Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

The influence of Pt redistribution on Ni{sub 1-x}Pt{sub x}Si growth properties

We have studied the influence of Pt on the growth of Ni silicide thin films by examining the Pt redistribution during silicide growth. Three different initial Pt configurations were investigated, i.e., a Pt alloy (Ni+Pt/<Si>), a Pt capping layer (Pt/Ni/<Si>) and a Pt interlayer (Ni/Pt/<Si>), all containing 7 at. % Pt relative to the Ni content. The Pt redistribution was probed using in situ real-time Rutherford backscattering spectrometry (RBS) whereas the phase sequence was monitored during the solid phase reaction (SPR) using in situ real-time x-ray diffraction. We found that the capping layer and alloy exhibit a SPR comparable to the pure Ni/<Si> system, whereas Pt added as an interlayer has a much more drastic influence on the Ni silicide phase sequence. Nevertheless, for all initial sample configurations, Pt redistributes in an erratic way. This phenomenon can be assigned to the low solubility of Pt in Ni{sub 2}Si compared to NiSi and the high mobility of Pt in Ni{sub 2}Si compared to pure Ni. Real-time RBS further revealed that the crucial issue determining the growth properties of each silicide phase is the Pt concentration at the Si interface during the initial stages of phase formation. The formation of areas rich in Pt reduce the Ni silicide growth kinetics which influences the phase sequence and properties of the silicides.

36 MATERIALS SCIENCE↗

Enhancement of the nucleation of smooth and dense nanocrystalline diamond films by using molybdenum seed layers

A method for the nucleation enhancement of nanocrystalline diamond (NCD) films on silicon substrates at low temperature is discussed. A sputter deposition of a Mo seed layer with thickness 50 nm on Si substrates was applied followed by an ultrasonic seeding step with nanosized detonation diamond powders. Hot-filament chemical vapor deposition (HF-CVD) was used to nucleate and grow NCD films on substrates heated up at 550 deg. C. The nucleation of diamond and the early stages of NCD film formation were investigated at different methane percentages in methane/hydrogen gas mixtures by atomic force microscopy, micro-Raman spectroscopy, scanning electron microscopy, and grazing incidence x-ray analyses in order to gain specific insight in the nucleation process of NCD films. The nucleation kinetics of diamond on the Mo-coated Si substrates was found to be up to ten times higher than on blank Si substrates. The enhancement of the nucleation of diamond on thin Mo interlayers results from two effects, namely, (a) the nanometer rough Mo surface shows an improved embedding of ultrasonically introduced nanosized diamond seeds that act as starting points for the diamond nucleation during HF-CVD and (b) the rapid carbonization of the Mo surface causes the formation of Mo{sub 2}C onto which diamond easily nucleates. The diamond nucleation density progressively increases at increasing methane percentages and is about 5x10{sup 10} cm{sup -2} at 4.0% methane. The improved nucleation kinetics of diamond on Mo interlayers facilitates the rapid formation of NCD films possessing a very low surface roughness down to {approx}6 nm, and allows a submicron thickness control.

36 MATERIALS SCIENCE↗

Tuning the electron injection barrier between Co and C{sub 60} using Alq{sub 3} buffer layer

We demonstrate that the electron injection barrier ({Delta}{sub e}) between Co and C{sub 60} can be tuned by inserting a thin Alq{sub 3} interlayer. Using ultraviolet photoemission spectroscopy, {Delta}{sub e} of C{sub 60} on Alq{sub 3}-predecorated Co ({Delta}{sub e}=0.3 eV) was found to be reduced by 0.3 eV compared with that of C{sub 60} deposited directly on the bare Co metal surface ({Delta}{sub e}=0.6 eV). Due to Fermi level pining at the Alq{sub 3}/Co interface, this tuning effect is independent of the thickness of Alq{sub 3} interlayer from multilayer to monolayer. Based on the experimental results, band level alignment diagrams are proposed for C{sub 60}/Co and C{sub 60}/Alq{sub 3}/Co interfaces with two different Alq{sub 3} thicknesses. Our findings could have potential applications for the reduction in the carrier injection barrier in organic spin valves.

36 MATERIALS SCIENCE↗

Mg doped InN and confirmation of free holes in InN

We report a systematic investigation on Mg doped InN epilayers grown by radio-frequency plasma-assisted molecular beam epitaxy. Electrolyte capacitance voltage (ECV) combined with thermopower measurements find p-type conduction over an Mg concentration range. For InN:Mg in this p-type 'window' the Seebeck coefficients dramatically change their signs from negative to positive when the thickness of undoped InN interlayer decreases to zero. This notable sign change of Seebeck coefficient explains the previous inconsistency between ECV and thermopower results and confirms the existence of mobile holes in the InN:Mg. Taking into account the undoped InN interlayer, the hole density and mobility are extracted.

36 MATERIALS SCIENCE↗

Adhesion of tungsten carbide reinforced amorphous hydrocarbon thin films (WC/a-C:H) to steel substrates for tribological applications

We have explored the adhesive interlayer structure for a tungsten carbide reinforced amorphous hydrocarbon thin film coating (WC/a-C:H) that demonstrated excellent coating adhesion under highly stressed tribological contact. Transmission electron microscopy (TEM) analysis including cross-sectional imaging, electron diffraction, and energy dispersive spectroscopy was performed on abrupt and gradient interfaces within the multilayer film architecture. Interpretation of these results is aided by quantum mechanical calculations that were performed to investigate bonding interactions of the Cr adhesive interlayer to the Fe substrate surface within a - 3 nm thick interfacial region. Low levels of oxygen present in the coating deposition chamber during deposition were found at the Fe-Cr interface using high-resolution TEM. Molecular orbital calculations for a linear three-atom molecular model Fe-O-Cr demonstrate the role of O in strengthening Fe to Cr bonding within that interfacial region.

36 MATERIALS SCIENCE↗

Analysis of the weak coupling of the IrMn/Co/Ru/NiFe structures by ferromagnetic resonance

The Ir{sub 20}Mn{sub 80}/Co/Ru/Ni{sub 81}Fe{sub 19} spin valve structures have been produced by sputtering deposition and analyzed by ferromagnetic resonance. Two well resolved modes are identified in the FMR spectra as the resonance of the Co and NiFe layers. The in-plane angular dependence of the resonance peaks for the NiFe layer present a small asymmetry, which is attributed to the interlayer exchange interaction between ferromagnetic layers across the nonmagnetic spacer. The data were analyzed considering the exchange bias at the IrMn/Co interface and the indirect coupling between Co and NiFe. The in-plane angular dependence of the resonance fields of both Co and NiFe layers present an upward (downward) shift for antiferromagnetic (ferromagnetic) coupling with respect to a system with no interlayer coupling.

36 MATERIALS SCIENCE↗

Dynamics of Water Confined in Synthetic Saponite Clays

The dynamics of water in two synthetic saponite clays (treated by microwave) with different interlayer spacing has been studied using the quasielastic neutron scattering technique. A model in which the molecules undergo random jump diffusion describes the dynamics of water in both clays. The dynamics of water confined in both saponite clays considered here is found to be hindered in comparison to the bulk phase. It is found that diffusivity increases for samples having higher interlayer spacing.

36 MATERIALS SCIENCE↗

Low emissivity Ag/Ta/glass multilayer thin films deposited by sputtering

Ta is deposited on a glass substrate as an interlayer for the two-dimensional growth of Ag thin films because Ta has good thermal stability and can induce a negative surface-energy change in Ag/glass. From the transmission electron microscopy results, we concluded that the Ag crystals in the bottom layer (seemingly on Ag/Ta) were flattened; this was rarely observed in the three-dimensional growth mode. Comparing Ag/Ta/glass with Ag/glass, we found that the Ta interlayer was effective in reducing both the resistance and the emissivity, accompanied by the relatively high transmittance in the visible region. In particular, Ag(9 nm)/Ta(1 nm)/glass film showed 0.08 of the emissivity, including {approx}61% of the transmittance in the visible region (wavelength: 550 nm).

36 MATERIALS SCIENCE↗

Effect of the number of interfaces on the magnetic properties of [SnO{sub 2}/Cu-Zn ferrite] multilayer

The [SnO{sub 2}/Cu-Zn ferrite (CZF)]{sub n} (n = 5, 10, 15, and 20) multilayer (ML) were deposited by rf-magnetron sputtering to study their magnetic properties. The magnetization and ferromagnetic resonance (FMR) measurements were undertaken to understand the effect of interfaces on the magnetic properties of these ML. FMR signal line shape changes from asymmetric to symmetric as n increases. The FMR signal peak to peak intensity, FMR linewidth, effective and saturation magnetization and coercivity exhibit oscillations as a function of n. In the parallel configuration the resonance field increases with increase in n, presumably due to the decrease in the active layer to dead layer thickness ratio. The interlayer coupling is strong in the ML with n = 5 leading to the formation of spin waves. The ML interlayer coupling and anisotropy decreases with increasing n. The oscillatory behavior of the magnetic properties can be ascribed to the nonmonotonic variations in the structure and the geometry of the interfaces.

36 MATERIALS SCIENCE↗

Effect of dislocations on electron mobility in AlGaN/GaN and AlGaN/AlN/GaN heterostructures

Al{sub x}Ga{sub 1-x}N/GaN (x = 0.06, 0.12, 0.24) and AlGaN/AlN/GaN heterostructures were grown on 6 H-SiC, GaN-on-sapphire, and free-standing GaN, resulting in heterostructures with threading dislocation densities of {approx}2 Multiplication-Sign 10{sup 10}, {approx}5 Multiplication-Sign 10{sup 8}, and {approx}5 Multiplication-Sign 10{sup 7} cm{sup -2}, respectively. All growths were performed under Ga-rich conditions by plasma-assisted molecular beam epitaxy. Dominant scattering mechanisms with variations in threading dislocation density and sheet concentration were indicated through temperature-dependent Hall measurements. The inclusion of an AlN interlayer was also considered. Dislocation scattering contributed to reduced mobility in these heterostructures, especially when sheet concentration was low or when an AlN interlayer was present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic scattering from an adsorbed monolayer solid with a helium beam that penetrates to the substrate

Diffraction and one-phonon inelastic scattering of a thermal energy helium atomic beam are evaluated in the situation that the target monolayer lattice is so dilated that the atomic beam penetrates to the interlayer region between the monolayer and the substrate. The scattering is simulated by propagating a wavepacket and including the effect of a feedback of the inelastic wave onto the diffracted wave, which represents a coherent re-absorption of the created phonons. Parameters are chosen to be representative of an observed p(1 Multiplication-Sign 1) commensurate monolayer solid of H{sub 2}/NaCl(001) and a conjectured p(1 Multiplication-Sign 1) commensurate monolayer solid of H{sub 2}/KCl(001). For the latter, there are cases where part of the incident beam is trapped in the interlayer region for times exceeding 50 ps, depending on the spacing between the monolayer and the substrate and on the angle of incidence. The feedback effect is large for cases of strong transient trapping.

36 MATERIALS SCIENCE↗

First-principles study of graphene adsorbed on WS{sub 2} monolayer

We perform first-principles calculations to study the energetics and electronic properties of graphene adsorbed on WS{sub 2} surface (G/WS{sub 2}). We find that the graphene can be bound to WS{sub 2} monolayer with an interlayer spacing of about 3.9 ´Å with a binding energy of −21–32 meV per carbon atom dependent on graphene adsorption arrangement, suggesting a weak interaction between graphene and WS{sub 2}. The nearly linear band dispersion character of graphene can be preserved in G/WS{sub 2} system, with a sizable band gap, depending on graphene stacking patterns on WS{sub 2} and the distance between graphene and WS{sub 2} monolayer. More interestingly, when the interlayer spacing is larger than 3.0 ´Å, the energy-gap opening is mainly determined by the distortion of the isolated graphene peeled from WS{sub 2} surface, independent on the WS{sub 2} substrate. Further tight-binding model analysis demonstrates that the origin of semiconducting properties can be well understood by the variation of on-site energy of graphene induced by WS{sub 2} substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunneling magnetoresistance tuned by a vertical electric field in an AA-stacked graphene bilayer with double magnetic barriers

We investigate the effect of a vertical electric field on the electron tunneling and magnetoresistance in an AA-stacked graphene bilayer modulated by the double magnetic barriers with parallel or antiparallel configuration. The results show that the electronic transmission properties in the system are sensitive to the magnetic-barrier configuration and the bias voltage between the graphene layers. In particular, it is found that for the antiparallel configuration, within the low energy region, the blocking effect is more obvious compared with the case for the parallel configuration, and even there may exist a transmission spectrum gap which can be arbitrarily tuned by the field-induced interlayer bias voltage. We also demonstrate that the significant discrepancy between the conductance for both parallel and antiparallel configurations would result in a giant tunneling magnetoresistance ratio, and further the maximal magnetoresistance ratio can be strongly modified by the interlayer bias voltage. This leads to the possible realization of high-quality magnetic sensors controlled by a vertical electric field in the AA-stacked graphene bilayer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sign change of exchange bias in [Pt/Co]{sub 3}/IrMn multilayer

The properties of exchange bias in a multilayer of [Pt(1.0 nm)/Co(1.0 nm)]{sub 2}/Pt(t{sub Pt} nm)/Co(1.0 nm)/ IrMn(12.0 nm) were investigated with a variation of Pt layer thickness, t{sub Pt}. For t{sub Pt} ≤ 1.6 nm, it was typically observed that Co layers were ferromagnetically coupled while IrMn layer exhibited negative exchange bias. With increasing Pt thickness, antiferromagnetic (AF) interlayer coupling strength increased and caused AF spin configuration between the Co layers. With further increasing of Pt thickness (t{sub Pt} = 2.5 nm), the exchange bias between Co and IrMn layers was changed from negative to positive. Therefore, a large enhancement of AF interlayer coupling induced the sign change of exchange bias from negative to positive and resulted in a drastic change of switching behavior in a magnetization reversal. Both extraordinary Hall-effect and magnetoresistance were measured to verify the exchange bias direction and spin configurations upon magnetization reversal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automated High-Pressure Titration System with In Situ Infrared Spectroscopic Detection

A fully automated titration system with infrared detection was developed for investigating interfacial chemistry at high pressures. The apparatus consists of a high-pressure fluid generation and delivery system coupled to a high-pressure cell with infrared optics. A manifold of electronically actuated valves is used to direct pressurized fluids into the cell. Precise reagent additions to the pressurized cell are made with calibrated tubing loops that are filled with reagent and placed in-line with the cell and a syringe pump. The cell’s infrared optics facilitate both transmission and attenuated total reflection (ATR) measurements to monitor bulk-fluid composition and solid-surface phenomena such as adsorption, desorption, complexation, dissolution, and precipitation. Switching between the two measurement modes is accomplished with moveable mirrors that direct radiation from a Fourier transform infrared spectrometer into the cell along transmission or ATR light paths. The versatility of the high-pressure IR titration system is demonstrated with three case studies. First, we titrated water into supercritical CO2 (scCO2) to generate an infrared calibration curve and determine the solubility of water in CO2 at 50 °C and 90 bar. Next, we characterized the partitioning of water between a montmorillonite clay and scCO2 at 50 °C and 90 bar. Transmission-mode spectra were used to quantify changes in the clay’s sorbed water concentration as a function of scCO2 hydration, and ATR measurements provided insights into competitive residency of water and CO2 on the clay surface and in the interlayer. Finally, we demonstrated how time-dependent studies can be conducted with the system by monitoring the carbonation reaction of forsterite (Mg2SiO4) in water-bearing scCO2 at 50 °C and 90 bar. Immediately after water dissolved in the scCO2, a thin film of adsorbed water formed on the mineral surface, and the film thickness increased with time as the forsterite began to dissolve. However, after approximately 2.5 hours, the trend reversed, and a carbonate precipitate began to form on the forsterite surface, exposing dramatic chemical changes in the thin-water film. Collectively, these applications illustrate how the high-pressure IR titration system can provide molecular-level information about the interactions between variably wet scCO2 and minerals relevant to underground storage of CO2 (geologic carbon sequestration). The apparatus could also be utilized to study high-pressure interfacial chemistry in other areas such as catalysis, polymerization, food processing, and oil and gas recovery.

Environmental Molecular Sciences Laboratory↗

Organic integrated circuits for information storage based on ambipolar polymers and charge injection engineering

Ambipolar semiconducting polymers, characterized by both high electron (μ{sub e}) and hole (μ{sub h}) mobility, offer the advantage of realizing complex complementary electronic circuits with a single semiconducting layer, deposited by simple coating techniques. However, to achieve complementarity, one of the two conduction paths in transistors has to be suppressed, resulting in unipolar devices. Here, we adopt charge injection engineering through a specific interlayer in order to tune injection into frontier energy orbitals of a high mobility donor-acceptor co-polymer. Starting from field-effect transistors with Au contacts, showing a p-type unbalanced behaviour with μ{sub h} = 0.29 cm{sup 2}/V s and μ{sub e} = 0.001 cm{sup 2}/V s, through the insertion of a caesium salt interlayer with optimized thickness, we obtain an n-type unbalanced transistor with μ{sub e} = 0.12 cm{sup 2}/V s and μ{sub h} = 8 × 10{sup −4} cm{sup 2}/V s. We applied this result to the development of the basic pass-transistor logic building blocks such as inverters, with high gain and good noise margin, and transmission-gates. In addition, we developed and characterized information storage circuits like D-Latches and D-Flip-Flops consisting of 16 transistors, demonstrating both their static and dynamic performances and thus the suitability of this technology for more complex circuits such as display addressing logic.

36 MATERIALS SCIENCE↗

Charge transport across organic heterostructure: Role of interfacial density of states

The mechanism of carrier transport across organic-organic hetero-interfaces is crucial for organic devices. For purposes of this study, we choose two hole transport materials 4, 4′, 4″-tris(N-3-methylphenyl-N-phenyl-amino) triphenyl-amine (m-MTDATA) and N, N′-diphenyl-N, N′-bis(1-naphthyl) (1, 1′-biphenyl)-4, 4′diamine. We demonstrate that transport across such interfaces can be controlled by introducing a thin undoped layer, which is chosen to be 10–30 nm of m-MTDATA layer in this particular case. By correlating the low frequency capacitance-voltage and temperature dependence of current density-voltage (J-V) characteristics, we show that the occupation of local density of states (LDOS) on both sides controls the transport at the hetero-interface and that it can be modified by the introduction of interlayer. The thickness of the undoped interlayer effectively acts as a control on carrier concentration at the interface leading to the modification of the effective energy offset, and overlap of the LDOS. The slope of the J-V characteristics in the exponential regime has a temperature dependent term and a purely voltage dependent term. The temperature dependence of J-V characteristics is explained by including field dependence of mobility and tunneling across LDOS. We trace the origin of the offset at the hetero-interface and estimate its values for the different cases consistent with the proposed model of thermally assisted tunneling at the interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards bio-silicon interfaces: Formation of an ultra-thin self-hydrated artificial membrane composed of dipalmitoylphosphatidylcholine (DPPC) and chitosan deposited in high vacuum from the gas-phase

The recent combination of nanoscale developments with biological molecules for biotechnological research has opened a wide field related to the area of biosensors. In the last years, device manufacturing for medical applications adapted the so-called bottom-up approach, from nanostructures to larger devices. Preparation and characterization of artificial biological membranes is a necessary step for the formation of nano-devices or sensors. In this paper, we describe the formation and characterization of a phospholipid bilayer (dipalmitoylphosphatidylcholine, DPPC) on a mattress of a polysaccharide (Chitosan) that keeps the membrane hydrated. The deposition of Chitosan (∼25 Å) and DPPC (∼60 Å) was performed from the gas phase in high vacuum onto a substrate of Si(100) covered with its native oxide layer. The layer thickness was controlled in situ using Very High Resolution Ellipsometry (VHRE). Raman spectroscopy studies show that neither Chitosan nor DPPC molecules decompose during evaporation. With VHRE and Atomic Force Microscopy we have been able to detect phase transitions in the membrane. The presence of the Chitosan interlayer as a water reservoir is essential for both DPPC bilayer formation and stability, favoring the appearance of phase transitions. Our experiments show that the proposed sample preparation from the gas phase is reproducible and provides a natural environment for the DPPC bilayer. In future work, different Chitosan thicknesses should be studied to achieve a complete and homogeneous interlayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗