-coordinate geometry to five As3- atoms. There are a spread of Cs–As bond distances ranging from 3.56–4.05 Å. In the fifth Cs1+ site, Cs1+ is bonded in a 1-coordinate geometry to five As3- atoms. There are a spread of Cs–As bond distances ranging from 3.60–4.00 Å. In the sixth Cs1+ site, Cs1+ is bonded in a 4-coordinate geometry to four As3- atoms. There are a spread of Cs–As bond distances ranging from 3.63–4.12 Å. In the seventh Cs1+ site, Cs1+ is bonded in a 4-coordinate geometry to four As3- atoms. There are a spread of Cs–As bond distances ranging from 3.81–3.97 Å. Nb5+ is bonded in a tetrahedral geometry to four As3- atoms. There are a spread of Nb–As bond distances ranging from 2.43–2.56 Å. There are three inequivalent In1+ sites. In the first In1+ site, In1+ is bonded in a distorted T-shaped geometry to three As3- atoms. There are a spread of In–As bond distances ranging from 2.83–2.95 Å. In the second In1+ site, In1+ is bonded in a distorted T-shaped geometry to three As3- atoms. There are a spread of In–As bond distances ranging from 2.87–2.91 Å. In the third In1+ site, In1+ is bonded in a distorted T-shaped geometry to three As3- atoms. There are a spread of In–As bond distances ranging from 2.83–2.97 Å. There are five inequivalent As3- sites. In the first As3- site, As3- is bonded in a 1-coordinate geometry to six Cs1+, one Nb5+, and two In1+ atoms. In the second As3- site, As3- is bonded in a 1-coordinate geometry to five Cs1+, one Nb5+, and two In1+ atoms. In the third As3- site, As3- is bonded in a 1-coordinate geometry to four Cs1+, one Nb5+, and two In1+ atoms. In the fourth As3- site, As3- is bonded in a 9-coordinate geometry to six Cs1+ and three In1+ atoms. In the fifth As3- site, As3- is bonded in a 1-coordinate geometry to seven Cs1+ and one Nb5+ atom.

36 MATERIALS SCIENCE↗

Materials Data on CsBaMg6 by Materials Project

CsBaMg6 crystallizes in the orthorhombic Amm2 space group. The structure is three-dimensional. Cs is bonded to two equivalent Ba and ten Mg atoms to form distorted CsBa2Mg10 cuboctahedra that share corners with six equivalent CsBa2Mg10 cuboctahedra, edges with four equivalent BaCs2Mg10 cuboctahedra, faces with two equivalent CsBa2Mg10 cuboctahedra, and faces with two equivalent BaCs2Mg10 cuboctahedra. Both Cs–Ba bond lengths are 3.60 Å. There are a spread of Cs–Mg bond distances ranging from 3.49–3.91 Å. Ba is bonded to two equivalent Cs and ten Mg atoms to form BaCs2Mg10 cuboctahedra that share corners with six equivalent BaCs2Mg10 cuboctahedra, edges with four equivalent CsBa2Mg10 cuboctahedra, faces with two equivalent CsBa2Mg10 cuboctahedra, and faces with two equivalent BaCs2Mg10 cuboctahedra. There are a spread of Ba–Mg bond distances ranging from 3.47–3.95 Å. There are four inequivalent Mg sites. In the first Mg site, Mg is bonded in a 3-coordinate geometry to two equivalent Cs, two equivalent Ba, and six Mg atoms. There are a spread of Mg–Mg bond distances ranging from 3.33–3.56 Å. In the second Mg site, Mg is bonded in a 10-coordinate geometry to two equivalent Cs and eight Mg atoms. There are four shorter (3.30 Å) and two longer (3.43 Å) Mg–Mg bond lengths. In the third Mg site, Mg is bonded in a 10-coordinate geometry to two equivalent Cs, two equivalent Ba, and six Mg atoms. There are one shorter (3.09 Å) and one longer (3.47 Å) Mg–Mg bond lengths. In the fourth Mg site, Mg is bonded in a 10-coordinate geometry to two equivalent Ba and eight Mg atoms.

36 MATERIALS SCIENCE↗

Materials Data on CsMg14C by Materials Project

CsMg14C crystallizes in the orthorhombic Amm2 space group. The structure is three-dimensional. Cs is bonded to ten Mg and two equivalent C atoms to form CsMg10C2 cuboctahedra that share corners with six equivalent CsMg10C2 cuboctahedra, corners with twelve MgMg12 cuboctahedra, and faces with two equivalent MgMg12 cuboctahedra. There are a spread of Cs–Mg bond distances ranging from 3.32–3.46 Å. Both Cs–C bond lengths are 3.47 Å. There are seven inequivalent Mg sites. In the first Mg site, Mg is bonded to twelve Mg atoms to form distorted MgMg12 cuboctahedra that share corners with six equivalent MgMg12 cuboctahedra, edges with six MgMg12 cuboctahedra, faces with two equivalent CsMg10C2 cuboctahedra, and faces with six MgMg12 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.11–3.45 Å. In the second Mg site, Mg is bonded to twelve Mg atoms to form MgMg12 cuboctahedra that share corners with four equivalent CsMg10C2 cuboctahedra, corners with six equivalent MgMg12 cuboctahedra, edges with six MgMg12 cuboctahedra, and faces with six MgMg12 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.17–3.36 Å. In the third Mg site, Mg is bonded in a single-bond geometry to two equivalent Cs, two equivalent Mg, and one C atom. Both Mg–Mg bond lengths are 3.23 Å. The Mg–C bond length is 2.14 Å. In the fourth Mg site, Mg is bonded to twelve Mg atoms to form distorted MgMg12 cuboctahedra that share corners with four equivalent CsMg10C2 cuboctahedra, corners with six equivalent MgMg12 cuboctahedra, edges with six MgMg12 cuboctahedra, and faces with six MgMg12 cuboctahedra. There are a spread of Mg–Mg bond distances ranging from 3.00–3.37 Å. In the fifth Mg site, Mg is bonded in a 1-coordinate geometry to one Cs and five Mg atoms. There are one shorter (3.33 Å) and one longer (3.36 Å) Mg–Mg bond lengths. In the sixth Mg site, Mg is bonded in a 1-coordinate geometry to one Cs and five Mg atoms. Both Mg–Mg bond lengths are 3.16 Å. In the seventh Mg site, Mg is bonded in a 11-coordinate geometry to eleven Mg atoms. C is bonded in an L-shaped geometry to two equivalent Cs and two equivalent Mg atoms.

36 MATERIALS SCIENCE↗

Materials Data on CsMg14SiO16 by Materials Project

CsMg14SiO16 is Caswellsilverite-derived structured and crystallizes in the tetragonal P4/mmm space group. The structure is three-dimensional. Cs is bonded to six O atoms to form CsO6 octahedra that share corners with two equivalent CsO6 octahedra, corners with four equivalent MgO6 octahedra, and edges with twelve MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are two shorter (2.23 Å) and four longer (2.52 Å) Cs–O bond lengths. There are five inequivalent Mg sites. In the first Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with two equivalent CsO6 octahedra, corners with two equivalent MgO6 octahedra, corners with two equivalent SiO6 octahedra, and edges with twelve MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are a spread of Mg–O bond distances ranging from 1.87–2.32 Å. In the second Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, edges with two equivalent SiO6 octahedra, and edges with ten MgO6 octahedra. The corner-sharing octahedra tilt angles range from 0–7°. There are a spread of Mg–O bond distances ranging from 2.19–2.24 Å. In the third Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, edges with two equivalent CsO6 octahedra, and edges with ten MgO6 octahedra. The corner-sharing octahedra tilt angles range from 0–11°. There are a spread of Mg–O bond distances ranging from 2.09–2.30 Å. In the fourth Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with six MgO6 octahedra, edges with two equivalent CsO6 octahedra, and edges with ten MgO6 octahedra. The corner-sharing octahedra tilt angles range from 0–11°. There are a spread of Mg–O bond distances ranging from 2.09–2.30 Å. In the fifth Mg site, Mg is bonded to six O atoms to form MgO6 octahedra that share corners with six equivalent MgO6 octahedra, an edgeedge with one CsO6 octahedra, an edgeedge with one SiO6 octahedra, and edges with ten MgO6 octahedra. The corner-sharing octahedra tilt angles range from 1–16°. There are a spread of Mg–O bond distances ranging from 2.18–2.24 Å. Si is bonded to six O atoms to form SiO6 octahedra that share corners with two equivalent SiO6 octahedra, corners with four equivalent MgO6 octahedra, and edges with twelve MgO6 octahedra. The corner-sharing octahedral tilt angles are 0°. There are four shorter (2.07 Å) and two longer (2.23 Å) Si–O bond lengths. There are nine inequivalent O sites. In the first O site, O is bonded to five Mg and one Si atom to form a mixture of edge and corner-sharing OMg5Si octahedra. The corner-sharing octahedra tilt angles range from 0–11°. In the second O site, O is bonded to one Cs and five Mg atoms to form a mixture of distorted edge and corner-sharing OCsMg5 octahedra. The corner-sharing octahedra tilt angles range from 0–11°. Both O–Mg bond lengths are 2.24 Å. In the third O site, O is bonded to one Cs and five Mg atoms to form a mixture of distorted edge and corner-sharing OCsMg5 octahedra. The corner-sharing octahedra tilt angles range from 0–11°. All O–Mg bond lengths are 2.24 Å. In the fourth O site, O is bonded to six Mg atoms to form OMg6 octahedra that share corners with six equivalent OMg6 octahedra and edges with twelve OMg5Si octahedra. The corner-sharing octahedra tilt angles range from 1–5°. In the fifth O site, O is bonded to four equivalent Mg and two equivalent Si atoms to form OMg4Si2 octahedra that share corners with six OMg4Si2 octahedra and edges with twelve OMg5Si octahedra. The corner-sharing octahedral tilt angles are 0°. In the sixth O site, O is bonded to six Mg atoms to form OMg6 octahedra that share corners with six OMg4Si2 octahedra and edges with twelve OMg5Si octahedra. The corner-sharing octahedral tilt angles are 0°. In the seventh O site, O is bonded to two equivalent Cs and four Mg atoms to form OCs2Mg4 octahedra that share corners with six OMg6 octahedra and edges with twelve OCsMg5 octahedra. The corner-sharing octahedral tilt angles are 0°. In the eighth O site, O is bonded to one Cs and five Mg atoms to form a mixture of distorted edge and corner-sharing OCsMg5 octahedra. The corner-sharing octahedra tilt angles range from 0–11°. The O–Mg bond length is 1.87 Å. In the ninth O site, O is bonded to one Cs and five Mg atoms to form a mixture of distorted edge and corner-sharing OCsMg5 octahedra. The corner-sharing octahedra tilt angles range from 0–11°. There are one shorter (1.87 Å) and two longer (2.24 Å) O–Mg bond lengths.

36 MATERIALS SCIENCE↗

Materials Data on Cs2LaN5O17 by Materials Project

Cs2LaN5O17 crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. Cs is bonded to eight O atoms to form distorted CsO8 hexagonal bipyramids that share corners with two equivalent LaO12 cuboctahedra, corners with four equivalent CsO8 hexagonal bipyramids, an edgeedge with one LaO12 cuboctahedra, and an edgeedge with one CsO8 hexagonal bipyramid. There are a spread of Cs–O bond distances ranging from 3.06–3.38 Å. La is bonded to twelve O atoms to form LaO12 cuboctahedra that share corners with four equivalent CsO8 hexagonal bipyramids and edges with two equivalent CsO8 hexagonal bipyramids. There are a spread of La–O bond distances ranging from 2.60–2.77 Å. There are three inequivalent N sites. In the first N site, N is bonded in a trigonal planar geometry to three O atoms. There are a spread of N–O bond distances ranging from 1.25–1.28 Å. In the second N site, N is bonded in a trigonal planar geometry to three O atoms. There are a spread of N–O bond distances ranging from 1.25–1.28 Å. In the third N site, N is bonded in a trigonal planar geometry to three O atoms. There is one shorter (1.24 Å) and two longer (1.28 Å) N–O bond length. There are nine inequivalent O sites. In the first O site, O is bonded in a distorted single-bond geometry to one Cs, one La, and one N atom. In the second O site, O is bonded in a distorted single-bond geometry to two equivalent Cs and one N atom. In the third O site, O is bonded in a distorted single-bond geometry to two equivalent Cs, one La, and one N atom. In the fourth O site, O is bonded in a distorted single-bond geometry to one La and one N atom. In the fifth O site, O is bonded in a distorted single-bond geometry to one Cs, one La, and one N atom. In the sixth O site, O is bonded in a distorted single-bond geometry to two equivalent Cs and one N atom. In the seventh O site, O is bonded in a distorted single-bond geometry to one La and one N atom. In the eighth O site, O is bonded in a single-bond geometry to one N atom. In the ninth O site, O is bonded in a single-bond geometry to one La atom.

36 MATERIALS SCIENCE↗