Search NASA⌕ Search

SEARCH · Search NASA

Results for “deterministic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Revisiting ENSO/Indian Ocean Dipole phase relationships

Here in this paper we show that the characteristics of the Indian Ocean Dipole (IOD), such as its power spectrum and phase relationship with the El Niño–Southern Oscillation (ENSO), can be succinctly explained by ENSO combination mode (C-mode) wind and heat flux forcing together with a seasonal modulation of the air/sea coupled Indian Ocean (IO) Bjerknes feedback. This model explains the observed high-frequency near-annual IOD variability in terms of deterministic ENSO/annual cycle interactions. ENSO-independent IOD events can be understood as a seasonally modulated ocean response to white noise atmospheric forcing. Under this new physical null hypothesis framework, IOD predictability is determined by both ENSO predictability and the ENSO signal-to-noise ratio. We further emphasize that lead/lag correlations between different climate variables are easily misinterpreted when not accounting properly for the seasonal modulation of the underlying climate phenomena.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Global climate impacts of stochastic deep convection parameterization in the NCAR CAM5

In this paper, the stochastic deep convection parameterization of Plant and Craig (PC) is implemented in the Community Atmospheric Model version 5 (CAM5) to incorporate the stochastic processes of convection into the Zhang-McFarlane (ZM) deterministic deep convective scheme. Its impacts on deep convection, shallow convection, large-scale precipitation and associated dynamic and thermodynamic fields are investigated. Results show that with the introduction of the PC stochastic parameterization, deep convection is decreased while shallow convection is enhanced. The decrease in deep convection is mainly caused by the stochastic process and the spatial averaging of input quantities for the PC scheme. More detrained liquid water associated with more shallow convection leads to significant increase in liquid water and ice water paths, which increases large-scale precipitation in tropical regions. Specific humidity, relative humidity, zonal wind in the tropics, and precipitable water are all improved. The simulation of shortwave cloud forcing (SWCF) is also improved. The PC stochastic parameterization decreases the global mean SWCF from -52.25 W/m 2 in the standard CAM5 to -48.86 W/m 2 , close to -47.16 W/m 2 in observations. The improvement in SWCF over the tropics is due to decreased low cloud fraction simulated by the stochastic scheme. Sensitivity tests of tuning parameters are also performed to investigate the sensitivity of simulated climatology to uncertain parameters in the stochastic deep convection scheme.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Broadband (0–4 Hz) Ground Motions for a Magnitude 7.0 Hayward Fault Earthquake With Three‐Dimensional Structure and Topography

Abstract We performed fully deterministic broadband (0–4 Hz) high‐performance computing ground motion simulations of a magnitude 7.0 scenario earthquake on the Hayward Fault (HF) in the San Francisco Bay Area of Northern California. Simulations consider average one‐dimensional (1‐D) and three‐dimensional (3‐D) anelastic structure with flat and topographic free surfaces. Ground motion intensity measures (GMIMs) for the 3‐D model display dramatic differences across the HF due to geologic heterogeneity, with low wave speeds east of the HF amplifying motions. The median GMIMs agree well with Ground Motion Prediction Equations (GMPEs); however, the 3‐D model generates more scatter than the 1‐D model. Ratios of 3‐D/1‐D GMIMs from the same source allow isolation of path and site effects for the 3‐D model. These ratios show remarkably similar trends as site‐specific factors for the GMPE predictions, suggesting that wave propagation effects in our 3‐D simulations are on average consistent with empirical data.

58 GEOSCIENCES↗
DOE OSTI2017

Simulation of Precipitation Extremes Using a Stochastic Convective Parameterization in the NCAR CAM5 Under Different Resolutions

With the incorporation of the Plant-Craig stochastic deep convection scheme into the Zhang-McFarlane deterministic parameterization in the Community Atmospheric Model version 5 (CAM5), its impact on extreme precipitation at different resolutions (2°, 1°, and 0.5°) is investigated. CAM5 with the stochastic deep convection scheme (experiment (EXP)) simulates the precipitation extreme indices better than the standard version (control). At 2° and 1° resolutions, EXP increases high percentile (>99th) daily precipitation over the United States, Europe, and China, resulting in a better agreement with observations. However, at 0.5° resolution, due to enhanced grid-scale precipitation with increasing resolution, EXP overestimates extreme precipitation over southeastern U.S. and eastern Europe. The reduced biases in EXP at each resolution benefit from a broader probability distribution function of convective precipitation intensity simulated. Among EXP simulations at different resolutions, if the spatial averaging area over which input quantities used in convective closure are spatially averaged in the stochastic convection scheme is comparable, the modeled convective precipitation intensity decreases with increasing resolution, when gridded to the same resolution, while the total precipitation is not sensitive to model resolution, exhibiting some degree of scale-awareness. Sensitivity tests show that for the same resolution, increasing the size of spatial averaging area decreases convective precipitation but increases the grid-scale precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Impact of Three-Phase Relative Permeability and Hysteresis Models on Forecasts of Storage Associated With CO 2 -EOR

Geological CO 2 sequestration in conjunction with enhanced oil recovery (CO 2 -EOR) includes complex multiphase flow processes compared to CO 2 storage in deep saline aquifers. Two of the most critical factors affecting multiphase flow in CO 2 -EOR are three-phase relative permeability and associated hysteresis, both of which are difficult to measure and are usually represented by numerical interpolation models. The purpose of this research is to improve understanding of (1) the relative impacts of different three-phase relative permeability models and hysteresis models on CO 2 trapping mechanisms, and (2) uncertainty associated with these two factors. Four different three-phase relative permeability models and three hysteresis models were applied to simulations of an active CO 2 -EOR site, the SACROC unit located in western Texas. To eliminate potential bias of deterministic parameters, we utilized a sequential Gaussian simulation technique to generate 50 realizations to describe heterogeneity of porosity and permeability, based on data obtained from well logs and seismic survey. Simulation results of forecasted CO 2 storage suggested that (1) the choice of three-phase relative permeability model and hysteresis model led to noticeable impacts on forecasted CO 2 sequestration capacity; (2) impacts of three-phase relative permeability models and hysteresis models on CO 2 trapping are small during the CO 2 -EOR injection period, and increase during the post-EOR CO 2 injection period; (3) the specific choice of hysteresis model is more important relative to the choice of three-phase relative permeability model; and (4) using the recommended three-phase WAG (Water-Alternating-Gas) hysteresis model may increase the impact of three-phase relative permeability models and uncertainty due to heterogeneity.

42 ENGINEERING↗
DOE OSTI2023

Predicting Deposition Rate and Closing the Loop on Aerosol Jet Printing with In‐Line Light Scattering Measurements

Aerosol jet printing is a compelling noncontact, digital manufacturing technology for flexible, hybrid, and conformal electronics, but batch‐to‐batch variability and process drift inhibit systematic study and translation to production environments. Emerging measurement techniques for the aerosol volume fraction, a key parameter governing deposition rate, have shown promise for real‐time response, including a recent demonstration of human‐in‐the‐loop control. By integrating improved light scattering measurements with custom software, a robust environment for real‐time monitoring is established and fully automated closed‐loop control over the deposition rate during printing is enabled. The physical basis for scattering measurements as a feedback source is examined and the quantitative insight this provides for ink development and fundamental process studies is highlighted. Three candidate process variables for closed‐loop control, namely the atomizer voltage, carrier gas flow rate, and print speed, are then evaluated. The atomizer voltage demonstrates the best extended duration validity because it addresses atomization variability directly, but carrier gas flow rate and print speed provide faster and more deterministic responses. This methodology is then demonstrated for electrical properties using a silver nanoparticle ink, maintaining 98% of printed patterns within 10% of the mean resistance value over 3 h of printing.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Controlled Mechanical Buckling for Origami-Inspired Construction of 3D Microstructures in Advanced Materials

Origami is a topic of rapidly growing interest in both the scientific and engineering research communities due to its promising potential in a broad range of applications. Previous assembly approaches of origami structures at the micro/nanoscale are constrained by the applicable classes of materials, topologies and/or capability of control over the transformation. In this work, we introduce an approach that exploits controlled mechanical buckling for autonomic origami assembly of 3D structures across material classes from soft polymers to brittle inorganic semiconductors, and length scales from nanometers to centimeters. This approach relies on a spatial variation of thickness in the initial 2D structures as an effective strategy to produce engineered folding creases during the compressive buckling process. The elastic nature of the assembly scheme enables active, deterministic control over intermediate states in the 2D to 3D transformation in a continuous and reversible manner. Demonstrations include a broad set of 3D structures formed through unidirectional, bidirectional, and even hierarchical folding, with examples ranging from half cylindrical columns and fish scales, to cubic boxes, pyramids, starfish, paper fans, skew tooth structures, and to amusing system-level examples of soccer balls, model houses, cars, and multifloor textured buildings.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Direct Laser Writing of Low-Density Interdigitated Foams for Plasma Drive Shaping [Direct Laser Writing of Low Density Nanostitched Foams for Plasma Drive Shaping]

Monolithic porous bulk materials have many promising applications ranging from energy storage and catalysis to high energy density physics. High resolution additive manufacturing techniques, such as direct laser writing via two photon polymerization (DLW-TPP), now enable the fabrication of highly porous microlattices with deterministic morphology control. In this work, DLW-TPP is used to print millimeter-sized foam reservoirs (down to 0.06 g cm –3 ) with tailored density-gradient profiles, where density is varied by over an order of magnitude (for instance from 0.6 to 0.06 g cm –3 ) along a length of <100 µm. Taking full advantage of this technology, however, is a multiscale materials design problem that requires detailed understanding of how the different length scales, from the molecular level to the macroscopic dimensions, affect each other. The design of these 3D-printed foams is based on the brickwork arrangement of 100 × 100 × 16 µm 3 log-pile blocks constructed from sub-micrometer scale features. A block-to-block interdigitated stitching strategy is introduced for obtaining high density uniformity at all length scales. Lastly, these materials are used to shape plasma-piston drives during ramp-compression of targets under high energy density conditions created at the OMEGA Laser Facility.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Atom–by–Atom Fabrication of Single and Few Dopant Quantum Devices

Atomically precise fabrication has an important role to play in developing atom-based electronic devices for use in quantum information processing, quantum materials research, and quantum sensing. Atom-by-atom fabrication has the potential to enable precise control over tunnel coupling, exchange coupling, on-site charging energies, and other key properties of basic devices needed for solid-state quantum computing and analog quantum simulation. Using hydrogen-based scanning probe lithography, individual dopant atoms are deterministically placed relative to atomically aligned contacts and gates to build single electron transistors, single atom transistors, and gate-controlled quantum sensing devices. Here, the key steps required to fabricate and demonstrate the essential building blocks needed for spin selective initialization/readout and coherent quantum manipulation are described.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Rare-Earth Permanent Magnet SmCo 5 for Chiral Interfacial Spin-Orbitronics

Interfacially asymmetric magnetic multilayers made of heavy metal/ferromagnet have attracted considerable attention in the spintronics community for accommodating spin-orbit torques (SOTs) and meanwhile for hosting chiral spin textures. In these multilayers, the accompanied interfacial Dzyaloshinskii–Moriya interaction (iDMI) permits the formation of Néel-type spin textures. While significant progresses have been made in Co, CoFeB, Co 2 FeAl, CoFeGd based multilayers, it would be intriguing to identify new magnetic multilayers that could enable spin-torque controllability and meanwhile host nanoscale skyrmions. In this report, first, thin films made of permanent magnet SmCo 5 with perpendicular magnetic anisotropy are synthesized, in which the deterministic SOT switching, enabled by the spin Hall effect, in Pt/SmCo 5 /Ta trilayer is demonstrated. Further, the stabilization of room-temperature skyrmions with diameters ≈100 nm in [Pt/SmCo 5 /Ta] 15 , together with a skyrmionium-like spin texture in [Pt/SmCo 5 /Ir] 15 multilayers is shown. Based on the material specific parameters, micromagnetic simulations are also carried out. The results confirm the presence of chiral spin textures in this new material family. Through interfacial engineering, the results thus demonstrate that rare earth permanent magnets could be a new platform for studying interfacial chiral spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Ionic‐Liquid‐Gating‐Induced Hydrogenation in Epitaxial Strontium Ferrite

Abstract Incorporating hydrogen into complex oxides holds promise for discovering exotic phenomena and novel functionalities by promoting couplings between ion and lattice/charge/spin/orbital degrees of freedom. Here, electrolyte gating‐driven hydrogenation is investigated in epitaxial brownmillerite SrFeO 2.5 thin films in which the hydrogenation‐induced lattice distortion is qualitatively different from its counterpart SrCoO 2.5 . The achievable lattice expansion in hydrogenated SrFeO 2.5 is weaker than in SrCoO 2.5 and primarily occurs along the normal of the stacked octahedral FeO 6 and tetrahedral FeO 4 layers. Upon the substitution of Fe with Co, the lattice expansion monotonically increases with increase of Co/Fe ratio, implying an intrinsic difference in accommodating hydrogen between Fe‐ and Co‐based brownmillerites. Moreover, a net magnetic moment in hydrogenated SrFeO 2.5 films is observed above room temperature, which gradually weakens with the increase of Co substitution, suggesting a stronger canted magnetism in Fe‐based hydrogenated brownmillerites. This work clarifies the electrolyte gating‐driven hydrogenation mechanisms in brownmillerite SrFeO 2.5 epitaxial thin films and those with Co substitution, particularly the deterministic role of Co/Fe ratio in the evolution of structure and properties upon hydrogenation.

Chemistry↗
DOE OSTI2025

Magnetic Switching in Monolayer 2D Diluted Magnetic Semiconductors via Spin‐to‐Spin Conversion

Abstract The integration of 2D van der Waals (vdW) magnets with topological insulators or heavy metals holds great potential for realizing next‐generation spintronic memory devices. However, achieving high‐efficiency spin–orbit torque (SOT) switching of monolayer vdW magnets at room temperature poses a significant challenge, particularly without an external magnetic field. Here, it is shown field‐free, deterministic, and nonvolatile SOT switching of perpendicular magnetization in the monolayer, diluted magnetic semiconductor (DMS), Fe‐doped MoS 2 (Fe:MoS 2 ) at up to 380 K with a current density of ≈7 × 10 4 A cm −2 . The in situ doping of Fe into monolayer MoS 2 via chemical vapor deposition and the geometry‐induced strain in the crystal break the rotational switching symmetry in Fe:MoS 2 , promoting field‐free SOT switching by generating out‐of‐plane spins via spin‐to‐spin conversion. An apparent anomalous Hall effect (AHE) loop shift at a zero in‐plane magnetic field verifies the existence of z spins in Fe:MoS 2 , inducing an antidamping‐like torque that facilitates field‐free SOT switching. This field‐free SOT application using a 2D ferromagnetic monolayer provides a new pathway for developing highly power‐efficient spintronic memory devices.

Chen, Siwei [Department of Mechanical Engineering ↗
DOE OSTI2017

Three-State Ferroelastic Switching and Large Electromechanical Responses in PbTiO 3 Thin Films

Leveraging competition between energetically degenerate states to achieve large field-driven responses is a hallmark of functional materials, but routes to such competition are limited. Here, a new route to such effects involving domain-structure competition is demonstrated, which arises from straininduced spontaneous partitioning of PbTiO 3 thin films into nearly energetically degenerate, hierarchical domain architectures of coexisting c/a and a 1 /a 2 domain structures. Using band-excitation piezoresponse force microscopy, this study manipulates and acoustically detects a facile interconversion of different ferroelastic variants via a two-step, three-state ferroelastic switching process (out-of-plane polarized c+ → in-plane polarized a → out-of-plane polarized c- state), which is concomitant with large nonvolatile electromechanical strains (≈1.25%) and tunability of the local piezoresponse and elastic modulus (>23%). It is further demonstrated that deterministic, nonvolatile writing/erasure of large-area patterns of this electromechanical response is possible, thus showing a new pathway to improved function and properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Beyond Substrates: Strain Engineering of Ferroelectric Membranes

Strain engineering in perovskite oxides provides for dramatic control over material structure, phase, and properties, but is restricted by the discrete strain states produced by available high-quality substrates. Here, using the ferroelectric BaTiO3, production of precisely strain-engineered, substrate-released nanoscale membranes is demonstrated via an epitaxial lift-off process that allows the high crystalline quality of films grown on substrates to be replicated. In turn, fine structural tuning is achieved using interlayer stress in symmetric trilayer oxide-metal/ferroelectric/oxide-metal structures fabricated from the released membranes. Additionally, in devices integrated on silicon, the interlayer stress provides deterministic control of ordering temperature (from 75 to 425 °C) and releasing the substrate clamping is shown to dramatically impact ferroelectric switching and domain dynamics (including reducing coercive fields to <10 kV cm-1 and improving switching times to <5 ns for a 20 µm diameter capacitor in a 100-nm-thick film). In devices integrated on flexible polymers, enhanced room-temperature dielectric permittivity with large mechanical tunability (a 90% change upon ±0.1% strain application) is demonstrated. This approach paves the way toward the fabrication of ultrafast CMOS-compatible ferroelectric memories and ultrasensitive flexible nanosensor devices, and it may also be leveraged for the stabilization of novel phases and functionalities not achievable via direct epitaxial growth.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantum Sensing and Imaging of Spin–Orbit-Torque-Driven Spin Dynamics in the Non-Collinear Antiferromagnet Mn 3 Sn

Novel non-collinear antiferromagnets with spontaneous time-reversal symmetry breaking, non-trivial band topology, and unconventional transport properties have received immense research interest over the past decade due to their rich physics and enormous promise in technological applications. One of the central focuses in this emerging field is exploring the relationship between the microscopic magnetic structure and exotic material properties. Nanoscale imaging of both spin–orbit-torque-induced deterministic magnetic switching and chiral spin rotation in non-collinear antiferromagnet Mn 3 Sn films using nitrogen-vacancy (NV) centers are reported. Direct evidence of the off-resonance dipole–dipole coupling between the spin dynamics in Mn 3 Sn and proximate NV centers is also demonstrated by NV relaxometry measurements. These results demonstrate the unique capabilities of NV centers in accessing the local information of the magnetic order and dynamics in these emergent quantum materials and suggest new opportunities for investigating the interplay between topology and magnetism in a broad range of topological magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strain‐Driven Mixed‐Phase Domain Architectures and Topological Transitions in Pb 1− x Sr x TiO 3 Thin Films

Abstract The potential for creating hierarchical domain structures, or mixtures of energetically degenerate phases with distinct patterns that can be modified continually, in ferroelectric thin films offers a pathway to control their mesoscale structure beyond lattice‐mismatch strain with a substrate. Here, it is demonstrated that varying the strontium content provides deterministic strain‐driven control of hierarchical domain structures in Pb 1− x Sr x TiO 3 solid‐solution thin films wherein two types, c / a and a 1 / a 2 , of nanodomains can coexist. Combining phase‐field simulations, epitaxial thin‐film growth, detailed structural, domain, and physical‐property characterization, it is observed that the system undergoes a gradual transformation (with increasing strontium content) from droplet‐like a 1 / a 2 domains in a c / a domain matrix, to a connected‐labyrinth geometry of c / a domains, to a disconnected labyrinth structure of the same, and, finally, to droplet‐like c / a domains in an a 1 / a 2 domain matrix. A relationship between the different mixed‐phase modulation patterns and its topological nature is established. Annealing the connected‐labyrinth structure leads to domain coarsening forming distinctive regions of parallel c / a and a 1 / a 2 domain stripes, offering additional design flexibility. Finally, it is found that the connected‐labyrinth domain patterns exhibit the highest dielectric permittivity.

Kavle, Pravin↗