Search NASA⌕ Search

SEARCH · Search NASA

Results for “X ray diffraction analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Nanocoating of particles for optimal doping and universal enhancement of current-carrying ability in ''organic''MgB{sub 2-x}C{sub x} superconductors

The universal approach of liquid mixing has been found to produce 'organic' MgB{sub 2-x}C{sub x} superconductors with structural and supercurrent-carrying properties unattainable by other techniques. We show by transmission electron microscopy combined with energy dispersive spectroscopy that these unique properties are enabled through coating of boron particles with a nanolayer of carbon. The subsequent reaction between carbon-encapsulated boron and magnesium results in enhanced carbon content x in the crystal lattice, as determined by x-ray diffraction pattern analysis. Among various carbon-containing compounds investigated, polycarbosilane has been found to be the optimal dopant for MgB{sub 2} superconductor, producing the largest critical current density due to the formation of wide range of nanodefects with pinning properties within the MgB{sub 2} crystal lattice, as well as due to minimal formation of current-blocking layers around the grains.

36 MATERIALS SCIENCE↗

Synthesis and regulation of {alpha}-LiZnPO{sub 4}.H{sub 2}O via a solid-state reaction at low-heating temperatures

A simple and novel route for the synthesis of a lithium zinc phosphate hydrate, {alpha}-LiZnPO{sub 4}.H{sub 2}O, was studied, and the target product was obtained with LiH{sub 2}PO{sub 4}.H{sub 2}O and ZnCO{sub 3} as raw materials and polyethylene glycol-400 (PEG-400) as a surfactant via a one step solid-state reaction at room temperature (25 deg. C). The product was characterized with X-ray powder diffraction (XRD), thermogravimetric analysis and the 1st derivativative of thermogravimetric analysis (TG/DTG) and Fourier transform infrared spectroscopy (FTIR). The comparison experimental results suggested that aging temperature controlled the products of the synthesis, that is, the {alpha}-LiZnPO{sub 4}.H{sub 2}O was formed when the reaction mixture was aged at room temperature, and the {alpha}-LiZnPO{sub 4} was obtained when the reaction mixture was aged at 80 deg. C.

36 MATERIALS SCIENCE↗

XRD Analysis of Cement Paste Samples Exposed to the Simulated Environment of a Deep Repository - 12239

Portland cement materials are widely used as engineered barriers in repositories for radioactive waste. The capacity of such barriers to avoid the disposed of radionuclides to entering the biosphere in the long-term depends on the service life of those materials. Thus, the performance assessment of structural materials under a series of environmental conditions prevailing at the environs of repositories is a matter of interest. The durability of cement paste foreseen as backfill in a deep borehole for disposal of disused sealed radioactive sources is investigated in the development of the repository concept. Results are intended to be part of the body of evidence in the safety case of the proposed disposal technology. This paper presents the results of X-Ray Diffraction (XRD) Analysis of cement paste exposed to varying temperatures and simulated groundwater after samples received the radiation dose that the cement paste will accumulate until complete decay of the radioactive sources. The XRD analysis of cement paste samples realized in this work allowed observing some differences in the results of cement paste specimens that were submitted to different treatments. The cluster analysis of results was able to group tested samples according to the applied treatments. Mineralogical differences, however, are tenuous and, apart from ettringite, are hardly observed. The absence of ettringite in all the seven specimens that were kept in dry storage at high temperature had hardly occurred by natural variations in the composition of hydrated cement paste because ettringite is observed in all tested except the seven specimens. Therefore this absence is certainly the result of the treatments and could be explained by the decomposition of ettringite. Although the temperature of decomposition is about 110-120 deg. C, it may be initially decomposed to meta-ettringite, an amorphous compound, above 50 deg. C in the absence of water. Influence of irradiation on the mineralogical composition was not observed when the treatment was analyzed individually or when analyzed under the possible synergic effect with other treatments. However, the radiation dose to which specimens were exposed is only a fraction of the accumulated dose in cement paste until complete decay of some sources. Therefore, in the short term, the conditions deemed to prevail in the repository environment may not influence the properties of cement paste at detectable levels. Under the conditions presented in this work, it is not possible to predict the long term evolution of these properties. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Orthorhombic YBaCo{sub 4}O{sub 8.4} crystals as a result of saturation of hexagonal YBaCo{sub 4}O{sub 7} crystals with oxygen

Hexagonal YBaCo{sub 4}O{sub 7} crystals (sp. gr. P6{sub 3}mc, a{sub h} = 6.3058(4) Å, c{sub h} = 10.2442(7) Å, Z = 2) are saturated with oxygen to the YBaCo{sub 4}O{sub 8.4} composition and studied by X-ray diffraction (XRD) analysis. The saturation is completed by a structural first-order phase transition to orthorhombic crystals (sp. gr. Pbc2{sub 1}, a{sub o} = 31.8419(2) Å, b{sub o} = 10.9239(5) Å, c{sub o} = 10.0960(5) Å, Z = 20). The connection of two lattices is expressed in terms of the action of matrix (500/120/001) on the hexagonal basis. Five structural fragments of the same type but with different degrees of order alternate along the long axis of the oxygen-saturated orthorhombic structure. The XRD data on single crystals differ from the results obtained by other researchers on ceramic samples; possible causes of these differences are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel heteroleptic lanthanide organic frameworks containing pyridine-2,5-dicarboxylic acid and in situ generated piperazine-2,5-dicarboxylic acid from piperazine: Hydrothermal synthesis and luminescent properties

Two novel 3D lanthanide metal-organic frameworks [Ln(pydc)(pip){sub 1/2}(H{sub 2}O] (Ln=Ce (1) and Pr (2), H{sub 2}pydc=2,5-pyridinedicarboxylic acid, H{sub 2}pip=2,5-piperazinedicarboxylic acid have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis (TGA), powder X-ray diffractions (PXRD), and single-crystal X-ray diffractions. Field emission scanning electron microscopy (FESEM) was used for morphological analysis. Complexes are isostructural and feature interesting 3D frameworks. Both compounds crystallize in the monoclinic system, space group P2{sub 1}/c. Structural analyses of 1 and 2 show that Ln{sup 3+} ions connect with each other through H{sub 2}pydc and H{sub 2}pip. To the best of our knowledge, they are the first heteroleptic lanthanide polymers obtained through in situ 2,5-piperazinedicarboxylic acid syntheses. Moreover, thermal and luminescent properties of the compounds have been investigated. - Graphical abstract: Two novel 3D lanthanide metal-organic frameworks have been synthesized under hydrothermal conditions. Luminescent properties of the compounds in different temperatures have been also investigated. - Highlights: • New cerium and praseodymium coordination polymers based on N-O-bifunctional ligands have been synthesized In situ hydrothermal decarboxylation. • 2,5-pyridinedicarboxylic acid and piperazine were used as ligands. • In situ hydrothermal decarboxylation and formation of ligands were observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Full Reconstruction of a Crystal Unit Cell Structure during Coherent Femtosecond Motion

We present a complete characterization of the unit cell dynamics of a laser-excited tellurium crystal using femtosecond x-ray diffraction. The analysis offers a quantitative measure of the unit cell dynamics without making any assumptions on the symmetry of the excited-state motion. The results show a large-amplitude coherently excited A{sub 1} mode quantitatively consistent with the predictions of a density functional theory model.

36 MATERIALS SCIENCE↗

Influence Al doped ZnO nanostructure on structural and optical properties

The preparation of Al-doped ZnO (AZO) thin films prepared by the spin-coating method was reported. Preparation of AZO was conducted by annealing treatment at a temperature of 700°C. While the spin-coating process of AZO thin films were done at 2000 and 3000 rpm respectively. The structural properties of ZnO were determined by X- ray diffraction (XRD) analysis. ZnOnanostructure was formed after annealed at atemperature of 400°C.The morphology of ZnO was determined by Scanning Electron Microscopy (SEM) showed the irregular morphology about 30-50µm in size. Al doped on ZnO influenced the optical properties of those material. Increasing Al contain on ZnO cause of shifting to the lower wavelength. The optical properties of the ZnO as well as AZO films showed that higher reflectance on the ultraviolet region so those materials were used as anti-reflecting agent.Al addition significantly enhance the optical transparency and induce the blue-shift in optical bandgap of ZnO films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of c-axis oriented AlN thin films on different substrates: A review

Highly c-axis oriented AlN thin films have been deposited by reactive sputtering on different substrates. The crystallographic properties of layered film structures consisting of a piezoelectric layer, aluminum nitride (AlN), synthesized on a variety of substrates, have been examined. Aluminum nitride thin films have been deposited by reactive pulsed-DC magnetron sputtering using an aluminum target in an Ar/N{sub 2} gas mixture. The influence of the most critical deposition parameters on the AlN thin film crystallography has been investigated by means of X-ray diffraction (XRD) analysis of the rocking curve Full-Width at Half Maximum (FWHM) of the AlN-(0 0 0 2) peak. The relationship between the substrate, the synthesis parameters and the crystallographic orientation of the AlN thin films is discussed. A guide is provided showing how to optimize these conditions to obtain highly c-axis oriented AlN thin films on substrates of different nature.

36 MATERIALS SCIENCE↗

Synthesis of nanocrystalline forsterite (Mg{sub 2}SiO{sub 4}) powder by combined mechanical activation and thermal treatment

This study investigates the synthesis of single-phase nanocrystalline forsterite powder by mechanical activation with subsequent annealing. To produce forsterite powder, a mixture of talc and magnesium oxide powders was first milled by a planetary ball mill, and then annealed at 1000 and 1200 {sup o}C for 1 h. The synthesized powder was characterized by X-ray diffraction (XRD), simultaneous thermal analysis (STA), scanning electron microscopy (SEM), and atomic absorption spectrometry (AAS). The initial temperature of forsterite crystallization was reduced to about 825 {sup o}C after 20 h of mechanical activation. The forsterite powder synthesized by 5 h of mechanical activation with subsequent annealing at 1000 {sup o}C for 1 h had crystallites 40 nm in size. The particle size of this sample was less than 500 nm.

36 MATERIALS SCIENCE↗

Microwave irradiation induced band gap tuning of MoS{sub 2}-TiO{sub 2} nanocomposites

The MoS{sub 2}-TiO{sub 2} nanocomposites have been synthesized by sol-gel method and characterized by different microscopic and spectroscopic techniques. The crystallinity of these nanocomposites has been confirmed by X-ray diffraction (XRD) analysis. The Raman spectrum of MoS{sub 2}-TiO{sub 2} nanocomposites consists of three distinct peaks (E{sup 1} {sub g}, E{sup 1} {sub 2g} and A{sub 1g}) which are associated with TiO{sub 2} and MoS{sub 2}. The morphological study is carried out by scanning electron microscope. The effect of microwave irradiation on the band gap of MoS{sub 2}-TiO{sub 2} nanocomposites has been investigated; it is observed that the microwave irradiation causes decrease in the band gap of MoS{sub 2}-TiO{sub 2} nanocomposites. The microwave treated MoS{sub 2}-TiO{sub 2} thin films offers a novel process route in treating thin films for commercial applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

PbO networks composed of single crystalline nanosheets synthesized by a facile chemical precipitation method

Graphical abstract: - Highlights: • Synthesis of PbO networks through a simple chemical precipitation route. • The synthesis method is rapid and low-cost. • Each network is composed of single crystalline PbO nanosheets. • A possible growth mechanism is proposed for synthesized PbO networks. - Abstract: For the field of energy storage, nanostructured lead oxide (PbO) shows immense potential for increased specific energy and deep discharge for lead acid battery technologies. In this work, PbO networks composed of single crystalline nanosheets were synthesized utilizing a simple, low cost and rapid chemical precipitation method. The PbO networks were prepared in a single reaction vessel from starting reagents of lead acetate dehydrate, ammonium hydroxide and deionized water. Lead acetate dehydrate was chosen as a reagent, as opposed to lead nitrate, to eliminate the possibility of nitrate contamination of the final product. X-ray diffraction (XRD) analysis, high resolution scanning electron microscopy (HRSEM) and high resolution transmission electron microscopy (HRTEM) analysis were used to characterize the synthesized PbO networks. The reproducible method described herein synthesized pure β-PbO (massicot) powders, with no byproducts. A possible formation mechanism for these PbO networks is proposed. The growth is found to proceed predominately in the 〈1 1 1〉 and 〈2 0 0〉 directions while being limited in the 〈0 1 1〉 direction.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Spray-Formed 7075 Alloy During Retrogression

The mechanical properties, conductivity, microstructure, precipitation behavior and evolution process of elements and phases of spray-formed 7075 alloy during retrogression are studied by the tensile test, electric test, hardness test, transmission electron microscope (TEM), x-ray diffraction (XRD) analysis, electron-dispersive spectroscopy (EDS) and lattice parameter measurements. The results show that the mechanical properties and conductivity of the alloy can be effectively improved when treated at a suitable retrogression temperature and time. According to the TEM observations, XRD analysis, EDS and an accurate measurement of the lattice parameter, the redissolution of elements and precipitated phases can be readily observed. From the optimization selection of the RRA treatment for the 7075 alloy, the regularity of redissolution and precipitation of the elements and phases are evaluated. The ultimate tensile strength, yield strength, hardness, elongation and conductivity of the spray-formed 7075 alloy after preaging at 120 °C for 16 h, retrogression at 200 °C for 8 min and reaging at 120 °C for 24 h are 791, 736 MPa, 181 HBW, 8.5% and 22.6 MS/m, respectively.

36 MATERIALS SCIENCE↗

Monitoring of U(VI) Bioreduction after ARCADIS demonstration at Savannah River Site F-Area - 15699

The F/H Area Seepage Basins located in the center of Savannah River Site (SRS) received approximately 1.8 billion gallons of acidic waste solutions. The acidic nature of the basin waste solutions triggered the mobilization of metals and radionuclides including soluble uranium (VI). SRS F-Area sediments are acidic and composed predominantly of quartz sand with varying amounts of fine-grained minerals and iron-oxides. In 2010, ARCADIS implemented in-situ injections of a carbohydrate substrate to establish anaerobic reactive zones for metal and radionuclide remediation via the Enhanced Anaerobic Reductive Precipitation (EARP) process at the SRS F-Area (Figure 2). The addition of the molasses substrate solution to groundwater produces anaerobic conditions with redox values in the methanogenic or sulfate-reducing range conducive to the reductive precipitation of uranium. Objectives: Determine the mineral composition of SRS fine clay fractions and identify all iron-oxide phases. Establish if ferrous carbonate and ferrous sulfide compounds will be present in the sediment after the bioreduction process has occurred. The presence of these compounds will indicate that anaerobic reductive conditions were established. Determine the types of reactions that might occur in the anaerobic aquifer. Determine if conditions will return to the initial state once samples are returned to aerobic conditions. Microcosm studies were prepared with SRS sediments treated using a basal medium solution augmented with sulfate and molasses as well as a trace metal solution. To create anaerobic conditions necessary for the experiment, a vinyl anaerobic airlock chamber from COY Lab Products was used to ensure that no oxygen reached the samples. Half of the samples were augmented with sulfate in an attempt to create iron sulfide and stabilize reduced uranium. A pH evolution study was conducted to find the type of pH changes that occurred in the samples. Samples were sieved to 180 mm before X-ray Diffraction (XRD) analysis was conducted to identify any mineralogical changes in the samples. The experimental patterns were compared against known XRD patterns for siderite and pyrite. Liquid samples were filtered through 0.45 mm filters and were diluted by a factor of 200 in nitric acid (1%) for ICP-OES analysis to determine the ferrous iron concentration. XRD analysis indicated that the sediments contained quartz, kaolinite, montmorillonite, and goethite. All of the samples have followed a similar trend, with a decline in the pH values. It was noted that samples amended with sulfates had slightly higher pH than sulfate-free samples. The pH drop can be attributed to the fermentation process of molasses and the natural acidity of SRS soil used for the microcosm study. The low pH conditions are believed to have hindered the formation of bicarbonate/carbonate ions used to form the iron precipitates. XRD results confirmed the assumption that with low pH values no iron compounds would precipitate in the samples. The experimental patterns for each sample was compared with the patterns for siderite and pyrite; the results for these analyses were negative. ICP-OES analysis confirmed that there is ferrous iron present in the samples. The highest iron concentration being 13312.8 ppb for Batch 1, Sample 1-2, the lowest were in Batch 2 Samples 2,3, and 4 which may be below the calibration curve. This may also be an indication that the iron has precipitated in these samples. Future work: Conduct ICP analysis on the Batch 2 samples using a lower dilution factor. Determine the types of reactions that might occur in the anaerobic aquifer. Verify the continued sequestration of U(VI) in relation to the possible re-oxidation of minerals from the bioreduction zone. Sulfate concentrations will be examined using an ion analysis technique. Determine pH levels, sulfate concentrations, and iron concentrations after re-oxygenation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Alumina nanowire growth by water decomposition and the peritectic reaction of decagonal Al{sub 65}Cu{sub 15}Co{sub 20} quasicrystals

In this paper, the results of the Al{sub 2}O{sub 3} nanowires' growth through a chemical reaction between Al and water vapor at 1050 °C are presented. Our approach is based on two primary considerations. First, at room temperature, the Al{sub 65}Cu{sub 15}Co{sub 20} alloy is affected by the following mechanism: 2Al (s) + 3H{sub 2}O (g) → Al{sub 2}O{sub 3} (s) + H{sub 2} (g). In this reaction, the released hydrogen induces cleavage fracture of the material to form small particles. Second, the Al{sub 65}Cu{sub 15}Co{sub 20} quasicrystalline phase is transformed on heating to liquid + Al (Cu, Co) cubic phase through a peritectic reaction at 1050 °C. The Al-rich liquid then reacts with water vapor, forming Al{sub 2}O{sub 3} nanowires. X-ray diffraction (XRD) analysis shows that the formed nanowires have a hexagonal structure, and infrared analysis further confirms the presence of α-Al{sub 2}O{sub 3} phase in the final products. Transmission electron microscopy observations show that nanoparticles are present at the end of nanowires, suggesting the VLS growth mechanism. Elemental analysis by energy dispersive spectroscopy (EDS) indicates that the particles at the tip of the nanowires are mainly formed by Co and Cu alloying elements and small amounts of Al. Electron microscopy observations showed nanowires with diameters ranging from 20 to 70 nm; the average diameter was 37 nm and the nanowire lengths were up to several micrometers. - Highlights: • Hexagonal alumina nanowires are grown at 1050 °C through the VLS process. • Alumina nanowires are obtained by the decomposition of decagonal quasicrystalline phase. • The decagonal phase decomposition follows a peritectic reaction at 1030 °C. • Nanoparticles are obtained by hydrogen embrittlement mechanism. • The nanoparticles catalyze the water decomposition to form wires.

36 MATERIALS SCIENCE↗

Mechanism of Ball Milling Effect on Carbothermic Reduction of Industrial Magnesia by Coke

Mechanical milling always improves the chemical reaction rate in the metallurgy process. The experiment proved that ball milling treatment on raw materials, including industrial magnesia, metallurgical coke, and fluoride calcium, could increase greatly the reaction rate of magnesia. The reaction samples and residues were analyzed by particle size measurement, X-ray diffraction (XRD) analysis, Raman spectroscopy analysis, scanning electron microscope (SEM), and transmission electron microscope (TEM). The results suggested that the positive effect of ball milling on the reaction rate came from three aspects. Ball milling could decrease magnesia particle size and peel coke into graphite sheets to enlarge their contact surface. Meanwhile, ball milling could slightly destroy the crystal grain surface of magnesia and decrease the crystallization of graphite. The nanometer-scale magnesia particles and graphite sheets would stably and strongly attract together after a longer time ball milling. The possible evolution of the particles during ball milling was given, which explained the mechanism of the ball milling effect on the carbothermic reduction of industrial magnesia by coke.

36 MATERIALS SCIENCE↗

High magnetic field induced spin flip/flop behavior and magnetic phase diagram of CuFe{sub 1−x}Ga{sub x}O{sub 2}

The structure and magnetic properties of non-magnetic Ga{sup 3+} ion doped CuFe{sub 1−x}Ga{sub x}O{sub 2} (x=0, 0.03, and 0.05) single crystal samples were investigated. X-ray diffraction patterns analysis confirms that the samples are single-phase crystallizing. Doping effect on the magnetic behavior of the ground state and the field-induced spin flip/flop transitions were detected. The transition temperatures and critical magnetic fields of the spin flip/flop, as well as the magnetic hysteresis directly depend on the Ga{sup 3+} doping level. Such doping effects may associate with the competition between dilution effect (partial release of spin frustration) and the induced local magnetic moment, which is the result of the changed magnetic coupling both inter- and intra-planes of Fe ions. Based on the experimental results, the effects of Ga{sup 3+} doping on the spin flip/flop behavior and a detailed high field magnetic diagram were assumed. - Graphical abstract: Temperature dependence of the critical fields for CuFe{sub 1−x}Ga{sub x}O{sub 2} (x=0, 0.03, 0.05). (a) and (b) The magnetic field's parallel and perpendicular cases respectively. In which, the square, circle and triangular represent x=0, 0.03 and 0.05 respectively. - Highlights: • Single crystal samples of CuFe{sub 1−x}Ga{sub x}O{sub 2} (x=0, 0.03 and 0.05) were grown. • Magnetic field dependence of magnetization was measured in pulsed high magnetic field up to 54 T with different temperatures. • The magnetic field induced multi-step-like transitions were observed in all the single crystal samples. • A detailed magnetic diagram was assumed based on the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure, texture evolution and magnetic properties of strip-casting non-oriented 6.5 wt.% Si electrical steel doped with cerium

A 0.3 mm thick non-oriented 6.5 wt.% Si electrical steel sheet doped with cerium is produced by twin-roll strip casting, hot rolling, warm rolling and annealing. A detailed study of the cerium precipitates in the as-cast strip, microstructure and texture evolution at different processing stages is carried out by electron probe micro-analysis, optical microscopy, X-ray diffraction and electron backscattered diffraction analysis. Grain interior distributing precipitates identified as Ce-oxides, Ce-oxysulfides and Ce-phosphides, and boundary distributing Ce-oxides and Ce-phosphides are observed in the as-cast strip. The initial as-cast strip is characterized by a much finer solidification microstructure and dominated by obvious < 001 >//ND texture through the strip thickness. After hot and warm rolling, inhomogeneous microstructure containing large amounts of in-grain shear bands is characterized by mixed < 110 >//RD and < 111 >//ND textures. The texture of the annealed sheet with a relatively large average grain size is far more optimized by the domination of the beneficial cube, rotated cube, (001)< 120 > to (001)< 130 > and Goss texture components, and the elimination of the detrimental γ-fiber texture, leading to a superior magnetic induction and improved iron loss. - Highlights: • An Fe–6.5 wt.% Si as-cast strip doped with cerium was produced. • A thin warm rolled sheet with limited edge cracks was obtained. • Microstructure and texture evolution at each stage were investigated. • Strong λ-fiber and Goss recrystallization textures were formed. • The magnetic properties of the annealed sheet were significantly improved.

36 MATERIALS SCIENCE↗

Spectroscopic and dielectric response of zinc bismuth phosphate glasses as a function of chromium content

Graphical abstract: 20ZnF{sub 2}–(20 − x)Bi{sub 2}O{sub 3}–60P{sub 2}O{sub 5}:xCr{sub 2}O{sub 3} (0 ≤ x ≤2 mol%) glasses are prepared by melt quenching technique. The optical absorption spectra of present glasses are analyzed as a function of chromium content. The absorption bands are assigned to {sup 4}A{sub 2g}(F) ⟶ {sup 4}T{sub 1g}(F), {sup 4}A{sub 2g}(F) ⟶ {sup 4}T{sub 2g}(F), {sup 4}A{sub 2g}(F) ⟶ {sup 2}T{sub 1g}(G) and {sup 4}A{sub 2g}(F) ⟶ {sup 2}E{sub g}(G) transitions of Cr{sup 3+} ions. - Highlights: • ZnF{sub 2}–Bi{sub 2}O{sub 3}–P{sub 2}O{sub 5}:Cr{sub 2}O{sub 3} glasses were prepared by melt quenching and annealing. • Spectroscopic and dielectric properties of chromium ions were investigated. • ESR and optical absorption spectra indicate the co-existence of Cr{sup 6+} ions with Cr{sup 5+} ions and Cr{sup 3+} ions. • Cr{sup 3+} ions act as modifiers and influence the semiconducting nature of the glass system. - Abstract: 20ZnF{sub 2}–(20 − x)Bi{sub 2}O{sub 3}–60P{sub 2}O{sub 5}:xCr{sub 2}O{sub 3} (0 ≤ x ≤2 mol%) glasses are prepared by melt quenching technique. Amorphous nature of these samples is confirmed by X-ray diffraction (XRD) analysis. FTIR study reveals bands due to CrO{sub 6}(o{sub d}) and CrO{sub 4}{sup 2−}(T{sub d}) units along with conventional phosphate groups. The optical absorption and ESR studies of present glasses are analyzed as a function of chromium content. The absorption bands are assigned to {sup 4}A{sub 2g}(F) ⟶ {sup 4}T{sub 1g}(F), {sup 4}A{sub 2g}(F) ⟶ {sup 4}T{sub 2g}(F), {sup 4}A{sub 2g}(F) ⟶ {sup 2}T{sub 1g}(G) and {sup 4}A{sub 2g}(F) ⟶ {sup 2}E{sub g}(G) transitions of Cr{sup 3+} ions. The highest concentration of Cr{sup 3+} ions (in octahedral sites, with network modifying positions) is found in the sample with 2.0 mol% of Cr{sub 2}O{sub 3}. The analysis of dielectric properties indicates a gradual increase in semiconducting character with increase in the concentration of Cr{sub 2}O{sub 3} from 0.2 to 2.0 mol%. The studies on dielectric breakdown strength identify the highest insulating strength for lowest mol% of Cr{sub 2}O{sub 3} in the present samples.

36 MATERIALS SCIENCE↗