Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Multi-material hydrodynamics with algebraic sharp interface capturing

A finite volume method for Eulerian multi-material hydrodynamics with sharp interface capturing is presented here. The pressure-temperature non-equilibrium multi-material system with finite-rate pressure relaxation in mixed-cells is considered here. This pressure closure facilitates material-property-dependent pressure relaxation, rather than instantaneous pressure equilibration, which in turn allows the use of unsplit high-order time-integrators. A modified tangent of hyperbola for interface capturing (THINC) method is used to reconstruct multi-material (> 2) interfaces, on three-dimensional unstructured meshes. A simple modification which extends the THINC reconstruction to interfaces between more than two materials is proposed. It is demonstrated that the modified THINC can capture multi-material interfaces within 2–4 tetrahedral cells. Since no geometric reconstructions are required by the THINC method, the presented multi-material method is algorithmically simple, and computationally efficient. Consistent reconstructions of conserved quantities at material interfaces ensure that conservation and closure laws are satisfied at the discrete level. Through a suite of test problems solved on unstructured meshes, it is demonstrated that the presented method is a promising candidate for accurate and efficient multi-material hydrodynamics computations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Phase field simulation of martensitic transformation in pre-strained nanocomposite shape memory alloys

We show in this paper how strain engineering alters the fundamental characteristic of a martensitic transformation (MT) and gives it a new set of properties including large quasi-linear elastic strain response with nearly vanishing hysteresis and low elastic modulus. The work is motivated and inspired by a recent experimental study on elastic and inelastic (transformation) strain matching in a pre-strained nano-composite with Nb nanowires embedded in a NiTi shape memory alloy matrix. In particular, we demonstrate by computer simulation that dislocations at Nb/NiTi interfaces produced by the pre-straining are responsible for the unprecedented properties. Microstructural evolution captured in the simulations reveals that local stress fields associated with the dislocations regulate the nucleation and growth of martensite, turning the otherwise sharp, strong first-order transition into a continuous, high-order like transition. The simulations predict that the stress-strain hysteresis and modulus of the composite decrease with increasing amount of pre-strain, which agrees well with the experimental measurement. This study suggests a design strategy by introducing non-uniform stress fields for enhanced properties of shape memory alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Segregation competition and complexion coexistence within a polycrystalline grain boundary network

Interfacial segregation can stabilize grain structures and even lead to grain boundary complexion transitions. However, understanding of the complexity of such phenomena in polycrystalline materials is limited, as most studies focus on bicrystal geometries. In this work, we investigate interfacial segregation and subsequent complexion transitions in polycrystalline Cu-Zr alloys using hybrid Monte Carlo/molecular dynamics simulations. No significant change in the grain size or structure is observed upon Zr dopant addition to a pure Cu polycrystal at moderate temperature, where grain boundary segregation is the dominant behavior. Segregation within the boundary network is inhomogeneous, with some boundaries having local concentrations that are an order of magnitude larger than the global value and others having almost no segregation, and changes to physical parameters such as boundary free volume and energy are found to correlate with dopant concentration. Further, another alloy sample is investigated at a higher temperature to probe the occurrence of widespread transitions in interfacial structure, where a significant fraction of the originally ordered boundaries transition to amorphous complexions, demonstrating the coexistence of multiple complexion types, each with their own distribution of boundary chemical composition. Overall, this work highlights that interfacial segregation and complexion structure can be diverse in a polycrystalline network. Here, the findings shown here complement existing computational and experimental studies of individual interfaces and help pave the way for unraveling the complexity of interfacial structure in realistic microstructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

QRCODE: Massively parallelized real-time time-dependent density functional theory for periodic systems

We present a new software module, QRCODE (Quantum Research for Calculating Optically Driven Excitations), for massively parallelized real-time time-dependent density functional theory (RT-TDDFT) calculations of periodic systems in the open-source Qbox software package. Our approach utilizes a custom implementation of a fast Fourier transformation scheme that significantly reduces inter-node message passing interface (MPI) communication of the major computational kernel and shows impressive scaling up to 16,344 CPU cores. In addition to improving computational performance, QRCODE contains a suite of various time propagators for accurate RT-TDDFT calculations. As benchmark applications of QRCODE, we calculate the current density and optical absorption spectra of hexagonal boron nitride (h-BN) and photo-driven reaction dynamics of the ozone-oxygen reaction. We also calculate the second and higher harmonic generation of monolayer and multi-layer boron nitride structures as examples of large material systems. Our optimized implementation of RT-TDDFT in QRCODE enables large-scale calculations of real-time electron dynamics of chemical and material systems with enhanced computational performance and impressive scaling across several thousand CPU cores.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Meshfree methods on manifolds for hydrodynamic flows on curved surfaces: A Generalized Moving Least-Squares (GMLS) approach

We utilize generalized moving least squares (GMLS) to develop meshfree techniques for discretizing hydrodynamic flow problems on manifolds. We use exterior calculus to formulate incompressible hydrodynamic equations in the Stokesian regime and handle the divergence-free constraints via a generalized vector potential. This provides less coordinate-centric descriptions and enables the development of efficient numerical methods and splitting schemes for the fourth-order governing equations in terms of a system of second-order elliptic operators. Using a Hodge decomposition, we develop methods for manifolds having spherical topology. We show the methods exhibit high-order convergence rates for solving hydrodynamic flows on curved surfaces. The methods also provide general high-order approximations for the metric, curvature, and other geometric quantities of the manifold and associated exterior calculus operators. The approaches also can be utilized to develop high-order solvers for other scalar-valued and vector-valued problems on manifolds.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Optically oriented attachment of nanoscale metal-semiconductor heterostructures in organic solvents via photonic nanosoldering

As devices approach the single-nanoparticle scale, the rational assembly of nanomaterial heterojunctions remains a persistent challenge. While optical traps can manipulate objects in three dimensions, to date, nanoscale materials have been trapped primarily in aqueous solvents or vacuum. Here, we demonstrate the use of optical traps to manipulate, align, and assemble metal-seeded nanowire building blocks in a range of organic solvents. Anisotropic radiation pressure generates an optical torque that orients each nanowire, and subsequent trapping of aligned nanowires enables deterministic fabrication of arbitrarily long heterostructures of periodically repeating bismuth-nanocrystal/germanium-nanowire junctions. Heat transport calculations, back-focal-plane interferometry, and optical images reveal that the bismuth nanocrystal melts during trapping, facilitating tip-to-tail “nanosoldering” of the germanium nanowires. These bismuth-semiconductor interfaces may be useful for quantum computing or thermoelectric applications. In addition, the ability to trap nanostructures in oxygen- and water-free organic media broadly expands the library of materials available for optical manipulation and single-particle spectroscopy.

42 ENGINEERING↗
DOE OSTI2022

Discovery of two-dimensional binary nanoparticle superlattices using global Monte Carlo optimization

Binary nanoparticle (NP) superlattices exhibit distinct collective plasmonic, magnetic, optical, and electronic properties. Here, we computationally demonstrate how fluid-fluid interfaces could be used to self-assemble binary systems of NPs into 2D superlattices when the NP species exhibit different miscibility with the fluids forming the interface. We develop a basin-hopping Monte Carlo (BHMC) algorithm tailored for interface-trapped structures to rapidly determine the ground-state configuration of NPs, allowing us to explore the repertoire of binary NP architectures formed at the interface. By varying the NP size ratio, interparticle interaction strength, and difference in NP miscibility with the two fluids, we demonstrate the assembly of an array of exquisite 2D periodic architectures, including AB-, AB 2 -, and AB 3 -type monolayer superlattices as well as AB-, AB 2 -, A 3 B 5 -, and A 4 B 6 -type bilayer superlattices. Our results suggest that the interfacial assembly approach could be a versatile platform for fabricating 2D colloidal superlattices with tunable structure and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanoscale Turing patterns in a bismuth monolayer

Turing’s reaction–diffusion theory of morphogenesis has been very successful for understanding macroscopic patterns within complex objects ranging from biological systems to sand dunes. However, Turing patterns on microscopic length scales are extremely rare. Here we show that a strained atomic bismuth monolayer assembled on the surface of NbSe 2 —and subject to interatomic interactions and kinetics—displays Turing patterns. Our reaction–diffusion model produces stripe patterns with a period of five atoms (approximately 2 nm) and domain walls with Y-shaped junctions that bear a striking resemblance to what has been experimentally observed. Our work establishes that Turing patterns can occur at the atomic scale in a hard condensed-matter setting.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ion and water adsorption to graphene and graphene oxide surfaces

Graphene and graphene oxide (GO) are two particularly promising nanomaterials for a range of applications including energy storage, catalysis, and separations. Understanding the nanoscale interactions between ions and water near graphene and GO surfaces is critical for advancing our fundamental knowledge of these systems and downstream application success. Here this minireview highlights the necessity of using surface-specific experimental probes and computational techniques to fully characterize these interfaces, including the nanomaterial, surrounding water, and any adsorbed ions, if present. Key experimental and simulation studies considering water and ion structures near both graphene and GO are discussed. The major findings are: water forms 1–3 hydration layers near graphene; ions adsorb electrostatically to graphene under an applied potential; the chemical and physical properties of GO vary considerably depending on the synthesis route; and these variations influence water and ion adsorption to GO. Lastly, we offer outlooks and perspectives for these research areas.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of diffusion constant on the morphology of dendrite growth in lithium metal batteries

Lithium dendrites can lead to a short circuit and battery failure, and developing strategies for their suppression is of considerable importance. In this work, we study the growth of dendrites in a simple model system where the solvent is a continuum and the lithium ions are hard spheres that can deposit by sticking to existing spheres or the electrode surface. Using stochastic dynamics simulations, we investigate the effect of applied voltage and diffusion constant on the growth of dendrites. We find that the diffusion constant is the most significant factor, and the inhomogeneity of the electric field does not play a significant role. Additionally, the growth is most pronounced when the applied voltage and diffusion constant are both low. We observe a structural change from broccoli to cauliflower shape as the diffusion constant is increased. The simulations suggest that a control of electrolyte parameters that impact lithium diffusion might be an attractive route to controlling dendrite growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing time-resolved plasma-driven solution electrochemistry in a falling liquid film plasma reactor: Identification of HO$^−_2$ as a plasma-derived reducing agent

Many applications involving plasma–liquid interactions depend on the reactive processes occurring at the plasma–liquid interface. In this article, we report on a falling liquid film plasma reactor allowing for in situ optical absorption measurements of the time-dependence of the ferricyanide/ferrocyanide redox reactivity, complemented with ex situ measurement of the decomposition of formate. We found excellent agreement between the measured decomposition percentages and the diffusion-limited decomposition of formate by interfacial plasma-enabled reactions, except at high pH in thin liquid films, indicating the involvement of previously unexplored plasma-induced liquid phase chemistry enabled by long-lived reactive species. We also determined that high pH facilitates a reduction-favoring environment in ferricyanide/ferrocyanide redox solutions. In situ conversion measurements of a 1:1 ferricyanide/ferrocyanide redox mixture exceed the measured ex situ conversion and show that conversion of a 1:1 ferricyanide/ferrocyanide mixture is strongly dependent on film thickness. We identified three dominant processes: reduction faster than ms time scales for film thicknesses >100 µm, •OH-driven oxidation on time scales of <10 ms, and reduction on 15 ms time scales for film thickness <100 µm. We attribute the slow reduction and larger formate decomposition at high pH to HO$^−_2$ formed from plasma-produced H 2 O 2 enabled by the high pH at the plasma–liquid interface as confirmed experimentally and by computed reaction rates of HO$^−_2$ with ferricyanide. Overall, this work demonstrates the utility of liquid film reactors in enabling the discovery of new plasma-interfacial chemistry and the utility of atmospheric plasmas for electrodeless electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Designing Antifouling and Antimicrobial Interfaces: Structural Characterization using CryoEM, Automated Microscopy, and AI Image Segmentation

The design of functionalized surfaces for interactions with biological systems is critical across sectors such as healthcare, energy, and agriculture. Tailoring materials for specific applications, such as antifouling and antimicrobial surfaces, demands a comprehensive understanding of topology and chemistry across multiple length and time scales on both biological and materials systems. This work presents the development and characterization of nanostructured surfaces with controlled topographies and chemistries that enhance bacterial membrane disruption, reduce biofilm formation, and improve antimicrobial and antifouling capabilities. Two specific use cases will be presented - the use of cellulose nanocrystals (CNCs) for bacterial growth inhibition and the development of antifouling surfaces to prevent protein and bacterial adsorption [1-4]. By leveraging large language models (LLMs) for image segmentation and training [5], we enable automated analysis of terabyte-scale cryogenic electron microscopy (cryoEM) datasets. This analysis provides statistical insights into the biotic/abiotic interface and facilitates automated electron microscopy experiments to mitigate time and dose. The integration of cryogenic electron tomography (cryoET) and cryogenic focused ion beam (cryoFIB) milling enables high-resolution, near-native-state imaging and 3D reconstructions of bio/material interfaces [6]. Orthogonal characterization techniques and computational modeling further enhances our understanding, offering a robust platform for the design and optimization of next-generation functional surfaces [7].

Williams, Alexis [ORNL] (ORCID:0000000252835822)↗
DOE OSTI2019

Detecting Sensors and Inferring their Relations at Level-0 in Industrial Cyber-Physical Systems

While there exist tools and techniques to discover, identify, map, and analyze cyber physical components at higher levels of the cyber space, there is a lack of capabilities to reach down to the sensors at the bottom-most levels, such as levels 0 and 1 of the Purdue Enterprise Reference Model for cyber-physical systems (CPS). Conventional information technology (IT)-based tools reach as far as the network-side of programmable logic controllers, but are inadequate to access and analyze the physical side of the CPS infrastructure that directly interfaces with the actual physical processes and systems. In this paper, we present our research and development efforts aimed at addressing this gap, by building a system called Deep-cyberia (Deep Cyber-Physical System Interrogation and Analysis) that incorporates algorithms and interfaces aimed at uncovering sensors and computing estimates of correlations among them.

Perumalla, Kalyan↗
DOE OSTI2018

Alignment Implementation for Manufacturing using Fringe Analysis Slope Technique (AIMFAST) 2018.11.20

AIMFAST is a software code used to align facets on a dish or heliostat solar concentrator to a specific aimpoint strategy to minimize peak fluxes and maximize system optical performance. AIMFAST uses a large monitor or projection screen to display fringe patterns, and a machine vision camera to image the reflection of these patterns in the subject dish mirrors. From these images, a detailed map of surface normals can be generated and compared to design or fitted mirror shapes. This fitted comparison is then used to develop a single vector representing the orientation of the facets relative to the design orientation and provide near-real-time adjustment information to a communicating computer. The communicating computer can display adjustments or directly interface with adjustment tools.

Yellowhair, Julius↗
DOE OSTI2022

OpenTurbine [SWR-23-07]

OpenTurbine is an open-source code designed for the simulation of wind turbine structural dynamics. It is a flexible multi-body dynamics solver wherein the wind turbine is modeled as a collection of beam finite elements, rigid bodies, and constraints. OpenTurbine is equipped with an application programming interface primarily designed for coupling to computational fluid dynamics codes, but it is also suited for coupling to aerodynamics solvers based on blade element momentum theory.

Sprague, MichaelA.↗
DOE OSTI2018

Scalable deep text comprehension for Cancer surveillance on high-performance computing

Background: Deep Learning (DL) has advanced the state-of-the-art capabilities in bioinformatics applications which has resulted in trends of increasingly sophisticated and computationally demanding models trained by larger and larger data sets. This vastly increased computational demand challenges the feasibility of conducting cutting-edge research. One solution is to distribute the vast computational workload across multiple computing cluster nodes with data parallelism algorithms. In this study, we used a High-Performance Computing environment and implemented the Downpour Stochastic Gradient Descent algorithm for data parallelism to train a Convolutional Neural Network (CNN) for the natural language processing task of information extraction from a massive dataset of cancer pathology reports. We evaluated the scalability improvements using data parallelism training and the Titan supercomputer at Oak Ridge Leadership Computing Facility. To evaluate scalability, we used different numbers of worker nodes and performed a set of experiments comparing the effects of different training batch sizes and optimizer functions.Results: We found that Adadelta would consistently converge at a lower validation loss, though requiring over twice as many training epochs as the fastest converging optimizer, RMSProp. The Adam optimizer consistently achieved a close 2nd place minimum validation loss significantly faster; using a batch size of 16 and 32 allowed the network to converge in only 4.5 training epochs.Conclusions: We demonstrated that the networked training process is scalable across multiple compute nodes communicating with message passing interface while achieving higher classification accuracy compared to a traditional machine learning algorithm.

Qiu, John X.↗
DOE OSTI2018

SciDAC – PSI: Plasma Surface Interactions involving Tungsten - A Summary of Project Accomplishments

Gaining physics understanding and predictive capabilities to describe the evolution of plasma facing components (PFC) requires simultaneously addressing complex and diverse physics occurring over a wide range of length and time scales, as well as integrating extensive physical processes across the plasma - surface - bulk materials boundaries. This requires development not only of detailed physics models and computational strategies at each of these scales, but computer science algorithms and methods to strongly couple them in a way that can be robustly validated through comparisons against available data and new experiments. Therefore, the objective of this project is to develop robust, high-fidelity simulation tools capable of predicting the PFC operating lifetime and the PFC impact on plasma contamination, recycling of hydrogenic species, and tritium retention in future magnetic fusion devices, with a focus on tungsten based material systems. Deploying these tools requires the development of a leadershipscale computational code, as well as a host of simulations that span the multiple scales needed to address complex physical and computational issues at the plasma - surface interface and the transition below the surface where neutron damage processes in the bulk material dominate behavior in multiple-component materials systems. Successful development will enable improved prediction of PFC performance needed to ensure magnetic fusion energy development beyond ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗