Search NASA⌕ Search

SEARCH · Search NASA

Results for “DETAILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Evaluate the application of ERTS-A data for detecting and mapping snow cover

The author has identified the following significant results. It is concluded from data analysis that the amount of information in ERTS-1 imagery with practical application to snow mapping is substantial. For the Arizona and California test sites, it appears that the extent of the mountain snowpacks can be mapped from ERTS-1 data in more detail than is depicted in aerial survey snow charts. In the Salt-Verde watershed, the agreement between the percentage of the area snow covered as measured from the ERTS-1 data and from aerial survey charts is generally well within 10%. In nearly all of the areas in which greater discrepancies occur, the differences can be explained by changes in snow cover during the interval between the two observations. In the southern Sierra Nevada, the agreement between ERTS-1 data and aerial survey charts is of the order of 5% in all cases, except for the Kaweah Basin on one date. In addition to comparative analysis with aerial snow charts, the ERTS-1 data have also been compared with high altitude aircraft photography. The ERAP data have provided an excellent source of correlative information. The results of the comparative analysis indicate that although small details in the snow line that cannot be detected in the ERTS-1 data can be mapped from higher resolution aircraft data, the boundaries of snow cover can be mapped just as accurately from ERTS-1 data.

Barnes, J. C.↗

Utilizing ERTS-1 imagery for tectonic analysis through study of the Bighorn Mountains region

The author has identified the following significant results. Comparisons of imagery of three seasons, late summer-fall, winter, and spring indicate that for this region fall imagery is the best for overall geologic analysis. Winter scenes with light to moderate snow cover provide excellent topographic detail owing to snow enhancement, lower sun angle, and clarity of the atmosphere. Spring imagery has considerable reduction of tonal contrast owing to the low reflecting heavy green grass cover which subdues lithologic effects; heavy snow cover in the uplands masks topography. Mapping of geologic formations is impractical in most cases. Separation into tonal units can provide some general clues on structure. A given tonal unit can include parts of several geologic formations and different stratigraphic units can have the same tonal signature. Drainage patterns and anomalies provide the most consistent clues for detecting folds, monoclines, and homoclines. Vegetation only locally reflects lithology and structure. False color infrared 9 x 9 transparencies are the most valuable single imagery. Where these can be supplemented by U-2 color infrared for more detailed work, a tremendous amount of information is available. Adequately field checking such a large area just in one scene is the major logistic problem even in a fairly well known region.

Hoppin, R. A.↗

Analysis of sublimation-cooled coated mirrors in convective and radiative environments.

Analytical solutions were obtained for the thermal response of a transpiration- or sublimation-cooled spherical mirror coating exposed to convective and radiative heating. The solutions allow unlimited spectral detail to be accounted for. Results indicate that transpiration-cooled thick coatings (1 cm) may withstand up to 10 kW/sq cm on a steady basis without excessive temperature rise for quartzlike materials with an internal absorption coefficient of 0.01 per cm. On a transient basis, fluxes up to 20 kW/sq cm can be accommodated for a second (cW laser exposure time), 4 kW/sq cm for 5 sec (planetary entry heating time), and of the order of MW/sq cm for millisecond times (short-duration laser bursts) without transpiration cooling for a material with an absorption coefficient of 0.1 per cm. Proportionately higher fluxes can be accommodated with lower absorption coefficients. Thermal stresses produced by the heat pulse are found to be high but within the strength of the materials. The regime in which meaningful solutions may be obtained is mapped in detail.

Howe, J. T.↗

Propagation anisotropies of solar flare protons and electrons at low energies in interplanetary space.

Flux anisotropies in interplanetary space were investigated for protons with E greater than 0.66 MeV and electrons with E greater than 400 keV. Data were taken from the University of Chicago charged-particle telescope aboard the deep-space probe Pioneer 7 and from the Goddard Space Flight Center magnetometer aboard the same spacecraft. Flux anisotropies lying to the east of the average interplanetary magnetic field direction were first reported by McCracken et al. (1971), late in a solar particle event, for proton energies greater than 7.5 MeV. This work extends this investigation to much lower proton energies, studies the proton and electron anisotropies during both early and late phases of a particle event, and makes use of detailed magnetic field data. The investigation consists of two parts, a study of many periods taken at random during solar events, for both protons and electrons, and a detailed analysis of one period, early in an event, during which the magnetic field was near the solar direction.

Pyle, K. R.↗

Application of computer-aided aircraft design in a multidisciplinary environment.

Applications of a multidisciplinary system of computer programs to selected analytical and optimization problems encountered in an aircraft design are described. The depth of the analyses and optimizations permits such detailed output as individual stringer sizes and pressure distributions. Data flow from one program to another is performed in a hands-off manner in the modular and open-ended system. Numerical examples show how this automation permits multidisciplinary trade-off studies, typical of a preliminary design process to be based on such a level of detail in each discipline that normally would not be available at this stage of the process.

Fulton, R. E.↗

Turbulent shear flow of continuum plasma.

The turbulence structure of weakly ionized, continuum plasma is analyzed with emphasis on the turbulent fluctuation and the transport properties of the ionized species. The mean gradients of the velocity and ionized-species concentrations are considered to be uniform. It is assumed that the turbulence Reynolds number is small and that the turbulence field is homogeneous in order to close the dynamic equations of turbulence. It was found that the ratio of the Debye shielding length to the local integral scale of turbulence must be sufficiently small in order for the detailed quasi-neutrality to prevail. The condition of the detailed quasi-neutrality is necessary, in addition to the equal mean concentrations of electrons and ions, in order for the turbulence properties involving the electrons to be the same as those involving the ions.

Chung, P. M.↗

Space Shuttle Program overview.

The Space Shuttle Program is described in terms of the master planning schedule, design details of the Orbiter vehicle and solid rocket boosters, and payload capabilities of the vehicle for various types of missions. Initial flight tests are described along with subsequent envisioned operational missions. Additional topics include individual phases comprising a complete Space Shuttle mission, typical payload curves for various circular and elliptical orbit missions, details of the payload bay and the remote payload manipulator system, and a general listing of avionics provisions in the vehicle.

Everline, R. T.↗

Achieving ultrahigh accuracy with a body pointing CMG/RW control system.

The purpose of the Large Space Telescope (LST) program is to place a three-meter diffraction limited telescope in a 270-nautical mile orbit in order to perform astronomical observations that are not presently possible with earth bound telescopes due to atmospheric obscuration. In order to determine whether the stringent pointing requirements could be met, a complex simulation model was defined which consisted of detailed dynamic representations of control moment gyros (CMGs) and reaction wheels including their noise characteristics, dynamic sensor representations with sensor noise, shock mounts for the CMG actuators, and a detailed flexible body structural model with all significant vehicle and solar panel bending modes. On the basis of both stability and performance studies utilizing this model, it was determined that a body pointing system will meet LST requirements.

Rybak, S. C.↗

Airborne infrared polarimetry.

An airborne remote sensing study of cloud particle sizes and shapes, performed with an IR polarimeter is described. Linear polarization for a given wavelength was measured as a function of the phase angle. Liquid water clouds are found to exhibit considerable detail in their polarization curves, including a positive cloudbow near 40-degrees phase angle, and negative polarization at phase angles of less than 20 degrees and greater than (roughly) 100 degrees. A polarization vs phase angle curve obtained for thick tropical cirrus clouds showed negative polarization at large and small phase angles, and positive polarization at angles between 20 and 145 degrees. There is no indication of a cloudbow or other detailed structure.

Coffeen, D. L.↗

Apollo 16 mission Report. Supplement 1: Apollo 16 guidance, navigation, and control system performance analysis report

The results are reported of additional studies which were conducted to supplement conclusions drawn in the MSC Mission Report and analyses which were not completed in time to meet the Mission Report dealine. A detailed evaluation of the Abort Guidance System sensor assembly and results from the investigation of the X gyro loop anomaly are included. Further evidence is presented substantiating the excellent LM IMU performance obtained from preliminary indications. A detailed study is presented of the procedural changes implemented on Apollo 16 to diminish the number and duration of interruptions to the CSM DAP attitude maneuver during P20 Option 5 operations.

Source record↗

Design guidelines for use of adhesives in hybrid microcircuits

Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

Caruso, S. V.↗

Sound propagation in and radiation from acoustically lined flow ducts: A comparison of experiment and theory

The results of an experimental and theoretical study of many of the fundamental details of sound propagation in hard wall and soft wall annular flow ducts are reported. The theory of sound propagation along such ducts and the theory for determining the complex radiation impedance of higher order modes of an annulus are outlined, and methods for generating acoustic duct modes are developed. The results of a detailed measurement program on propagation in rigid wall annular ducts with and without airflow through the duct are presented. Techniques are described for measuring cut-on frequencies, modal phase speed, and radial and annular mode shapes. The effects of flow velocity on cut-on frequencies and phase speed are measured. Comparisons are made with theoretical predictions for all of the effects studies. The two microphone method of impedance is used to measure the effects of flow on acoustic liners. A numerical study of sound propagation in annular ducts with one or both walls acoustically lined is presented.

Plumblee, H. E., Jr.↗

Stream network analysis from orbital and suborbital imagery, Colorado River Basin, Texas

The author has identified the following significant results. Orbital SL-2 imagery (earth terrain camera S-190B), received September 5, 1973, was subjected to quantitative network analysis and compared to 7.5 minute topographic mapping (scale: 1/24,000) and U.S.D.A. conventional black and white aerial photography (scale: 1/22,200). Results can only be considered suggestive because detail on the SL-2 imagery was badly obscured by heavy cloud cover. The upper Bee Creek basin was chosen for analysis because it appeared in a relatively cloud-free portion of the orbital imagery. Drainage maps were drawn from the three sources digitized into a computer-compatible format, and analyzed by the WATER system computer program. Even at its small scale (1/172,000) and with bad haze the orbital photo showed much drainage detail. The contour-like character of the Glen Rose Formation's resistant limestone units allowed channel definition. The errors in pattern recognition can be attributed to local areas of dense vegetation and to other areas of very high albedo caused by surficial exposure of caliche. The latter effect caused particular difficulty in the determination of drainage divides.

Baker, V. R.↗

Facilitating the exploitation of ERTS-1 imagery using snow enhancement techniques

The author has identified the following significant results. The applications of ERTS-1 imagery for geological fracture mapping regardless of season has been repeatedly confirmed. The enhancement provided by a differential cover of snow increases the number and length of fracture-lineaments which can be detected with ERTS-1 data and accelerates the fracture mapping process for a variety of practical applications. The geological mapping benefits of the program will be realized in geographic areas where data are most needed - complex glaciated terrain and areas of deep residual soils. ERTS-1 derived fracture-lineament maps which provide detail well in excess of existing geological maps are not available in the Massachusetts-Connecticut area. The large quantity of new data provided by ERTS-1 may accelerate and improve field mapping now in progress in the area. Numerous other user groups have requested data on the techniques. This represents a major change in operating philosophy for groups who to data judged that snow obscured geological detail.

Wobber, F. J.↗

Apollo experience report: Earth landing system

A brief discussion of the development of the Apollo earth landing system and a functional description of the system are presented in this report. The more significant problems that were encountered during the program, the solutions, and, in general, the knowledge that was gained are discussed in detail. Two appendixes presenting a detailed description of the various system components and a summary of the development and the qualification test programs are included.

West, R. B.↗

Arctic and subarctic environmental analyses utilizing ERTS-1 imagery

The author has identified the following significant results. Physiognomic landscape features were used as geologic and vegetative indicators in preparation of a surficial geology, vegetation, and permafrost map at a scale of 1:1 million using ERTS-1 band 7 imagery. The detail from this map compared favorably with USGS maps at 1:250,000 scale. Physical boundaries mapped from ERTS-1 imagery in combination with ground truth obtained from existing small maps and other sources resulted in improved and more detailed maps of permafrost terrain and vegetation for the same area. ERTS-1 imagery provides for the first time, a means of monitoring the following regional estuarine processes: daily and periodic surface water circulation patterns; changes in the relative sediment load of rivers discharging into the inlet; and, several local patterns not recognized before, such as a clockwise back eddy offshore from Clam Gulch and a counterclockwise current north of the Forelands. Comparison of ERTS-1 and Mariner imagery has revealed that the thermokarst depressions found on the Alaskan North Slope and polygonal patterns on the Yukon River Delta are possible analogs to some Martian terrain features.

Anderson, D. M.↗

California coast nearshore processes study

The author has identified the following significant results. Large scale sediment plumes from intermittent streams and rivers form detectable seasonal patterns on ERTS-1 imagery. The ocean current systems, as plotted from three California coast ERTS mosaics, were identified. Offshore patterns of sediment in areas such as the Santa Barbara Channel are traceable. These patterns extend offshore to heretofore unanticipated ranges as shown on the ERTS-1 imagery. Flying spot scanner enhancements of NASA tapes resulted in details of subtle and often invisible (to the eye) nearshore features. The suspended sediments off San Francisco and in Monterey Bay are emphasized in detail. These are areas of extremely changeable offshore sediment transport patterns. Computer generated contouring of radiance levels resulted in maps that can be used in determining surface and nearsurface suspended sediment distribution. Tentative calibrations of ERTS-1 spectral brightness against sediment load have been made using shipboard measurements. Information from the combined enhancement and interpretation techniques is applicable to operational coastal engineering programs.

Pirie, D. M.↗

Surface electrical properties experiment, part 1

The design evolution, hardware development, and production history of the surface electrical properties (SEP) experiment are discussed. The SEP transmitter and receiver were designed to be used on the lunar surface during the Apollo 17 mission. The equipment was used to measure lunar surface electrical properties over traverses totalling more than 8 kilometers, for a duration of more than 100 minutes. A comprehensive outline of the techniques, is given along with a simplified detailed breakdown of equipment description and function to outline the principles of operation. A history of the design evolution with trade-off criteria and emphasis on changes caused by decisions reached in solving problems inherent in a fast-paced development program are presented from the viewpoint of overall design concept and in detail for each item of deliverable hardware. There is a brief account of lunar operations.

Kupfer, W. S.↗