Search NASA⌕ Search

SEARCH · Search NASA

Results for “SUPERCONDUCTING MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Equilibrium Properties of the Mixed State in Superconducting Niobium in a Transverse Magnetic Field: Experiment and Theoretical Model

Equilibrium magnetic properties of the mixed state in type II superconductors were studied on high-purity film and single-crystal niobium samples with different Ginzburg-Landau parameters in perpendicular and parallel magnetic fields using dc magnetometry and scanning Hall-probe microscopy. The magnetization curve for samples with unity demagnetizing factor (slabs in perpendicular field) was obtained for the first time. It was found that none of the existing theories is consistent with these new data. To address this problem, a theoretical model is developed and comprehensively validated. The new model describes the mixed state in an averaged limit, i.e., without detailing the samples’ magnetic structure and therefore ignoring the surface current and interactions between the structural units (vortices). At low values of the Ginzburg-Landau parameter, it converts to the model of Peierls and London for the intermediate state in type I superconductors. The model quantitatively describes the magnetization curve for the perpendicular field and provides new insights into the properties of the mixed state, including properties of individual vortices. In particular, it suggests that description of the vortex matter in superconductors of the transverse geometry as a “gas-like” system of non-interacting vortices is more appropriate than the frequently used solid-like scenarios.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting film with randomly magnetized dots : a realization of the two-dimensional XY model with random phase shifts.

We consider a thin superconducting film with randomly magnetized dots on top of it. The dots produce a disordered pinning potential for vortices in the film. We show that for dots with permanent and random magnetization normal or parallel to the film surface, our system is an experimental realization of the two-dimensional XY model with random phase shifts. The low-temperature superconducting phase, that exists without magnetic dots, survives in the presence of magnetic dots for sufficiently small disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phenomenological model of the third-harmonic magnetic response due to superconducting fluctuations: Application to Sr 2 RuO 4

Here, we employ the phenomenological Lawrence-Doniach model to compute the contributions of the superconducting fluctuations to the third-harmonic magnetic response, denoted here by $\bar{M_3}$, which can be measured in a precise way using ac magnetic fields and lock-in techniques. We show that, in an intermediate temperature regime, this quantity behaves as the third-order nonlinear susceptibility, which shows a power-law dependence with the reduced temperature ε = $\frac{T-T_c}{T_c}$ as ε -5/2 . Very close to T c , however, $\bar{M_3}$ saturates due to the nonzero amplitude of the ac field. We compare our theoretical results with experimental data for three conventional superconductors—lead, niobium, and vanadium—and for the unconventional superconductor Sr 2 RuO 4 (SRO). We find good agreement between theory and experiment for the elemental superconductors, although the theoretical values for the critical field systematically deviate from the experimental ones. In the case of SRO, however, the phenomenological model completely fails to describe the data, as the third-harmonic response remains sizable over a much wider reduced temperature range compared to Pb, Nb, and V. We show that an inhomogeneous distribution of T c across the sample can partially account for this discrepancy, since regions with a locally higher T c contribute to the fluctuation $\bar{M_3}$ significantly more than regions with the “nominal” T c of the clean system. However, the exponential temperature dependence of $\bar{M_3}$ first reported by Pelc et al. [Nat. Commun. 10, 2729 (2019)] is not captured by the model with inhomogeneity. We conclude that, while inhomogeneity is an important ingredient to understand the superconducting fluctuations of SRO and other perovskite superconductors, additional effects may be at play, such as non-Gaussian fluctuations or rare-region effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A 1.2 T canted cos $θ$ dipole magnet using high-temperature superconducting CORC ® wires

In this study, REBa 2 Cu 3 O x (REBCO, RE = rare earth elements) coated conductors can carry high current in high background fields, in principle enabling dipole magnetic fields beyond 20 T. Although model accelerator magnets wound with single REBCO tapes have been successfully demonstrated, magnet technology based on high-current REBCO cables for high-field accelerator magnet applications has yet to be established. We developed a two-layer canted cosθ dipole magnet with an aperture of 70 mm using 30 m long commercial Conductor on Round Core (CORC ® ) wires. The 3.1 mm diameter CORC ® wire contained 16 commercial REBCO tapes with a 30 $μ$m thick substrate. The magnet was tested at 77 and 4.2 K. It generated a peak dipole field of 1.2 T with 4.8 kA at 4.2 K with neither thermal runaway nor training. Reasonable geometric field quality and strong magnetization-current effects with multipole decay were observed. Our work demonstrated a feasible high-temperature superconducting magnet technology as a first step toward a new accelerator magnet paradigm that will enable high-field inserts for next-generation circular colliders and stand-alone magnets that can operate over a wide temperature range for a broad range of applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism and its coexistence with superconductivity in CaK(Fe 0.949 Ni 0.051 ) 4 As 4 : Muon spin rotation/relaxation studies

Here, the magnetic response of Ca K ( Fe 0.949 Ni 0.051 ) 4 As 4 was investigated by means of the muon spin rotation/relaxation. The long-range commensurate magnetic order sets in below the Néel temperature T N = 50.0 ( 5 ) K. The density-functional theory calculations have identified three possible muon stopping sites. The experimental data were found to be consistent with only one type of magnetic structure, namely, the long-range magnetic spin-vortex-crystal order with the hedgehog motif within the a b plane and the antiferromagnetic stacking along the c direction. The value of the ordered magnetic moment at T ≈ 3 K was estimated to be m Fe = 0.38 ( 11 ) μ B ( μ B is the Bohr magneton). A microscopic coexistence of magnetic and superconducting phases accompanied by a reduction of the magnetic order parameter below the superconducting transition temperature T c ≃ 9 K is observed. Comparison with 11, 122, and 1144 families of Fe-based pnictides points to existence of correlation between the reduction of the magnetic order parameter at T → 0 and the ratio of the transition temperatures T c / T N . Such correlations were found to be described by Machida's model for coexistence of itinerant spin-density-wave magnetism and superconductivity [K. Machida, J. Phys. Soc. Jpn. 50 , 2195 (1981) ; S. L. Bud'ko et al. , Phys. Rev. B 98 , 144520 (2018) ].

36 MATERIALS SCIENCE↗

Measurements of Magnetic Field Penetration in Superconducting Materials for SRF Cavities

Superconducting radiofrequency (SRF) cavities used in particle accelerators operate in the Meissner state. To achieve high accelerating gradients, the cavity material should stay in the Meissner state under high RF magnetic field without penetration of vortices through the cavity wall. The field onset of flux penetration into a superconductor is an important parameter of merit of alternative superconducting materials other than Nb which can enhance the performance of SRF cavities. There is a need for a simple and efficient technique to measure the onset of field penetration into a superconductor directly. We have developed a Hall probe experimental setup for the measurement of the flux penetration field through a superconducting sample placed under a small superconducting solenoid magnet which can generate magnetic fields up to 500 mT. The system has been calibrated and used to measure different bulk and thin film superconducting materials. This system can also be used to study SIS multilayer coatings that have been proposed to enhance the vortex penetration field in Nb cavities.

Senevirathne, I. H.↗

Design and Construction of a Prototype Solenoid Coil for MICE Coupling Magnets

A superconducting coupling solenoid mounted around four conventional RF cavities, which produces up to 2.6 T central magnetic field to keep the muons within the cavities, is to be used for the Muon Ionization Cooling Experiment (MICE). The coupling coil made from copper matrix NbTi conductors is the largest of three types of magnets in MICE both in terms of 1.5 m inner diameter and about 13MJ stored magnetic energy at full operation current of 210A. The stress induced inside the coil assembly during cool down and magnet charging is relatively high. In order to validate the design method and develop the coil winding technique with inside-wound SC splices required for the coupling coil, a prototype coil made from the same conductor and with the same diameter and thickness but only one-fourth long as the coupling coil was designed and fabricated by ICST. The prototype coil was designed to be charged to strain conditions that are equivalent or greater than would be encountered in the coupling coil. This paper presents detailed design of the prototype coil as well as developed coil winding skills. The analyses on stress in the coil assembly and quench process were carried out.

42 ENGINEERING↗

Magnetic studies of high Tc superconducting (La0.9Sr0.1)2CuO4-y

The magnetic moment of La(0.9Sr0.1)2CuO4-y was measured as a function of temperature and magnetic field, and the onset of superconductivity was found to occur at a temperature of 35 K. At 2 K, the dc magnetic susceptibility was found to reach 83 percent of perfect diamagnetism. Field studies have shown that the sample is a type-II superconductor and that the temperature dependences of the critical fiedls are anomalous. Its critical fields, kappa, and lambda(eff) are much larger than those for (La0.9Ba0.1)2CuO4-y, and their temperature dependences cannot be explained in terms of BCS theory.

Zirngiebl, E.↗

Tunnel diode resonator for precision magnetic susceptibility measurements in a mK temperature range and large DC magnetic fields

Precision radio-frequency measurements of the magnetic susceptibility using the tunnel diode resonator (TDR) technique are used to study the delicate effects in magnetic and superconducting materials. High resolution (in ppb range) measurements are particularly important for studies of the London and Campbell penetration depths in a superconductor and for the investigation of magnetic transitions in (anti)ferromagnets. Due to the small rf magnetic-excitation in a mOe range, the TDR is especially useful at low-temperatures in a mK range, if Joule heating generated in the TDR circuitry is efficiently removed and the circuit is stabilized with sub-mK precision. Unfortunately, the circuit has significant magnetic field dependence, and therefore, most of the precision TDR measurements at low-temperatures were conducted in zero magnetic field. In this work, we describe the design of a setup for precision TDR measurements in a dilution refrigerator down to ~40 mK with a 14 T superconducting magnet. The key features of our design are the separated electronics components and the placement of the most field sensitive parts in the field-compensated zone far from the center of solenoid as well as the heat-sinking at a higher temperature stage. As a result, the performance of the working setup is demonstrated using several superconductors.

47 OTHER INSTRUMENTATION↗

Reassembly and Test of High-Field Nb3Sn Dipole Demonstrator MDPCT1

In the framework of the U.S. Magnet Development Program (MDP), Fermilab has developed and tested a high-field Nb$_3$Sn dipole demonstrator MDPCT1 for a post-LHC Hadron Collider. The magnet was first assembled with a lower coil pre-load to minimize the risk of coil damage during assembly and test. In the first test the magnet reached its test goal producing a world record field of 14.1 T at 4.5 K. Next the magnet was reassembled with nominal pre-load to achieve its design field limit of 15 T. This paper describes the details of MDPCT1 inspection, design modifications and reassembly. The magnet quench performance, including training, ramp rate and temperature dependences in the temperature range of 1.9-4.5 K, is presented and discussed.

43 PARTICLE ACCELERATORS↗

Andreev transport in two-dimensional normal-superconducting systems in strong magnetic fields.

The conductance in two-dimensional (2D) normal-superconducting (NS) systems is analyzed in the limit of strong magnetic fields when the transport is mediated by the electron-hole states bound to the sample edges and NS interface, i.e., in the Integer Quantum Hall Effect regime. The Andreev-type process of the conversion of the quasiparticle current into the superflow is shown to be strongly affected by the mixing of the edge states localized at the NS and insulating boundaries. The magnetoconductance in 2D NS structures is calculated for both quadratic and Dirac-like normal state spectra. Assuming a random scattering of the edge modes we analyze both the average value and fluctuations of conductance for an arbitrary number of conducting channels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge density fluctuations with enhanced superconductivity at the proposed quantum critical point of Sr0.77⁢Ba0.23⁢Ni2⁢As2

A quantum critical point (QCP) represents a continuous phase transition at absolute zero. In unconventional superconductors, enhanced superconducting transition temperature and magnetic fluctuation strength are often observed together, indicating magnetism-mediated superconductivity. This raises the question of whether quantum fluctuations in other degrees of freedom, such as charge, could similarly boost superconductivity. However, because charge is frequently intertwined with magnetism, isolating and understanding its specific role in Cooper pair formation pose a significant challenge. Here, we report persistent charge density fluctuations (CDFs) down to 15 K in the nonmagnetic superconductor Sr0.77⁢Ba0.23⁢Ni2⁢As2, which lie near a proposed nematic QCP associated with a sixfold enhancement of superconductivity. Our results show that the quasielastic CDFs do not condense into resolution-limited Bragg peaks but, rather, display nonsaturated strength. The phonons associated with CDFs completely soften at 25 K, with their critical behavior described by the same mathematical framework as the antiferromagnetic Fermi liquid model, yielding a fitted Curie-Weiss temperature of 𝜃≈0K. Additionally, we find that the nematic fluctuations are weakly coupled to the lattice, as evidenced by the absence of softening in nematic-coupled in-plane transverse acoustic phonons. Our discovery positions Sr𝑥⁢Ba1−𝑥⁢Ni2⁢As2 as a promising candidate for charge-fluctuation-driven superconductivity.

Aczel, Adam [ORNL] (ORCID:0000000319641943)↗

Quench Analysis of EIC Central Detector (ePIC) Solenoid Magnet (MARCO)

The 2.0 T superconducting solenoid magnet (MARCO) being designed to be built for the EIC central detector (ePIC). Here, the magnet consists of three set of coil in a vacuum impregnated coil pack. Each coil pack consists of a total 554 turns winding wrapped with 6 layers of winding per coil. The coil case assembly is cooled by supercritical helium at 4.6 K. This manuscript presents quench analysis carried out on the magnet system along with the conductor stability. For the normal operation the magnet at 4.6 K and at normal operating current, the quench evaluation is carried out at 4.7 K for design assessment. The quench analysis carried out using commercial multi-physics FEA tool along an equivalent single coil quench model and the requirements for the magnet protection is also presented.

Ghoshal, Probir K. [Thomas Jefferson National Acce↗