Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS RELAXATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Coupled hydromechanical and electromagnetic disturbances in unsaturated porous materials

[1] A theory of cross-coupled flow equations in unsaturated soils is necessary to predict (1) electroosmotic flow with application to electroremediation and agriculture, (2) the electroseismic and the seismoelectric effects to develop new geophysical methods to characterize the vadose zone, and (3) the streaming current, which can be used to investigate remotely ground water flow in unsaturated conditions in the capillary water regime. To develop such a theory, the cross-coupled generalized Darcy and Ohm constitutive equations of transport are extended to unsaturated conditions. This model accounts for inertial effects and for the polarization of porous materials. Rather than using the zeta potential, like in conventional theories for the saturated case, the key parameter used here is the quasi-static volumetric charge density of the pore space, which can be directly computed from the quasi-static permeability. The apparent permeability entering Darcy’s law is also frequency dependent with a critical relaxation time that is, in turn, dependent on saturation. A decrease of saturation increases the associated relaxation frequency. The final form of the equations couples the Maxwell equations and a simplified form of two-fluid phases Biot theory accounting for water saturation. A generalized expression of the Richard equation is derived, accounting for the effect of the vibration of the skeleton during the passage of seismic waves and the electrical field. A new expression is obtained for the effective stress tensor. The model is tested against experimental data regarding the saturation and frequency dependence of the streaming potential coupling coefficient. The model is also adapted for two-phase flow conditions and a numerical application is shown for water flooding of a nonaqueous phase liquid (NAPL, oil) contaminated aquifer. Seismoelectric conversions are mostly taking place at the NAPL (oil)/water encroachment front and can be therefore used to remotely track the position of this front. This is not the case for other geophysical methods.

58 GEOSCIENCES↗

X-ray Scattering Measurements of Particle Orientation in a Sheared Polymer/Clay Dispersion

We report steady and transient measurements of particle orientation in a clay dispersion subjected to shear flow. An organically modified clay is dispersed in a Newtonian polymer matrix at a volume fraction of 0.02, using methods previously reported by Mobuchon et al. (Rheol Acta 46: 1045, 2007). In accord with prior studies, mechanical rheometry shows yield stress-like behavior in steady shear, while time dependent growth of modulus is observed following flow cessation. Measurements of flow-induced orientation in the flow-gradient plane of simple shear flow using small-angle and wide-angle X-ray scattering (SAXS and WAXS) are reported. Both SAXS and WAXS reveal increasing particle orientation as shear rate is increased. Partial relaxation of nanoparticle orientation upon flow cessation is well correlated with time-dependent changes in complex modulus. SAXS and WAXS data provide qualitatively similar results; however, some quantitative differences are attributed to differences in the length scales probed by these techniques.

36 MATERIALS SCIENCE↗

Finite temperature properties of uranium mononitride

Uranium mononitride (UN) is a promising nuclear fuel that combines the advantageous properties of readily used UO 2 and uranium alloys, such as high melting temperature and high uranium density, and thermal conductivity, respectively. A better understanding of UN behavior at operating temperatures can be obtained from finite temperature data, such as elastic properties. To get this information, ab initio molecular dynamics (AIMD) simulations were performed at five different temperatures using constant volume (NVT) and constant pressure (NPT) ensembles. Initially, the performance of PBE functional in reproducing experimental crystallographic properties and magnetic ordering is assessed. The finite temperature phonon dispersions are calculated using NVT simulation results, which show a softening of the phonon modes with increasing temperature. The NPT results are used to obtain the thermal expansion of UN and finite temperature electronic properties. The calculated thermal expansion is compared with our measurements using neutron diffraction. Additionally, the temperature dependent elastic properties of UN are evaluated using the strain-stress method in AIMD simulations, indicating that UN becomes softer and more compressible with increasing temperature. Also, the calculated Young’s modulus slope is in very good agreement with the experiment. The finite temperature heat capacity and electronic thermal conductivity are calculated from AIMD simulations, which are in better agreement with the experiment than the heat capacity and thermal conductivity calculated using the structures relaxed at 0K. Finally, the thermal diffusivity from AIMD has opposite temperature dependence compared to experimental results, which we argued comes from the underestimated electronic thermal conductivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Numerical solution of the Navier-Stokes equations for high Reynolds number incompressible turbulent flow

The full Navier-Stokes equations for incompressible turbulent flow must be solved to accurately represent all flow phenomena which occur in a high Reynolds number incompressible flow. A two layer algebraic eddy viscosity turbulence model is used to represent the Reynolds stress in the primitive variable formulation. The development of the boundary-fitted coordinate systems makes the numerical solution of these equations feasible for arbitrarily shaped bodies. The nondimensional time averaged Navier-Stokes equations, including the turbulence mode, are represented by finite difference approximations in the transformed plane. The resulting coupled system of nonlinear algebraic equations is solved using a point successive over relaxation iteration. The test case considered was a NACA 64A010 airfoil section at an angle of attack of two degrees and a Reynolds number of 2,000,000.

Thompson, D. S.↗

InAs/Ga(1-x)In(x)Sb superlattices for infrared detector applications

The successful growth of InAs/Ga(1-x)In(x)Sb superlattices and their optical and structural characterization is discussed. Samples were grown by molecular beam epitaxy at fairly low substrate temperatures (less than 400 C). Structural quality was assessed by reflection high energy electron difrraction, transmission electron microscopy, and x ray diffraction. Excellent structures were achieved for growth on thick, strain relaxed GaSb buffer layers on GaAs substrates, despite a residual threading dislocation density of 10(exp 9)cm(exp -2) originating at the GaSb/GaAs interface. Despite a lattice mismatch of 1.7 percent, InAs/Ga(0.75)In(0.25)Sb superlattices are observed to be free of misfit dislocations at the thicknesses examined here, owing to the close lattice match between the superlattice and GaSb, which evenly distributes compressive and tensile stresses between the InAs and Ga(0.75)In(0.25)Sb layers. Photoluminescence and photoconductivity measurements indicate that the energy gaps of the strain-layer superlattices are smaller than those of InAs/GaSb superlattices with the same layer thicknesses, and are in agreement with the theoretical predictions of Smith and Mailhiot. Energy gaps of 80 to 250 meV (15 to 5 microns) have been measured for InAs/Ga(0.75)In(0.25)Sb superlattices with 45 to 25 A/25 A layer thickness. Results demonstrate that far-infrared cutoff wavelengths are compatible with the thin superlattice layers required for strong optical absorption in type-II superlattices.

Miles, Richard H.↗

An on-orbit viewpoint of life sciences research

As a Payload Specialist and a life science researcher, I want to present several issues that impact life science research in space. During early space station operations, life science and other experiments will be conducted in a time-critical manner and there will be the added duties of both space shuttle and space station systems operation (and the concomittent training overhead). Life sciences research is different from other science research done in space because the crew is involved both as an operator and as a subject. There is a need for pre- and post-flight data collection as well as in flight data collection. It is imperative that the life science researcher incorporate the crew members into their team early enough in the training cycle to fully explain the science and to make the crew aware of the importance and sensitivities of the experiment. During the pre-flight phase, the crew is incredibly busy with a myriad of duties. Therefore, it is difficult to get 'pristine' subjects for the baseline data collection. There are also circadian shifts, travel, and late nights to confound the data. During this time it is imperative that the researcher develop, along with the crew, a realistic estimate of crew-time required for their experiment. In flight issues that affect the researcher are the additional activities of the crew, the stresses inherent in space flight, and the difficulty of getting early in-flight data. During SSF activities, the first day or two will be taken up with rendezvous and docking. Other issues are the small number of subjects on any given flight, the importance of complete and concise procedures, and the vagaries of on-board data collection. Post flight, the crew is tired and experiences a 'relaxation.' This along with circadian shifts and rapid re-adaptation to 1-g make immediate post-flight data collection difficult. Finally, the blending of operational medicine and research can result in either competition for resources (crew time, etc.) or influence on the physiological state of the crew. However, the unique opportunity to conduct research in an environment that cannot be duplicated on Earth outweighs the 'challenges' that exist for space life researchers.

Lichtenberg, Byron K.↗

Stress Analysis of Composite Cylindrical Shells With an Elliptical Cutout

A special-purpose, semi-analytical solution method for determining the stress and deformation fields in a thin laminated-composite cylindrical shell with an elliptical cutout is presented. The analysis includes the effects of cutout size, shape, and orientation; nonuniform wall thickness; oval-cross-section eccentricity; and loading conditions. The loading conditions include uniform tension, uniform torsion, and pure bending. The analysis approach is based on the principle of stationary potential energy and uses Lagrange multipliers to relax the kinematic admissibility requirements on the displacement representations through the use of idealized elastic edge restraints. Specifying appropriate stiffness values for the elastic extensional and rotational edge restraints (springs) allows the imposition of the kinematic boundary conditions in an indirect manner, which enables the use of a broader set of functions for representing the displacement fields. Selected results of parametric studies are presented for several geometric parameters that demonstrate that analysis approach is a powerful means for developing design criteria for laminated-composite shells.

Nemeth, M. P.↗

Local wave-number model for inhomogeneous two-fluid mixing

We analyze the local wave-number (LWN) model, a two-point spectral closure model for turbulence, as applied to the Rayleigh-Taylor (RT) instability, the flow induced by the relaxation of a statically-unstable density stratification. Model outcomes are validated against data from 3D simulations of the RT instability. In the first part of the study we consider the minimal model terms required to capture inhomogeneous mixing and show that this version, with suitable model coefficients, is sufficient to capture the evolution of important mean global quantities including mix-width, turbulent mass flux velocity, and Reynolds stress, if the start time is chosen such that the earliest transitions are avoided. However, this simple model does not permit the expected finite asymptote of the density-specific-volume covariance b. In the second part of the study, we investigate two forms for a source term for the evolution of the spectrum of density-specific-volume covariance for the LWN model. The first includes an empirically motivated calibration of the source to achieve the final asymptotic state of constant b. Here, the second form does not require calibration but, in conjunction with enhanced diffusion and drag captures the full evolution of all the dynamical quantities, namely, the mix-layer growth, turbulent mass-flux velocity, Reynolds stress, as well as the desired behavior of b.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Postseismic rebound due to creep of the lower lithosphere and asthenosphere

Postseismic surface deformations are attributed to the inelastic flow of the subcrustal regions of the Earth following an earthquake. A multilayer representation of the Earth's rheological properties is used in conjunction with a finite element computational scheme to calculate time dependent displacements and strains subsequent to a strike slip earthquake. The deviatoric stress strain relations for the uppermost layer is assumed elastic. Lower layers are assumed to be, in order of increasing depth, a standard, linear, three element, viscoelastic solid; a linear viscoelastic fluid; and another elastic solid. Physically these layers correspond to the upper lithosphere, lower lithosphere, asthenosphere, and lower mantle, respectively. Elastic dilatational properties are assumed throughout. Appreciable postseismic displacements, possibly approaching meters, for large earthquakes, arise from viscoelastic relaxation following sudden coseismic slip. Furthermore, compared to the simpler case of an elastic lithosphere over a viscoelastic asthenosphere and the near fault postseismic shear, strain is increased, by a factor of two or more in some cases, by the presence of a viscoelastic lower lithosphere. Also, the duration of postseismic straining is increased by the relatively slow relaxation of this layer.

Cohen, S. C.↗

Increased circulating trimethylamine N-oxide contributes to endothelial dysfunction in a rat model of chronic kidney disease

Highlights: • Circulating TMAO is elevated in chronic kidney disease. • Elevated TMAO in chronic kidney disease impairs endothelial function. • Elevated TMAO in chronic kidney disease reduces vascular eNOS activity. • Elevated TMAO in chronic kidney disease causes vascular oxidative stress. • Elevated TMAO in chronic kidney disease induces vascular inflammation. Chronic kidney disease (CKD) is strongly associated with increased cardiovascular risk. Impaired endothelial function, a key initiating step in the pathogenesis of cardiovascular disease, has been reported in patients with CKD, but the mechanisms responsible for endothelial dysfunction in CKD remain elusive. Emerging evidence reveals that trimethylamine-N-oxide (TMAO), a gut microbiota-generated metabolite, is involved in the pathogenesis of many cardiovascular diseases. Circulating TMAO is elevated in CKD. Here we tested the hypothesis that elevated TMAO plays a contributory role in the pathogenesis of endothelial dysfunction in CKD. Rats underwent 5/6 nephrectomy to induce CKD or sham operation, and were treated with 1.0% 3,3-Dimethyl-1-butanol (DMB, an inhibitor of trimethylamine formation) or vehicle. Eight weeks after nephrectomy and DMB treatment, circulating TMAO levels were markedly elevated in CKD-vehicle rats compared with sham-vehicle rats, but were reduced in CKD-DMB rats. Acetylcholine-induced endothelium-dependent vasodilation was impaired in CKD-vehicle rats compared with sham-vehicle rats as indicated by reduced maximal relaxation (E{sub max}) and decreased area under the curve (AUC). E{sub max} and AUC were both normalized in CKD-DMB rats. No difference in sodium nitroprusside-induced endothelial-independent vasodilation was observed across groups. Molecular studies revealed that endothelial nitric-oxide synthase activity was decreased, while superoxide production and proinflammatory cytokine expression were increased in the aorta of CKD-vehicle rats compared with sham-vehicle rats. Of note, the abnormalities in above molecular parameters were completely restored in CKD-DMB rats. These results suggest that CKD elevates circulating TMAO levels, which may reduce eNOS-derived NO production by increasing vascular oxidative stress and inflammation, contributing to CKD-associated endothelial dysfunction and cardiovascular disease.

60 APPLIED LIFE SCIENCES↗

Two Sources of Nonisotropic Radiation From Underground Explosions in Granite

Significant tangential ground motion observed during underground explosions makes it difficult to distinguish them from natural earthquakes. Such motion can be generated by the source geometry and emplacement conditions, by the heterogeneous nature of the rock mass (mechanical properties may vary in space due to the presence of cracks, joints, faults, and various geologic layers) and also by the nonuniform in situ stress state. The last mechanism is increasingly important with depth when the difference in main principal stresses becomes significant. This paper is focused on the role of material strength of the rock mass in generation of nonradial motion during explosions in prestressed media. Numerical modeling of underground chemical explosions in granite at various depths has been conducted to compare two possible mechanisms of shear wave generation. The first, caused by rock mass anisotropy, is important at shallow depth. The second is related to elastic-plastic relaxation around the cavity created by the explosion. As a result, tangential motions for these two mechanisms have different signatures.

54 ENVIRONMENTAL SCIENCES↗

Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout

A special-purpose, semi-analytical solution method for determining the stress and deformation fields in a thin laminated-composite cylindrical shell with an elliptical cutout is presented. The analysis includes the effects of cutout size, shape, and orientation; non-uniform wall thickness; oval-cross-section eccentricity; and loading conditions. The loading conditions include uniform tension, uniform torsion, and pure bending. The analysis approach is based on the principle of stationary potential energy and uses Lagrange multipliers to relax the kinematic admissibility requirements on the displacement representations through the use of idealized elastic edge restraints. Specifying appropriate stiffness values for the elastic extensional and rotational edge restraints (springs) allows the imposition of the kinematic boundary conditions in an indirect manner, which enables the use of a broader set of functions for representing the displacement fields. Selected results of parametric studies are presented for several geometric parameters that demonstrate that analysis approach is a powerful means for developing design criteria for laminated-composite shells.

Oterkus, E.↗

Influence of strain and dislocations on GaSb/GaAs quantum dots: From nested to staggered band alignment

We investigate the influence of strain and dislocations on band alignment in GaSb/GaAs quantum dot systems. Composition profiles from cross-sectional scanning tunneling microscopy images are interpolated onto a finite element mesh in order to calculate the distribution of local elastic strain, which is converted to a spatially varying band alignment using deformation potential theory. Our calculations predict that dislocation-induced strain relaxation and charging lead to significant local variations in band alignment. Furthermore, misfit strain induces a transition from a nested (type I) to a staggered (type II) band alignment. Although dislocation-induced strain relaxation prevents the type I to type II transition, electrostatic charging at dislocations induces the staggered band alignment once again.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RECONNECTION-DRIVEN DYNAMICS OF CORONAL-HOLE BOUNDARIES

We investigate the effect of magnetic reconnection on the boundary between open and closed magnetic field in the solar corona. The magnetic topology for our numerical study consists of a global dipole that gives rise to polar coronal holes and an equatorial streamer belt, and a smaller active-region bipole embedded inside the closed-field streamer belt. The initially potential magnetic field is energized by a rotational motion at the photosphere that slowly twists the embedded-bipole flux. Due to the applied stress, the bipole field expands outward and reconnects with the surrounding closed flux, eventually tunneling through the streamer boundary and encountering the open flux of the coronal hole. The resulting interchange reconnection between closed and open field releases the magnetic twist and free energy trapped inside the bipole onto open field lines, where they freely escape into the heliosphere along with the entrained closed-field plasma. Thereafter, the bipole field relaxes and reconnects back down into the interior of the streamer belt. Our simulation shows that the detailed properties of magnetic reconnection can be crucial to the coronal magnetic topology, which implies that both potential-field source-surface and quasi-steady magnetohydrodynamic models may often be an inadequate description of the corona and solar wind. We discuss the implications of our results for understanding the dynamics of the boundary between open and closed field on the Sun and the origins of the slow wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Divergence-type nonlinear conformal hydrodynamics

Within the theoretical framework of divergence-type theories (DTTs), we set up a consistent nonlinear hydrodynamical description of a conformal fluid in flat space-time. DTTs go beyond second-order (in velocity gradients) theories, and are closed in the sense that they do not rely on adiabatic expansions. We show that the stress-energy tensor constructed from second-order conformal invariants is obtained from the DTT by a consistent adiabatic expansion. The DTT satisfies the second law, and is causal in a set of fluid states near equilibrium. Finally, we compare, analytically and numerically, the equations of motion of the DTT and its truncation to second-order terms for the case of boost invariant flow. Our numerical results indicate that the relaxation towards ideal hydrodynamics is significantly faster in the DTT than in the second-order theory. Not relying on a gradient expansion, our findings may be useful in the study of early-time dynamics and in the evolution of shock waves in heavy-ion collisions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three-step colloidal gelation revealed by time-resolved x-ray photon correlation spectroscopy

The gelation of PEGylated gold nanoparticles dispersed in a glycerol–water mixture is probed in situ by x-ray photon correlation spectroscopy. Following the evolution of structure and dynamics over 10 4 s, a three-step gelation process is found. First, a simultaneous increase of the Ornstein–Zernike length ξ and slowdown of dynamics is characterized by an anomalous q-dependence of the relaxation times of τ ∝q -6 and strongly stretched intermediate scattering functions. After the structure of the gel network has been established, evidenced by a constant ξ, the dynamics show aging during the second gelation step accompanied by a change toward ballistic dynamics with τ ∝ q -1 and compressed correlation functions. In the third step, aging continues after the arrest of particle motion. Our observations further suggest that gelation is characterized by stress release as evidenced by anisotropic dynamics once gelation sets in.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characteristics of Ultralow Aspect Ratio Toroidal Plasmas and Non-Solenoidal Startup and Edge Stability Studies at Near-Unity Aspect Ratio (Final Report)

This grant supported a long-term research and development program to explore the physics and technology of spherical tokamak (ST) plasma behavior at near-unity aspect ratio ( A ). The PEGASUS Toroidal Experiment is a university-scale ( R ) ~ 0.40 m, α ~ .35 m, I p ≤ 0.3 MA, B T ≤ 0.15 T) experiment that accesses A → 1, to provide large values of the normalized plasma current, I N = I p /α B T , or equivalently the toroidal field utilization factor I p / I TF . The research activities focused on: 1) developing the technique of Local Helicity Injection (LHI) as a viable means of initiating and growing an ST plasma without the use of a central solenoid; 2) exploring the equilibrium and stability properties of spherical tokamak plasmas at extremely low aspect ratio; and 3) obtaining new insights in the properties of the enhanced confinement H-mode regime at A ~ 1. The initial (Phase I) facility employed a unique high-stress central solenoid Ohmic for current drive and heating with simple magnet current waveforms. A subsequent major upgrade (Phase II) offered more flexible control of the plasma evolution along with a powerful LHI system for plasma initiation, heating and sustainment. The LHI technique consists of injection of high-density current streams into vacuum toroidal and vertical magnetic fields. These streams become unstable and support magnetic reconnection to allow the system to relax into a tokamak-like magnetic configuration. This program focused on: 1) development of electron current sources that provide sufficiently high injection currents in the challenging edge plasma region; 2) validation of theoretical limits to achievable I p arising from magnetic helicity and energy conservation plus absolute limits arising from relaxation to a minimal energy states; 3) tests of a power balance model to describe the evolution of the plasma current I p (t); and 4) study of magnetic fluctuations and their role in the I p evolution. This culminated in the production of toroidal currents of I p ≥ 0.2 MA with only ~8 kA of injected current. Operation with Ohmic induction alone in Phase I created plasmas with soft limits on the achievable I p and field utilization ( I p / I TF ~ 1) due to the onset of large low-order (2/1 or 3/2) internal resonant tearing modes. With the expanded capabilities in Phase II operation, methods employed to mitigate those modes and achieve I p / I TF > 1 were: 1) I TF ramp-downs; 2) non-solenoidal startup via LHI; and 3) extremely low I TF Ohmic operations assisted by LHI current injector pre-ionization. Extensive use of LHI-driven startup and drive for non-solenoidal operation produced favorable current profiles to stably operate tokamak plasmas with unprecedentedly high I N = I p / aB T ~ 15 and I p / I TF > 2. With strong reconnection-driven anomalous ion heating, this in turn provided access to tokamak plasmas with B t up to 100%, a world record 2 times higher than that previously achieved in advanced or spherical tokamaks. This high B t regime had a large fraction (~50%) of the plasma volume in a region of an absolute minimum- B configuration. The MHD stability limit in this regime was the ideal external kink mode without a stabilizing wall. These results provided the first demonstration of access to tokamak plasmas with very high B t , high i N , high elongation κ, and low internal inductance ℓ i , and as such served as a proof-ofprinciple for access to this long-sought ST regime. The naturally low B T needed for stability at A ≤ 1.2 reduces the L-H mode power threshold, P LH , so that H-mode plasmas were achieved with Ohmic heating alone. The power threshold for the transition to the H-mode regime was found to be 10× the accepted values from the ITER international scaling, confirming initial trends indicated by experiments on MAST and NSTX, and suggesting that the physics behind this transition is not yet fully understood. The density dependence of the transition and the observed insensitivity to whether the plasma is bounded by a limiter or magnetic divertor are consistent with the recent FM 3 model. Multiple unstable toroidal magnetic modes were measured during ELM (Edge Localized Mode) crashes, with generally lower toroidal mode numbers than seen at higher A , which was attributed to the larger peeling mode instability drive at low A . First-ever edge current profile measurements through an ELM crash showed current-carrying filaments were generated, as seen in ELM simulations and in electromagnetic blob transport theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The generalized drift flux approach: Identification of the void-drift closure law

The main characteristics and the potential advantages of generalized drift flux models are presented. In particular it is stressed that the issue on the propagation properties and on the mathematical nature (hyperbolic or not) of the model and the problem of closure are easier to tackle than in two fluid models. The problem of identifying the differential void-drift closure law inherent to generalized drift flux models is then addressed. Such a void-drift closure, based on wave properties, is proposed for bubbly flows. It involves a drift relaxation time which is of the order of 0.25 s. It is observed that, although wave properties provide essential closure validity tests, they do not represent an easily usable source of quantitative information on the closure laws.

Boure, J. A.↗