Search NASA⌕ Search

SEARCH · Search NASA

Results for “Measurement Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

A Wide Field of View Plasma Spectrometer

Here we present a fundamentally new type of space plasma spectrometer, the wide field of view plasma spectrometer, whose field of view is >1.25π ster using fewer resources than traditional methods. The enabling component is analogous to a pinhole camera with an electrostatic energy-angle filter at the image plane. Particle energy-per-charge is selected with a tunable bias voltage applied to the filter plate relative to the pinhole aperture plate. For a given bias voltage, charged particles from different directions are focused by different angles to different locations. Particles with appropriate locations and angles can transit the filter plate and are measured using a microchannel plate detector with a position-sensitive anode. Full energy and angle coverage are obtained using a single high-voltage power supply, resulting in considerable resource savings and allowing measurements at fast timescales. Lastly, we present laboratory prototype measurements and simulations demonstrating the instrument concept and discuss optimizations of the instrument design for application to space measurements.

47 OTHER INSTRUMENTATION↗

Using standard calibrated geometries to characterize a coaxial high purity germanium gamma detector for Monte Carlo simulations

A detector model optimization procedure based on matching Monte Carlo simulations with measurements for two experimentally calibrated sample geometries which are frequently used in radioactivity measurement laboratories results in relative agreement within 5% between simulated and measured efficiencies for a high purity germanium detector. The optimization procedure indicated that the increase in dead layer thickness is largely responsible for a detector efficiency decrease in time. The optimized detector model allows Monte Carlo efficiency calibration for all other samples of which the geometry and bulk composition is known. The presented method is a competitive and economic alternative to more elaborate detector scanning methods and results in a comparable accuracy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fisher information and asymptotic normality in system identification for quantum Markov chains

This paper deals with the problem of estimating the coupling constant {theta} of a mixing quantum Markov chain. For a repeated measurement on the chain's output we show that the outcomes' time average has an asymptotically normal (Gaussian) distribution, and we give the explicit expressions of its mean and variance. In particular, we obtain a simple estimator of {theta} whose classical Fisher information can be optimized over different choices of measured observables. We then show that the quantum state of the output together with the system is itself asymptotically Gaussian and compute its quantum Fisher information, which sets an absolute bound to the estimation error. The classical and quantum Fisher information are compared in a simple example. In the vicinity of {theta}=0 we find that the quantum Fisher information has a quadratic rather than linear scaling in output size, and asymptotically the Fisher information is localized in the system, while the output is independent of the parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Approximate simulation of quantum channels

Earlier, we proved a duality between two optimizations problems [Phys. Rev. Lett. 104, 120501 (2010)]. The primary one is, given two quantum channels M and N, to find a quantum channel R such that R White-Bullet N is optimally close to M as measured by the worst-case entanglement fidelity. The dual problem involves the information obtained by the environment through the so-called complementary channels M and N, and consists in finding a quantum channel R' such that R Prime White-Bullet cM is optimally close to N. It turns out to be easier to find an approximate solution to the dual problem in certain important situations, notably when M is the identity channel - the problem of quantum error correction - yielding a good near-optimal worst-case entanglement fidelity as well as the corresponding near-optimal correcting channel. Here we provide more detailed proofs of these results. In addition, we generalize the main theorem to the case where there are certain constraints on the implementation of R, namely, on the number of Kraus operators. We also offer a simple algebraic form for the near-optimal correction channel in the case M=id. For approximate error correction, we show that any {epsilon}-correctable channel is, up to appending an ancilla, {epsilon}-close to an exactly correctable one. We also demonstrate an application of our theorem to the problem of minimax state discrimination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitivity to measure the anomalous gauge couplings of the Higgs boson via W{sup +}W{sup +} scattering at the CERN LHC

A sensitive way to test the anomalous HVV (V=W{sup {+-}},Z{sup 0}) couplings via pp{yields}W{sup +}W{sup +}jj{yields}l{sup +}{nu}l{sup +}{nu}jj at LHC was proposed by Zhang, Kuang, He, and Yuan [Phys. Rev. D 67, 114024 (2003)]. We studied the sensitivity to measure the anomalous gauge couplings of Higgs boson with optimized cuts. In this way, the sensitivity can be enhanced. Based on the optimized cuts and distribution of {delta}Pt(ll), the measurement of the couplings can be further improved with a binned maximum likelihood fit. It shows that, with an integrated luminosity of 300 fb{sup -1}, the anomalous HWW and HZZ couplings can be measured at the level of 0.007-0.032 and 0.007-0.013 TeV{sup -1}, respectively, for the linearly realized effective Lagrangian.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimized Swinging Door Algorithm for Wind Power Ramp Event Detection: Preprint

Significant wind power ramp events (WPREs) are those that influence the integration of wind power, and they are a concern to the continued reliable operation of the power grid. As wind power penetration has increased in recent years, so has the importance of wind power ramps. In this paper, an optimized swinging door algorithm (SDA) is developed to improve ramp detection performance. Wind power time series data are segmented by the original SDA, and then all significant ramps are detected and merged through a dynamic programming algorithm. An application of the optimized SDA is provided to ascertain the optimal parameter of the original SDA. Measured wind power data from the Electric Reliability Council of Texas (ERCOT) are used to evaluate the proposed optimized SDA.

17 WIND ENERGY↗

An Integrated Approach To Offshore Wind Energy Assessment: Great Lakes 3D Wind Experiment

This grant supported fundamental research into the characterization of flow parameters of relevance to the wind energy industry focused on offshore and the coastal zone. A major focus of the project was application of the latest generation of remote sensing instrumentation and also integration of measurements and numerical modeling to optimize characterization of time-evolving atmospheric flow parameters in 3-D. Our research developed a new data-constrained Wind Atlas for the Great Lakes, and developed new insights into flow parameters in heterogeneous environments. Four experiments were conducted during the project: At a large operating onshore wind farm in May 2012; At the National Renewable Energy Laboratory National Wind Technology Center (NREL NWTC) during February 2013; At the shoreline of Lake Erie in May 2013; and At the Wind Energy Institute of Canada on Prince Edward Island in May 2015. The experiment we conducted in the coastal zone of Lake Erie indicated very complex flow fields and the frequent presence of upward momentum fluxes and resulting distortion of the wind speed profile at turbine relevant heights due to swells in the Great Lakes. Additionally, our data (and modeling) indicate the frequent presence of low level jets at 600 m height over the Lake and occasions when the wind speed profile across the rotor plane may be impacted by this phenomenon. Experimental data and modeling of the fourth experiment on Prince Edward Island showed that at 10-14 m escarpment adjacent to long-overseas fetch the zone of wind speed decrease before the terrain feature and the increase at (and slightly downwind of) the escarpment is ~3–5% at turbine hub-heights. Additionally, our measurements were used to improve methods to compute the uncertainty in lidar-derived flow properties and to optimize lidar-scanning strategies. For example, on the basis of the experimental data we collected plus those from one of our research partners we advanced a new methodology to estimate a priori the uncertainty in wind speed retrievals from arc scans based on site characteristics such as wind velocity, turbulence intensity and proposed scan geometry. Insights regarding use of remote sensing technologies deriving from project experiments were used to compile a best practice document http://doi.org/10.7298/X4QV3JGF for measuring wind speeds and turbulence offshore through in-situ and remote sensing technologies. A project-specific web-site was developed and is available at: http://www.geo.cornell.edu/eas/PeoplePlaces/Faculty/spryor/DoE_AIATOWEA/index.html

17 WIND ENERGY↗

Surpassing millisecond coherence in on chip superconducting quantum memories by optimizing materials and circuit design

The performance of superconducting quantum circuits for quantum computing has advanced tremendously in recent decades; however, a comprehensive understanding of relaxation mechanisms does not yet exist. In this work, we utilize a multimode approach to characterizing energy losses in superconducting quantum circuits, with the goals of predicting device performance and improving coherence through materials, process, and circuit design optimization. Using this approach, we measure significant reductions in surface and bulk dielectric losses by employing a tantalum-based materials platform and annealed sapphire substrates. With this knowledge we predict the relaxation times of aluminum- and tantalum-based transmon qubits, and find that they are consistent with experimental results. We additionally optimize device geometry to maximize coherence within a coaxial tunnel architecture, and realize on-chip quantum memories with single-photon Ramsey times of 2.0 – 2.7 ms, limited by their energy relaxation times of 1.0 – 1.4 ms. These results demonstrate an advancement towards a more modular and compact coaxial circuit architecture for bosonic qubits with reproducibly high coherence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A globally efficient means of distributing UTC time and frequency through GPS

Time and frequency outputs comparable in quality to the best laboratories have been demonstrated on an integrated system suitable for field application on a global basis. The system measures the time difference between 1 pulse-per-second (pps) signals derived from local primary frequency standards and from a multi-channel GPS C/A receiver. The measured data is processed through optimal SA Filter algorithms that enhance both the stability and accuracy of GPS timing signals. Experiments were run simultaneously at four different sites. Even with large distances between sites, the overall results show a high degree of cross-correlation of the SA noise. With sufficiently long simultaneous measurement sequences, the data shows that determination of the difference in local frequency from an accepted remote standard to better than 1 x 10(exp -14) is possible. This method yields frequency accuracy, stability, and timing stability comparable to that obtained with more conventional common-view experiments. In addition, this approach provides UTC(USNO MC) in real time to an accuracy better than 20 ns without the problems normally associated with conventional common-view techniques. An experimental tracking loop was also set up to demonstrate the use of enhanced GPS for dissemination of UTC(USNO MC) over a wide geographic area. Properly disciplining a cesium standard with a multi-channel GPS receiver, with additional input from USNO, has been found to permit maintaining a timing precision of better than 10 ns between Palo Alto, CA and Washington, DC.

Kusters, John A.↗

Bond stretching phonon softening and angle-resolved photoemission kinks in optimally doped Bi2Sr1:6La0:4Cu2O6+sigma superconductors

We report the first measurement of the Cu-O bond stretching phonon dispersion in optimally doped Bi2Sr1.6La0.4Cu2O6+delta using inelastic x-ray scattering. We found a softening of this phonon at q=(0.25,0,0) from 76 to 60 meV, similar to the one reported in other cuprates. A comparison with angle-resolved photoemission data on the same sample revealed an excellent agreement in terms of energy and momentum between the angle-resolved photoemission nodal kink and the soft part of the bond stretching phonon. Indeed, we find that the momentum space where a 63+-5 meV kink is observed can be connected with a vector q=(xi,0,0) with xi>= 0.22, corresponding exactly to the soft part of the bond stretching phonon.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis and improvement of the hot disk transient plane source method for low thermal conductivity materials

The hot disk transient plane source (TPS) method is a widely used standard technique (ISO 22007-2) for the characterization of thermal properties of materials, especially the thermal conductivity, k. Despite its well-established reliability for a wide variety of common materials, the hot disk TPS method is also known to suffer from a substantial systematic errors when applied to low-k thermal insulation materials. Here, we present a combined numerical and experimental study on the influence of the geometry of hot disk sensor on measured value of low-k materials. We demonstrate that the error is strongly affected by the finite thickness and thermal mass of the sensor's insulation layer was well as the corresponding increase of the effective heater size beyond the radius of the embedded metal heater itself. We also numerically investigate the dependence of the error on the sample thermal properties, confirming that the errors are worse in low-k samples. A simple correction function is also provided, which converts the apparent (erroneous) result from a standard hot disk TPS measurement to a more accurate value. A standard polyimide sensor was also optimized using both wet and dry etching to provide more accurate measurement directly. Experimentally corrected value of k for Airloy x56 aerogel and a commercial silica aerogel using the numerical correction factor derived based on the standard TPS sensor is in excellent agreement with the directly measured value from the TPS sensor using the optimized polyimide sensor. Finally, both of these methods can reduce the errors to less than 4% as compared to around 40% error of overestimation from raw values measured with the pristine sensor. Such results show that both the numerical correction to a pristine senor or an optimized sensor are capable of providing highly accurate value of thermal conductivity for such materials.

36 MATERIALS SCIENCE↗

Optimizing Nuclear Reaction Analysis (NRA) using Bayesian Experimental Design

Nuclear Reaction Analysis with {sup 3}He holds the promise to measure Deuterium depth profiles up to large depths. However, the extraction of the depth profile from the measured data is an ill-posed inversion problem. Here we demonstrate how Bayesian Experimental Design can be used to optimize the number of measurements as well as the measurement energies to maximize the information gain. Comparison of the inversion properties of the optimized design with standard settings reveals huge possible gains. Application of the posterior sampling method allows to optimize the experimental settings interactively during the measurement process.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Validation of Inverse Methods Applied to Forensic Analysis of Spent Fuel

Inverse depletion/decay methods are useful tools for application to nuclear forensics. Previously, inverse methods were applied to the generic case of predicting the burnup, initial enrichment, and cooling time for selected spent nuclear fuels based on measured actinide and fission product concentrations. These existing measurements were not developed or optimized for use by these inverse techniques, and hence previous work demonstrated the prediction of only the fuel burnup, initial enrichment, and cooling time. Previously, nine spent fuel samples from an online data compilation were randomly selected for study. This work set out to demonstrate the full prediction capabilities using measured isotopic data, but with a more deliberate selection of fuel samples. The current approach is to evaluate nuclides within the same element to see if complementary information can be obtained in addition to the reactor burnup, enrichment, and cooling. Specifically, the reactor power and the fuel irradiation time values are desired to achieve the maximum prediction capabilities of these techniques.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Vertex Reordering for Real-world Graphs and Applications: An Empirical Evaluation

Vertex reordering is a way to improve locality in graph computations. Given an input (or ``natural'') order, reordering aims to compute an alternate permutation of the vertices that is aimed at maximizing a locality-based objective. Given decades of research on this topic, there are tens of graph reordering schemes, and there are also several linear arrangement ``gap'' measures for treatment as objectives. However, a comprehensive empirical analysis of the efficacy of the ordering schemes against the different gap measures, and against real-world applications is currently lacking. In this study, we present an extensive empirical evaluation of up to 11 ordering schemes, taken from different classes of approaches, on a set of 34 real-world graphs emerging from different application domains. Our study is presented in two parts: a) a thorough comparative evaluation of the different ordering schemes on their effectiveness to optimize different linear arrangement gap measures, relevant to preserving locality; and b) extensive evaluation of the impact of the ordering schemes on two real-world, parallel graph applications, namely, community detection and influence maximization. Our studies show a significant divergence among the ordering schemes (up to $40\times$ between the best and the poor) in their effectiveness to reduce the gap measures; and a wide ranging impact of the ordering schemes on various aspects including application runtime (up to $4\times$), memory and cache use, load balancing, and parallel work and efficiency. The comparative study also help reveal the nuances of a parallel environment (compared to serial) on the ordering schemes and their role in optimizing applications.

Barik, Reet↗

Improving Empirical Magnetic Field Models by Fitting to In Situ Data Using an Optimized Parameter Approach

A method for comparing and optimizing the accuracy of empirical magnetic field models using in situ magnetic field measurements is presented in this paper. The optimization method minimizes a cost function—τ—that explicitly includes both a magnitude and an angular term. A time span of 21 days, including periods of mild and intense geomagnetic activity, was used for this analysis. A comparison between five magnetic field models (T96, T01S, T02, TS04, and TS07) widely used by the community demonstrated that the T02 model was, on average, the most accurate when driven by the standard model input parameters. The optimization procedure, performed in all models except TS07, generally improved the results when compared to unoptimized versions of the models. Additionally, using more satellites in the optimization procedure produces more accurate results. This procedure reduces the number of large errors in the model, that is, it reduces the number of outliers in the error distribution. The TS04 model shows the most accurate results after the optimization in terms of both the magnitude and direction, when using at least six satellites in the fitting. It gave a smaller error than its unoptimized counterpart 57.3% of the time and outperformed the best unoptimized model (T02) 56.2% of the time. Its median percentage error in |B| was reduced from 4.54% to 3.84%. Finally, the difference among the models analyzed, when compared in terms of the median of the error distributions, is not very large. However, the unoptimized models can have very large errors, which are much reduced after the optimization.

58 GEOSCIENCES↗

VISAR Analysis in the Frequency Domain

VISAR measurements are typically analyzed in the time domain, where velocity is approximately proportional to fringe shift. Moving to the frequency domain clarifies the limitations of this approximation and suggests several improvements. For example, optical dispersion preserves high-frequency information, so a zero-dispersion (air delay) interferometer does not provide optimal time resolution. Combined VISAR measurements can also improve time resolution. With adequate bandwidth and reasonable noise levels, it is quite possible to achieve better resolution than the VISAR approximation allows.

36 MATERIALS SCIENCE↗

Designing optimal experiments: an application to proton Compton scattering

Interpreting measurements requires a physical theory, but the theory’s accuracy may vary across the experimental domain. To optimize experimental design, and so to ensure that the substantial resources necessary for modern experiments are focused on acquiring the most valuable data, both the theory uncertainty and the expected pattern of experimental errors must be considered. We develop a Bayesian approach to this problem, and apply it to the example of proton Compton scattering. Chiral Effective Field Theory (χEFT) predicts the functional form of the scattering amplitude for this reaction, so that the electromagnetic polarizabilities of the nucleon can be inferred from data. With increasing photon energy, both experimental rates and sensitivities to polarizabilities increase, but the accuracy of χEFT decreases. Our physics-based model of χEFT truncation errors is combined with present knowledge of the polarizabilities and reasonable assumptions about experimental capabilities at HI γ S and MAMI to assess the information gain from measuring specific observables at specific kinematics, i.e. to determine the relative amount by which new data are apt to shrink uncertainties. The strongest gains would likely come from new data on the spin observables Σ 2x and Σ 2x' at ω≃140 to 200 MeV and 40° to 120°. These would tightly constrain γ E1E1 –γ E1M2 . New data on the differential cross section between 100 and 200 MeV and over a wide angle range will substantially improve constraints on α E1 –β M1 , γ π and γ M1M1 –γ M1E2 . Good signals also exist around 160 MeV for Σ 3 and Σ 2z' . As a result, such data will be pivotal in the continuing quest to pin down the scalar polarizabilities and refine understanding of the spin polarizabilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rossi Alpha Measurements – Rapid Organic (n, $\gamma$) Discrimination Detector (RAM-RODD) system capabilities

The Rossi Alpha Measurements–Rapid Organic (n, $\gamma$) Discrimination Detector (RAM-RODD) is an array organic scintillation detectors that has been optimized for use in neutron noise measurements. This report details the capability of the system including the method of energy calibration, pulse shape discrimination, and time resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗