Search NASA⌕ Search

SEARCH · Search NASA

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Experimental confirmation of first-principles thermal conductivity in Zirconium-doped ThO 2

The degradation of thermal conductivity in advanced nuclear fuels due to the accumulation of fission products and irradiation-induced defects is inevitable, and must be considered as part of safety and efficiency analyses of nuclear reactors. Here, this study examines the thermal conductivity of a zirconium-doped ThO 2 crystal, synthesized via the hydrothermal method using a spatial domain thermoreflectance technique. Zirconium is one of the soluble fission products in oxide fuels that can effectively scatter heat-carrying phonons in the crystalline lattice of fuel. Thus, thermal property measurements of zirconium-doped ThO 2 single crystals provide insights into the effects of substitutional zirconium doping, isolated from extrinsic factors such as grain boundary scattering. The experimental results are compared with first-principles calculations of the lattice thermal conductivity of ThO 2 , employing an iterative solution of the Peierls-Boltzmann transport equation. Additionally, the non-perturbative Green's function methodology is utilized to compute phonon-point defect scattering rates, accounting for local distortions around point defects, including mass difference changes, interatomic force constants, and structural relaxation. The congruence between the predicted results from first-principles calculations and the measured temperature-dependent thermal conductivity validates the computational methodology. Furthermore, the methodologies employed in this study enable systematic investigations of thermal conductivity reduction by fission products, potentially leading to the development of more accurate fuel performance codes.

36 - MATERIALS SCIENCE↗

In situ anodic electrodeposition of two-dimensional conductive metal-organic framework@nickel foam for high-performance flexible supercapacitor

Owing to their large specific surface area and well-defined porosity, metal-organic frameworks (MOFs) have long been considered as promising materials for energy storage. Unfortunately, their straightforward utilization in supercapacitors was hindered for years due to poor conductivity until the emergence of 2D conductive MOF materials. To date, several 2D conductive MOF-based supercapacitors have been reported. Nevertheless, almost all these supercapacitors were fabricated from MOF powders through a slurry coating method or dense packing method, which negatively affected their capacitor performance. Herein, we have developed an anodic electrodeposition (AED) approach to fabricate a uniformly deposited 2D conducting MOF on nickel foam and use it directly as electrodes for supercapacitors without any additives. Finally, the superior performance of the 2D conducting MOF on nickel foam in both aqueous and organic electrolytes was then disclosed by a series of electrochemical measurements, demonstrating the significant advantages of the AED approach over traditional methods.

2D conductive metal-organic frameworks↗

Coupled theoretical interpretation and experimental investigation of the anisotropy of the lattice thermal conductivity of Bi{sub 2}Te{sub 3} single crystal

The Debye model is modified for the calculation of the lattice thermal conductivity and used to gain insight into the anisotropy of Bi{sub 2}Te{sub 3}. In this work, the Debye temperature is not used to estimate the cutoff frequencies of the phonons that carry heat. The cutoff frequencies are defined by setting an upper limit to the energy of acoustic phonons using the complete dispersion relations. The anisotropy of the thermal conductivity is found to be unrelated to the anisotropy of the sound velocities. It is found that the sound velocity is almost isotropic when the longitudinal and two transversal waves are added together. In addition the relaxation time must be a function of the cutoff frequencies and counterbalances the anisotropy arising from the variation of the number of acoustic phonons traveling in various directions. It is concluded that the anisotropy of the thermal conductivity is mostly related to the Grueneisen's constant. - Graphical abstract: Dispersion relations of Bi{sub 2}Te{sub 3} along c-axis. The cutoff frequencies are found to be anisotropic and are defined exactly in this article where the acoustic branch crosses the optical branch. This affects both the number of phonons that carry heat in a given direction and the number of phonons that can scatter them. This is decisive for understanding the lattice thermal conductivity. Highlights: Black-Right-Pointing-Pointer Prediction of the anisotropy of the lattice thermal conductivity. Black-Right-Pointing-Pointer Provide a definition of the cutoff frequencies that makes sense. Black-Right-Pointing-Pointer Reduction of the number of frees parameter in phenomenological model. Black-Right-Pointing-Pointer Prediction that the anisotropy is a function of the scattering mechanism. Black-Right-Pointing-Pointer Means of experimental verification of theory.

36 MATERIALS SCIENCE↗

Two proton-conductive hybrids based on 2,2 Prime -biimidazole molecules and Keggin-type heteropolyacids

Two proton-conductive organic/inorganic complexes were constructed by Keggin-type heteropolyacids and 2,2 Prime -biimidazole molecules. Single-crystal X-ray diffraction analyses revealed that two complexes crystallized in the triclinic space group Pi, exhibited very close unit cell parameters, and presented similar three-dimensional (3D) hydrogen-bonded networks constructed by H{sub 2}biim, [PM{sub 12}O{sub 40}]{sup 3-} (M=W for 1 and Mo for 2) and solvent molecules. The results of thermogravimetric analyses (TG) suggest that two supramolecular complexes have similar thermal stability based on the same 3D packing. Two complexes at 100 Degree-Sign C under 98% relative humidity showed a good proton conductivity of about 10{sup -4} S cm{sup -1}. A possible mechanism of the proton conduction was proposed according to the experimental results. - Graphical Abstract: Two molecular hybrids constructed by Keggin-type heteropolyacids and 2,2 Prime -biimidazole molecules showed good proton conductivities of 10{sup -4} S cm{sup -1} in the temperature range of 85-100 Degree-Sign C under 98% relative humidity. Highlights: Black-Right-Pointing-Pointer H{sub 2}biim shows the ability to form hydrogen bonds via the N-H groups in the context of crystal engineering. Black-Right-Pointing-Pointer Heteropolyacids have suitable characteristics to be used excellent proton conductors. Black-Right-Pointing-Pointer Two new supramolecular complexes based-on Keggin-type heteropolyacids and H{sub 2}biim molecules were constructed. Black-Right-Pointing-Pointer The structure was determined by using single-crystal X-ray diffraction data. Black-Right-Pointing-Pointer Both complexes showed good proton conductivities of 10{sup -4} S cm{sup -1} in the temperature range of 85-100 Degree-Sign C.

36 MATERIALS SCIENCE↗

A 3D POM–MOF composite based on Ni(ΙΙ) ion and 2,2´-bipyridyl-3,3´-dicarboxylic acid: Crystal structure and proton conductivity

We have succeeded in constructing a 3D POM–MOF, (H[Ni(Hbpdc)(H₂O)₂]₂[PW₁₂O₄₀]·8H₂O) n (H₂bpdc=2,2´-bipyridyl-3,3´-dicarboxylic acid), by the controllable self-assembly of H₂bpdc, Keggin-anions and Ni²⁺ ions based on the electrostatic and coordination interactions. Interestingly, Hbpdc⁻ as polydentate organic ligands and Keggin-anion as polydentate inorganic ligands are covalently linked transition-metal nickel at the same time. The title complex represents a new example of introducing the metal N-heterocyclic multi-carboxylic acid frameworks into POMs chemistry. Based on Keggin-anions being immobilized as part of the metal N-heterocyclic multi-carboxylic acid framework, the title complex realizes four approaches in the 1D hydrophilic channel used to engender proton conductivity in MOFs. Its water adsorption isotherm at room temperature and pressure shows that the water content in it was 31 cm³ g⁻¹ at the maximum allowable humidity, corresponding to 3.7 water molecules per unit formula. It exhibits good proton conductivities (10⁻⁴–10⁻³ S cm⁻¹) at 100 °C in the relative humidity range 35–98%. The corresponding activation energy (E{sub a}) of conductivity was estimated to be 1.01 eV. - Graphical abstract: A POM–MOF composite constructed by Keggin-type polyanion, Ni²⁺ and H₂bpdc shows good proton conductivities of 10⁻⁴–10⁻³ S cm⁻¹ at 100 °C under 35–98% RH. - Highlights: • A POM–MOF was constructed by combining metal N-heterocyclic multi-carboxylic acid framework and Keggin anion. • It opens a pathway for design and synthesis of multifunctional hybrid materials based on two building units. • Three types of potential proton-carriers have been assembled in the 1D hydrophilic channels of the POM–MOF. • It achieved such proton conductivities as 10⁻⁴–10⁻³ S cm⁻¹ at 100 °C in the RH range 35–98%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, thermal expansion and high-temperature electrical conductivity of A-site deficient La{sub 2−z}Co{sub 1+y}(Mg{sub x}Nb{sub 1−x}){sub 1−y}O{sub 6} double perovskites

New La-deficient double perovskites with P2{sub 1}/n symmetry, La{sub ∼1.90}(Co{sup 2+}{sub 1−x}Mg{sup 2+}{sub x})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} with x=0, 0.13 and 0.33, and La{sub 2}(Co{sup 2+}{sub 1/2}Mg{sup 2+}{sub 1/2}) (Co{sup 3+}{sub 1/2}Nb{sup 5+}{sub 1/2})O{sub 6} were prepared by solid state reaction at 1450 °C. Their crystal structures were refined using time-of-flight neutron powder diffraction data. Our results show that certain cations such as Nb{sup 5+}, with very strong B–O bonds in the perovskite structure, can induce A-site vacancies in double perovskites. Upon heating in N{sub 2} gas atmosphere at 1200 °C ∼1% O atom vacancies are formed together with a partial reduction of the Co{sup 3+} content. The average thermal expansion coefficient between 25 and 900 °C of La{sub 1.90}(Co{sup 2+}{sub 2/3}Mg{sup 2+}{sub 1/3})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} was determined to be 17.4 ppm K{sup −1}. Four-point electronic conductivity measurements showed that the compounds are semiconductors, with conductivities varying between 3.7·10{sup −2} and 7.7·10{sup −2} S cm{sup −1} at 600 °C and activation energies between 0.77 and 0.81 eV. Partial replacement of La{sup 3+} with Sr{sup 2+} does not lead to any increase of conductivity, while replacement of Mg{sup 2+} with Cu{sup 2+} in La{sub 1.9}CoCu{sub 1/3}Nb{sub 2/3}O{sub 6} and La{sub 1.8}CoCu{sub 1/2}Nb{sub 1/2}O{sub 6} leads to ∼100 times larger conductivities at 600 °C, 0.35 and 1.0 S cm{sup −1}, respectively, and lower activation energies, 0.57 and 0.73 eV, respectively. - Highlights: • Double perovskites, P2{sub 1}/n, La{sub 2−z}(Co{sup 2+}{sub 1−x}Mg{sup 2+}{sub x})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} have been synthesized. • Crystal structures have been refined using neutron powder diffraction data. • Strong Nb–O bond and size ordering of Mg{sup 2+}/Co{sup 2+} and Nb{sup 5+}/Co{sup ~3+} leads to La-deficiency. • The compounds are semi conductors (~10{sup −2} S cm{sup −1}) at 600 °C. • Replacement of Mg{sup 2+} with Cu{sup 2+} leads to higher conductivity (~1.0 S cm{sup −1}) at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of nickel doping on oxygen-ionic conductivity of the n = 1 Ruddlesden-Popper Phases La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} (δ = 0.0905)

The results of the synthesis and characterization of the optimally doped La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4-δ} solid solution with x = 0, 0.1, 0.2 and 0.3 are reported. The versatility of these La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} materials is explained on the basis of structural features and the ability to accommodate oxygen nonstoichiometry. According to powder X-ray and neutron diffraction data, La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} adopts the tetragonal structure with oxygen vacancies occurring preferentially at the O{sub ap} sites within the {(La/Ca)O} layers of the perovskite blocks and the oxygen deviation from stoichiometry δ was found to be δ=0.0905(6). The bulk conductivity indicated an Arrhenius-type thermally activated process and oxygen vacancies are the possible ionic charge carriers at T=270 °C. An increase of the conductivity was detected when Ni was introduced. With nickel ratio variation, a strong correlation was observed between the Cu(Ni)-O{sub ap} apical bond length variation and the conductivity variation through controlling the O{sup 2−} ion migration. - Highlights: • We report the synthesis and structure of the La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} (0≤x≤0.3; δ=0.0905) compounds. • La{sub 1.85}Ca{sub 0.15}(Cu{sub 1−x}Ni{sub x})O{sub 4−δ} (x=0.0, 0.2, 0.3) doped with Ni{sup 2+} have a higher conductivity than undoped La{sub 1.85}Ca{sub 0.15}CuO{sub 4−δ}. • At T=270 °C, sample x=0.3 has the highest conductivity (0.2915 sm{sup −1}).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anisotropy in thermal conductivity of graphite flakes–SiC{sub p}/matrix composites: Implications in heat sinking design for thermal management applications

Within the frame of heat dissipation for electronics, a very interesting family of anisotropic composite materials, fabricated by liquid infiltration of a matrix into preforms of oriented graphite flakes and SiC particles, has been recently proposed. Aiming to investigate the implications of the inherent anisotropy of these composites on their thermal conductivity, and hence on their potential applications, materials with matrices of Al–12 wt.% Si alloy and epoxy polymer have been fabricated. Samples have been cut at a variable angle with respect to the flakes plane and thermal conductivity has been measured by means of two standard techniques, namely, steady state technique and laser flash method. Experimental results are presented and discussed in terms of current models, from which important technological implications for heat sinking design can be derived. - Highlights: • Anisotropy in thermal conductivity of graphite flakes-based composites is evaluated. • Samples are cut in a direction forming a variable angle with the oriented flakes. • For angles 0° and 90°, thermal conductivity does not depend on sample geometry. • For intermediate angles, thermal conductivity strongly depends on sample geometry. • “Thin” samples must be thicker than 600 μm, “thick” samples must be encapsulated.

36 MATERIALS SCIENCE↗

Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion

Highlights: • Al-Mg-Si alloy was subjected to hydrostatic extrusion combined with aging treatment. • UFG Al-Mg-Si alloy with UTS of 332 MPa and conductivity of 58% IACS was obtained. • Precipitation process depended on applied strains and crystallographic texture. • Strengthening effect was achieved by UFG structure and needle-like β″ precipitates. • Precipitation of β″ and spherical β′/β particles at GB provided high conductivity. - Abstract: The effect of hydrostatic extrusion combined with an artificial aging on microstructure, mechanical and electrical properties of 6101 Al-Mg-Si alloy was investigated. It has been shown that such thermo-mechanical treatment is an effective method for producing of long wires with an ultrafine-grained microstructure (grain size of 300–400 nm) and enhanced ultimate tensile strength (> 330 MPa) and electrical conductivity (up to 58% IACS). The mechanical behavior of 6101 Al-Mg-Si alloy depended strongly on applied strains by hydrostatic extrusion and crystallographic texture. Higher accumulative strain accelerated the precipitation kinetics but decreased the age hardening response. The double fiber <100> and <111> texture was observed for hydrostatically extruded samples. The <001> grains with homogenously distributed needle-like β″ precipitates provided precipitation strengthening of material while <111> grains resulted in more efficient grain boundary strengthening. Quantitative microstructure characterization allowed adjusting physical model to estimate the electrical conductivity and compare it with experimental data. The high conductivity was provided mainly by decomposition of solid solution due to precipitation of needle-like β″ precipitates in the grain interior and spherical β′ or β particles located at grain boundaries.

36 MATERIALS SCIENCE↗

Effect of nanocrystallization on the electrical conductivity enhancement and Moessbauer hyperfine parameters of iron based glasses

Selected glasses of Fe{sub 2}O{sub 3}-PbO{sub 2}-Bi{sub 2}O{sub 3} system have been transformed into nanomaterials by annealing at temperature close to crystallization temperature (T{sub c}) for 1 h. The effects of the annealing of the present samples on its structural and electrical properties were studied by Moessbauer spectroscopy, transmission electron micrograph (TEM), differential scanning calorimeter (DSC) and dc conductivity ({sigma}). Moessbauer spectroscopy was used in order to determine the states of iron and its hyperfine structure. The effect of nanocrystalization on the Moessbauer hyperfine parameters did not exhibit significant modifications in present glasses. However, in case of glass ceramic nanocrystals show a distinct decrease in the quadrupole splitting ({Delta}) is observed, reflecting an evident decrease in the distortion of structural units like FeO{sub 4} units. In general, the Moessbauer parameters of the nano-crystalline phase exhibit tendency to increase with PbO{sub 2} content. TEM of as-quenched glasses confirm the homogeneous and essentially featureless morphology. TEM of the corresponding glass ceramic nanocrystals indicates nanocrystals embedded in the glassy matrix with average particle size of about 32 nm. The crystallization temperature (T{sub c}) was observed to decrease with PbO{sub 2} content. The glass ceramic nanocrystals obtained by annealing at T{sub c} exhibit improvement of electrical conductivity up to four orders of magnitude than the starting glasses. This considerable improvement of electrical conductivity after nanocrystallization is attributed to formation of defective, well-conducting phases 'easy conduction paths' along the glass-crystallites interfaces.

36 MATERIALS SCIENCE↗

Sol–gel synthesis and lithium ion conduction properties of garnet-type Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12}

Graphical abstract: Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12}, prepared by sol–gel synthesis method, shows a total Li-ion conductivity of 1.69 × 10{sup −5} S/cm at 298 K and an activation energy is 0.40 eV. Highlights: ► Garnet-type fast ion conductor LLBTO was synthesized by modified sol–gel Pechini method. ► The synthesis temperature is significantly lower (200 K) than conventional solid state synthesis methods. ► The ionic conductivity of sol–gel synthesized LLBTO is 1.69 × 10{sup −5} S/cm. -- Abstract: High lithium ion conductive garnet-type barium lanthanum lithium tantalate, Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12} (LLBTO), was prepared by a modified sol–gel Pechini method from the appropriate mixtures of lithium carbonate, lanthanum oxide, barium carbonate and tantalum ethoxide. The thermal decomposition of the precursor powder was investigated by TG/DTA analysis. The LLBTO precursor powders were annealed at various temperatures between 923 and 1123 K for 6 h in air. The transformation process from precursor powder to crystalline garnet-like phase was analyzed by X-ray powder diffraction (XRPD). The morphology of the powders annealed at various temperatures was investigated by scanning electron microscopy (SEM). The resultant pelletized Li{sub 6}BaLa{sub 2}Ta{sub 2}O{sub 12}, prepared by sol–gel synthesis method, shows a total Li-ion conductivity of 1.69 × 10{sup −5} S/cm at 298 K and an activation energy is 0.40 eV. The ionic conductivities reported in this study are slightly higher than those reported for LLBTO sample synthesized by conventional solid state synthesis route.

36 MATERIALS SCIENCE↗

Novel lithium titanate-graphene hybrid containing two graphene conductive frameworks for lithium-ion battery with excellent electrochemical performance

Graphical abstract: We developed a new Novel lithium titanate-graphene nanohybrid containing two graphene conductive frameworks. The unique architecture creates fast electron transfer and rapid mass transport of electrolyte. The hybrid electrode provides excellent electrochemical performances for lithium-ion batteries, including high specific capacity, outstanding rate capability and intriguing cycling stability. - Highlights: • We reported a new LTO-graphene nanohybrid containing two graphene conductive frameworks. • One graphene framework greatly improves the electrical conductivity of LTO crystal. • Another graphene framework enhances electrical conductivity of between LTO crystals and electrolyte transport. • The unique architecture creates big tap density, ultrafast electron transfer and rapid mass transport. • The hybrid electrode provides excellent electrochemical performance for lithium-ion batteries. - ABSTRACT: The paper reported the synthesis of lithium titanate(LTO)-graphene hybrid containing two graphene conductive frameworks (G@LTO@G). Tetrabutyl titanate and graphene were dispersed in tertbutanol and heated to reflux state by microwave irradiation. Followed by adding lithium acetate to produce LTO precursor/graphene (p-LTO/G). The resulting p-LTO/G offers homogeneous morphology and ultra small size. All graphene sheets were buried in the spherical agglomerates composed of primitive particles through the second agglomeration. The p-LTO/G was calcined to LTO@graphene (LTO@G). To obtain G@LTO@G, the LTO@G was further hybridized with graphene. The as-prepared G@LTO@G shows well-defined three-dimensional structure and hierarchical porous distribution. Its unique architecture creates big tap density, fast electron transfer and rapid electrolyte transport. As a result, the G@LTO@G provides high specific capacity (175.2 mA h g{sup −1} and 293.5 mA cm{sup −3}), outstanding rate capability (155.7 mAh g{sup −1} at 10C) and intriguing cycling stability (97.2% capacity retention at 5C after 1000 cycles)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of temperature and frequency on ionic conductivity of Li{sub 3}PO{sub 4}–Pb{sub 3}(PO{sub 4}){sub 2}–BiPO{sub 4} phosphate glasses

Highlights: • Results of ionic conductivities of Li{sub 3}PO{sub 4}–Pb{sub 3}(PO{sub 4}){sub 2}–BiPO{sub 4} phosphate glasses. • Determination of glass transition temperature using DSC method. • Study of temperature and frequency on ionic conductivity of Li{sub 3}PO{sub 4}–Pb{sub 3}(PO{sub 4}){sub 2}–BiPO{sub 4} phosphate glasses. - Abstract: Lithium–Lead–Bismuth phosphates glasses having, a composition 30Li{sub 3}PO{sub 4}–(70 − x)Pb{sub 3}(PO{sub 4}){sub 2}–xBiPO{sub 4} (45 ≤ x ≤ 60 mol%) were prepared by using the melt quenching method 1000 °C. The thermal stability of theses glasses increases with the substitution of Bi{sub 2}O{sub 3} with PbO. The ionic conductivity of all compositions have been measured over a wide temperature (200–500 °C) and frequency range (1–106 Hz). The ionic conductivity data below and above T{sub g} follows Arrhenius and Vogel–Tamman–Fulcher (VTF) relationship, respectively. The activation energies are estimated and discussed. The dependence in frequency of AC conductivity is found to obey Jonscher’s relation.

36 MATERIALS SCIENCE↗

Electrical properties and conduction mechanism study by OLPT model of NaZnPO4 compound

Highlights: • The crystal structure was resolved using Fullproof program. • The conduction in NaZn PO{sub 4} is insured by OLPT model. • Ac conductivity of NaZn PO{sub 4} compound obeys the Joncher’s law. - Abstract: A polycrystalline sample with NaZnPO{sub 4} stoichiometry was synthesized by the conventional solid-state reaction and then identified and characterized by X-ray powder diffraction, Raman spectroscopy and impedance spectroscopy. The X-ray diffraction pattern revealed that the composite represents a single phase that crystallizes in the monoclinic system with a P2{sub 1}/n space group. All vibration modes of tetrahedral PO{sub 4} appeared in the Raman spectrum. Besides, the electrical conductivity behavior of the title compound was analysed as a function of frequency ranging from 209 Hz to 1 MHz and at a temperature interval ranging from 578 K to 728 K by means of impedance spectroscopy to elucidate the conduction mechanism in this compound. The temperature dependence of frequency exponent ′s′ showed that the conduction in NaZnPO{sub 4} is insured by the overlapping large polaron tunneling (OLPT) model. A correlation between electrical and structural properties was also depicted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced proton conductivity and dimensional stability of proton exchange membrane based on sulfonated poly(arylene ether sulfone) and graphene oxide

Highlights: • Proton conductivity of SPAES-GO-x membranes enhanced with increasing GO content. • Incorporating GO into SPAES matrix restrained SPAES-GO-x membranes swelling. • GO promoted the sulfonic acid groups of SPAES molecular chain aggregation (big ionic clusters) to enhance proton transport. - Abstract: A series composited membranes of sulfonated poly(arylene ether sulfone) and graphene oxide (SPAES-GO-x) have been exploited as proton exchange membrane. The properties of SPAES-GO-x membranes were evaluated including proton conductivity, water uptake, swelling ratio, oxide and thermal stability. Incorporating GO into SPAES matrix restrained the composite membranes swelling and enhanced their proton conductivity. The SPAES-GO-3% membrane showed a conductivity value of 0.183 S cm{sup −1} at 120 °C and relative humidity 100%. Compared with the pristine SPAES membrane, the swelling ratio of SPAES-GO-2% membrane was reduced by 55.7% at 90 °C. Small-Angle X-ray Scattering (SAXS) revealed GO promoted SPAES molecular chain movement to form bigger ionic clusters in favor of enhancing proton transport. X-Ray Diffraction and Field Emission Scanning Electron Microscope (XRD and FE-SEM) analysis further demonstrated GO was exfoliated and distributed throughout the SPAES matrix. These results indicated GO was an effective filler to trade off proton conductivity and swelling of composite membrane.

36 MATERIALS SCIENCE↗

Understanding effects of conductive additives in lithium-sulfur batteries

Since 2009, lithium-sulfur (Li-S) batteries have been attracting much research interest, ascribed to their high energy density and cost-effectiveness. However, their S cathodes are harassed by the poor conductivity, shuttling of lithium polysulfides (LPSs), and large volume change. In improving conductivity of S cathodes, carbon materials are widely used as conductive additives. However, there still lacks a comparative study on their geometric and structural effects in Li-S batteries. To this end, a systematic investigation is conducted on two different typical conductive additives, carbon black (CB) 1 and nitrogen-doped graphene nanosheets (N-GNS) 2 . This work reveals that, compared to the zero-dimensional (0D) CB nanoparticles, the two-dimensional (2D) N-GNS is structurally less defective and has a larger surface area. Furthermore, as a result, the 2D structure of the N-GNS helps achieve higher capacity retention but inhibits Li-ion transportation. In comparison, the 0D structure of the CB facilitates the transportation of Li-ions with a higher initial capacity but exposed to a severer shuttling behavior of LPSs. It is also found that a combination of the CB and N-GNS enables better performance of Li-S batteries, in terms of sustainable capacity, Coulombic efficiency, and rate capability. This study is inspiring for designing better S cathodes for Li-S batteries.

25 ENERGY STORAGE↗

Mg vacancy and impurity-limited MgO single crystal thermal conductivity

Magnesium oxide (MgO) exhibits one of the highest thermal conductivities among oxides and is widely used as a dielectric material and substrate in semiconductor devices, in refractory applications, and as a promising filler in thermal interface materials for electronics. Its high thermal conductivity may be sensitive to impurity and defects, yet this influence is still uncertain. Here, in this study, the impact of the common impurities, i.e., Al, Ca, Ti, V, Fe, Si, B, Nb, Zr, Na, and K, as well as Mg and O vacancies on phonon scattering and thermal conductivity of MgO is studied using a fully first-principles T-matrix framework. It is found that B, Nb, and Zr impurities, along with Mg vacancies, lead to exceptionally strong reductions in thermal conductivity. By contrast, O vacancies and other impurities have modest to minimal impacts. Leveraging the T-matrix results, we reassess the perturbative, mass-only formalism whose use is pervasive in the literature and show that neglecting bond disorder does not necessarily lead to underestimation: for all transition-metal impurities studied, bond perturbations partially cancel mass disorder, causing the traditional perturbative model to overestimate scattering. We propose a simple modified perturbative expression that incorporates both mass and bond disorder and closely reproduces the T-matrix trends. Our predicted low-temperature trends by including phonon-impurity and phonon-boundary scattering match reasonably well with experiments. This work provides an in-depth study of impurity- and vacancy-limited thermal conductivity of MgO and suggests that reported “high-purity” MgO values have likely not yet reached the intrinsic upper limit, which may be substantially higher.

36 - MATERIALS SCIENCE↗

Unveiling the critical role of interfacial ionic conductivity in all-solid-state lithium batteries

Advancement of all-solid-state lithium-ion (Li + ) batteries (ASSLIBs) has been hindered by the large interfacial resistance mainly originating from interfacial reactions between oxide cathodes and solid-state sulfide electrolytes (SEs). To suppress the interfacial reactions, an interfacial coating layer between cathodes and SEs is indispensable. However, the kinetics of interfacial Li + transport across the coating layer has not been well understood yet. Herein, we tune the interfacial ionic conductivity of the coating layer LiNb 0.5 Ta 0.5 O 3 (LNTO) by manipulating post-annealing temperature. It is found that the interfacial ionic conductivity determines interfacial Li + transport kinetics and enhancing the interfacial ionic conductivity can significantly boost the electrochemical performance of SE-based ASSLIBs. A representative cathode LiNi 0.5 Mn 0.3 Co 0.2 O 2 coated by LNTO with the highest interfacial ionic conductivity exhibits a high initial capacity of 152 mAh.g -1 at 0.1 C and 107.5 mAh.g -1 at 1C. This work highlights the importance of increasing interfacial ionic conductivity for high-performance SE-based ASSLIBs.

25 ENERGY STORAGE↗