Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Morphological stability of oxygen- and nitrogen-covered Ru(112¯1)

Morphological stability of the atomically rough Ru(112¯1) surface upon annealing in NO 2 , O 2 , and NH 3 at elevated temperatures has been studied using scanning tunneling microscopy (STM), low energy electron diffraction (LEED), and Auger electron spectroscopy. The surface becomes fully faceted and covered by oxygen after annealing at T ≥ 600 K in NO 2 (10 –8 Torr) or O 2 (10 –6 Torr). The LEED and STM studies reveal that the faceted surface consists of nanoscale ridges, exposing four facets (101¯1), (011¯1), (101¯0), and (011¯0) on the ridges, and the ridge size grows as the annealing temperature increases. Details of the facet structures and reconstructions have been observed. However, no evidence is found for faceting of Ru(112¯1) to occur upon annealing in NH 3 . As a result, our findings should be important for development of Ru-based catalysts under oxygen-rich conditions.

36 MATERIALS SCIENCE↗

High tunability of the work function of (001) surface of ReO{sub 3} with O-vacancies: First principles analysis

Physical and chemical properties of transition metal oxides are central to the emerging field of oxide electronics. However, they are greatly influenced by defects, particularly, oxygen vacancies, which are always present in oxides. Here, we show how the control of oxygen vacancies at (001) surface of ReO{sub 3} can be used to tune its work function from 7 to 3 eV, based on first-principles density functional theoretical calculations of its structure, electronic and magnetic properties. The work function is shown to correlate directly with the stability of surface and exhibit a linear dependence on surface energy. We further assess the stability of ReO{sub 3} surface by determining its phonon dispersion, and explain how the surface stresses effectively strengthen structural instability leading to size dependence of its pressure dependent structural phase transitions observed experimentally. Our results highlight how significantly oxygen vacancies alter the work function of a metallic oxide and has important consequences to development of electronic devices and catalysts based on oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single Atomic Iron Site Catalysts via Benign Aqueous Synthesis for Durability Improvement in Proton Exchange Membrane Fuel Cells

Atomically-dispersed iron-nitrogen-carbon (Fe–N–C) catalysts have arisen as promising candidates for replacing the costly precious metal catalysts in fuel cells but still face some grand challenges, such as insufficient site density and durability. Herein, we report a self-assembly method in an aqueous solution to develop an atomically-dispersed iron catalyst with high oxygen reduction reaction (ORR) activity and stability in acidic electrolytes. As determined by high-resolution transmission electron microscopy (HR-TEM), X-ray absorption spectroscopy (XAS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), this benign aqueous synthesis strategy facilitates the formation of homogeneous atomic nitrogen-coordinated iron sites embedded in a popcorn-like porous graphitic carbon matrix. These catalyst properties contribute to the improved ORR kinetic current density and mass transport. By controlling synthesis chemistry, the correlation between structure and property is systematically investigated. In this work, the iron content is the most critical material property and can regulate site density and graphitic carbon structures in the catalyst, impacting catalytic activity and stability. The enhanced performance and durability were examined in both acidic aqueous electrolytes and membrane electrode assemblies.

25 ENERGY STORAGE↗

Hydrogenation of Clean Carbon Monoxide (CO) and Carbon Dioxide (CO 2 ) Gas Streams to Higher Molecular Weight Alcohols

Higher alcohols including ethanol, propanols, and butanols can be used as gasoline blending stocks. These alcohols not only extend fuel supplies, but can be used as gasoline oxygenates and used to enhance gasoline octane rating. The direct synthesis of higher alcohols from synthesis gas (CO, H 2 ) is thus highly desired. In this work we developed novel alkali metal promoted catalysts for the conversion of synthesis gas to mixed alcohols

10 SYNTHETIC FUELS↗

Active sites engineering of metal-organic frameworks for heterogeneous catalysis

In conclusion, we have for the first time developed a novel solid base catalyst, Ndoped MOF-253 derived porous carbons (Cz-MOF-253). Cz-MOF-253 is highly porous and exhibit high efficiency in Knoevenagel condensation reaction. Furthermore, Cz-MOF-253 is robust and can be reused up to five times. In comparison, the analogous nitrogen-free catalyst-Cz-DUT-5, and other nitrogen- MOFs derived carbon showed an inferior performance. Moreover, the high basicity and porous nature enable the design of bifunctional catalyst and facilitate tandem condensation-hydrogenation reactions. This work delineates the first attempt that demonstrates MOF-derived carbons as solid base catalyst and its potential application in tandem catalysis. Future work on exploring new catalytic reactions based on such porous Lewis basic MOF-derived carbons is currently underway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of continuous Pt-monolayer deposition method on stable non-noble metals and other stable materials (Final Report)

The objective of the project is for BNL to investigate the method of depositing continuous Pt monolayer on non-noble metals and other stable materials under PEM fuel cell operating condition. The motivation of this research is to develop a novel Pt monolayer catalyst for O 2 reduction reaction. This leads to ultra-low Pt loading (<0.1 mg/cm 2 ) for PEM fuel cell catalyst. The deposited Pt-monolayer will be tested to determine their activity and stability under potential cycling conditions. Project involves exploring approaches to increase the catalyst's activity and stability against oxidation under fuel cell operating conditions.

99 GENERAL AND MISCELLANEOUS↗

Demonstration of Micro-Combined Heat and Power for Light Commercial Applications (Final Report)

In 2014 the United States Department of Energy (DOE) Building Technologies Office (BTO) funded a technology assessment of micro Combined Heat and Power (µCHP) systems for light commercial applications. The technology assessment was part of the BTO High Impact Technology (HIT) Catalyst program. The HIT Catalyst program supports research and development into technologies that will yield cost-effective, efficient buildings. It is estimated µCHP in US has the potential to save 10.5 GW of primary energy in the commercial building sector.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Preliminary results from screening tests of commercial catalysts with potential use in gas turbine combustors. Part 2: Combustion test rig evaluation

Several commercial monolithic catalysts were tested in a combustion test rig to determine their suitability for use in a gas turbine combuster primary zone. The catalyst test bed consisted of two to four elements of 12-centimeter diameter by 2.5-centimeter long monolith. Results are presented of the measured combustion efficiency and catalyst bed temperature history for an inlet propane-air mixture temperature of 800 K, a pressure of 300,000 newtons per square meter, inlet velocities of 10 to 25 meters per second and equivalence ratios of 0.1 to 0.3. The best catalysts tested gave combustion efficiencies of virtually 100 percent for reaction temperatures ranging from 1,325 K at 10 meters per second to 1,400 K at 25 meters per second. This performance was only possible with fresh catalysts. The catalysts tested were not specifically developed for use at these conditions and showed some loss in activity after about 3 hours' testing.

Anderson, D. N.↗

Preliminary results from screening tests of commercial catalysts with potential use in gas turbine combustors. II - Combustion test rig evaluation

Several commercial monolithic catalysts were tested in a combustion test rig to determine their suitability for use in a gas-turbine combustor primary zone. The catalyst test bed consisted of two to four elements of 12-centimeter diameter by 2.5-centimeter long monolith. Results are presented of the measured combustion efficiency and catalyst bed temperature history for an inlet propane-air mixture temperature of 800 K, a pressure of 300,000 newtons per square meter, inlet velocities of 10 to 25 meters per second and equivalence ratios of 0.1 to 0.3. The best catalysts tested gave combustion efficiencies of virtually 100% for reaction temperatures ranging from 1325 K at 10 meters per second to 1400 K at 25 meters per second. This performance was only possible with fresh catalysts. The catalysts tested were not specifically developed for use at these conditions and showed some loss in activity after about 3 hours' testing.

Anderson, D. N.↗

Corrosion testing of candidates for the alkaline fuel cell cathode

Current/voltage data was obtained for specially made corrosion electrodes of some oxides and of gold materials for the purpose of developing a screening test of catalysts and supports for use at the cathode of the alkaline fuel cell. The data consists of measurements of current at fixed potentials and cyclic voltammograms. These data will have to be correlated with longtime performance data in order to fully evaluate this approach to corrosion screening. Corrosion test screening of candidates for the oxygen reduction electrode of the alkaline fuel cell was applied to two substances, the pyrochlore Pb2Ru2O6.5 and the spinel NiCo2O4. The substrate gold screen and a sample of the IFC Orbiter Pt-Au performance electrode were included as blanks. The pyrochlore data indicate relative stability, although nothing yet can be said about long term stability. The spinel was plainly unstable. For this type of testing to be validated, comparisons will have to be made with long term performance tests.

Singer, Joseph↗

Corrosion testing of candidates for the alkaline fuel cell cathode

Current/voltage data have been obtained for specially made corrosion electrodes of some oxides and of gold materials for the purpose of developing a screening test of catalysts and supports for use at the cathode of the alkaline fuel cell. The data consist of measurements of current at fixed potentials and cyclic voltammograms. These data will have to be correlated with longtime performance data in order to evaluate fully this approach to corrosion screening.

Singer, Joseph↗

Shapes, Sizes, and Faceting of Nanoscale Metal Particles for Applications in Catalysis

In an effort to reduce the world's dependence on fossil fuels, proton exchange membrane fuel cells (PEMFC) are commonly considered as a prime candidate for alternative energy sources. The efficiency of fuel cells is limited by the oxygen reduction reaction (ORR) which is driven by platinum based catalysts. Numerous methods have been developed to synthesize particles which contain more active surfaces by tuning shapes, sizes and facets. Here, we will present a study of a well known wet chemical reduction method targeting specific morphologies and the resulting electrochemical activity. Studying the relationship between Pt facets at the bulk phase single crystal level versus the nanoscale correlates the effects of faceting on activities. Studying the formation of crystals during the course of the synthesis via transmission electron microscopy (TEM) and small angle x-ray scattering (SAXS) provides mechanistic insight on growth, while electrochemical studies correlate physical properties to performance.

30 DIRECT ENERGY CONVERSION↗

R&D with NREL's 2'' Fluidized Bed Reactor (2FBR) Systems; R&D with the NREL Research Gasifier (NRG)

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the 2 Inch Fluidized Bed Reactor, a versatile lab-scale thermal processing and catalytic upgrading system to evaluate the conversion of renewable and waste feedstocks into fuels and chemicals. In addition, the NREL Research Gasifier is a lab-scale gasification system, perfectly suited to study the conversion of biomass and waste streams to purified syngas. This fact sheet summarizes the capabilities of both systems.

09 BIOMASS FUELS↗

R&D with NREL's Thermal and Catalytic Process Development Unit (TCPDU)

The Thermal and Catalytic Process Development Unit (TCPDU) at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. The TCPDU is NREL's largest thermochemical reactor system, evaluating up to a half ton of biomass per day for thermal deconstruction and catalytic conversion processes. This fact sheet summarizes the capabilities of this reactor system.

09 BIOMASS FUELS↗

R&D With NREL's Fuel Synthesis Catalysis Laboratory (FSCL)

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the Fuel Synthesis Catalysis Laboratory, a purpose-built facility designed for evaluating the performance of heterogeneous catalysts in converting biomass intermediates and waste streams into chemicals and fuels. This fact sheet summarizes the capabilities of this laboratory.

09 BIOMASS FUELS↗

NREL's Capabilities in Bio-Oil Characterization

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to provide reliable analyses for biomass-derived liquids produced from thermochemical conversion, such as pyrolysis bio-oils. This fact sheet summarizes the standardized analytical methods that provide chemical information on bio-oil samples.

09 BIOMASS FUELS↗

NREL's Capabilities in Techno-Economic and Sustainability Analyses for Thermal and Catalytic Conversion of Biomass and Waste Feedstocks

The Thermal and Catalytic Process Development Unit at NREL has state-of-the-art equipment for thermochemical process development and testing, ranging from catalyst and feedstock characterizations to bench-scale reactors to pilot plants. Within this facility is the capability to integrate experimental results with detailed process models to estimate biomass conversion costs. This fact sheet summarizes the core capabilities and applications.

09 BIOMASS FUELS↗