Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

3D hierarchical Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} microspheres: Synthesis, characterization and photoluminescence

Highlights: Black-Right-Pointing-Pointer 3D hierarchical microspheres of Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O were gained with glycine-assisted hydrothermal method. Black-Right-Pointing-Pointer Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O can be transformed into Zn{sub 3}(VO{sub 4}){sub 2} with the similar morphologies by calcination. Black-Right-Pointing-Pointer The PL properties of Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} were studied. -- Abstract: Via a simple glycine-assisted hydrothermal route, large-scale 3D hierarchical Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O microspheres have been fabricated. Their purity, crystalline phase, morphologies and thermal stability were characterized by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Fourier transform IR (FTIR), scanning electron microscopy (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The SEM results indicate that the microspheres are self-assembled by numerous nanoflakes with mean thickness of 100 nm. Some factors influencing the morphologies of the Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O micro-/nanostructures have been systematically investigated, as well as quantity of glycine and the reaction time. The possible mechanism of the crystal growth and assembled procedure were also proposed. The as-prepared Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O can be transformed into Zn{sub 3}(VO{sub 4}){sub 2} with the similar morphologies by calcination in air at 600 Degree-Sign C. Furthermore, the photoluminescent properties of both Zn{sub 3}(OH){sub 2}V{sub 2}O{sub 7}{center_dot}2H{sub 2}O and Zn{sub 3}(VO{sub 4}){sub 2} were studied and exhibited different spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanosized low-temperature phases of titanium(IV) oxide with anatase and η-phase structures: composition, structure, and photocatalytic properties

Nanosized low-temperature modifications of titanium(IV) oxide with the anatase and η-phase (TiO{sub 2–x}•mH{sub 2}O) structures were prepared by the sulfate method (pH <3) and for the first time characterized by a complex of methods (X-ray diffractometry, scanning electron microscopy, IR spectroscopy, Raman spectroscopy, differential scanning calorimetry, low-temperature sorption capacity of samples to nitrogen, and differentiating dissolution). The physicochemical properties of the modifications were compared. Differences in compositions of the surface and volumes of the samples, compositions and structures of the phases (structure of η-phase is superstructure to anatase), and microstructure elements (sizes of crystallites, nanoparticles, and specific surface area; volume of nano- and ultrananopores) were revealed. The region of η-phase stability was found in the coordinates of temperature (T = 50–95 °C) and hydrolysis duration (τ = 10–80 min) and temperature (T≤200 °C) and annealing duration (τ <6 h). The distinctions in the thermal behavior of the nanosized anatase and η-phase were studied. The photocatalytic activity (PCA) is determined by the physicochemical characteristics of the samples and phases and also by the composition and structure of the decomposed substrate. In the case of difenoxazole, the PCA is affected by the compositions of the samples, phases, and surface (the presence of OH groups) and specific surface area, whereas the composition of the samples and specific surface area affect the PCA in the case of thiamethoxam.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of annealing on Curie temperature and phase transition in La{sub 0.55}Sr{sub 0.08}Mn{sub 0.37}O{sub 3} epitaxial films grown on SrTiO{sub 3} (100) substrates by reactive radio frequency magnetron sputtering

Mn-poor LaSrMnO{sub 3} (LSMO) epitaxial films were grown on SrTiO{sub 3} (100) substrates by radio frequency magnetron sputtering in an argon and oxygen gas mix, and then the samples were annealed in air at various temperatures (T{sub a}). 2 theta-chi X-ray diffraction mapping, nano-beam diffraction analysis through transmission electron microscopy, and electron back scatter diffraction through scanning electron microscopy revealed that the crystal symmetry of the LSMO films changed from monoclinic/orthorhombic to rhombohedral on annealing in air. Curie temperature (T{sub C}) of the LSMO films was found to increase with increasing T{sub a}, and become higher than the room temperature at T{sub a} ≥ 861 °C, indicating that the cause of these changes was the filling of oxygen and the transition of the crystal symmetry into rhombohedral. - Highlights: •Mn-poor LSMO changed from monoclinic/orthorhombic to rhombohedral by oxygen supply. •Mn-poor LSMO was increased T{sub C} by changed crystal symmetry, and it showed T{sub C} above RT. •Annealed in air effectively supplied O{sub 2} more than O{sub 2} gas during sputtering •EBSD is useful to evaluate crystal symmetry of complex oxide film from the substrate.

36 MATERIALS SCIENCE↗

LiMnPO4·Li3V2(PO4)3 composite cathode material derived from Mn(VO3)2 nanosheet precursor

The LiMnPO4·Li3V2(PO4)3/C composite cathode material was synthesized from Mn(VO3)2 nanosheet precursor, which was prepared by a hydrothermal method. The structure and morphology of the composite were systematically investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and scanning transmission electron microscopy (STEM), etc. The LiMnPO4·Li3V2(PO4)3/C composite material exhibits a low polarization and high specific capacity of 150.7 mAh g-1 at 0.1C in voltage range of 2.5–4.5V, and excellent cycle and rate performance for its stable nanocomposite framework. The composite material dominantly exists in the morphological shape of nanograins and nanorods, which increases the surface area and hence facilitate the electrolyte penetration. The nanoparticle components were even further identified in detail.

Lei, Zhihong↗

Microstructure and coercivity in alnico 9

Magnetic property enhancement of alnico, a rare-earth free permanent magnet, is highly dependent on both the initial microstructure and the evolution of the spinodal decomposition (SD) inside each grain during the heat treatment process. The size, shape and distribution of the magnetic FeCo-rich (α 1 ) phase embedded in continuous non-magnetic AlNi-rich (α 2 ) phase as well as a minor Cu-enriched phase residing in between are shown to be crucial in controlling coercivity. Phase and magnetic domain morphology in a commercial alnico 9 alloy was studied using a combination of structural characterization techniques, including scanning electron microscopy, electron backscatter diffraction, aberration-corrected scanning transmission electron microscopy and Lorentz microscopy. Our results showed that casting created structural nonuniformity and defects, such as porosity, TiS 2 precipitates and grain misorientation, are heterogeneously distributed, with the center section having the best crystallographic orientation and minimal defects. The optimal spinodal is a “mosaic structure”, composed of rod-shape α1 phase with {110} or {100} planar faceting and diameter of ~30–45nm. There is also a Cu-enriched phase residing at the corners of two < 110 > facets of the α1 phase. Furthermore, it was observed that grain boundary phase reverse magnetization direction at lower external magnetic field compared to the SD region inside the grain. Improving grain orientation uniformity, reducing detrimental grain boundary phase volume fraction, and the branching of the α 1 rods, as well as their diameter, are promising routes to improve energy product of alnico.

36 MATERIALS SCIENCE↗

EFFECTS OF SINTERING TEMPERATURE ON SUPERCONDUCTIVITY IN Ti-SHEATHED MgB{sub 2} WIRES

The effects of sintering temperature on the superconducting properties of Ti-sheathed MgB{sub 2} wires have been studied. The wires were fabricated by in situ powder-in-tube (PIT) method and characterized by x-ray diffraction, magnetization, scanning electron microscopy and transport measurements. Samples were sintered for 30 minutes at the following temperatures: 650 deg. C, 700 deg. C, 750 deg. C, 800 deg. C, and 850 deg. C. It is found that the cores of these wires are almost in pure MgB{sub 2} superconducting phase, indicating that the Ti-sheath does not react with Mg or B. The superconducting transition temperature T{sub c} decreases from 36 K to 34.2 K with the decrease of the sintering temperature from 850 deg. C to 650 deg. C. At 5 K and 20 K, critical current density J{sub c} peaks up for samples sintered at 800 deg. C, which is in sharp contrast with previously reported result that for Fe-sheathed MgB{sub 2} wires, J{sub c} peaks up at sintering temperature of 650 deg. C.

36 MATERIALS SCIENCE↗

Application of the Rietveld method to the analysis of anhydrous cement

X-ray powder diffraction allows direct measurement of the phase content in cement. More recently, whole pattern approaches such as the Rietveld method show an improvement in both within (repeatability) and between laboratory (reproducibility) precision. The aim of this paper is to discuss the influence of the different parameters involved in the Rietveld method and review the most recent quantitative X-ray powder diffraction studies on anhydrous cement. Comparisons with Bogue calculations, scanning electron microscopy and nuclear magnetic resonance are also discussed.

36 MATERIALS SCIENCE↗

Low-Field Nuclear Magnetic Resonance Characterization of Carbonate and Sandstone Reservoirs From Rock Spring Uplift of Wyoming

Laboratory measurements including gas (N 2 ) porosity and permeability, time-domain nuclear magnetic resonance, thin section, and scanning electron microscopy analysis were conducted to obtain petrographical and petrophysical descriptions of the Weber Sandstone and Madison Limestone at the Rock Spring Uplift, a potential carbon dioxide storage site in Southwestern Wyoming. The relationships between pore structures, such as pore geometry, pore-size distribution, pore network, and porosity/permeability are investigated. First, using thin sections combined with scanning electron microscopy for pore structures description, all samples are described in detail from the geological, petrographysical, and diagenetic viewpoint. Results show that within the Madison Limestone, pore types include intercrystalline, vuggy, moldic, or mixed (combination of all other pore types). Both moldic and vuggy pore types are associated with samples of high porosity and permeability. Nuclear magnetic resonance relaxation time distributions show either bimodal or multimodal distributions. Large relaxation time components are associated with samples with large pores, whereas small components are dominated by small pores. The T 2 geometric mean correlates well with gas permeability. Additionally, short-time diffusion coefficients (D) were measured by pulsed field gradient method using a series of gradient strengths. We found that diffusion coefficient distributions correlate with the corresponding T 2 distributions for macropores. By comparing the dominant peak position of T 2 distributions and their corresponding diffusion coefficient distributions, we predicted the surface relaxivity of different rock types. We found that surface relaxivities of Weber Sandstone samples can be well predicted, while for Madison Limestone samples, surface relaxivities are overestimated due to diffusive pore coupling effect.

58 GEOSCIENCES↗

In situ microscopy across scales for the characterization of crystal growth mechanisms: The case of europium oxalate

A better understanding of how production pathway affects the final product is required in order to produce targeted syntheses, but many of the classical ex situ techniques used for studying nanoparticle growth are unsuitable as stand-alone methods for identifying and characterizing growth mechanisms. Using a combination of high resolution transmission electron microscopy (TEM), cryogenic TEM, and fluid cell scanning electron microscopy, we monitor europium oxalate growth over the range of nanometers to tens of micrometers and identify potential crystal growth pathways. We also compare the effects of stirring during crystal growth as an example of how changing processing conditions changes growth mechanisms.

in situ SEM, Cryo TEM, lanthanide, crystal growth↗

Advanced characterization study of commercial conversion and electrocoating structures on magnesium alloys AZ31B and ZE10A

The local metal-coating interface microstructure and chemistry formed on commercial magnesium alloys Mg–3Al–1Zn (AZ31B) and Mg–1Zn–0.25Zr–<0.5Nd (ZE10A, ZEK100 type) were analyzed as-chemical conversion coated with a commercial hexafluoro-titanate/zirconate type + organic polymer based treatment (Bonderite® 5200) and a commercial hexafluoro-zirconate type + trivalent chromium Cr3 + type treatment (Surtec® 650), and after the same conversion coatings followed by electrocoating with an epoxy based coating, Cathoguard® 525. Characterization techniques included scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and cross-section scanning transmission electron microscopy (STEM). Corrosion behavior was assessed in room temperature saturated aqueous Mg(OH)2 solution with 1 wt.% NaCl. The goal of the effort was to assess the degree to which substrate alloy additions become enriched in the conversion coating, and how the conversion coating was impacted by subsequent electrocoating. Key findings included the enrichment of Al from AZ31B and Zr from ZE10A, respectively, into the conversion coating, with moderate corrosion resistance benefits for AZ31B when Al was incorporated. Varying degrees of increased porosity and modification of the initial conversion coating chemistry at the metal-coating interface were observed after electrocoating. These changes were postulated to result in degraded electrocoating protectiveness. As a result, these observations highlight the challenges of coating Mg, and the need to tailor electrocoating in light of potential degradation of the initial as-conversion coated Mg alloy surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbonaceous spheres—an unusual template for solid metal oxide mesoscale spheres: Application to ZnO spheres

A green template route for the synthesis of mesoscale solid ZnO spheres was ascertained. The protocol involves a double coating of the carbonaceous spheres with successive layers of zinc-containing species by alternating a non-ultrasound and ultrasound-assisted deposition, followed by calcination treatments. The composites were characterized by FTIR spectroscopy, thermal analysis, scanning electron microscopy while the obtained ZnO spheres by X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopy, N{sub 2} adsorption–desorption isotherms and photoluminescence investigations. A growth mechanism of the solid spheres is advanced based on these results. While the spheres' diameters and the mean size values of ZnO are independent on deposition order, the surface area and the external porosity are fairly dependent. The photoluminescence measurements showed interesting emission features, with emission bands in the violet to orange region. The spheres present high photocatalytical activity towards the degradation of phenol under UV irradiation, the main reaction being its mineralization. - Graphical abstract: A novel and eco-friendly methodology for the synthesis of mesoscale solid ZnO spheres was developed. The protocol involves a double coating of the starch-derived carbonaceous spheres with successive layers of zinc-containing species by alternating a non-ultrasound and ultrasound-assisted deposition, followed by calcination treatments. - Highlights: • ZnO solid spheres are obtained via a template route using carbonaceous spheres. • Two-step coatings of interchangeable order are used as deposition procedure. • The coating procedure influences the porosity and surface area. • ZnO spheres exhibited interesting visible photoluminescence properties. • Solid spheres showed photocatalytical activity in degradation of phenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of steel fibers on the development of alkali-aggregate reaction

This work presents the results of an experimental research concerning the use of fibers in mortar specimens subjected to alkali-aggregate reaction (AAR). Two types of steel fibers (0.16 mm diameter and 6.0 mm length, and 0.20 mm diameter and 13.0 mm length) were used with fiber volume contents of 1% and 2%. Besides the expansion accelerated tests, compressive tests and flexural tests have also been carried out to display the main mechanical characteristics of the fiber-reinforced mortars after being subjected to AAR. Moreover, the microstructure of the specimens was analyzed by scanning electron microscopy and energy dispersive X-ray. The results shown that the addition of steel fibers reduced the expansion due to AAR for the experimental conditions studied in this paper. The most expressive benefit corresponded to the addition of 13.0 mm fibers in the mixture containing 2% fiber content. This fiber volume content also corresponded to the maximum increment in the mechanical properties compared to the reference mortar, mainly for the post-cracking strength and for the toughness in bending. It was observed that the fibers have a beneficial effect on the material, without compromising its main mechanical properties.

36 MATERIALS SCIENCE↗

Influence of Ce{sup 3+} Ion Doping on Structural and Magnetic Properties of Magnesium Nanoferrite

Pure and rare earth ion Ce{sup 3+}-doped magnesium nanoferrite magnetic particles, i.e., MgFe{sub 2}O{sub 4} and MgCe{sub x}Fe{sub 2−x}O{sub 4} (x = 0.0, 0.025, 0.05, 0.075, and 0.1) were successfully fabricated using sol-gel technique, and qualitative studies were carried out using X-ray diffractometer (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), high-resolution field-emission scanning electron microscopy (HRFESEM) equipped with energy-dispersive spectroscopy (EDS), vibrating sample magnetometer (VSM), and electron paramagnetic resonance (EPR) techniques. X-ray diffraction analysis confirmed the crystalline phase of the synthesized samples with no extra phase. The crystallite size obtained from W-H plots follow the same trend as calculated using Scherrer method, and the strain decreases with increasing Ce{sup 3+} ion concentration indicating a lesser number of deformities. FTIR spectra revealed the shifting of lower-frequency band to the higher side with the larger radii Ce{sup 3+} ions. HRFESEM images reveal the reduction in stress on doping. No additional impurities are observed in synthesized samples as is confirmed by EDS analysis. The average particle size obtained by TEM are in agreement with XRD analysis. EPR studies showed an increase in g value and line width with doping. Magnetic measurements carried out at room temperature reveals the value of magnetization initially decreases up to x = 0.05 and afterwards increases with the addition of Ce{sup 3+} ions. These properties reveal superparamagnetic nature of cerium-doped magnesium nanoparticles and can be suitable for catalyst and humidity sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Green synthesis of gold nanoparticles using aqueous ethanol extract of Curcuma mangga rhizomes as reducing agent

Green synthesis of gold nanoparticles (AuNPs) had been developed as an alternative to chemical and physical methods due to its simplicity, cost effectiveness and eco-friendliness. The high biocompatibility and biostability features of AuNPs have found importance in biomedical applications in recent years. In this study, aqueous ethanol extract of Curcuma mangga rhizomes which acts as reducing and stabilizing agent was used to synthesize stable AuNPs by bioreduction of chloroauric acid. The formation of AuNPs was highlighted by the color change of the suspension from light yellow to reddish purple. Time-evolution was monitored by UV-visible spectroscopy, while surface plasmon (SP) absorption band of the AuNPs suspension was observed at a maximum absorption of 540 nm. Hydrodynamic radii and size distribution of the AuNPs in the suspension were evaluated using dynamic light scattering (DLS) and zeta potential measurement demonstrated negative surface charge. The particle size was calculated in the range of 2-30 nm using High Resolution Transmission Electron Microscopy (HRTEM). The morphology and elemental composition were further determined by Field Effect Scanning Electron Microscopy (FESEM) and Energy Dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) spectroscopy meanwhile was used to confirm the presence of AuNPs and functional groups involved in the gold bio-reduction process. Influence of the volume of extract and concentration of gold (III) chloride trihydrate (HAuCl{sub 4}.3H{sub 2}O) on the synthesis of AuNPs were also investigated. The results obtained indicate potential optimization and functionalization of AuNPs for future applications in bionanotechnology especially in the field of medicine.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanomaterial datasets to advance tomography in scanning transmission electron microscopy

Electron tomography in materials science has flourished with the demand to characterize nanoscale materials in three dimensions (3D). Access to experimental data is vital for developing and validating reconstruction methods that improve resolution and reduce radiation dose requirements. This work presents five high-quality scanning transmission electron microscope (STEM) tomography datasets in order to address the critical need for open access data in this field. The datasets represent the current limits of experimental technique, are of high quality, and contain materials with structural complexity. Included are tomographic series of a hyperbranched Co 2 P nanocrystal, platinum nanoparticles on a carbon nanofibre imaged over the complete 180° tilt range, a platinum nanoparticle and a tungsten needle both imaged at atomic resolution by equal slope tomography, and a through-focal tilt series of PtCu nanoparticles. A volumetric reconstruction from every dataset is provided for comparison and development of post-processing and visualization techniques. Researchers interested in creating novel data processing and reconstruction algorithms will now have access to state of the art experimental test data.

36 MATERIALS SCIENCE↗

Formation of conductive copper lines by femtosecond laser irradiation of copper nitride film on plastic substrates

In this paper, we report a simple method to form conductive copper lines by scanning a single-beam femtosecond pulse laser on a plastic substrate covered with copper nitride (Cu{sub 3}N) film. The Cu{sub 3}N films were prepared by DC magnetron sputtering in the presence of an Ar + N{sub 2} atmosphere at 100 °C. The influence of the laser power and scanning speed on the formed copper line width, surface features, and morphology was analyzed by means of optical microscopy, X-ray diffraction, non-contact 3D profilometer, and scanning electron microscopy. The experimental results demonstrate that low laser power and low scanning speed favor the formation of uniform and flat Cu lines. After process optimization, copper lines with a width less than 5 μm were obtained, which provides an attractive application prospect in the field of flexible electronic devices.

36 MATERIALS SCIENCE↗

Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys

The microstructure of a cobalt-base alloy (Co-Cr-Mo) obtained by the investment casting process was studied. This alloy complies with the ASTM F75 standard and is widely used in the manufacturing of orthopedic implants because of its high strength, good corrosion resistance and excellent biocompatibility properties. This work focuses on the resulting microstructures arising from samples poured under industrial environment conditions, of three different Co-Cr-Mo alloys. For this purpose, we used: 1) an alloy built up from commercial purity constituents, 2) a remelted alloy and 3) a certified alloy for comparison. The characterization of the samples was achieved by using optical microscopy (OM) with a colorant etchant to identify the present phases and scanning electron microscopy (SE-SEM) and energy dispersion spectrometry (EDS) techniques for a better identification. In general the as-cast microstructure is a Co-fcc dendritic matrix with the presence of a secondary phase, such as the M{sub 23}C{sub 6} carbides precipitated at grain boundaries and interdendritic zones. These precipitates are the main strengthening mechanism in this type of alloys. Other minority phases were also reported and their presence could be linked to the cooling rate and the manufacturing process variables and environment. - Research Highlights: {yields}The solidification microstructure of an ASTM-F75 type alloy were studied. {yields}The alloys were poured under an industrial environment. {yields}Carbides and sigma phase identified by color metallography and scanning microscopy (SEM and EDS). {yields}Two carbide morphologies were detected 'blocky type' and 'pearlite type'. {yields}Minority phases were also detected.

36 MATERIALS SCIENCE↗

Chemical and morphological changes of reusable surface insulation coatings as a function of convectively heated cyclic testing

The effects of convective heating upon reusable surface insulation coatings were studied utilizing scanning electron microscopy, X-ray fluorescence, and X-ray diffraction. Samples of coated silica, mullite, and ceramic mullite fiber were cycled in an arc plasma stream up to 15 times for 15 minutes per cycle at surface temperatures simulating those on the space shuttle vehicle. The surfaces of ceramic mullite fiber and mullite coatings were roughened substantially by the convectively heated environment while the silica was significantly smoothed after testing. Scanning electron microscopy also showed surface cracking of varying degrees in all of the coatings. The surface chemistry of the coatings as examined by X-ray fluorescence revealed that significant changes in composition were occurring during cycling, particularly within the mullite coating.

Leiser, D. B.↗