Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

The AMWCNTs supported porous nanocarbon composites for high-performance supercapacitor

Graphical abstract: The AMWCNTs supported porous nanocarbon composites were prepared by a easy method. The composites had shown good performances for electrochemical energy storage with high specific capacitance and good stability. - Highlights: • The AMWCNTs supported porous nanocarbon composites were prepared. • The composites have good conductivity and large BET specific surface areas. • The composites had shown high specific capacitance, and good stability. - Abstract: The porous nanocarbons supported by acid-treated multiwall carbon nanotubes (PC@ACNTs) were prepared by the combination of the hydrothermal polymerization of glucose on ACNTs, carbonization under N{sub 2} protection and final activation with ZnCl{sub 2}. The materials were characterized by transmission electron microscopy, X-ray powder diffraction and Raman spectra. The results indicated that the ACNTs distributed uniformly into the framework of the porous carbon. The composites showed the high BET specific surface area up to 1712 m{sup 2} g{sup −1} and good conductivity. The electrochemical measurements indicated that the composites processed good performances for electrochemical energy storage (210 F g{sup −1} at 0.5 A g{sup −1}), and high stability (>99.9%), much higher than the corresponding ACNTs, porous carbons and the samples prepared by using raw MWCNTs as source. The good performance of PC@ACNTs composites was relative with the synergy of good conductivity of ACNTs and large specific surface areas of PC.

36 MATERIALS SCIENCE↗

Hydrothermal self-assembly and supercapacitive behaviors of Co(II) ion-modified graphene aerogels in H{sub 2}SO{sub 4} electrolyte

Highlights: • 3D Co(II) ions modified graphene aerogels were prepared by one-step hydrothermal process. • The aerogel electrodes showed hybrid supercapacitor behaviors. • The aerogel electrodes exhibited high rate capability and long-term cycling stability. - Abstract: Reduced graphene oxide (r-GO) aerogels decorated with divalent cobalt ions were synthesized via a one-pot hydrothermal self-assembly route. The interaction of Co(II) ions with 3D r-GO aerogels was investigated by spectroscopic techniques, including Raman, attenuated total reflectance infrared, and X-ray photoelectron spectroscopies. The excellent electrochemical properties of the aerogels were confirmed by cyclic voltammetry, galvanostatic charge/discharge tests, and electrochemical impedance spectroscopy in an acid electrolyte (1 M H{sub 2}SO{sub 4}). The Co(II) ion-modified r-GO aerogels can be used as high-performance hybrid supercapacitor materials with a specific capacitance of 387.2 F g{sup –1} at 1 A g{sup –1} current density and a good cycling stability without capacity decay over 1000 cycles. The mechanical integrity enhancement of the hybrid r-GO aerogel framework and the improvement in its unique capacitive performance are attributed to the efficient interconnection produced by electro-active Co(II) ions.

36 MATERIALS SCIENCE↗

Electrochemical performance studies of MnO{sub 2} nanoflowers recovered from spent battery

Highlights: • MnO{sub 2} is recovered from spent zinc–carbon batteries as nanoflowers structure. • Recovered MnO{sub 2} nanoflowers show high specific capacitance. • Recovered MnO{sub 2} nanoflowers show stable electrochemical cycling up to 900 cycles. • Recovered MnO{sub 2} nanoflowers show low resistance in EIS data. - Abstract: The electrochemical performance of MnO{sub 2} nanoflowers recovered from spent household zinc–carbon battery is studied by cyclic voltammetry, galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. MnO{sub 2} nanoflowers are recovered from spent zinc–carbon battery by combination of solution leaching and electrowinning techniques. In an effort to utilize recovered MnO{sub 2} nanoflowers as energy storage supercapacitor, it is crucial to understand their structure and electrochemical performance. X-ray diffraction analysis confirms the recovery of MnO{sub 2} in birnessite phase, while electron microscopy analysis shows the MnO{sub 2} is recovered as 3D nanostructure with nanoflower morphology. The recovered MnO{sub 2} nanoflowers exhibit high specific capacitance (294 F g{sup −1} at 10 mV s{sup −1}; 208.5 F g{sup −1} at 0.1 A g{sup −1}) in 1 M Na{sub 2}SO{sub 4} electrolyte, with stable electrochemical cycling. Electrochemical data analysis reveal the great potential of MnO{sub 2} nanoflowers recovered from spent zinc–carbon battery in the development of high performance energy storage supercapacitor system.

36 MATERIALS SCIENCE↗

Miniaturized and reconfigurable notch antenna based on a BST ferroelectric thin film

Highlights: • A miniature and agile antenna based on a BST MIM capacitor is simulated and made. • Mn{sup 2+} doped BST thin films are synthesized by chemical deposition and spin coating. • Permittivity and losses of the BST thin film are respectively 225 and 0.02 at 1 GHz. • A miniaturization rate of 70% is obtained with a MIM capacitance of 3.7 pF. • A frequency tunability of 14.5% and a tunability performance of 0.04 are measured. - Abstract: This work deals with the design, realization and characterization of a miniature and frequency agile antenna based on a ferroelectric Ba{sub 0,80}Sr{sub 0,20}TiO{sub 3} thin film. The notch antenna is loaded with a variable metal/insulator/metal (MIM) capacitor and is achieved by a monolithic method. The MIM capacitance is 3.7 pF, which results in a resonant frequency of 670 MHz compared to 2.25 GHz for the unloaded simulated antenna; the resulting miniaturization rate is 70%. The characterization of the antenna prototype shows a frequency tunable rate of 14.5% under an electric field of 375 kV/cm, with a tunability performance η = 0.04.

36 MATERIALS SCIENCE↗

Electrical characterization of grain boundaries of CZTS thin films using conductive atomic force microscopy techniques

Graphical abstract: Experimental setup for conducting AFM (C-AFM). - Highlights: • Cu{sub 2}ZnSnS{sub 4} (CZTS) thin film was grown by reactive co-sputtering. • The electronic properties were probed using conducting atomic force microscope, scanning Kelvin probe microscopy and scanning capacitance microscopy. • C-AFM current flow mainly through grain boundaries rather than grain interiors. • SKPM indicated higher potential along the GBs compared to grain interiors. • The SCM explains that charge separation takes place at the interface of grain and grain boundary. - Abstract: Electrical characterization of grain boundaries (GB) of Cu-deficient CZTS (Copper Zinc Tin Sulfide) thin films was done using atomic force microscopic (AFM) techniques like Conductive atomic force microscopy (CAFM), Kelvin probe force microscopy (KPFM) and scanning capacitance microscopy (SCM). Absorbance spectroscopy was done for optical band gap calculations and Raman, XRD and EDS for structural and compositional characterization. Hall measurements were done for estimation of carrier mobility. CAFM and KPFM measurements showed that the currents flow mainly through grain boundaries (GB) rather than grain interiors. SCM results showed that charge separation mainly occurs at the interface of grain and grain boundaries and not all along the grain boundaries.

36 MATERIALS SCIENCE↗

Electrical and structure properties for the alloy system Ce{sub x}La{sub 1−x}O{sub y} nanostructure thin films

Highlights: • Glassy Ce{sub x}La{sub 1−x}O{sub y} nanostructure films were grown on Si(1 0 0) substrate using the sol–gel method. • G{sub p} = ωϵ{sub 0}ϵ′ tan(δ) was calculated at different temperatures. • Electrical and structural the Ce{sub x}La{sub 1−x}O{sub y} samples were studied. • The conductivity-temperature study shows that the compound obeys the Arrhenius law. - Abstract: The Ce{sub x}La{sub 1−x}O{sub y} samples are synthesized, characterized and their electrical properties are reported at different molar ratios in the frequency range of 10{sup −1}–10{sup +5} Hz. Ac conductivity and permittivity data are analyzed by using conductivity formalism. The values of capacitance and tan(δ) were recorded with respect to different frequencies and temperatures. X-ray diffraction (XRD) patterns of the films show that the films posses crystalline phases. Surface morphology of the films is analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses reveal that elemental composition is in right stoichiometry. Electrical characterizations of the Ce{sub x}La{sub 1−x}O{sub y} samples were done by capacitance–voltage (C–V) and current density–voltage (J–V) measurements of MOS structures. Investigation showed high value of k = 44.80 and low leakage current (∼1 × 10{sup −5} A/cm{sup 2}) of the Ce{sub 0.4}La{sub 0.6}O{sub y} film.

36 MATERIALS SCIENCE↗

Exploring electrolyte preference of vanadium nitride supercapacitor electrodes

Highlights: • Hierarchical VN nanostructures were prepared on graphite foam. • Electrolyte preference of VN supercapacitor electrodes was explored. • VN showed better capacitive property in organic and alkaline electrolytes than LiCl. - Abstract: Vanadium nitride hierarchical nanostructures were prepared through an ammonia annealing procedure utilizing vanadium pentoxide nanostructures grown on graphite foam. The electrochemical properties of hierarchical vanadium nitride was tested in aqueous and organic electrolytes. As a result, the vanadium nitride showed better capacitive energy storage property in organic and alkaline electrolytes. This work provides insight into the charge storage process of vanadium nitride and our findings can shed light on other transition metal nitride-based electrochemical energy storage systems.

36 MATERIALS SCIENCE↗

Hierarchical NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets as electrode materials for supercapacitor and Li ion battery applications

Highlights: • NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets are synthesized by solvothermal reaction. • The prepared NiCo{sub 2}O{sub 4} structures possess excellent electrochemical properies. • The hierarchica electrode materials might potential applications for energy storage devices. - Abstract: In this work, NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets are fabricated successfully on Ni foam by a facile one-pot solvothermal method followed by thermolysis of the precursors. The as-prepared NiCo{sub 2}O{sub 4} products are evaluated as electrode materials for supercapacitors and lithium ion batteries. The results show high discharge capacitance of 925 mF/cm{sup 2} at a current density of 5 mA/cm{sup 2}, with remarkable cycling stability (about 24.2% loss after 6000 cycles) and excellent rate performance (71.5% capacitance retention with current density range from 1 mA/cm{sup 2} to 20 mA/cm{sup 2}). In addition, Ni foam supported NiCo{sub 2}O{sub 4} nanowalls possess excellent discharge capacity of 1100 mAh/g as lithium ion battery anode at a current density of 100 mA/g. The excellent electrochemical performance of NiCo{sub 2}O{sub 4} nanowalls could be ascribed to the unique spatial structure composed of interconnected ultrathin nanosheets, which facilitates ion penetration and electron transportation, demonstrating their potential applications as electrode materials for high performance supercapacitors and lithium ion batteries.

36 MATERIALS SCIENCE↗

Effect of reaction time on the dielectric behaviour of reduced graphene oxide–layered cobalt hydroxide composite for high-k gate dielectrics

Highlights: • Disc-like layered cobalt hydroxide microparticles were synthesized on reduced graphene oxide using one-pot hydrothermal method. • An enhanced dielectric constant of 7.19 × 10{sup 6} with a capacitance of 2.44 × 10{sup −6} F was achieved at 100 Hz frequency. • A leakage current of a few mA was produced in the composites that find potential applications in high-k gate dielectrics. - Abstract: Reduced graphene oxide (RGO)–cobalt hydroxide [Co(OH){sub 2}] composite was synthesized using one-pot hydrothermal method. The frequency-dependent dielectric properties and leakage conduction mechanism were studied for the composite. Samples were made with different reaction times of 2, 4, 6 and 12 h for the same concentration of graphene oxide and cobalt nitrate at constant temperature and pH. A high dielectric constant of 7.19 × 10{sup 6} with a capacitance of 2.45 × 10{sup −6} F was achieved for a reaction time of 2 h, at 100 Hz frequency and 27 °C temperature. One order decrement in the dielectric constant (10{sup 5}) was found with an increase in time starting from 4 to 12 h. The leakage current characteristics revealed Schottky barrier-type conduction mechanism in the composites. Thus, RGO-Co(OH){sub 2} composite with a high dielectric constant, microcapacitance and large leakage current could be regarded as a potential high-k candidate, which has its application as a gate dielectric material in the fabrication of metal oxide semiconductor field effect transistor.

36 MATERIALS SCIENCE↗

Photoelectrochemical performances of n-CdS{sub 1-x}Se{sub x} thin films prepared by spray pyrolysis technique

The CdS{sub 1-x}Se{sub x} (0.0 {<=} x {<=} 1.0) thin films of various compositions have been deposited onto the amorphous and FTO coated glass substrates using a spray pyrolysis technique. An electrode/electrolyte interface has been formed between an n-type CdS{sub 1-x}Se{sub x} (0.0 {<=} x {<=} 1.0) alloyed/mixed type semiconductor and a sulphide/polysulphide redox electrolyte and investigated through the current-voltage, capacitance-voltage and photovoltaic power output characteristics. The dependence of the dark current through the junction and the junction capacitance on the voltage across the junction have been examined and analysed. Upon illumination of the interface with a light of 20 mW/cm{sup 2}, an open-circuit voltage of the order of 335 mV and a short-circuit current of 1.02 mA/cm{sup 2} have been developed (for x = 0.8), which results in energy conversion efficiency and fill factor 0.79% and 0.46% respectively. The magnitudes of the barrier heights at the interfaces have been determined. The significant electrochemical properties have been observed for a cell with electrode composition x = 0.8. (author)

14 SOLAR ENERGY↗

First-Principles Modeling of Sodium Ion and Water Intercalation into Titanium Disulfide Interlayers for Water Desalination

Recent experiments revealed the possibility of using titanium disulfide (TiS 2 ) as the cathode material in capacitive deionization (CDI) devices for water desalination. Although it performed stably up to 70 cycles with a salt removal capacity of 14 mg/g (corresponding to a sodium ion removal capacity of 35.8 mg/g) at high molar concentration (600 mM NaCl), the maximum capacity of TiS 2 as a CDI electrode was much lower (~70 mAh/g) than as a supercapacitor (239 mAh/g). Understanding why the ion capacities of these two configurations of the same material differ will entail elucidating detailed charge/discharge mechanisms at the atomic scale. Here, we present density functional theory simulations of sodium intercalation into TiS 2 interlayers in order to gain such understanding. We systematically investigated TiS 2 stacking patterns and ion intercalation sites, energetics of the intercalated compounds, and phase transformation during sodium intercalation. The calculated structural evolution and capacitance–voltage curve agree quite well with previous measurements. We conclude that the different maximum capacities of TiS 2 measured in aqueous and dry environments originate from weaker interlayer interactions with respect to shear strain after ~33% intercalation of Na + –H 2 O pairs, which is detrimental to the mechanical stability of TiS 2 . In conclusion, this study sheds light on the underlying mechanisms of ion intercalation into layered materials and contributes to understanding requirements for future design and optimization of CDI electrode materials for water desalination.

36 MATERIALS SCIENCE↗

Oxygen- and Nitrogen-Enriched 3D Porous Carbon for Supercapacitors of High Volumetric Capacity

Efficient utilization and broader commercialization of alternative energies (e.g., solar, wind, and geothermal) hinges on the performance and cost of energy storage and conversion systems. For now and in the foreseeable future, the combination of rechargeable batteries and electrochemical capacitors remains the most promising option for many energy storage applications. Porous carbonaceous materials have been widely used as an electrode for batteries and supercapacitors. To date, however, the highest specific capacitance of an electrochemical double layer capacitor is only ~200 F/g, although a wide variety of synthetic approaches have been explored in creating optimized porous structures. Here, we report our findings in the synthesis of porous carbon through a simple, one-step process: direct carbonization of kelp in an NH 3 atmosphere at 700 °C. The resulting oxygen- and nitrogen-enriched carbon has a three-dimensional structure with specific surface area greater than 1000 m 2 /g. When evaluated as an electrode for electrochemical double layer capacitors, the porous carbon structure demonstrated excellent volumetric capacitance (>360 F/cm 3 ) with excellent cycling stability. In conclusion, this simple approach to low-cost carbonaceous materials with unique architecture and functionality could be a promising alternative to fabrication of porous carbon structures for many practical applications, including batteries and fuel cells.

36 MATERIALS SCIENCE↗

Degradation of Ionic Pathway in PEM Fuel Cell Cathode

The degradation of the ionic pathway throughout the catalyst layer in proton exchange membrane fuel cells was studied under an accelerated stress test of catalyst support (potential hold at 1.2 V). Electrochemical behaviors of the cathode based on graphitic mesoporous carbon supported Pt catalyst were examined using electrochemical impedance spectroscopy and cyclic voltammetry. Impedance data were plotted and expressed in the complex capacitance form to determine useful parameters in the transmission line model: the double-layer capacitance, peak frequency, and ionic resistance. Electrochemical surface area and hydrogen crossover current through the membrane were estimated from cyclic voltammogram, while cathode Faradaic resistance was compared with ionic resistance as a function of test time. It was observed that during an accelerated stress test of catalyst support, graphitic mesoporous carbon becomes hydrophilic which increases interfacial area between the ionomer and the catalyst up to 100 h. However, the ionic resistance in the catalyst layer drastically increases after 100 h with further carbon support oxidation. The underlying mechanism has been studied and it was found that significant degradation of ionic pathway throughout the catalyst layer due to catalyst support corrosion induces uneven hydration and mechanical stress in the ionomer.

08 HYDROGEN↗

Representation of Arctic Mixed-Phase clouds and the Wegener-Bergeron-Findeisen Process in Climate Models: Perspectives from a Cloud-Resolving Study

Two types of Arctic mixed-phase clouds observed during the ISDAC and M-PACE field campaigns are simulated using a 3-dimensional cloud-resolving model (CRM) with size-resolved cloud microphysics. The modeled cloud properties agree reasonably well with aircraft measurements and surface-based retrievals. Cloud properties such as the probability density function (PDF) of vertical velocity (w), cloud liquid and ice, the regime of ice growth at the expense of liquid water (i.e., Wegener-Bergeron-Findeisen (WBF) process), and the inherent relationships among cloud properties/processes in the mixed-phase layers are examined to gain insights for improving the representation of the mixed-phase processes in General Circulation Models (GCMs). We find that, the WBF process only occurs in about 50% of the mixed-phase regime with the vast majority occurring in the downdrafts. In updrafts both liquid and ice grow simultaneously. But in GCMs, it is not necessary to treat the WBF process at the subgrid scale. Our CRM results produce a w distribution well represented by a Gaussian normal function, validating, at least for arctic clouds, the subgrid treatment used in GCMs. Our CRM results also support the assumption frequently used in GCMs that mixed phase clouds maintain water vapor very near liquid saturation. A Gamma function with a fixed variance does not accurately represent the subgrid variability of cloud liquid. The PDFs of cloud liquid and cloud ice can be fitted with Gamma functions, and a normal function can be used for total water, but the variance should not be fixed. The relationship between the ice depositional growth rate and cloud ice strongly depends on the capacitance of ice particles. The assumption for the capacitance of ice particles (e.g., 1.0 for spheres) used in GCMs could lead to a large deviation in ice depositional growth. At large sales, the maximum overlap assumption looks appropriate.

54 ENVIRONMENTAL SCIENCES↗

Facile and controllable electrochemical reduction of graphene oxide and its applications

Graphene oxide is electrochemically reduced which is called electrochemically reduced graphene oxide (ER-G). ER-G is characterized with scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The oxygen content is significantly decreased and the sp 2 carbon is restored after electrochemical reduction. ER-G exhibits much higher electrochemical capacitance and cycling durability than carbon nanotubes (CNTs) and chemically reduced graphene; the specific capacitance measured with cyclic voltammetry (20 mV/s) is ~165 F/g, ~86 F/g, and ~100 F/g for ER-G, CNTs, and chemically reduced graphene,1 respectively. The electrochemical reduction of oxygen and hydrogen peroxide was greatly enhanced on ER-G electrodes as compared with CNTs. ER-G has shown a good potential for applications in energy storage, biosensors, and electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carrier Density Profiling of Ultra-Shallow Junction Layers Through Corrected C-V Plotting

The aim of this report is to present and justify a new approach for carrier density profiling in ultra-shallow junction (USJ) layer. This new approach is based on a capacitance measurement model, which takes series impedance, shunt resistance and the presence of a boron skin on the USJ layer into account. It allows us to extract the depletion layer capacitances in the USJ layer from C-V plotting more accurately and hence to obtain better carrier density profiles. Based on this new approach the carrier density profiles of different USJ layers with and without halo-style implants are obtained and discussed.

36 MATERIALS SCIENCE↗

Nanograss and nanostructure formation on silicon using a modified deep reactive ion etching

Silicon nanograss and nanostructures are realized using a modified deep reactive ion etching technique on both plane and vertical surfaces of a silicon substrate. The etching process is based on a sequential passivation and etching cycle, and it can be adjusted to achieve grassless high aspect ratio features as well as grass-full surfaces. The incorporation of nanostructures onto vertically placed parallel fingers of an interdigital capacitive accelerometer increases the total capacitance from 0.45 to 30 pF. Vertical structures with features below 100 nm have been realized.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Deep levels induced by reactive ion etching in n- and p-type 4H-SiC

In this study, the authors investigate deep levels, which are induced by reactive ion etching (RIE) of n-type/p-type 4H-SiC, by deep level transient spectroscopy (DLTS). The capacitance of a Schottky contact fabricated on as-etched p-type SiC is abnormally small due to compensation or deactivation of acceptors extending to a depth of {approx}14 {mu}m, which is nearly equal to the epilayer thickness. The value of the capacitance can recover to that of a Schottky contact on as-grown samples after annealing at 1000 deg. C. However, various kinds of defects, IN2 (E{sub C}-0.30 eV), EN (E{sub C}-1.6 eV), IP1 (E{sub V}+0.30 eV), IP2 (E{sub V}+0.39 eV), IP4 (HK0: E{sub V}+0.72 eV), IP5 (E{sub V}+0.85 eV), IP7 (E{sub V}+1.3 eV), and EP (E{sub V}+1.4 eV), remain at a high concentration (average of total defect concentration in the region ranging from 0.3 {mu}m to 1.0 {mu}m:{approx}5x10{sup 14} cm{sup -3}) even after annealing at 1000 deg. C. The concentration of all these defects generated by RIE, except for the IP4 (HK0) center, remarkably decreases by thermal oxidation. In addition, the HK0 center can also be reduced significantly by a subsequent annealing at 1400 deg. C in Ar.

36 MATERIALS SCIENCE↗