Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Graded Buffer Bragg Reflectors with High Reflectivity and Transparency for Metamorphic Optoelectronics

A graded buffer Bragg reflector (GBBR) is a bifunctional device component that provides the reflection of a distributed Bragg reflector and the adjustable lattice constant of a compositionally graded buffer. Prior work showed that these properties can be combined with low threading dislocation density and high reflectivity. Here, we design and demonstrate complex GBBRs for specific metamorphic solar cell applications. We design buffers that provide (1) high reflectivity over a narrow bandwidth, for quantum well solar cells, (2) reflectivity over a wide bandwidth, for optically thin solar cells, and (3) low sidelobe reflection, for multijunction devices that demand low out-of-band reflection. Apodized and triple GBBRs are demonstrated, and transparency is always considered, requiring designs with carefully engineered material combinations. A GBBR with a reflection of 99% is demonstrated, as well as a triple GBBR that has over 80% reflection for 100?nm of the spectrum around 800?nm. We also analyze potential deviations in a baseline GBBR from that of a perfect DBR using transmission electron microscopy to analyze imperfections in the material and modeling to analyze the impact of imperfect refractive index data for lattice-mismatched AlGaInAs. Minimal crosshatch roughness and unintentional thickness variation occur throughout the buffer, which likely influences reflection slightly. Small deviations between the calculated AlGaInAs and utilized AlGaAs refractive index exist, giving methods for future GBBR improvement. While the GBBR designs are intended for metamorphic solar cells, the broad and high reflection may also be useful for other optoelectronic devices such as light-emitting diodes or lasers.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2024

Tailoring Molecular Space to Navigate Phase Complexity in Cs-Based Quasi-2D Perovskites via Gated-Gaussian-Driven High-Throughput Discovery

Cesium-based quasi-2D halide perovskites (HPs) offer promising functionalities and low-temperature manufacturability, suited to stable tandem photovoltaics. However, the chemical interplays between the molecular spacers and the inorganic building blocks during crystallization cause substantial phase complexities in the resulting matrices. To successfully optimize and implement the quasi-2D HP functionalities, a systematic understanding of spacer chemistry, along with the seamless navigation of the inherently discrete molecular space, is necessary. Herein, by utilizing high-throughput automated experimentation, the phase complexities in the molecular space of quasi-2D HPs are explored, thus identifying the chemical roles of the spacer cations on the synthesis and functionalities of the complex materials. Furthermore, a novel active machine learning algorithm leveraging a two-stage decision-making process, called gated Gaussian process Bayesian optimization is introduced, to navigate the discrete ternary chemical space defined with two distinctive spacer molecules. Through simultaneous optimization of photoluminescence intensity and stability that “tailors” the chemistry in the molecular space, a ternary-compositional quasi-2D HP film realizing excellent optoelectronic functionalities is demonstrated. Finally, this work not only provides a pathway for the rational and bespoke design of complex HP materials but also sets the stage for accelerated materials discovery in other multifunctional systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Endowing low fatigue for elastocaloric effect by refined hierarchical microcomposite in additive manufactured NiTiCuCo alloy

Abstract NiTiCu-based shape memory alloys have been considered as ideal materials for solid-state refrigeration due to their superb cycling stability for elastocaloric effect. However, the embrittlement and deterioration caused by secondary phase and coarse grains restrict their applications, and it is still challenging since the geometric components are required. Here, bulk NiTiCuCo parts with excellent forming quality were fabricated by laser powder bed fusion (LPBF) technique. The as-fabricated alloy exhibits refined three-phases hierarchical microcomposite formed based on the rapid cooling mode of LPBF, composed of intricate dendritic Ti 2 Ni–NiTi composite and nano Ti 2 Cu embedded inside the NiTi-matrix. This configuration endows far superior elastocaloric stability compared to the as-cast counterpart. The low fatigue stems from the strong elastic coupling between the interphases with reversible martensite transformation, revealed byin-situsynchrotron high-energy x-ray diffraction. The fabrication of NiTiCuCo alloy via LPBF fills the bill of complex geometric structures for elastocaloric NiTiCu alloys. The understanding of interphase micro-coupling could provide the guide for designing LPBF fabricated shape memory-based composites, enabling their applications for special demands on other functionalities.

Engineering↗
DOE OSTI2020

A Systems Biology Approach to Energy Flow in H 2 Producing Microbial Communities: Microbial Mats

This report describes the results of work conducted at NASA Ames Research Center, in collaboration with investigators at Lawrence Livermore National Laboratory, during the time period 12/15/2014 to 12/15/2017. The work was an extension of a collaboration with LLNL that began in 2008. Work this reporting period focused primarily on tasks related to microbial mats from both the Elkhorn Slough and Baja California field sites, including the analysis and publication of data produced prior to 12/15/2014. During this reporting period, in addition to the microbial mat work, we also conducted a series of experiments with a particular algal-bacterial association (C. sorokiniana and A. brasilense). A number of aspects of this well-characterized algal-bacterial association enabled us not only to further our understanding of interactions between these particular organisms, but to apply that knowledge and techniques to our collection of microorganisms isolated from microbial mats. Microbial mat experiments focused both on intact mat communities and on cultures of organisms isolated from the mats (the Microbial Mat Living Library). In a series of co-culture experiments, we documented both positive and negative interactions amongst heterotrophic and autotrophic isolates of microbial mat microorganisms. One particularly important and novel mat cyanobacterium (ESFC-1) was studied in detail. We developed techniques to pursue an investigation of functional redundancy (the idea that closely related organisms perform identical roles in a community) in cyanobacterial autotrophs in the Elkhorn Slough microbial mat. In those experiments, we documented numerous instances of increases in growth rate between co-cultures of two organisms (relative to their growth rate in isolation) performing what would seem to be identical functional roles. Simplified microbial mat communities consisting of organisms from the Microbial Mat Living Library were constructed and studied in laboratory experiments. The “constructed mats” were grown in standard laboratory glassware and plasticware, but cultures were also combined with artificial materials in an effort to re-create the three-dimensional structure of naturally occurring microbial mats. These constructed mats re-created a number of functions attributable to natural microbial mats (N-fixation, H2-production) and simplified their study using molecular ecological techniques due to the smaller number of microbial “species” present. Cyanobacteria which migrated in response to vertical variations in light intensity (irradiance) obtained characteristic positions in constructed mats that were similar to their positions in natural mats. A detailed investigation of nitrogen cycling in both the Baja California and Elkhorn Slough microbial mats was initiated during this reporting period. The nitrogen cycle in the microbial mats has not been studied in depth, despite the fact that nitrogen usually limits growth in marine environments. The organisms conducting nitrogen cycling in both microbial mats were studied using the genomes available from earlier work on these mats, as well as with a targeted approach using molecular ecological methods developed here. Quantitative measurements of rates of nitrogen transformations were made using stable isotopically labeled nitrogen. The processes quantified and examined using molecular ecological methods included: nitrogen fixation, ammonification, ammonium and nitrate assimilation, denitrification, anaerobic oxidation of ammonium, and dissimilatory nitrate reduction to ammonium. In a series of experiments designed to examine a potential application for microbial mats, we demonstrated that both Elkhorn Slough and Baja California microbial mats were very effective in removing large quantities of both nitrate and ammonium from waste streams containing these compounds at levels where they would be considered to be pollutants. Considerable effort was expended during this reporting period to analyze, and prepare for publication, metagenomes and metatranscriptomes collected from two experimental manipulations of microbial mats. The first, a diel study, was conducted in November 2011, while the second, an investigation of the effects of sulfate on community composition, was conducted during this reporting period. For the earlier study, reference-based and reference-free methods were used to assess microbial ecology and genetic partitioning in these complex microbial systems, and that work is available as a pre-print. Four metagenomes from the same experiment were published. In the second, longer (nearly 200 day) manipulation, rRNA iTag libraries for cDNA and DNA were analyzed to determine the effects of sulfate concentration on microbial mat community composition over the course of the experiment. Work on the algal-bacterial association (Chlorella sorokiniana and Azospirillum brasilense) focused initially on demonstrating the transfer of carbon and nitrogen between the partners, using stable isotopic labeling and the LLNL NanoSIMS. Subsequently, the potential role of diazotrophy (nitrogen fixation) by the bacterial partner in supporting the growth of the association was assessed in a series of experiments. It appears to be the case that, although the bacterial partner demonstrably increases the fitness of the algae under nitrogen limitation, and cells of C. sorokiniana receive nitrogen originally fixed from atmospheric nitrogen by A. brasilense, the amount of nitrogen obtained by diazotrophy is too small to explain the increase in fitness.

08 HYDROGEN↗
DOE OSTI2024

Alteration of phycobilisome excitation energy transfer properties in response to attenuations in peripheral electron flow

In Synechocystis sp. PCC 6803 ( S . 6803), two types of phycobilisome (PBS) complexes, CpcG-PBS and CpcL-PBS, function to harvest light energy for photosynthetic reaction centers (RCs), photosystem I (PSI) and photosystem II (PSII). The compositional differences between these two forms of PBS and their specificity for RCs have led to suggestions that they may differ in function. To address this question, we examined how PBS-RC interactions, and the transfer of excitation energy from PBS to RCs, might be adjusted under conditions where electron demand and photon availability are modulated. The CpcG-PBS, CpcL-PBS, and RC complexes were isolated from a S . 6803 strain defective in expression of flavodiiron 1 (oxygen reduction reaction 1, ORR1) grown under varied light regimes. The energy transfer preference from CpcL-PBS to either PSI or PSII was investigated by in vitro crosslinking and 77 K fluorescence emission spectroscopy to assess energy transfer efficiency under photoexcitation. While the results demonstrate that the transfer of excitation energy from CpcL-PBS favors PSI over PSII in WT strains as previously shown, the preference of CpcL-PBS switches from PSI to PSII in ORR1 strains. Surprisingly, this change in preference was reproduced when ORR1 CpcL-PBS was crosslinked with WT RCs, or when WT CpcL-PBS was cross-crosslinked with ORR1 RCs, indicating there are physical modifications to both PBS and RCs that mediate the preference switch. In contrast, the analysis with ORR1 CpcG-PBS shows similar preferences to WT. Additionally, PBS populations in ORR1 shifted to a greater proportion of CpcL-PBS relative to CpcG-PBS. These results demonstrate that under conditions where electron utilization changes, there is a tuning of the excitation energy allocation from CpcL-PBS to RCs to manage the energy distribution for photosynthesis under dynamic flux conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

In Situ Scattering Studies of Crystallization Kinetics in a Phase-Separated Zr–Cu–Fe–Al Bulk Metallic Glass

In this work, thermal stability and the crystallization kinetics of a phase-separated Zr-Cu-Fe-Al bulk metallic glass were investigated using in situ high-energy synchrotron X-ray and neutron diffraction, as well as small-angle synchrotron X-ray scattering. It was revealed that this glass with excellent glass-forming ability possesses a two-step crystallization behavior. The crystalline products and their evolution sequence are more complicated than a homogeneous Zr-Cu-Al glass with average glass-forming ability. The experimental results indicate that a finely distributed nanometer-sized cubic Zr 2 Cu phase forms first and then transforms to a tetragonal Zr 2 Cu phase, while the matrix transforms to an orthorhombic Zr3Fe phase. The strength of the Zr-Cu-Fe-Al composite containing cubic Zr 2 Cu phase and glass matrix increases, and the plasticity also improves compared to the as-cast Zr-Cu-Fe-Al bulk metallic glass. Our results suggest that the formation of multiple and complex crystalline products would be the characteristics of the Zr-Cu-Fe-Al glass with better glass-forming ability. Our study may shed light on the synthesis of bulk-sized glass-nanocrystals composites of high strength and good plasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Phase Behavior of Mixtures of Block Copolymers and a Lithium Salt

We present experimental results on the phase behavior of block copolymer/salt mixtures over a wide range of copolymer compositions, molecular weights, and salt concentrations. The experimental system comprises polystyrene-block-poly(ethylene oxide) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. It is well established that LiTFSI interacts favorably with poly(ethylene oxide) relative to polystyrene. The relationship between chain length and copolymer composition at fixed temperature is U-shaped, as seen in experiments on conventional block copolymers and as anticipated from the standard self-consistent field theory (SCFT) of block copolymer melts. The phase behavior can be explained in terms of an effective Flory-Huggins interaction parameter between the polystyrene monomers and poly(ethylene oxide) monomers complexed with the salt, χ eff , which increases linearly with salt concentration. The phase behavior of salt-containing block copolymers, plotted on a segregation strength versus copolymer composition plot, is similar to that of conventional (uncharged) block copolymer melts, when the parameter χ eff replaces χ in segregation strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Morphology and property tuning in ZnO–Ni hybrid metamaterials in vertically aligned nanocomposite (VAN) form

ZnO thin films have attracted significant interest in the past decades owing to their unique wide band gap properties, piezoelectric properties, non-linearity and plasmonic properties. Recent efforts have been made in coupling ZnO with secondary phases to enhance its functionalities, such as Au–ZnO nanocomposite thin films with tunable optical and plasmonic properties. In this work, magnetic nanostructures of Ni are incorporated in ZnO thin films in a vertically aligned nanocomposite (VAN) form to couple magnetic and plasmonic response in a complex hybrid metamaterial system. Nickel (Ni) is of interest due to its ferromagnetic and plasmonic properties along with gold (Au) which is also plasmonic. Therefore, two approaches, namely, tuning of the deposition pressure and use of a ZnO–Au seeding layer have been attempted to achieve unique Ni nanostructures in addition to tuning of the microstructure. Together, both approaches demonstrate a range of microstructures such as core–shell, nanodisk, nanocup, and nanocube-like morphologies not previously attempted. Additionally, there is effective tuning of properties. Specifically, the seeding layer thickness causes hyperbolic behavior as well as redshift in the surface plasmon resonance (SPR) wavelength. The addition of the ZnO–Au seeding layer directly influences the optical properties. Plus, regardless of the different approaches, the films demonstrate magnetic anisotropy based on the composition and microstructure of the film which impacted the saturation magnetization and coercivity. This study demonstrates the potential of ZnO-based complex hybrid metamaterials with coupled electro-magneto-optical properties for integrated photonic devices.

Bhatt, Nirali A. [Purdue Univ., West Lafayette, IN↗
DOE OSTI2022

A machine learning approach to predict thermal expansion of complex oxides

Although it is of scientific and practical importance, the state-of-the-art of predicting the thermal expansion of oxides over broad temperature and composition ranges by physics-based atomistic simulations is currently limited to qualitative agreements. We present an emerging machine learning (ML) approach to accurately predict the thermal expansion of cubic oxides with a dataset consisting of experimentally measured lattice parameters while using the metal cation polyhedron and temperature as descriptors. High-fidelity ML models that can accurately predict temperature- and composition-dependent lattice parameters of cubic oxides with isotropic thermal expansions have been successfully trained. The ML-predicted thermal expansions of oxides not included in the training dataset have shown good agreement with available experiments. The limitations of the current approach and challenges to go beyond cubic oxides with isotropic thermal expansion are also briefly discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2017

A micro-scale cutting model for UD CFRP composites with thermo-mechanical coupling

Cutting a unidirectional carbon fiber-reinforced polymer (UD CFRP) structure is the basic unit for CFRP machining, which is a complex thermal-mechanically coupled process. To reveal the deformation mechanism and predict cutting force in UD CFRP micro cutting, a micro-scale fracture model for UD CFRP cutting with thermal-mechanical coupling is demonstrated in this paper, which captures the failure modes for fibers, matrix and the interface based on a micro-level RVE using a relatively simple damage based fracture method. The thermal-mechanical coupling model at the micro scale is developed on the basis of the plastic energy dissipation and frictional heating during cutting. Failure models for the fiber, matrix and interface region are applied depending on the material properties of each of these three phases. Numerical simulations based on the above model with different fiber orientations were performed to predict the deformation and forces of different components in UD CFRP. Cutting experiments with the same fiber orientations as considered in the simulations were carried out to validate the force and deformation results. The predicted force and deformation patterns match well with evidence from our experiments. In general, the cutting force is larger than the thrust force regardless of fiber orientation. The cutting force reaches a maximum as the fiber orientation approaches 90 , but thrust forces do not vary substantially across cases. When the fiber orientation is acute, the deformation of fibers is much smaller than when the cutting angle is obtuse. Surface roughness follows the same trend with cutting angle as fiber deformation.

42 ENGINEERING↗
DOE OSTI2019

Coupling biology to synthetic nanomaterials for semi-artificial photosynthesis

Biohybrid artificial photosynthesis intends to combine the advantages of biological specificity with a range of synthetic nanomaterials to create innovative semi-synthetic systems for solar-to-chemical conversion. Biological systems utilize highly efficient molecular catalysts for reduction-oxidation reactions. They can operate with minimal overpotentials while selectively channeling reductant energy into specific transformation chemistries and product forming pathways. Nanomaterials can be synthesized to have efficient light-absorption capacity and tuneability of charge separation by manipulation of surface chemistries and bulk compositions. These complementary aspects have been combined in a variety of ways, for example, where biological light-harvesting complexes function as antenna for nanoparticle catalysts or where nanoparticles function as light capture, charge separation components for coupling to chemical conversion by redox enzymes and whole cells. The synthetic diversity that is possible with biohybrids is still being explored. The progress emerging from creative approaches is generating new model systems to inspire scale-up technologies and generate understanding of the fundamental mechanisms that control energy conversion at the molecular scale. These attempts are leading to discoveries of essential design principles that can enable the development of scalable artificial photosynthesis systems.

09 BIOMASS FUELS↗
DOE OSTI2025

Myna: Connecting powder bed fusion build data to simulation tools for digital twin applications

Additive manufacturing (AM), as a digital process, can generate a detailed digital thread linking a part’s design and manufacturing to its operational performance. As AM systems advance, an increasing amount of process data is stored in manufacturing databases. In principle, this data can be utilized by simulation-based digital twin approaches, such as real-time process control and asynchronous post-processing guidance. However, few tools currently exist for systematically integrating digital thread data with computational tools. Here, in this study, we propose a software package, called Myna, for connecting data from powder bed fusion processes to simulation tools. The utility of such a platform is demonstrated using build data from the Oak Ridge National Laboratory Manufacturing Demonstration Facility “Peregrine v2023-10” public dataset to automatically configure and run 54 semi-analytical 3DThesis melt pool simulations, 78 numerical Additive FOAM melt pool simulations, and 3 ExaCA microstructure simulations. The simulated, spatially registered microstructures are then compared directly with electron backscatter diffraction characterization of the corresponding as-built part locations. The resulting simulated microstructure showed variation as a function of process parameters, particularly stripe width; however, the experimental data had little variation between the microstructure texture and grain size resulting from different processing conditions. Analysis of the discrepancies suggest that it is possible a two-phase ferritic-austenitic solidification model is needed to accurately predict grain size and texture for certain stainless steel 316L feedstock compositions under powder bed fusion conditions, providing direction for future research. As illustrated here, due to the number and complexity of the simulations involved in AM process-structure–property predictions, automated methods to connect process data and simulations will remain necessary tools for testing hypotheses and implementing digital twin applications.

Knapp, Gerald L. [Oak Ridge National Laboratory (O↗
DOE OSTI2025

Predictive modeling of Néel temperature in austenitic alloys using CALPHAD and data analytics

The Néel temperature is a crucial yet often overlooked parameter in calculating the stacking fault energy (SFE) of austenitic alloys. Several empirical equations have been proposed to estimate the Néel temperature of austenitic alloys, which are then used to calculate the SFE and explain deformation mechanisms. However, these empirical equations, typically derived using linear regression algorithms, are often simplistic and may fail to capture the complex interactions among multiple alloying elements that influence the Néel temperature. Moreover, their applicability is usually limited to specific compositional ranges. In this study, we propose a CALPHAD based approach and develop a surrogate decision tree based regression model capable of capturing the interactions among multiple alloying elements to predict the Néel temperature. Predictions from both the CALPHAD approach and the regression model show close agreement with experimental measurements reported in the literature. In conclusion, the implications of accurate Néel temperature predictions on the calculated SFE and deformation mechanisms are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Surface Reactivity Analysis of the Crude Oil–Brine–Limestone Interface for a Comprehensive Understanding of the Low-Salinity Waterflooding Mechanism

Low-salinity waterflooding (LSWF) has proven to improve oil recovery in carbonate formations through rock wettability alteration, although the underlying mechanism remains elusive. Multivalent ionic exchange and calcite dissolution have usually been investigated using geochemical analysis in secondary coreflooding. In this work, coreflooding, in tertiary mode, coupled with a surface reactivity analysis approach was employed to investigate the interplay of wettability alteration mechanisms such as mineral dissolution, electrostatic bond attraction, and the effect of pH at in situ conditions. Improved oil recovery (IOR) in tertiary mode observed by coreflooding in Indiana limestone rocks showed an ionic strength dependence, that is, reducing brine ionic strength resulted in an increase in oil recovery. Coreflooding results showed that the seawater and low-salinity brines deprived of Mg 2+ ions resulted in the lowest IOR in tertiary mode, indicating the significance of Mg 2+ on IOR in limestone rocks. Similar results were observed through the contact angle measurement showing the limestone rock wettability state dependence on ionic strength and the effect of Mg2+ ions. Surface reactivity analysis showed an increase in solution pH, Ca 2+ and Mg 2+ ions concentration in the effluent solution from the coreflooding in tertiary mode using low salinity brines (about 40 and 20% increase in the effluent composition for Ca 2+ and Mg 2+ , respectively). These changes in solution composition were used to calculate the in situ oil–brine and rock–brine zeta potential using a validated surface complexation model, showing the changes of zeta potential as brine is injected into limestone rocks. The results show that using seawater-like brine in tertiary mode resulted in no mineral dissolution or ionic exchange. However, improved oil recovery (IOR) using such seawater-like brine was due to wettability alteration caused by reduced electrostatic bond attraction associated with Mg 2+ ions [from 2.6 × 10 –13 (mol/m 2 ) 2 for formation water salinity to 1.5 × 10 –13 (mol/m 2 ) 2 for seawater salinity]. Using low-salinity brines in tertiary mode improved oil recovery by mineral dissolution, resulting in oil desorption and an increase in solution pH. Finally, the increase in solution pH also resulted in reduced electrostatic bond attraction which lead to rock wettability alteration using low-salinity brines.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2018

Excitonic Energy Landscape of the Y16F Mutant of the Chlorobium tepidum Fenna–Matthews–Olson (FMO) Complex: High Resolution Spectroscopic and Modeling Studies

We report high-resolution (low-temperature) absorption, emission, and nonresonant/resonant hole-burned (HB) spectra and results of excitonic calculations using a non-Markovian reduced density matrix theory (with an improved algorithm for parameter optimization in heterogeneous samples) obtained for the Y16F mutant of the Fenna–Matthews–Olson (FMO) trimer from the green sulfur bacterium Chlorobium tepidum. We show that the Y16F mutant is a mixture of FMO complexes with three independent low-energy traps (located near 817, 821, and 826 nm), in agreement with measured composite emission and HB spectra. Two of these traps belong to mutated FMO subpopulations characterized by significantly modified low-energy excitonic states. Hamiltonians for the two major subpopulations (Sub 821 and Sub 817 ) provide new insight into extensive changes induced by the single-point mutation in the vicinity of BChl 3 (where tyrosine Y16 was replaced with phenylalanine F16). The average decay time(s) from the higher exciton state(s) in the Y16F mutant depends on frequency and occurs on a picosecond time scale.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Theoretical Insights into Reaction-Induced Transformation and Tuning of Catalytic Behavior in Heterogenous Catalysis

Reaction-induced transformations in heterogenous catalysis represent diverse phenomena that challenge traditional views of static catalyst surfaces. From surface adsorbate dynamics, atomic rearrangements, to composition and phase transitions, these processes reveal the profound differences between idealized model systems under ultrahigh vacuum and the complex, evolving interfaces that govern real catalytic behaviors under reaction conditions. Here, this perspective reviews recent theoretical efforts to provide atomic-level mechanistic insights into significant reaction-induced transformations and their impact on catalytic activity and selectivity. It underscores the need for an integrated framework that combines predictive simulations with operando characterization to uncover active sites and mechanisms under realistic operating conditions. Achieving this requires accelerating existing simulations to fully capture diverse reaction-induced surface dynamics, enabling scalable and accurate modeling of catalysts as condition-dependent, dynamically evolving systems. Such approaches are critical to bridge the gap between theory and practice, offering a pathway to more impactful and predictive catalyst design.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Plant‐Induced Changes Mediate Belowground Carbon Cycling in an Experimentally Warmed Peatland

Warming and elevated atmospheric CO 2 profoundly impact peatland ecosystems, particularly through changes in plant species composition. Plants regulate the initial input of organic compounds to peatland belowground systems, controlling the availability of electron donors and electron acceptors that fuel microbially mediated organic matter decomposition to CO 2 and CH 4 . However, explicit links between porewater CO 2 and CH 4 dynamics and plant-derived chemical compounds remain relatively undefined. In a whole ecosystem warming experiment, we investigated how warming affects plant leaf chemical composition and species assemblages, and how the alteration of leaf-derived organic compounds supplied to the subsurface impacts belowground CO 2 and CH 4 production. While earlier studies at our site found no temperature-dependent changes in CH 4 production pathways, our extended timeseries has revealed increased acetoclastic methanogenesis at higher temperatures in certain peat depths, correlated with elevated porewater phenolics. These changes appear driven by the observed increased plant productivity and altered vegetation inputs, which accelerate decomposition and fuel CH 4 production through enhanced substrate availability. In conclusion, we observed warming-induced changes in molecular composition both between and within plant species, suggesting that plant-mediated controls on belowground carbon processing are more complex than previously recognized.

Wilson, Rachel M. [Florida State Univ., Tallahasse↗