Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Titrating Controlled Defects into Si-LTA Zeolite Crystals Using Multiple Organic Structure-Directing Agents

Controlling defects in zeolites is crucial for tuning their adsorption and catalytic properties. In this work, we have performed an integrated zeolite synthesis, spectroscopy, and density functional theory study to test the limit of F– as a charge-balancing agent that mitigates defects in siliceous zeolites. We focused on the synthesis of siliceous zeolite LTA at 150 °C with 1,2-dimethyl-3-(4-methylbenzyl) imidazolium as the primary organic structure-directing agent (OSDA) and tetramethyl ammonium (TMA) as the secondary OSDA. By varying the amount of TMA in the synthesis gel, positive charges were titrated into the resulting as-made Si-LTA. Surprisingly, we found that greater TMA concentration does not induce more F– to enter into the zeolite. 29Si solid-state MAS NMR, Raman spectroscopy, and density functional theory suggest that this system has surpassed its capacity for F– to balance OSDA charge, and additional positive charge is balanced by Si–O– framework defects. The number of defects in the as-made Si-LTA can be precisely titrated by the amount of TMA in the zeolite structures. For the Si-LTA synthesized without TMA, framework defects formed in the early stage of crystal growth were found to heal during later crystallization, leading to defect-free Si-LTA. However, for the Si-LTA synthesized with TMA, the defects formed in early stages do not heal. A DFT thermodynamic analysis explains that crowding of Si-LTA pores by TMA impedes defect healing; this prediction is corroborated by synthesis experiments at an elevated temperature (170 °C). These results indicate that F– can have a limited capacity to balance OSDA charge in zeolite synthesis, opening up a third route to zeolite synthesis intermediate between the fluoride and hydroxide routes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Li{sub 2}PtH{sub 6} using high pressure: Completion of the homologous series A{sub 2}PtH{sub 6} (A=alkali metal)

Li{sub 2}PtH{sub 6}, the missing member of the complex transition metal hydride series A{sub 2}PtH{sub 6} (A=alkali metal), was prepared by reacting mixtures of LiH and Pt in the presence of BH{sub 3}NH{sub 3} as hydrogen source at pressures above 8 GPa. According to powder X-ray diffraction analysis, Li{sub 2}PtH{sub 6} is isostructural to its heavier homologues and crystallizes in the cubic K{sub 2}PtCl{sub 6} structure (space group Fm3-bar m, a=6.7681(3), Z=4). However, PtH{sub 6}{sup 2-} octahedral complexes in Li{sub 2}PtH{sub 6} approach each other closely and its structure may likewise be regarded as a defective perovskite structure where half of the octahedrally coordinated atoms (cations) are missing. The IR spectrum of Li{sub 2}PtH{sub 6} reveals the Pt-H T{sub 1u} stretch and bend at 1840 and 889 cm{sup -1}, respectively. - Graphical abstract: Li{sub 2}PtH{sub 6}, the missing start member of the complex metal hydride series A{sub 2}PtH{sub 6} (A=alkali metal) has been prepared by high pressure hydrogenation. In contrast to the heavier homologues, PtH{sub 6}{sup 2-} octahedral units in Li{sub 2}PtH{sub 6} are not well separated and H atoms form a substructure closely corresponding to that of O atoms in cubic perovskite.

36 MATERIALS SCIENCE↗

Lattice thermal conductivity of UO{sub 2} using ab-initio and classical molecular dynamics

We applied the non-equilibrium ab-initio molecular dynamics and predict the lattice thermal conductivity of the pristine uranium dioxide for up to 2000 K. We also use the equilibrium classical molecular dynamics and heat-current autocorrelation decay theory to decompose the lattice thermal conductivity into acoustic and optical components. The predicted optical phonon transport is temperature independent and small, while the acoustic component follows the Slack relation and is in good agreement with the limited single-crystal experimental results. Considering the phonon grain-boundary and pore scatterings, the effective lattice thermal conductivity is reduced, and we show it is in general agreement with the sintered-powder experimental results. The charge and photon thermal conductivities are also addressed, and we find small roles for electron, surface polaron, and photon in the defect-free structures and for temperatures below 1500 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced order–disorder transitions in β-In 2 S 3 : an experimental and theoretical study of structural and vibrational properties

We report this joint experimental and theoretical study of the structural and vibrational properties of β-In 2 S 3 upon compression shows that this tetragonal defect spinel undergoes two reversible pressure-induced order–disorder transitions up to 20 GPa. We propose that the first high-pressure phase above 5.0 GPa has the cubic defect spinel structure of α-In 2 S 3 and the second high-pressure phase ($\phi$-In 2 S 3 ) above 10.5 GPa has a defect α-NaFeO 2 -type (R$\bar{3}$) structure. This phase, related to the NaCl structure, has not been previously observed in spinels under compression and is related to both the tetradymite structure of topological insulators and to the defect LiTiO 2 phase observed at high pressure in other thiospinels. Structural characterization of the three phases shows that α-In 2 S 3 is softer than β-In 2 S 3 while $\phi$-In 2 S 3 is harder than β-In 2 S 3 . Vibrational characterization of the three phases is also provided, and their Raman-active modes are tentatively assigned. Our work shows that the metastable α phase of In 2 S 3 can be accessed not only by high temperature or varying composition, but also by high pressure. On top of that, the pressure-induced β–α–$\phi$ sequence of phase transitions evidences that β-In 2 S 3 , a B III 2 X V 3 compound with an intriguing structure typical of A II B III 2 X VI 4 compounds (intermediate between thiospinels and ordered-vacancy compounds) undergoes: (i) a first phase transition at ambient pressure to a disordered spinel-type structure (α-In 2 S 3 ), isostructural with those found at high pressure and high temperature in other B III 2 X V 3 compounds; and (ii) a second phase transition to the defect α-NaFeO 2 -type structure ($\phi$-In 2 S 3 ), a distorted NaCl-type structure that is related to the defect NaCl phase found at high pressure in A II B III 2 X VI 4 ordered-vacancy compounds and to the defect LiTiO 2 -type phase found at high pressure in A II B III 2 X VI 4 thiospinels. This result shows that In 2 S 3 (with its intrinsic vacancies) has a similar pressure behaviour to thiospinels and ordered-vacancy compounds of the A II B III 2 X VI 4 family, making β-In 2 S 3 the union link between such families of compounds and showing that group-13 thiospinels have more in common with ordered-vacancy compounds than with oxospinels and thiospinels with transition metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of defects on the photoluminescence kinetics in GaN/AlN quantum-dot structures

The influence of defects in the AlN barrier on photoluminescence decay after pulse excitation is studied for structures with GaN quantum dots in an AlN matrix. For these quantum-dot structures, it is found that the initial part of the decay curves corresponds to fast photoluminescence decay. Comparison of the photoluminescence-decay curves for the GaN/AlN quantum-dot structures and AlN layers without quantum dots shows that fast decay is defined by the contribution of the photoluminescence band related to defects in the AlN matrix.

36 MATERIALS SCIENCE↗

PROGRESS ON DEVELOPING SONIC INFRARED IMAGING FOR DEFECT DETECTION IN COMPOSITE STRUCTURES

At last year's QNDE conference, we presented our development of Sonic IR imaging technology in metal structures, with results from both experimental studies and theoretical computing. In the latest aircraft designs, such as the B787 from Boeing, composites have become the major materials in structures such as the fuselage and wings. This is in contrast to composites' use only in auxiliary components such as flaps and spoilers in the past. With today's advanced technology of fabrication, it is expected the new materials can be put in use in even more aircraft structures due to its light weight and high strength (high strength-to-weight ratio), high specific stiffness, tailorability of properties, design flexibility etc. Especially, with increases in fuel cost, reducing the aircraft's body weight becomes more and more appealing. In this presentation, we describe the progress on our development of Sonic IR imaging for aircraft composite structures. In particular, we describe the some unexpected results discovered while modeling delaminations. These results were later experimentally verified with an engineered delamination.

36 MATERIALS SCIENCE↗

The native point defects of ternary C14 Laves phase Mg{sub 2}Cu{sub 3}Si: Ab initio investigation

Nine possible native point defects in ternary C14 Laves phase Mg{sub 2}Cu{sub 3}Si are investigated from ab initio calculation based on density function theory. The two-dimensional phase diagram of chemical potentials is determined, and then defect formation energy is calculated. The energetic results show that Cu{sub Si} and Cu{sub Mg} are more favorable over a broad range of chemical potentials. The formation enthalpies for defective Mg{sub 2}Cu{sub 3}Si also demonstrate the same stability. Local distortions around point defects increase from Si{sub Cu} to Si{sub Mg}, showing that the polyhedral symmetry and coordination number for constituent atoms will affect the structure of defects. The electronic structure shows the strong (Cu, Si)–Si covalent bonding, also indicates that the Cu{sub Mg} is favorable because the weak Mg-Cu bonding is replaced by the strong Cu–Cu bonding, whereas Mg{sub Cu} and Mg{sub Si} are unfavorable because the strong Cu–Si bonding is replaced by the weak Mg–(Cu, Si) bonding. - Graphical abstract: Defects formation energy of τ phase as a function of the chemical potential over the stable scopes A-B-C-O-D-A. Display Omitted - Highlights: • The two-dimensional phase diagram of chemical potentials is determined. • The defect Cu{sub Si} and Cu{sub Mg} is more favorable than other defects in Mg{sub 2}Cu{sub 3}Si. • Local distortions from Cu{sub Si} to Mg{sub Si} are similar to the trend of energetic results. • The Mg{sub Cu} and Mg{sub Si} are unfavorable because Cu (Si)–Mg bonding is weaker than Cu-Si. • Mg{sub 2}Cu{sub 3}Si phase has the strong Cu-Si and Si-Si covalent character.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical defect modes in chiral liquid crystals

An analytic approach to the theory of optical defect modes in chiral liquid crystals (CLCs) is developed. The analytic study is facilitated by the choice of the problem parameters. Specifically, an isotropic layer (with the dielectric susceptibility equal to the average CLC dielectric susceptibility) sandwiched between two CLC layers is studied. The chosen model allows eliminating the polarization mixing and reducing the corresponding equations to the equations for light of diffracting polarization only. The dispersion equation relating the defect mode (DM) frequency to the isotropic layer thickness and an analytic expression for the field distribution in the DM structure are obtained and the corresponding dependences are plotted for some values of the DM structure parameters. Analytic expressions for the transmission and reflection coefficients of the DM structure (CLC-defect layer-CLC) are presented and analyzed for nonabsorbing, absorbing, and amplifying CLCs. The anomalously strong light absorption effect at the DM frequency is revealed. The limit case of infinitely thick CLC layers is considered in detail. It is shown that for distributed feedback lasing in a defect structure, adjusting the lasing frequency to the DM frequency results in a significant decrease in the lasing threshold. The DM dispersion equations are solved numerically for typical values of the relevant parameters. Our approach helps clarify the physics of the optical DMs in CLCs and completely agrees with the corresponding results of the previous numerical investigations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects in the crystal structure of Cd{sub x}Hg{sub 1-x}Te layers grown on the Si (310) substrates

Microstructure of the CdTe (310) and CdHgTe (310) layers grown by molecular-beam epitaxy on Si substrates has been studied by the methods of transmission electron microscopy and selective etching. It is established that formation of antiphase domains in the CdHgTe/CdTe/ZnTe/Si(310) is determined by the conditions of formation of the ZnTe/Si interface. Monodomain layers can be obtained by providing conditions that enhance zinc adsorption. An increase in the growth temperature and in the pressure of Te{sub 2} vapors gives rise to antiphase domains and induces an increase in their density to the extent of the growth of poly-crystals. It is found that stacking faults exist in a CdHgTe/Si(310) heterostructure; these defects are anisotropically distributed in the bulk of grown layers. The stacking faults are predominantly located in one (111) plane, which intersects the (310) surface at an angle of 68 Degree-Sign . The stacking faults originate at the ZnTe/Si(310) interface. The causes of origination of stacking faults and of their anisotropic distribution are discussed.

36 MATERIALS SCIENCE↗

Zirconate pyrochlores under high pressure

Ab initio total-energy calculations and x-ray diffraction measurements have been combined to study the phase stability of zirconate pyrochlores (A2Zr2O7; A=La, Nd and Sm) under pressures up to 50 GPa. Phase transformations to the defect-cotunnite structure are theoretically predicted at pressures of 22, 20 and 18 GPa, in excellent agreement with the experimentally determined values of 21, 22 and 18 GPa for La2Zr2O7, Nd2Zr2O7 and Sm2Zr2O7, respectively. Analysis of the elastic properties indicates that elastic anisotropy may be one of the driving forces for the pressure-induced cubic-to-noncubic phase transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multilevel probabilistic approach to evaluate manufacturing defect in composite aircraft structures

In this work it is developed a reliable approach and its feasibility to the design and analysis of a composite structures. The metric is compared the robustness and reliability designs versus the traditional design, to demonstrate the gain that can be achieved with a probabilistic approach. The use of the stochastic approach of the uncertain parameteters in combination with the multi-scale levels analysis is the main objective of this paper. The work is dedicated to analyze the uncertainties in the design, tests, manufacturing process, and key gates such as materials characteristic.

36 MATERIALS SCIENCE↗

Point defects as a test ground for the local density approximation +U theory: Mn, Fe, and V{sub Ga} in GaN

Electronic structure of the Mn and Fe ions and of the gallium vacancy V{sub Ga} in GaN was analysed within the GGA + U approach. First, the +U term was treated as a free parameter, and applied to p(N), d(Mn), and d(Fe). The band gap of GaN is reproduced for U(N) ≈ 4 eV. The electronic structure of defect states was found to be more sensitive to the value of U than that of the bulk states. Both the magnitude and the sign of the U-induced energy shifts of levels depend on occupancies, and thus on the defect charge state. The energy shifts also depend on the hybridization between defect and host states, and thus are different for different level symmetries. In the case of V{sub Ga}, these effects lead to stabilization of spin polarization and the “negative-U{sub eff}” behavior. The values of Us were also calculated using the linear response approach, which gives U(Fe) ≈ U(Mn) ≈ 4 eV. This reproduces well the results of previous hybrid functionals calculations. However, the best agreement with the experimental data is obtained for vanishing or even negative U(Fe) and U(Mn)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defects in Arsenic Implanted р{sup +}–n- and n{sup +}–p- Structures Based on MBE Grown CdHgTe Films

Complex studies of the defect structure of arsenic-implanted (with the energy of 190 keV) Cd{sub x}Hg{sub 1–x}Te (x = 0.22) films grown by molecular-beam epitaxy are carried out. The investigations were performed using secondary-ion mass spectroscopy, transmission electron microscopy, optical reflection in the visible region of the spectrum, and electrical measurements. Radiation donor defects were studied in n{sup +}–p- and n{sup +}–n-structures obtained by implantation and formed on the basis of p-type and n-type materials, respectively, without activation annealing. It is shown that in the layer of the distribution of implanted ions, a layer of large extended defects with low density is formed in the near-surface region followed by a layer of smaller extended defects with larger density. A different character of accumulation of electrically active donor defects in the films with and without a protective graded-gap surface layer has been revealed. It is demonstrated that p{sup +}–n- structures are formed on the basis of n-type material upon activation of arsenic in the process of postimplantation thermal annealing with 100% activation of impurity and complete annihilation of radiation donor defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structures and localized vibrational states of defects in graphite by tight-binding calculations

The structural and vibrational properties of pristine graphite and point defects in graphite are studied by tight-binding (TB) calculations using a three-center TB potential model. We showed that the three-center TB potential without ‘‘ad hoc’’ van der Waals interaction corrections can accurately describe the inter-layer distance of graphite and the lowest-energy structures and stabilities of typical point defects in graphite. The results from our TB calculations are in good agreement with those from density-functional theory calculations with van der Waals interaction corrections. We also investigated the vibrational properties to gain better understanding on the localization of vibrational states induced by the point defects. Our calculation results show that although localized or quasi-localized vibrational modes can be found in all defected graphite, the localization induced by Frenkel pair, dual-vacancy, and dual-interstitial defects is much stronger. Atomic displacements associated with the localized vibrational modes induced by these three point defects are also analyzed

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗