Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reporting formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Isolated cold plasma regions: Observations and their relation to possible production mechanisms

Regions of enhanced cold plasma, isolated from the main plasmasphere along the Explorer 45 orbit on the equatorial plane, are reported using the sheath induced potentials seen by the electric field experiment. The occurrence of these regions has a strong correlation with negative enhancements of Dst, and their locations are primarily in the noon-dusk quadrant. The data support the concept that changes in large scale convection play a dominant role in the formation of these regions. Plasmatails that are predicted from enhancements of large scale convection electric fields in general define where these regions may be found. More localized processes are necessary to account for the exact configuration and structure seen in these regions and may eventually result in detachment from the main plasmasphere.

Maynard, N. C.↗

ALMA Detection and Astrobiological Potential of Vinyl Cyanide on Titan

Recent simulations have indicated that vinyl cyanide is the best candidate molecule for the formation of cell membranes/vesicle structures in Titan's hydrocarbon-rich lakes and seas. Although the existence of vinyl cyanide (C2H3CN) on Titan was previously inferred using Cassini mass spectrometry, a definitive detection has been lacking until now. We report the first spectroscopic detection of vinyl cyanide in Titan's atmosphere, obtained using archival data from the Atacama Large Millimeter/submillimeter Array (ALMA), collected from February to May 2014. We detect the three strongest rotational lines of C2H3CN in the frequency range of 230 to 232 GHz, each with greater than 4 sigma confidence. Radiative transfer modeling suggests that most of the C2H3CN emission originates at altitudes of approx. greater than 200 km, in agreement with recent photochemical models. The vertical column densities implied by our best-fitting models lie in the range of 3.7 x 10(exp 13) to 1.4 x 10(exp 14) cm(exp −2). The corresponding production rate of vinyl cyanide and its saturation mole fraction imply the availability of sufficient dissolved material to form approx. 10(exp 7) cell membranes/cu cm in Titan's sea Ligeia Mare.

Palmer, Maureen Y.↗

First Look at Smoke Emissions from Prescribed Burns in Long-unburned Longleaf Pine Forests

While fire has long played a role in the longleaf pine ecosystem, there are still some stands in the southeastern United States where fire has not been reintroduced and fuels have accumulated for 50 years or more. As part of a larger study examining fuel loading and smoke emissions on Department of Defense installations in the southeastern U.S., fuels and trace emissions were measured during three prescribed burns at Ft. Jackson Army Base near Columbia, South Carolina in November 2011. These pine-forest understory fires provided valuable emissions data for fires that burned in stands that had little or no exposure to fire for decades. Smoke emissions were measured on the ground and from an aircraft by scientists from a large team of atmospheric researchers. (Akagi et al., 2013) To characterize initial emissions in the lofted plume and in point sources of residual smoldering combustion, trace-gas species were measured using an airborne FTIR and a ground-based FTIR, respectively. Whole-air sampling canisters were also collected from both ground- and airborne-based platforms. A total of 97 trace gases were quantified in this work, largely via infrared spectroscopy. Selected emissions data were compared with similar data collected from prescribed burns sampled in coastal North Carolina in 2010 in younger fuels beds of loblolly/longleaf stands near Camp Lejeune (Burling et al., 2011). The emission factors measured in this work differ by ~13-195% to EF measured from the managed stands at Camp Lejeune for organic and N-containing species, suggesting that fire emissions in similar ecosystems can exhibit large variability. Part of the differences, however, may be ascribed to burn conditions as well since the NC burns were during the wet season whereas the SC stands were burned after an extended drought. We also report the first detailed FTIR emissions data for a suite of monoterpenes. Figure 1 displays the emission factors (g/kg fuel) for several monoterpenes and isoprene as measured by the ground-based FTIR system. Due to their unsaturated structure, terpenes are highly reactive compounds emitted from plants thought to contribute to secondary organic aerosol formation (SOA) (Saathoff et al., 2009; Hennigan et al., 2011) and the formation of small oxygenated volatile organic compounds (OVOCs) (Jacob et al., 2002) in fire plumes. The known chemistry and measured abundance of monoterpenes suggests that these species impacted secondary plume processes including ozone, OVOC, and SOA formation in sampled plumes within the first few hours after emission.

biomass burning↗

A report on the use of thermal scanner data in an operational program for monitoring apparent rooftop temperatures

CENGAS, a division of Central Telephone and Utilities Corporation in cooperation with the Remote Sensing Institute, South Dakota State University, is using airborne thermal scanner data to monitor relative rooftop temperatures. Four Nebraska communities and one South Dakota community were surveyed by the Remote Sensing Institute for CENGAS. Thermal scanner data were converted to a film format and the resultant imagery has been successfully employed by CENGAS. The program places emphasis on heat losses resulting from inadequate home insulation, offers CENGAS customers the opportunity to observe a thermogram of their rooftop, and assists homeowners in evaluating insulation needs.

Bjorklund, J.↗

Developing a complete AI-accelerated workflow for superconductor discovery

The quest to identify new superconducting materials with enhanced properties is hindered by the prohibitive cost of computing electron-phonon spectral functions, severely limiting the materials space that can be explored. Here, we introduce a Bootstrapped Ensemble of Equivariant Graph Neural Networks (BEE-NET), a machine-learning model trained to predict the Eliashberg spectral function and superconducting critical temperature with a mean-absolute-error of 0.87 K relative to DFT-based Allen-Dynes calculations. Intriguingly, BEE-NET achieves a true-negative-rate of 99.4%, enabling highly efficient screening for the rare property of superconductivity. Integrated into a multi-stage, AI-accelerated discovery pipeline that incorporates elemental-substitution strategies and machine-learned interatomic potentials, our workflow reduced over 1.3 million candidate structures to 741 dynamically and thermodynamically stable compounds with DFT-confirmed T c > 5 K. We report the successful synthesis and experimental confirmation of superconductivity in two of these previously unreported compounds. This study establishes a data-driven framework that integrates machine learning, quantum calculations, and experiments to systematically accelerate superconductor discovery.

Gibson, Jason B. [Quantum Formatics, Cambridge, MA↗

SBIR Phase I Final Report, TACO: Distributed and Heterogeneous Sparse Compiler

Tensor algebra is a powerful tool for computing, but writing optimized codes that operate on sparse tensors can be very complex. This project enables a Tensor Algebra Compiler (TACO) that simplifies this task from man-years to man-days and extends TACO to support complex and large distributed systems. This report details the hypotheses, approaches used, and findings in this project.

97 MATHEMATICS AND COMPUTING↗

Organic Aerosol Component (OACOMP) Value-Added Product (Report)

Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

54 ENVIRONMENTAL SCIENCES↗

A close correlation between nanostructure formations and the thickness dependence of the critical current density in pure and BaSnO{sub 3}-added GdBa{sub 2}Cu{sub 3}O{sub 7-δ} films

A close correlation between the nanostructure formations and the thickness dependence of the in-field critical current density (J{sub c}) in GdBa{sub 2}Cu{sub 3}O{sub 7-δ} (GdBCO) films is reported. Pure and 2 wt. % BaSnO{sub 3} (BSO)-added GdBCO films with film thicknesses (d) ranging from 0.2 μm to 1.5 μm were deposited on SrTiO{sub 3} single-crystalline substrates by using a pulsed laser deposition technique. Magnetization data measured at 77 K with the magnetic field applied parallel to the c-axis of the films showed the general trend of decreasing in-field J{sub c} with increasing residual film thickness. The two special inversions, however, were observed at d ∼ 0.6 μm, for which the J{sub c}’s of both the pure and BSO-added GdBCO films were larger than those of the films with d ∼ 0.4 μm. A sequential ion-milling process and scanning electron microscopy studies were employed to examine the microstructural evolution in the 1.5- μm-thick GdBCO films. For the pure GdBCO films, nanosized dislocations were observed to start growing at intersections of perpendicularly connected a-axis-oriented grains in a residual film thickness (t) of ∼ 0.6 μm and the growth persisted to the top surface of the 1.5-μm-thick GdBCO film. For the BSO-added GdBCO films, the density of BSO nanorods was estimated to be decreased versus t with an increase found at t of ∼ 0.6 μm A reason for this inversions of J{sub c} might be the nanostructure formations at t ∼ 0.6 μm, which were proved to serve as effective pinning centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An integrated view of the methane system in the pockmarks at Vestnesa Ridge, 79°N

The Vestnesa Ridge is a NW-SE trending, ~ 100 km-long, 1–2 km-thick contourite sediment section located in the Arctic Ocean, west of Svalbard, at 79°N. Pockmarks align along the ridge summit at water depths of ~ 1200 m; they are ~ 700 m in diameter and ~ 10 m deep relative to the surrounding seafloor. Observations of methane seepage in this area have been reported since 2008. In this report we summarize and integrate the available information to date and report on the first detailed seafloor imaging and camera-guided multicore sampling at two of the most active pockmarks along Vestnesa Ridge, named Lomvi and Lunde. We correlate seafloor images with seismically defined subseafloor structures, providing a geological and ecological context to better understand pockmark formation. Subbottom and seismic surveys, water column imaging, geochemical data and seafloor observations indicate ongoing fluid flow at these pockmarks. Visual inspection and sampling using a high-resolution deep-sea camera and multicorer system show exposed gas hydrate and authigenic carbonate in association with biota within two of these pockmarks. Distributed methane venting at both Lomvi and Lunde supports extensive chemosynthetic communities that include filamentous sulfide-oxidizing bacteria and siboglinid tubeworms, all of which utilize chemical energy provided by the seeping fluids. Focused venting forms shallow gas hydrate, and sustains localized gas discharge from 50-m wide pits within the pockmarks. Cycles of carbonate precipitation and/or exhumation of carbonate deposits are indicated by scattered blocks of various size, pavements, and massive carbonate blocks up to 3 m high. Consistent with other observations along continental margin settings, we show that the extensive authigenic carbonate deposits in the Vestnesa pockmarks represent an important and prolonged methane carbon sink that prevents much of the upwardly flowing methane from reaching the overlying ocean.

58 GEOSCIENCES↗

Effect of Sintering Temperature on Dielectric Properties of Iron Deficient Nickel-Ferrite

Nickel Ferrite among all the magneto ceramic materials have been studied very much due to its large number of applications. But there is a large scope of modification of its properties. Thus people still working on it for improvisation of its properties via compositional and structural modifications. Present paper reporting the preparation and characterization of iron deficient Nickel ferrite for different sintering temperature. Ferrite samples having the general formula NiFe1.98O{sub 4} were prepared using the standard ceramic method. The phase formation was confirmed by X-ray diffraction technique. The effect of sintering temperature on the electrical properties and resistivity was studied. The data shows that dielectric properties are highly dependent on the sintering temperature.

36 MATERIALS SCIENCE↗

Scaling relations between warm galactic outflows and their host galaxies

We report on a sample of 48 nearby, star-forming galaxies observed with the Cosmic Origin Spectrograph on the Hubble Space Telescope. We measure the kinematics of warm gas in galactic outflows using a combination of four Si ii absorption lines. We use multi-wavelength ancillary data to estimate stellar masses (M{sub *}), star formation rates (SFR), circular velocities (v{sub circ}), and morphologies. The galaxies cover four orders of magnitude in M{sub *} and SFR, and sample a wide range of morphologies from starbursting mergers to normal star-forming galaxies. We derive 3.0–3.5σ relations between outflow velocity and SFR, M{sub *}, and v{sub circ}. The outflow velocities scale as SFR{sup 0.08−0.22}, M{sub ∗}{sup 0.12−0.20} and v{sub circ}{sup 0.44−0.87}, with the range depending on whether we use a maximum or a central velocity to quantify the outflow velocity. After accounting for their increased SFR, mergers drive 32% faster outflows than non-merging galaxies, with all of the highest velocity outflows arising from mergers. Low-mass galaxies (log(M{sub *}/ M{sub ⊙}) < 10.5) lose some low-ionization gas through galactic outflows, while more massive galaxies retain all of their low-ionization gas, unless they undergo a merger.

79 ASTRONOMY AND ASTROPHYSICS↗

The Effect of Airborne Contaminants on Fuel Cell Performance and Durability

The impact of contaminants on fuel cell performance was examined to document air filter specifications (prevention) and devise recovery procedures (maintenance) that are effective at the system level. Eight previously undocumented airborne contaminants were selected for detailed studies and characterization data was used to identify operating conditions that intensifying contamination effects. The use of many and complementary electrochemical, chemical and physical characterization methods and the derivation of several mathematical models supported the formulation of contamination mechanisms and the development of recovery procedures. The complexity of these contamination mechanisms suggests a shift to prevention and generic maintenance measures. Only two of the selected contaminants led to cell voltage losses after injection was interrupted. Proposed recovery procedures for calcium ions, a component of road de-icers, dessicants, fertilizers and soil conditioners, were either ineffective or partly effective, whereas for bromomethane, a fumigant, the cell voltage was recovered to its initial value before contamination by manipulating and sequencing operating conditions. However, implementation for a fuel cell stack and system remains to be demonstrated. Contamination mechanisms also led to the identification of membrane durability stressors. All 8 selected contaminants promote the formation of hydrogen peroxide, a known agent that can produce radicals that attack the ionomer and membrane molecular structure whereas the dehydrating effect of calcium ions on the ionomer and membrane increases their brittleness and favors the creation of pinholes under mechanical stresses. Data related to acetylene, acetonitrile and calcium ions are emphasized in the report.

33 ADVANCED PROPULSION SYSTEMS↗

Computed Tomography Scanning and Geophysical Measurements of the Patterson #5-25 Well in Western Kansas

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the National Energy Technology Laboratory (NETL) site in Morgantown, West Virginia, were used to characterize core from the Patterson Field site. This core came from a vertical well (Patterson #5-25 well) that was obtained as part of the U.S. Department of Energy (DOE) sponsored Integrated Midcontinental Stacked Carbon Storage Hub. The primary impetus of this work is a collaboration between NETL and the Kansas Geological Survey to characterize core from the Patterson Field site. The 625 ft of whole core from the Atoka Formation to Precambrian Basement was characterized at NETL. As part of this effort, bulk scans of core were obtained. This report, and the associated scans, provide detailed datasets not typically made publicly available for carbon capture utilization and storage analysis. The resultant datasets are presented in this report and can be accessed from NETL's Energy Data eXchange (EDX) online system using the following link: https://edx.netl.doe.gov/dataset/patterson-5-25-well. All equipment and techniques used were non-destructive, enabling future examinations and analyses to be performed on these cores. None of the equipment used was suitable for direct visualization of the shale pore space, although fractures and discontinuities were detectable with the methods tested. Low resolution CT imagery with the NETL medical CT scanner was performed on the entire core. Qualitative analysis of the medical CT images, coupled with x-ray fluorescence (XRF), P-wave, and magnetic susceptibility measurements from the MSCL are useful in identifying zones of interest for more detailed analysis as well as fractured zones. The ability to quickly identify key areas for more detailed study with higher resolution will save time and resources in future studies. The combination of methods used provided a multi-scale analysis of this core and provided both a macro and micro description of the core that is relevant for many subsurface energy related examinations that have traditionally been performed at NETL.

58 GEOSCIENCES↗

Characterizing and Improving the Data Reduction Pipeline for the Keck OSIRIS Integral Field Spectrograph

OSIRIS is a near-infrared (1.0–2.4 μm) integral field spectrograph operating behind the adaptive optics system at Keck Observatory and one of the first lenslet-based integral field spectrographs. Since its commissioning in 2005, it has been a productive instrument, producing nearly half the laser guide star adaptive optics papers on Keck. The complexity of its raw data format necessitated a custom data reduction pipeline (DRP) delivered with the instrument in order to iteratively assign flux in overlapping spectra to the proper spatial and spectral locations in a data cube. Other than bug fixes and updates required for hardware upgrades, the bulk of the DRP has not been updated since initial instrument commissioning. We report on the first major comprehensive characterization of the DRP using on-sky and calibration data. We also detail improvements to the DRP, including characterization of the flux assignment algorithm, exploration of spatial rippling in the reduced data cubes, and improvements to several calibration files, including the rectification matrix, bad-pixel mask, and wavelength solution. We present lessons learned from over a decade of OSIRIS data reduction that are relevant to the next generation of integral field spectrograph hardware and data reduction software design.

79 ASTRONOMY AND ASTROPHYSICS↗

PLTTER user's guide

The PLTTER graphics system, which is part of CDDMS is discussed. CDDMS is a comprehensive system for data basing and subsequent plotting of data acquired during wind tunnel tests or from computational flow analyses. The PLTTER is a system which creates report-quality plots of data which is stored on a CDDMS data base. The Requests file system allows plot-controlling information to be arranged in the way which is most appropriate for any application. The PLTTER system features many capabilities which are especially useful when plotting wind tunnel data. The PLTTER offers a variety of page formats, different grid options and parametric curve fitting algorithms, and a powerful legend capability to identify relevant information about individual curves. One or more plots on a page can be suppressed if desired so that an established page format can be maintained. Final plot output may be standard Versatec plots, QMS Laser printer plots, or microfiche.

Barlow, A.↗

Emission-line galaxies in the third list of the Case Low-Dispersion Northern Sky Survey

Observations of 47 galaxies in the third Case list are reported. Thirty-five of the galaxies in the sample were selected for the presence of emission lines on the objective prism plates. At the higher spectral dispersion of the data, significant line emission was found in 46 of the 47 galaxies. Twenty-six galaxies are found to be undergoing significant bursts of star formation. Ten additional galaxies may be starburst galaxies with low-excitation spectra. Two galaxies are probably type Seyfert 2. The most distant object, CG 200, at a redshift of 0.144, has a strong broad H-alpha emission line, and is probably a Seyfert 1. Seventeen of the galaxies have been detected by IRAS. Eight of the IRAS galaxies have H-II-region-type spectra and eight have low-ionization starburst spectra. The galaxies represent a mixture of types, ranging from intrinsically faint dwarf galaxies with Mb equalling -16 mag, to powerful galaxies with MB equalling -23 mag. Galaxies CG 234 and CG 235 are interacting, as are galaxies CG 269 and CG 270.

Weistrop, Donna↗

Elastic plastic fracture mechanics methodology for surface cracks

The Elastic Plastic Fracture Mechanics Methodology has evolved significantly in the last several years. Nevertheless, some of these concepts need to be extended further before the whole methodology can be safely applied to structural parts. Specifically, there is a need to include the effect of constraint in the characterization of material resistance to crack growth and also to extend these methods to the case of 3D defects. As a consequence, this project was started as a 36 month research program with the general objective of developing an elastic plastic fracture mechanics methodology to assess the structural reliability of pressure vessels and other parts of interest to NASA which may contain flaws. The project is divided into three tasks that deal with (1) constraint and thickness effects, (2) three-dimensional cracks, and (3) the Leak-Before-Burst (LBB) criterion. This report period (March 1994 to August 1994) is a continuation of attempts to characterize three dimensional aspects of fracture present in 'two dimensional' or planar configuration specimens (Chapter Two), especially, the determination of, and use of, crack face separation data. Also, included, are a variety of fracture resistance testing results (J(m)R-curve format) and a discussion regarding two materials of NASA interest (6061-T651 Aluminum alloy and 1N718-STA1 nickel-base super alloy) involving a bases for like constraint in terms of ligament dimensions, and their comparison to the resulting J(m)R-curves (Chapter Two).

Ernst, Hugo A.↗

Digital communication constraints in prior space missions

Digital communication is crucial for space endeavors. Jt transmits scientific and command data between earth stations and the spacecraft crew. It facilitates communications between astronauts, and provides live coverage during all phases of the mission. Digital communications provide ground stations and spacecraft crew precise data on the spacecraft position throughout the entire mission. Lessons learned from prior space missions are valuable for our new lunar and Mars missions set by our president s speech. These data will save our agency time and money, and set course our current developing technologies. Limitations on digital communications equipment pertaining mass, volume, data rate, frequency, antenna type and size, modulation, format, and power in the passed space missions are of particular interest. This activity is in support of ongoing communication architectural studies pertaining to robotic and human lunar exploration. The design capabilities and functionalities will depend on the space and power allocated for digital communication equipment. My contribution will be gathering these data, write a report, and present it to Communications Technology Division Staff. Antenna design is very carefully studied for each mission scenario. Currently, Phased array antennas are being developed for the lunar mission. Phased array antennas use little power, and electronically steer a beam instead of DC motors. There are 615 patches in the phased array antenna. These patches have to be modified to have high yield. 50 patches were created for testing. My part is to assist in the characterization of these patch antennas, and determine whether or not certain modifications to quartz micro-strip patch radiators result in a significant yield to warrant proceeding with repairs to the prototype 19 GHz ferroelectric reflect-array antenna. This work requires learning how to calibrate an automatic network, and mounting and testing antennas in coaxial fixtures. The purpose of this activity is to assist in the set-up of phase noise instrumentation, assist in the process of automated wire bonding, assist in the design and optimization of tunable microwave components, especially phase shifters, based on thin ferroelectric films, and learn how to use commercial electromagnetic simulation software.

Yassine, Nathan K.↗