Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Multiscale analysis of nanoindentation-induced defect structures in gum metal

Using ex-situ transmission electron microscopy and the recently developed nanoprobe diffraction (NPD) technique, we characterize a nanoindented solution treated gum metal. Lattice rotations are resolved at a 1.2 nm length-scale and shown to be continuous within the nanoindentation pit; further, it is revealed that these can be accommodated by a reasonable number of geometrically necessary dislocations at a density of ~10 15 /m 2 . We furthermore provide direct evidence that dislocations within the nanoindent, rather than secondary phase nanoparticles, can serve as potent barriers to dislocation motion. We also demonstrate that plasticity in these alloys under nanoindentation can be accommodated solely by dislocation nucleation and propagation, with no competing deformation mechanisms present. Conventional transmission electron microscopy and “ g•b ” analysis reveal the presence of dislocations on &lang;$ \bar{1}11 $&rang;{110} slip systems and highly localized plastic deformation in the form of shear bands on <111>{$ \bar{1} \bar{1}2 $} slip systems, similar to previously observed “giant faults”.

36 MATERIALS SCIENCE↗

Comment on 'Increase in specific heat and possible hindered rotation of interstitial C{sub 2} molecules in neutron-irradiated graphite'

Iwata and Watanabe's model for the observed low-temperature specific heat of neutron-irradiated graphite [T. Iwata and M. Watanabe, Phys. Rev. B 81, 014105 (2010)] assumes that self-interstitial atoms exist as clusters of nearly free C{sub 2} molecules. We suggest that their hypothesis is not supported by other experiments and theory, including our own calculations. Not only is it inconsistent with the long-known kinetics of interstitial prismatic dislocation loop formation, density-functional theory shows that the di-interstitial is covalently bonded to the host crystal. In such calculations no prior assumptions are made about the nature of the bonding, covalent or otherwise.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of dislocation channel width evolution in irradiated metals

Defect-free dislocation channel formation has been reported to promote plastic instability during tensile testing via localized plastic flow, leading to a distinct loss of ductility and strain hardening in many low-temperature irradiated materials. In order to study the underlying mechanisms governing dislocation channel width and formation, the channel formation process is modeled via a simple stochastic dislocation-jog process dependent upon grain size, defect cluster density, and defect size. Dislocations traverse a field of defect clusters and jog stochastically upon defect interaction, forming channels of low defect-density. And based upon prior molecular dynamics (MD) simulations and in-situ experimental transmission electron microscopy (TEM) observations, each dislocation encounter with a dislocation loop or stacking fault tetrahedron (SFT) is assumed to cause complete absorption of the defect cluster, prompting the dislocation to jog up or down by a distance equal to half the defect cluster diameter. Channels are predicted to form rapidly and are comparable to reported TEM measurements for many materials. Predicted channel widths are found to be most strongly dependent on mean defect size and correlated well with a power law dependence on defect diameter and density, and distance from the dislocation source. Due to the dependence of modeled channel width on defect diameter and density, maximum channel width is predicted to slowly increase as accumulated dose increases. The relatively weak predicted dependence of channel formation width with distance, in accordance with a diffusion analogy, implies that after only a few microns from the source, most channels observed via TEM analyses may not appear to vary with distance because of limitations in the field-of-view to a few microns. Furthermore, examinations of the effect of the so-called “source-broadening” mechanism of channel formation showed that its effect is simply to add a minimum thickness to the channel without affecting channel dependence on the given parameters.

36 MATERIALS SCIENCE↗

Web Growth Used to Confine Screw Dislocations to Predetermined Lateral Positions in 4H-SiC Epilayers

Silicon-carbide- (SiC-) based power devices could enable substantial aerospace electronics benefits over today's silicon-based electronics. However, present-day SiC wafers contain electrically harmful dislocations (including micropipes) that are unpredictably distributed in high densities across all commercial 4H- and 6H-SiC wafers. The NASA Glenn Research Center recently demonstrated a crystal growth process that moves SiC wafer dislocations to predetermined lateral positions in epitaxial layers so that they can be reproducibly avoided during subsequent SiC electronic device fabrication. The process starts by reactive ion etching mesa patterns with enclosed trench regions into commercial on-axis (0001) 4H- or 6H-SiC substrates. An example of a pregrowth mesa geometry with six enclosed triangular-shaped trench regions is shown. After the etch mask is stripped, homoepitaxial growth is carried out in pure stepflow conditions that enable thin cantilevers to grow laterally from the tops of mesas whose pregrowth top surfaces are not threaded by substrate screw dislocations. The image in the bottom figure shows the postgrowth structure that forms after the lateral cantilevers expand to coalesce and completely roof over each of the six triangular trench regions. Atomic force microscope (AFM) measurements of the roof revealed that three elementary screw dislocation growth spirals, each shown in the AFM insets of the bottom image on the previous page, formed in the film roof at three respective points of cantilever film coalescence. The image above shows the structure following an etch in molten potassium hydroxide (KOH) that produced surface etch pits at the dislocation defects. The larger KOH etch pits--S1, S2, and S3--shown in this image correspond to screw dislocations relocated to the final points of cantilever coalescence. The smaller KOH etch pits are consistent with epilayer threading edge dislocations from the pregrowth substrate mesa (P1, P3, and P4) and a final cantilever coalescence point (P2). No defects (i.e., no etch pits) are observed in other cantilevered portions of the film surface. On the basis of the principle of dislocation Burgers vector conservation, we hypothesize that all vertically propagating substrate dislocations in an enclosed trench region become combined into a single dislocation in the webbed film roof at the point of final roof coalescence. The point of final roof coalescence, and therefore the lateral location of a webbed roof dislocation, can be designed into the pregrowth mesa pattern. Screw dislocations with predetermined lateral positions can then be used to provide the new growth steps necessary for growing a 4H/6H-SiC epilayer with a lower dislocation density than the substrate. Devices fabricated on top of such films can be positioned to avoid the preplaced dislocations.

Powell, J. Anthony↗

High-purity silicon crystal growth investigations

Information is given on evaporation and segregation contributions to impurity profiles of floating zone crystals (FZ); high-purity silicon float zoning (FZ); minority-carrier lifetime measurement of heavily doped silicon crystals; the effect of some crystal growth parameters on minority-carrier lifetime; and defect investigations by X-ray topography in graphical and tabular form. It was concluded that evaporation contributes substantially to impurity reduction when FZ or cold-crucible growth is conducted in a vacuum; boron and gallium may be more favorable dopants than indium or aluminum for obtaining high minority-carrier lifetimes; minority-carrier lifetimes greater than 100 microseconds are feasible at a 2 times 10 to the 17th power cm-3 doping level; minority-carrier lifetime decreases with increasing crystal cooling rate and also with the presence of dislocations; the method used to clean silicon feed rods affects lifetime; and microdefect densities in dislocation-free FZ crystals appear to be lower with Ga doping than with B doping.

Ciszek, T. F.↗

The Effect of the Method by Which a High-Resistivity GaN Buffer Layer Is Formed on Properties of InAlN/GaN and AlGaN/GaN Heterostructures with 2D Electron Gas

AlGaN/AlN/GaN and InAlN/AlN/GaN structures with 2D electron gas have been grown on sapphire substrates by metal-organic vapor-phase epitaxy. The suppression of the parasitic conductivity of buffer GaN layers was provided either by intentionally raising the density of edge dislocations or by doping with iron (GaN:Fe). It was shown that using GaN buffer layers with a better crystal perfection and more planar surface results in the electron mobility in the 2D channel for carriers becoming 1.2–1.5 times higher.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial characterization of Al-Al thermocompression bonds

Interfaces formed by Al-Al thermocompression bonding were studied by the transmission electron microscopy. Si wafer pairs having patterned bonding frames were bonded using Al films deposited on Si or SiO{sub 2} as intermediate bonding media. A bond force of 36 or 60 kN at bonding temperatures ranging from 400–550 °C was applied for a duration of 60 min. Differences in the bonded interfaces of 200 μm wide sealing frames were investigated. It was observed that the interface had voids for bonding with 36 kN at 400 °C for Al deposited both on Si and on SiO{sub 2}. However, the dicing yield was 33% for Al on Si and 98% for Al on SiO{sub 2}, attesting for the higher quality of the latter bonds. Both a bond force of 60 kN applied at 400 °C and a bond force of 36 kN applied at 550 °C resulted in completely bonded frames with dicing yields of, respectively, 100% and 96%. A high density of long dislocations in the Al grains was observed for the 60 kN case, while the higher temperature resulted in grain boundary rotation away from the original Al-Al interface towards more stable configurations. Possible bonding mechanisms and reasons for the large difference in bonding quality of the Al films deposited on Si or SiO{sub 2} are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation of metastable SiGe/Si: Investigation with two complementary X-ray techniques

Metastable and strain relaxed SiGe layers with about 20% Ge content have been grown by molecular beam epitaxy on Si substrates at 550 deg. C. The thickness regime of metastability and the onset of strain relaxation were investigated on dust particle free surfaces obtained by careful chemical cleaning and epitaxy loading under clean room conditions. Compared to earlier results true metastable regime without misfit dislocations was obtained up to 140 nm thickness. The onset of strain relaxation started with heterogeneous nucleation sites of misfit dislocations. X-ray topography proved to be a unique monitoring tool to observe a low density of single dislocations. From these results we suggested to define a critical thickness band with lower bound t{sub cl} from dislocation nucleation to an upper bound t{sub co} (600 nm in our case) defined by the onset of considerable strain relaxation. The strain relief was measured by X-ray diffraction (reciprocal space mapping) and found to be very abrupt (76% strain relaxation at 800 nm thickness).

36 MATERIALS SCIENCE↗

In-situ TEM observation of dislocation evolution in Kr-irradiated UO2 single crystal

In-situ transmission electron microscopy (TEM) observation of UO2 single crystal irradiated with Kr ions at high temperatures was conducted to understand the dislocation evolution due to high-energy radiation. The dislocation evolution in UO2 single crystal is shown to occur as nucleation and growth of dislocation loops at low-irradiation doses, followed by transformation to extended dislocation segments and networks at high doses, as well as shrinkage and annihilation of some loops and dislocations due to high temperature annealing. Generally the trends of dislocation evolution in UO2 are similar under Kr irradiation at different ion energies and temperatures (150 keV at 600 degrees C and 1 MeV at 800 degrees C) used in this work, although the specific dislocation loop size and density are quite different. Interstitial-type dislocation loops with Burgers vector along <110> were observed in the Kr-irradiated UO2.The irradiated specimens were denuded of dislocation loops near the surface.

36 MATERIALS SCIENCE↗

Three-dimensional photoluminescence imaging of threading dislocations in GaN by sub-band optical excitation

GaN is rapidly gaining attention for implementation in power electronics but is still impacted by its high density of threading dislocations (TDs), which have been shown to facilitate current leakage through devices limiting their performance and reliability. Here, we discuss a novel implementation of photoluminescence (PL) imaging to study TDs in regions within vertically structured p-i-n GaN (PIN) diodes consisting of metalorganic chemical vapor deposition (MOCVD) epitaxial layers grown on ammonothermal GaN (am-GaN) substrates. PL imaging with a sub-bandgap excitation energy (3.1 eV) reveals TDs with excellent clarity in three dimensions within the am-GaN substrate. Galvanometric-driven PL imaging allows the microstructure of hundreds of devices to be characterized in a single session, enhancing the screening process through the addition of device specific TD location tracking and density mapping. The visibility, structural characteristics, luminescent nature and evolution of TDs through the GaN growth process are described, potentially providing the ability to define TD structures associated with leakage current.

36 MATERIALS SCIENCE↗

Structural breakdown in high power GaN-on-GaN p-n diode devices stressed to failure

The morphology of GaN-on-GaN vertical p-i-n diode devices after reverse-bias electrical stressing to breakdown has been investigated. All failed devices had irreversible structural damage, showing large surface craters that were ∼15–35 μm deep with lengthy surface cracks. Cross-sectional electron micrographs of failed devices showed substantial concentrations of threading dislocations around the cracks and near the crater surfaces. Progressive ion-milling across damaged devices revealed high densities of threading dislocations and the presence of voids beneath the surface cracks; these features were not observed in any unstressed devices. These results should serve as a useful reference for future reliability studies of vertical high-power GaN devices.

Peri, Prudhvi (ORCID:000000022338441X)↗

High mobility field effect transistor based on BaSnO{sub 3} with Al{sub 2}O{sub 3} gate oxide

We fabricated an n-type accumulation-mode field effect transistor based on BaSnO{sub 3} transparent perovskite semiconductor, taking advantage of its high mobility and oxygen stability. We used the conventional metal-insulator-semiconductor structures: (In,Sn){sub 2}O{sub 3} as the source, drain, and gate electrodes, Al{sub 2}O{sub 3} as the gate insulator, and La-doped BaSnO{sub 3} as the semiconducting channel. The Al{sub 2}O{sub 3} gate oxide was deposited by atomic layer deposition technique. At room temperature, we achieved the field effect mobility value of 17.8 cm{sup 2}/Vs and the I{sub on}/I{sub off} ratio value higher than 10{sup 5} for V{sub DS} = 1 V. These values are higher than those previously reported on other perovskite oxides, in spite of the large density of threading dislocations in the BaSnO{sub 3} on SrTiO{sub 3} substrates. However, a relatively large subthreshold swing value was found, which we attribute to the large density of charge traps in the Al{sub 2}O{sub 3} as well as the threading dislocations.

36 MATERIALS SCIENCE↗

Characterization of Stress Relaxation, Dislocations and Crystallographic Tilt Via X-ray Microdiffraction in GaN (0001) Layers Grown by Maskless Pendeo-Epitaxy

Intrinsic stresses due to lattice mismatch and high densities of threading dislocations and extrinsic stresses resulting from the mismatch in the coefficients of thermal expansion are present in almost all III-Nitride heterostructures. Stress relaxation in the GaN layers occurs in conventional and in pendeo-epitaxial films via the formation of additional misfit dislocations, domain boundaries, elastic strain and wing tilt. Polychromatic X-ray microdiffraction, high resolution monochromatic X-ray diffraction and finite element simulations have been used to determine the distribution of strain, dislocations, sub-boundaries and crystallographic wing tilt in uncoalesced and coalesced GaN layers grown by maskless pendeo-epitaxy. An important parameter was the width-to-height ratio of the etched columns of GaN from which the lateral growth of the wings occurred. The strain and tilt across the stripes increased with the width-to-height ratio. Tilt boundaries formed in the uncoalesced GaN layers at the column/wing interfaces for samples with a large ratio. Sharper tilt boundaries were observed at the interfaces formed by the coalescence of two laterally growing wings. The wings tilted upward during cooling to room temperature for both the uncoalesced and the coalesced GaN layers. It was determined that finite element simulations that account for extrinsic stress relaxation can explain the experimental results for uncoalesced GaN layers. Relaxation of both extrinsic and intrinsic stress components in the coalesced GaN layers contribute to the observed wing tilt and the formation of sub-boundaries.

36 MATERIALS SCIENCE↗

Evolution of cellular dislocation structures and defects in additively manufactured austenitic stainless steel under ion irradiation

Here, the evolution of irradiation-induced defects in additively manufactured (AM) austenitic stainless steel was explored in situ by 1 MeV Kr ion irradiation at 450 and 600 °C in a transmission electron microscope. Cellular dislocation structure in AM steel act as sink/trap sites for the irradiation-induced defects, resulting in the lower density and smaller dislocation loops in AM steel than conventional forged (CF) steel at 450 °C. The higher stacking fault energy and local stress concentration induced by cellular dislocation structure in AM steel promotes the unfaulting process and the formation of network dislocation at 600 °C.

36 MATERIALS SCIENCE↗

Enhanced numerical design of two-barrier infrared detectors with III–V compounds heterostructures considering the influence of lattice strain and misfit dislocations on the band gap

The goal of this work is the design of efficient infrared radiation detectors based on InAsSb compounds with two energy barriers around the absorber region. Two types of two-barrier detectors that work in the 3–5.5 μm wavelength range at 230 K is designed. Using our computer program to iteratively solve the Poisson equation, the spatial distribution of energy band edges in III–V heterostructures was calculated The influence of lattice stress, bending of the structure and doping on the energy shift of the edge of the bands is considered. Lattice strain is the cause of the formation of the misfit dislocations at the boundaries of the individual layers of the heterostructure. These dislocations partially relax the resulting stress and affect the lattice deformation in individual layers. From the minimum elastic energy condition, the density of these dislocations is determined. It has been shown that the band offset can be eliminated in the areas of both barriers in the designed two-barrier detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural properties of plastically deformed SrTiO 3 and KTaO 3

Dislocation engineering has the potential to open new avenues toward the exploration and modification of the properties of quantum materials. Strontium titanate (SrTi⁢O 3 , STO) and potassium tantalate (KTa⁢O 3 , KTO) are incipient ferroelectrics that show metallization and superconductivity at extremely low charge-carrier concentrations and have been the subject of resurgent interest. These materials also exhibit remarkable ambient-temperature ductility, and thus represent exceptional platforms for studies of the effects of deformation-induced dislocation structures on electronic properties. Recent work on plastically deformed STO revealed an enhancement of the superconducting transition temperature and the emergence of local ferroelectricity and magnetism near self-organized dislocation walls. Here, in this work, we present a comprehensive structural analysis of plastically deformed STO and KTO, employing specially designed strain cells, diffuse neutron and x-ray scattering, Raman scattering, and nuclear magnetic resonance (NMR). Diffuse scattering and NMR provide insight into the dislocation configurations and densities and their dependence on strain. As in the prior work on STO, Raman scattering reveals evidence for local ferroelectric order near dislocation walls in plastically deformed KTO. Our findings provide valuable information about the self-organized defect structures in both materials, and they position KTO as a second model system in which to explore the associated emergent physics.

36 MATERIALS SCIENCE↗

Incoherent twin boundary migration induced by ion irradiation in Cu

Grain boundaries can act as sinks for radiation-induced point defects. The sink capability is dependent on the atomic structures and varies with the type of point defects. Using high-resolution transmission electron microscopy, we observed that {Sigma}3{l_brace}112{r_brace} incoherent twin boundary (ITB) in Cu films migrates under Cu{sup 3+} ion irradiation. Using atomistic modeling, we found that {Sigma}3{l_brace}112{r_brace} ITB has the preferred sites for adsorbing interstitials and the preferential diffusion channels along the Shockley partial dislocations. Coupling with the high mobility of grain boundary Shockley dislocations within {Sigma}3{l_brace}112{r_brace} ITB, we infer that {Sigma}3{l_brace}112{r_brace} ITB migrates through the collective glide of grain boundary Shockley dislocations, driven by a concurrent reduction in the density of radiation-induced defects, which is demonstrated by the distribution of nearby radiation-induced defects.

36 MATERIALS SCIENCE↗