Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

An intentionally positioned (In,Ga)As quantum dot in a micron sized light emitting diode

We have integrated individual (In,Ga)As quantum dots (QDs) using site-controlled molecular beam epitaxial growth into the intrinsic region of a p-i-n junction diode. This is achieved using an in situ combination of focused ion beam prepatterning, annealing, and overgrowth, resulting in arrays of individually electrically addressable (In,Ga)As QDs with full control on the lateral position. Using microelectroluminescence spectroscopy we demonstrate that these QDs have the same optical quality as optically pumped Stranski-Krastanov QDs with random nucleation located in proximity to a doped interface. The results suggest that this technique is scalable and highly interesting for different applications in quantum devices.

36 MATERIALS SCIENCE↗

Identification of low-energy peaks in electron emission spectroscopy of InGaN/GaN light-emitting diodes

The measurement of the energy distribution of vacuum emitted electrons from InGaN/GaN light-emitting diodes (LEDs) has proven essential in understanding the efficiency loss mechanism known as droop. We report on the measurement and identification of a new low-energy feature in addition to the previously measured three peaks present in the electron emission spectrum from a forward biased LED. Photoemission measurements show that the two low-energy peaks correspond to photoemitted electrons from each of the p-contact metals, palladium and gold. Here we confirm that the mid and high-energy peaks are due to electrons which have transited the p-type region of the device and have been emitted from the semiconductor surface from the bulk Γ-valley or a high-energy side valley.

74 ATOMIC AND MOLECULAR PHYSICS↗

Accuracy of the Frensley inflow boundary condition for Wigner equations in simulating resonant tunneling diodes

In this paper, the accuracy of the Frensley inflow boundary condition of the Wigner equation is analyzed in computing the I-V characteristics of a resonant tunneling diode (RTD). It is found that the Frensley inflow boundary condition for incoming electrons holds only exactly infinite away from the active device region and its accuracy depends on the length of contacts included in the simulation. For this study, the non-equilibrium Green's function (NEGF) with a Dirichlet to Neumann mapping boundary condition is used for comparison. The I-V characteristics of the RTD are found to agree between self-consistent NEGF and Wigner methods at low bias potentials with sufficiently large GaAs contact lengths. Finally, the relation between the negative differential conductance (NDC) of the RTD and the sizes of contact and buffer in the RTD is investigated using both methods.

97 MATHEMATICS AND COMPUTING↗

Diffused trenches for high fill-factor Low-Gain Avalanche Diodes

Low-Gain Avalanche Diodes (LGADs) are a class of silicon detectors that have been specifically designed for the fast detection of minimum ionizing particles (mips) in High-Energy Physics experiments. While they provide timing resolution on the order of a few tens of picoseconds, they cannot achieve high spatial resolution due to the intrinsic characteristics of their structures. Thus, active R&D is on-going to develop detectors based on LGADs to improve their spatial resolution while maintaining the timing performance of the LGADs. Such devices are, for example, AC-coupled LGADs and Deep-Junction LGADs. Another device option is the Trench-Isolated LGAD (TI LGAD), where trenches etched at the periphery of the pixels isolate them while providing a high fill-factor. Here, in this paper, we present a variation of this latter approach, demonstrating its feasibility by means of 2-dimensional TCAD simulations.

47 OTHER INSTRUMENTATION↗

Overcoming Degradation Pathways to Achieve Stable Blue Perovskite Light-Emitting Diodes

Mixed halide (Br/Cl) perovskite nanocrystals (NCs) that represent an advanced blue emitter commonly suffer from spectral instability and poor lifespan; notably, the lack of understanding of the failure mechanisms of these devices has restricted the future progress. Here, we determine that the degradation of CsPbBr x Cl 3– x NCs containing blue light-emitting diodes (LEDs) is due to the combination of two effects. Cl – drift among adjoining NCs under an electric field is found to induce a Cl-deficient material region in multiple NC layers, which dominates the unstable electroluminescence and causes fast degradation in the corresponding devices. In comparison, the monolayer NC devices that feature restricted anion drift pathways exhibit better operational stability; however, excess hole injection is demonstrated to induce irreversible chlorine loss in NCs. Such a process that largely arises from electrochemical oxidation of Cl – initiates a mild device failure in operation of tens of minutes. Through revealing these mechanisms, we modulate the devices’ construction and operational conditions to achieve a longer lifespan.

14 SOLAR ENERGY↗

Effects of electron-irradiation on electrical properties of AlGaN/GaN Schottky barrier diodes

Effects of 1 MeV electron-irradiation at room temperature on the electrical properties of AlGaN/GaN heterostructures, including leakage currents, threshold voltages, and electron traps, have been investigated using Schottky barrier diodes (SBDs) fabricated on the AlGaN. The SBDs, before and after the irradiation with a dose of 5x10{sup 15} cm{sup -2}, were characterized by temperature dependent current-voltage and capacitance-voltage measurements and deep level transient spectroscopy. It is found that the irradiation causes (i) significant increase in leakage currents, dominated by tunneling conduction, at both reverse and low-forward biases; (ii) a clear negative shift in threshold voltage in the pinch-off region; and (iii) creation of traps A{sub e}(approx1.1 eV) or A{sub 2}(1.2 eV) and E{sub e}(0.09 eV) in the GaN buffer and AlGaN regions. The irradiation-induced traps can be used to account for the increase in leakage currents and shift in threshold voltage. However, as compared to traps A{sub 2}(1.2 eV) and E(0.13 eV) induced in thick GaN layers by electron-irradiation, the irradiation-induced traps in the AlGaN/GaN heterostructures show some changes in activation energy and electron capture behavior.

36 MATERIALS SCIENCE↗

Fabrication and Characterization of New Hybrid Organic Light Emitting Diode (OLED): Europium-picrate-triethylene oxide Complex

Thin-film light emitting devices based on organic materials have attracted vast interest in applications such as light emitting diode (LED) and flat-panel display. The organic material can be attached with inorganic material to enhance the performance of the light emitting device. A hybrid OLED based on a new complex of europium picrate (Eu-pic) with triethylene oxide (EO3) ligand is fabricated. The OLED is fabricated by using spin coating technique with acetone as the solvent and aluminum as the top electrode. The optical, photoluminescence (PL) and electrical properties of the sample are carried out by UV-Vis spectroscopy (Jasco V-750), luminescence spectroscopy (Perkin Elmer LS-500) and source measure unit (SMU)(Keithly), respectively.

36 MATERIALS SCIENCE↗

Mechanisms of lighting enhancement of Al nanoclusters-embedded Al-doped ZnO film in GaN-based light-emitting diodes

Aluminum (Al)-doped ZnO (AZO) films with embedded Al nanoclusters were proposed and utilized to enhance the light output power and maximum operation current of GaN-based light-emitting diodes (LEDs). The AZO films were sputtered using ZnO and Al targets in a magnetron cosputtering system. With Al dc power of 7 W and ZnO 100 W ac power, the electron concentration of 4.1x10{sup 20} cm{sup -3}, electron mobility of 16.2 cm{sup 2}/V s, and resistivity of 7.2x10{sup -4} {Omega} cm were obtained for the deposited AZO film annealed at 600 deg. C for 1 min in a N{sub 2} ambient. As verified by a high resolution transmission electron microscopy, the deposited AZO films with embedded Al nanoclusters were clearly observed. A 35% increase in light output power of the GaN-based LEDs with Al nanoclusters-embedded AZO films was realized compared with the conventional LEDs operated at 500 mA. It was verified experimentally that the various characteristics of GaN-based LEDs including the antireflection, light scattering, current spreading, and the light extraction efficiency in light emission could be significantly enhanced with the use of Al nanoclusters-embedded AZO films.

36 MATERIALS SCIENCE↗

Highly-selective wettability on organic light-emitting-diodes patterns by sequential low-power plasmas

Patterned organic light-emitting-diode substrates were treated by oxygen (O{sub 2}) and tetrafluoromethane (CF{sub 4}) radio-frequency (rf, 13.56 MHz) plasmas of low-power (close to 1 W) that were capacitively-coupled. An unexpected wettability contrast (water contact angle difference up to 90 deg. ) between the indium-tin-oxide anode and the bank resist regions was achieved, providing excellent conditioning prior to the ink-jet printing. This selectivity was found to be adjustable by varying the relative exposure time to the O{sub 2} and CF{sub 4} sequential plasmas. Static contact angle measurements and extensive x-ray photoelectron spectroscopy analyses showed that the wetting properties depend on the carbon and fluorine chemical functional groups formed at the outermost surface layers, whereas atomic force microscopy images did not show a morphological change. Plasma optical emission spectroscopy and ion mass spectroscopy suggested that surface functionalization was initiated by energy transfer from ionic species (O{sup +}, O{sub 2}{sup +}, CF{sup +}, CF{sub 2}{sup +}, and CF{sub 3}{sup +}) and excited neutrals (O{sup *} and F{sup *}). The absolute ion fluxes measured on the substrates were up to 10{sup 14} cm{sup -2} s{sup -1} and the ion energies up to 20 eV, despite the low powers applied during the process.

36 MATERIALS SCIENCE↗

Research on pinching characteristics of electron beams emitted from different cathode surfaces of a rod-pinch diode

The particle-in-cell code UNIPIC is used to simulate the working process of a rod-pinch diode and investigate the pinching characteristics of electron beams emitted from different cathode surfaces. The simulation results indicate that the electron beam emitted from the upstream surface pinches better than from other surfaces when all the three surfaces emit electrons. The charge-density deposition on the anode surface peaks at the rod tip while the deposited charge density is approximately uniform over the first 15 mm of the rod before rapidly increasing over the last 3 mm, indicating a large axial extent of electron deposition. For the case of single-surface emission, the pinching quality of the electron beam emitted from the downstream surface is better than those from other surfaces. The charge-density deposition peaks at the rod tip and decreases rapidly off the tip. Based on the relationship of Larmor radius, beam's self-magnetic field, and the spatial current distribution, the above simulation results are analyzed theoretically. The experiments are performed on the inductive voltage adder to examine the simulations. By comparing the axial distribution of the radiation on the anode rod measured with the pinhole camera and the on-axis forward x-ray dose measured with the LiF thermoluminescent detectors, the simulation results are verified. The electron emission suppression method and the impedance change for each case are investigated or discussed in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An upper bound to time-averaged space-charge limited diode currents

The Child-Langmuir law limits the steady-state current density across a one-dimensional planar diode. While it is known that the peak current density can surpass this limit when the boundary conditions vary in time, it remains an open question of whether the average current can violate the Child-Langmuir limit under time-dependent conditions. For the case where the applied voltage is constant but the electric field at the cathode is allowed to vary in time, one-dimensional particle-in-cell simulations suggest that such a violation is impossible. Although a formal proof is not given, an upper bound on the time-averaged current density is offered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Biparametric equilibria bifurcations of the Pierce diode: A one-dimensional plasma-filled device

The equilibria bifurcations of the biparametric version of the classical Pierce diode, a one-dimensional plasma-filled device, are analyzed in detail. Our investigation reveals that this spatiotemporal model is not structurally stable in relation to a second control parameter, the ratio of the plasma ion density to the injected electron beam density. For the first time, we relate the existence of one-fluid chaotic regions with specific biparametric equilibria bifurcations, identifying the restricted regions in the parametric plane where they occur. We show that the system presents several biparametric scenarios involving codimension-two transcritical bifurcations. Finally, we provide the spatial profile of the stable and unstable one-fluid equilibria in order to describe their metamorphoses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Barrier height of Pt-In{sub x}Ga{sub 1-x}N (0{<=}x{<=}0.5) nanowire Schottky diodes

The barrier height of Schottky diodes made on In{sub x}Ga{sub 1-x}N nanowires have been determined from capacitance-voltage measurements. The nanowires were grown undoped on n-type (001) silicon substrates by plasma-assisted molecular beam epitaxy. The length, diameter and density of the nanowires are {approx}1 {mu}m, 20 nm, and 1x10{sup 11} cm{sup -2}. The Schottky contact was made on the top surface of the nanowires with Pt after planarizing with parylene. The measured barrier height {Phi}{sub B} varies from 1.4 eV (GaN) to 0.44 eV (In{sub 0.5}Ga{sub 0.5}N) and agrees well with the ideal barrier heights in the Schottky limit.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Entangled Light Emission From a Diode

Electrically-driven entangled photon generation is demonstrated for the first time using a single semiconductor quantum dot embedded in a light emitting diode structure. The entanglement fidelity is shown to be of sufficient quality for applications such as quantum key distribution.

36 MATERIALS SCIENCE↗

High performance blue-emitting organic light-emitting diodes from thermally activated delayed fluorescence: A guest/host ratio study

Emitters displaying thermally activated delayed fluorescence (TADF) can drive highly efficient organic light-emitting diodes (OLEDs). Such emitters are usually incorporated into the emissive layer (EML) at a relatively low concentration (<20 wt. %) with respect to a host material, a guest-host method inherited from conventional fluorescent or phosphorescent OLEDs. In this work, detailed studies on OLEDs, in which the concentration of oBFCzTrz (a blue-emitter displaying TADF) in a DPEPO host was varied from 8 to 100 wt. %, reveals that oBFCzTrz displays ambipolar transport and limited fluorescence-quenching due to aggregation. For instance, a neat film of oBFCzTrz maintains a photoluminescence quantum yield of 82%. We determine that OLEDs with an EML having an oBFCzTrz concentration of 50 wt. % in DPEPO yield a maximum external quantum efficiency (EQE) of 25.5% with an EQE roll-off of 10% in the range from 10 to 1000 cd/m 2 and Commission Internationale de l'Eclairage color coordinates of (0.20, 0.44). OLEDs with smaller or larger oBFCzTrz concentrations display smaller maximum EQE values. OLEDs with a neat oBFCzTrz EML display a maximum EQE of 14.0%. Finally, time-resolved electroluminescent decay studies, and analysis using a simple model, reveal significant differences in transport, trapping, and recombination in these devices.

36 MATERIALS SCIENCE↗

The role of Mg bulk hyper-doping and delta-doping in low-resistance GaN homojunction tunnel diodes with negative differential resistance

GaN p ++ /n ++ tunnel junctions (TJs) with heavy bulk or delta Mg doping at the junction were grown via molecular beam epitaxy with a hysteresis-free and repeatable negative differential resistance (NDR). The TJ with Mg doping of 5.5 × 10 20 cm -3 shows NDR at~1.8 V and a large current density of 3.4 KA/cm 2 at -1.0 V. Atomic resolution scanning transmission electron microscopy imaging showed no additional defects despite the doping exceeding the solubility limit in GaN allowing subsequent epitaxy of series-connected layers and devices. GaN homojunction TJs grown on bulk GaN showed an improved current density and NDR stability. In addition, the effect of Mg delta doping at the junction was investigated for the first time showing a dramatic improvement in the tunneling characteristics. A metal-organic chemical vapor deposition (MOCVD) grown InGaN light-emitting diode (LED) with an MBE grown GaN homojunction tunnel contact to the MOCVD grown p-GaN layer shows superior lateral conductivity and improved luminescence uniformity, but suffers an added voltage penalty, assumed to be due to interface impurities, compared to control LED with indium-tin-oxide.

Epitaxy↗

An intermediate model for fitting triplet–triplet annihilation in phosphorescent organic light emitting diode materials

Triplet–triplet annihilation (TTA) is one of the primary contributors to efficiency roll-off and permanent material degradation in phosphorescent organic light-emitting diodes. Here, the two limiting case models typically used to quantify this quenching mechanism are multi-step Dexter and single-step Förster, which, respectively, assume ideal Fickian diffusion or perfect trapping of triplet excitons. For device-relevant guest doping levels (typically 5–12 vol. %), both significant diffusion of excitons and trapping due to spatial and energetic disorder exist, so neither conventional model fits experimental data well. We develop and validate an intermediate TTA model, which is a weighted average of the limiting cases of pure radiative decay (no TTA) and multi-step Dexter based TTA that returns an effective TTA rate constant and a parameter quantifying the portion of well-isolated excitons. Kinetic Monte-Carlo simulations and time-resolved photoluminescence measurements of an archetype host–guest system demonstrate that our intermediate model provides significantly improved fits with more realistic physical values, is more robust to variations in experimental conditions, and provides an analysis framework for the effects of trapping on TTA.

30 DIRECT ENERGY CONVERSION↗

Investigation of the foreplasma parameters of a laser-plasma diode

The results of computing experiments are presented, which allow estimating the parameters of the laser foreplasma used to initiate a discharge in a laser-plasma diode. The resultant plasma is a material medium which carries a high-power discharge current. This opens a possibility to make a compact source of hard X-ray radiation and fast-ion streams. Proceeding from our numerical simulations we derive similarity relations, which enable determining the fluxes of plasma mass and charge as functions of laser pulse parameters. (effects of laser radiation on matter. laser plasma)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗