Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXCHANGE INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Interaction models and configurational entropies of binary MoTa and the MoNbTaW high entropy alloy

We introduce a simplified method to model the interatomic interactions of high entropy alloys based on a lookup table of cluster energies. Furthermore, these interactions are employed in replica exchange Monte Carlo simulations with histogram analysis to obtain thermodynamic properties across a broad temperature range. Kikuchi's cluster variation method entropy formalism is applied to directly calculate entropy from statistics on short- and long-range chemical order, and we discuss the convergence of the entropy as clusters of differing size are included. A high temperature series expansion aids in our understanding of the convergence. Computer codes implementing these methods, and supporting data, are freely available on the internet.

36 MATERIALS SCIENCE↗

Home Energy Management System - VOLTTRON Integration

In most Home Energy Management Systems (HEMS) available in the market, different devices running different communication protocols cannot interact with each other and exchange information. As a result of this integration, the information about different devices running different communication protocol can be accessible by other agents and devices running on VOLTTRON platform. The integration process can be used by any HEMS available in the market regardless of the programming language they use. If the existing HEMS provides an Application Programming Interface (API) based on the RESTFul architecture, that API can be used for integration. Our candidate HEMS in this project is home-assistant (Hass). An agent is implemented which can communicate with the Hass API and receives information about the devices loaded on the API. The agent publishes the information it receives on the VOLTTRON message bus so other agents can have access to this information. On the other side, for each type of devices, an agent is implemented such as Climate Agent, Lock Agent, Switch Agent, Light Agent, etc. Each of these agents is subscribed to the messages published on the message bus about their associated devices. These agents can also change the status of the devices by sending appropriate service calls to the API. Other agents and services on the platform can also access this information and coordinate their decision-making process based on this information.

Zandi, Helia↗

QED Based Calculation of the Fine Structure Constant

Quantum electrodynamics is complex and its associated mathematics can appear overwhelming for those not trained in this field. Here, semi-classical approaches are used to obtain a more intuitive feel for what causes electrostatics, and the anomalous magnetic moment of the electron. These intuitive arguments lead to a possible answer to the question of the nature of charge. Virtual photons, with a reduced wavelength of λ, are assumed to interact with isolated electrons with a cross section of πλ 2 . This interaction is assumed to generate time-reversed virtual photons that are capable of seeking out and interacting with other electrons. This exchange of virtual photons between particles is assumed to generate and define the strength of electromagnetism. With the inclusion of near-field effects the model presented here gives a fine structure constant of ~1/137 and an anomalous magnetic moment of the electron of ~0.00116. These calculations support the possibility that near-field corrections are the key to understanding the numerical value of the dimensionless fine structure constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neutrinoless Double Beta Decay of 136 Xe and Related Nuclear Structure Studies (Final Scientific Report)

The search for neutrinoless double-beta decay (0nbb) explores new physics by directly probing the unknown mass scale and possible Majorana nature of the neutrino. The nEXO experiment, one of the two leading proposed ton-scale projects in the US, has a projected sensitivity to the 136 Xe 0nbb half-life of 10 28 years. The interpretation of possible signals in this next generation of experiments would be complicated by significant variations in theoretical calculations of the nuclear matrix elements (NMEs) of the decay, and nuclear structure measurements testing those theories can help address that uncertainty. We have 136 Xe(p,n) 136 Cs reaction at TUNL to deduce the level-scheme of states in 136 Cs through which the lowest-lying 1+ state decays. We find that over 99% of such decays will proceed through at least one isomeric state with a lifetime of order 100ns, which would enable large xenon detectors to employ a delayed-coincidence technique to search for charge-exchange processes including solar neutrino interactions. We have carried out measurements at TUNL of the 134 Xe( 3 He,n) 136 Ba and 136 Xe( 3 He,n) 138 Ba reactions to low-lying 0 + states in the residuals to probe the BCS assumption for QRPA NME calculations for the initial and final nuclei in 136 Xe 0nbb. While the analyses of these reactions is not yet complete and is ongoing, our initial results indicate tension with the BCS assumption. We have assembled a thermosyphon cooling R&D system for nEXO which has demonstrated up to 500 W of cooling in vacuum. We have developed a simple thermosyphon cooling simulation for nEXO and planned laboratory tests with the R&D system to benchmark it.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spin Wave Excitations in Honeycomb Antiferromagnet MnTiO 3

Using inelastic neutron scattering, we investigate the spin wave excitations on the antiferromagnetic MnTiO 3 (T N = 65 K), which has the stacked honeycomb structure. At T = 2 K, the spin wave energy extends up to 10.7 meV with the zone-center anisotropy gap of 0.8 meV. Whereas the dispersion is also strong along the direction perpendicular to the honeycomb planes, the exchange cancellation causes the magnetic interactions to be effectively anisotropic below TN. Furthermore, while the spin wave spectrum survives at temperatures above TN, we find that the magnetic interactions become more anisotropic within the paramagnetic phase. These results suggest that the magnetic interaction in MnTiO 3 crosses over from being three dimensional to two dimensional above T N .

36 MATERIALS SCIENCE↗

Transferring data objects: A focused Ada investigation

The use of the Ada language does not guarantee that data objects will be in the same form or have the same value after they have been stored or transferred to another system. There are too many possible variables in such things as the formats used and other protocol conditions. Differences may occur at many different levels of support. These include program level, object level, application level, and system level. A standard language is only one aspect of making a complex system completely homogeneous. Many components must be standardized and the various standards must be integrated. The principal issues in providing for interaction between systems are of exchanging files and data objects between systems which may not be compatible in terms of their host computer, operating system or other factors. A typical resolution of the problem of invalidating data involves at least a common external form, for data objects and for representing the relationships and attributes of data collections. Some of the issues dealing with the transfer of data are listed and consideration is given on how these issues may be handled in the Ada language.

Legrand, Sue↗

Thermal phases of the interstellar medium in galaxies

This review deals with the theory of multiphase media in astrophysical systems. The basic reasons for the existence of multiple thermal phases, and the fundamental connection between multiphase media and thermal instability are discussed. Important examples of multiphase media are described, and the interactions among phases, i.e., mass exchange driven by thermal conduction and hydrodynamic ablation are examined. Mass exchange may compete with radiative heating and cooling for control of the thermal state of the hot phase, and may alter the thermal stability properties of the system.

Begelman, Mitchell C.↗

Coercivity of domain wall motion in thin films of amorphous rare earth-transition metal alloys

Computer simulations of a two dimensional lattice of magnetic dipoles are performed on the Connection Machine. The lattice is a discrete model for thin films of amorphous rare-earth transition metal alloys, which have application as the storage media in erasable optical data storage systems. In these simulations, the dipoles follow the dynamic Landau-Lifshitz-Gilbert equation under the influence of an effective field arising from local anisotropy, near-neighbor exchange, classical dipole-dipole interactions, and an externally applied field. Various sources of coercivity, such as defects and/or inhomogeneities in the lattice, are introduced and the subsequent motion of domain walls in response to external fields is investigated.

Mansuripur, M.↗

Summary of the NASA Lewis component technology program for Stirling power converters

An update is presented on the NASA Lewis Stirling component technology program. The component technology program has been organized as part of the NASA Lewis effort to develop Stirling converter technology for space power applications. The Stirling space power project is part of the High Capacity Power element of the NASA Civil Space Technology Initiative (CSTI). Lewis is also providing technical management of a DOE funded project to develop Stirling converter systems for distributed dish solar terrestrial power applications. The primary contractors for the space power and solar terrestrial projects develop component technologies directly related to their project goals. This Lewis component technology program, while coordinated with these main projects, is aimed at longer term issues, advanced technologies, and independent assessments. Topics to be discussed include bearings, linear alternators, controls and load interaction, materials/life assessment, and heat exchangers.

Thieme, Lanny G.↗

Overview of the NASA Lewis component technology program for Stirling power converters

This paper presents an update on the NASA Lewis Stirling component technology program. The component technology program has been organized as part of the NASA Lewis effort to develop Stirling converter technology for space power applications. The Stirling space power program is part of the High Capacity Power element of the NASA Civil Space Technology Initiative. Lewis is also providing technical management of a DOE-funded project to develop Stirling converter systems for distributed dish solar terrestrial power applications. The Lewis component technology program is coordinated with the primary contract efforts of these projects but is aimed at longer term issues, advanced technologies, and independent assessments. Topics to be discussed include bearings, linear alternators, controls and load interaction, materials/life assessment, and heat exchangers.

Thieme, Lanny G.↗

Production of H-3 at large momentum in alpha-(C-12) collisions at 2A GeV

Calculations of the longitudinal and transverse momentum distributions for H-3 production at large momentum in alpha-(C-12) collisions near 2A GeV are compared to experiment. Triton exchange and final-state interactions are shown to represent large corrections to the impulse approximation for proton knockout. A method for calculating interference effects for inelastic fragmentation is discussed. Good agreement with experiment using a phenomenological overlap function for (H-3)-p is found successful in describing H-3 production in pion-induced reactions. Comparisons to momentum distributions obtained through (p, 2p) and (e, ep) reactions on He-4 are made.

Cucinotta, Francis A.↗

Spin Changing Collisions of Hydrogen

We discuss spin changing collisions of hydrogen atoms. Employing a fully quantal theory we calculate and present new collision data. We discuss the respective roles of spin exchange and long range magnetic interactions in collisonal redistribution of sub-level populations. The calculated atomic data is needed for accurate modeling of 21 cm line emission/absorption by primordial hydrogen in the early universe.

Zygelman, Bernard↗

Loads and Structural Dynamics Requirements for Spaceflight Hardware

The purpose of this document is to establish requirements relating to the loads and structural dynamics technical discipline for NASA and commercial spaceflight launch vehicle and spacecraft hardware. Requirements are defined for the development of structural design loads and recommendations regarding methodologies and practices for the conduct of load analyses are provided. As such, this document represents an implementation of NASA STD-5002. Requirements are also defined for structural mathematical model development and verification to ensure sufficient accuracy of predicted responses. Finally, requirements for model/data delivery and exchange are specified to facilitate interactions between Launch Vehicle Providers (LVPs), Spacecraft Providers (SCPs), and the NASA Technical Authority (TA) providing insight/oversight and serving in the Independent Verification and Validation role. In addition to the analysis-related requirements described above, a set of requirements are established concerning coupling phenomena or other interaction between structural dynamics and aerodynamic environments or control or propulsion system elements. Such requirements may reasonably be considered structure or control system design criteria, since good engineering practice dictates consideration of and/or elimination of the identified conditions in the development of those subsystems. The requirements are included here, however, to ensure that such considerations are captured in the design space for launch vehicles (LV), spacecraft (SC) and the Launch Abort Vehicle (LAV). The requirements in this document are focused on analyses to be performed to develop data needed to support structural verification. As described in JSC 65828, Structural Design Requirements and Factors of Safety for Spaceflight Hardware, implementation of the structural verification requirements is expected to be described in a Structural Verification Plan (SVP), which should describe the verification of each structural item for the applicable requirements. The requirement for and expected contents of the SVP are defined in JSC 65828. The SVP may also document unique verifications that meet or exceed these requirements with Technical Authority approval.

George James↗

Mars Express Forward Link Capabilities for the Mars Relay Operations Service (MaROS)

This software provides a new capability for landed Mars assets to perform forward link relay through the Mars Express (MEX) European Union orbital spacecraft. It solves the problem of standardizing the relay interface between lander missions and MEX. The Mars Operations Relay Service (MaROS) is intended as a central point for relay planning and post-pass analysis for all Mars landed and orbital assets. Through the first two phases of implementation, MaROS supports relay coordination through the Odyssey orbiter and the Mars Reconnaissance Orbiter (MRO). With this new software, MaROS now fully integrates the Mars Express spacecraft into the relay picture. This new software generates and manages a new set of file formats that allows for relay request to MEX for forward and return link relay, including the parameters specific to MEX. Existing MEX relay planning interactions were performed via email exchanges and point-to-point file transfers. By integrating MEX into MaROS, all transactions are managed by a centralized service for tracking and analysis. Additionally, all lander missions have a single, shared interface with MEX and do not have to integrate on a mission-by mission basis. Relay is a critical element of Mars lander data management. Landed assets depend largely upon orbital relay for data delivery, which can be impacted by the availability and health of each orbiter in the network. At any time, an issue may occur to prevent relay. For this reason, it is imperative that all possible orbital assets be integrated into the overall relay picture.

Allard, Daniel A.↗

Seasonal and Interannual Variability of Tidal Mixing Signatures in Indonesian Seas from High-Resolution Sea Surface Temperature

With their complex narrow passages and vigorous mixing, the Indonesian seas provide the only low-latitude pathway between the Pacific and Indian Oceans and thus play an essential role in regulating Pacific-Indian Ocean exchange, regional air-sea interaction, and ultimately, global climate phenomena. While previous investigations using remote sensing and numerical simulations strongly suggest that this mixing is tidally driven, the impacts of monsoon and El Niño Southern Oscillation (ENSO) on tidal mixing in the Indonesian seas must play an important role. Here we use high-resolution sea surface temperature from June 2002 to June 2021 to reveal monsoon and ENSO modulations of mixing. The largest spring-neap (fortnightly) signals are found to be localized in the narrow passages/straits and sills, with more vigorous tidal mixing during the southeast (boreal summer) monsoon and El Niño than that during the northwest (boreal winter monsoon) and La Niña. Therefore, tidal mixing, which necessarily responds to seasonal and interannual changes in stratification, must also play a feedback role in regulating seasonal and interannual variability of water mass transformations and Indonesian throughflow. The findings have implications for longer-term variations and changes of Pacific–Indian ocean water mass transformation, circulation, and climate.

Indonesian seas↗

Home Energy Management System - VOLTTRON Integration

In most Home Energy Management Systems (HEMS) available in the market, different devices running different communication protocols cannot interact with each other and exchange information. As a result of this integration, the information about different devices running different communication protocol can be accessible by other agents and devices running on VOLTTRON platform. The integration process can be used by any HEMS available in the market regardless of the programming language they use. If the existing HEMS provides an Application Programming Interface (API) based on the RESTFul architecture, that API can be used for integration. Our candidate HEMS in this project is home-assistant (Hass). An agent is implemented which can communicate with the Hass API and receives information about the devices loaded on the API. The agent publishes the information it receives on the VOLTTRON message bus so other agents can have access to this information. On the other side, for each type of devices, an agent is implemented such as Climate Agent, Lock Agent, Switch Agent, Light Agent, etc. Each of these agents is subscribed to the messages published on the message bus about their associated devices. These agents can also change the status of the devices by sending appropriate service calls to the API. Other agents and services on the platform can also access this information and coordinate their decision-making process based on this information.

Zandi, Helia↗

Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control

Lithium-ion batteries (LIBs) not only power most of today’s hybrid electric vehicles (HEV) and electric vehicles (EV) but also are considered as a very promising system for grid-level storage. Large-scale applications for LIBs require substantial improvement in energy density, cost, and lifetime. Layered Li(NixMnyCoz)O2 (NMC, x+y+z=1) materials from solid-solution approaches to LiMO2 (M = Ni, Mn, Co, etc) are the most promising candidates for their high reversible capacity, better environmental compatibility, and lower cost compared with the traditional LiCoO2. In order to further boost Li storage capacity, a great deal of attention has been directed toward developing Ni-rich NMCs. However, structural disorder as a result of Ni/Li exchange in octahedral sites becomes a critical issue when Ni content increases to high values, as it leads to a detrimental effect on Li diffusivity, cycling stability, first-cycle efficiency, and overall electrode performance. Increasing efforts have been dedicated to improving the electrochemical performance of NMC materials via reduction of cationic mixing. Therefore, it is important to summarize this research field and provide in-depth insight into impact of Ni/Li disorder on electrochemical characteristics in layered NMC materials and its origin to accelerate the future development of NMC materials with high performance. In this Account, we start by analyzing the impact of Ni/Li disorder on electrochemical characteristics in layered NMC materials. The antisite Ni in the Li layer can limit the rate performance by impeding the Li-ion transport. It will also degrade the cycling stability by inducing the anisotropic stress in the bulk structure. Nevertheless, the antisite Ni-ions don’t always bring drawbacks to the electrochemical performance, some studies including our works found that it can improve the thermal stability and the cycling structure stability of Ni-rich NMC materials. We next discussed the driving forces and the kinetic advantages accounting for the Ni/Li exchange and summarized that the steric effect of cation size and the magnetic interactions between TM cations are the two main driving forces to promote the Ni/Li exchange during synthesis procedure and the electrochemical cycling, and the low energy barrier of Ni2+ migration from the 3a site in TM layer to 3b site in Li layer further provides the kinetic advantage. Based on above understandings, we reviewed the progress made to control the Ni/Li disorder and summarized three main ways: (i) suppressing the driving force from the steric effect by ion exchange; (ii) tuning the magnetic interaction by cationic substitution; (iii) kinetic controlling of Ni migration. Finally, our brief outlooks on the future development of controlling the Ni/Li disorder in NMC materials are provided. It is believed that this Account will provide significant understanding and inspirations toward developing high-performance NMC materials with controlled Ni/Li disorder.

Zheng, Jiaxin↗