Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

An experimental study on gas-liquid phase fluid migration in hydrate-bearing sediments during hydrate dissociation

Natural gas hydrate production tests face problems such as severe sand blockage, poor gas-liquid phase separation, and significant land subsidence. This is because of the insufficient understanding of the complex phase transition and gas-liquid multi-phase fluid migration during hydrate dissociation. In hydrate-bearing sediment systems, hydrate phase transition couples with gas-liquid fluid migration. The phase transition causes changes in pore structure, which in turn modifies porous infiltration parameters and fluid flow capacity. Meanwhile, alterations in phase interfaces affect key parameters like surface tension and wettability. Gas-liquid fluid migration influences heat and mass transfer, thus affecting phase equilibrium and dissociation rates. To bridge the gap in describing gas-liquid fluid migration during hydrate dissociation in experiments, this research innovatively integrated an unsteady-state gas displacement by water and a quantitative hydrate dissociation process, independently developed a multi-phase seepage experimental system suitable for hydrate dissociation and determined the relationship between seepage parameters and hydrate saturation under different porosity. The results are as follows: a) Core samples with higher initial porosity show a greater recovery rate of fluid flow capacity. b) The retarding effect of multi-phase fluid has a more significant impact on the migration of the wetting phase fluid (water) than that of the non-wetting phase fluid (methane). c) During hydrate dissociation, the evolution of absolute permeability shows an “S-shaped” pattern, and the evolution of relative permeability shows a “wiring-harness” pattern. In conclusion, the findings can provide a theoretical basis for preventing geological disasters and for geotechnical engineering design during hydrate production.

58 GEOSCIENCES↗

In-situ observation of single-phase compositionally-complex oxide formation during high-pressure and high-temperature synthesis

Compositionally-complex oxides (CCOs) with equal or non-equal atomic ratios of multi-principal cations are single-phase solid solutions and possess unique structural characteristics and correlated possibilities for tailorable and exceptional functionalities. However, breakdown of single-phase structure and phase separation impair widespread adoption of CCOs under in-service environments. Here, in-situ phase transformation during high-pressure and high-temperature synthesis of an exemplary CCO (CeZrHf) 0.852 (YbY) 0.148 O 2-δ is for the first time clarified by using synchrotron X-ray energy dispersive diffraction. During synthesizing at ~4.5 GPa inside a large-volume press, ZrO 2 and HfO 2 gradually initiate lattice diffusion as monoclinic (022) and (220) peaks collapse and merge completely at 973 K; CeO 2 starts diffusing as the dramatic intensity change of cubic (220) peak above 1073 K, causing a metastable phase formation; single-phase solid solution ultimately forms at 1673 K. Importantly, the results revealed provide in-depth understanding of phase transformation dynamics and insights for novel design paradigm of CCOs.

36 MATERIALS SCIENCE↗

Electronic Origin For The Phase Transition From Amorphous LixSi To Crystalline Li15Si4

Silicon has been widely explored as an anode material for lithium ion battery. Upon lithiation, silicon transforms to amorphous LixSi (a-LixSi) via electrochemical driven solid state amorphization. With increasing lithium concentration, a-LixSi transforms to crystalline Li15Si4 (c-Li15Si4). The mechanism of this crystallization process is not known. In this paper, we report the fundamental characteristics of the phase transition of a-LixSi to c-Li15Si4 using in-situ scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS), and density function theory (DFT) calculation. We find that when the lithium concentration in a-LixSi reaches a critical value of x = 3.75, the a-Li3.75Si spontaneously and congruently transforms to c-Li15Si4 by a process that is solely controlled by the lithium concentration in the a-LixSi, involving neither large scale atomic migration nor phase separation. DFT calculations indicate that c-Li15Si4 formation is favored over other possible crystalline phases due to the similarity in electronic structure with a-Li3.75Si.

Environmental Molecular Sciences Laboratory↗

Wettability of ultra-small pores of carbon electrodes by size-asymmetric ionic fluids

Recently, we studied the phase behavior of ionic fluids under confinement using the classical density functional theory within the framework of the restricted primitive model. Additionally, the theoretical results indicate that narrowing the pore size may lead to a drastic reduction in the electric double layer capacitance, while increasing the surface electrical potential would improve the ionic accessibility of micropores. In this work, we extend the theoretical investigation to systems containing size-asymmetric electrolytes that may exhibit a vapor-liquid like phase transition in the bulk phase. The effects of pore size and surface electric potential on the phase diagram and microscopic structures of the confined electrolytes were studied over a broad range of parameters. We found that decreasing the pore size or increasing the surface potential could destabilize the liquid phase in micropores, and capillary evaporation could occur regardless of the size asymmetry between cations and anions. Compared to that in a symmetric ionic system, the vapor-liquid phase separation is more likely to take place as the size asymmetry becomes more pronounced. The phase transition would alter the “accessibility” of ions to micropores and lead to coexisting micropores with different surface charge densities as identified by Monte Carlo simulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous mapping of nanoscale dielectric, electrochemical, and ferroelectric surface properties of van der Waals layered ferroelectric via advanced SPM

Ferroelectric surfaces involve a complex interplay between polarization and dielectric properties, internal and external surface charge screening, and ionic and electrochemical effects. There is currently no good way to simultaneously capture all the required information at appropriate length scales. To this end, we present an advanced scanning probe microscopy approach for simultaneously mapping surface potential, dielectric, and piezoelectric properties on the nanoscale. For quantitatively mapping electromechancial properties, we utilize interferometric displacement sensing piezoresponse force microscopy, which measures the effective piezoelectric coefficient free of background artifacts such as the cantilever body electrostatics. The dielectric and surface electrochemical properties are captured during G-mode electrostatic force microscopy/Kelvin probe force microscopy operated in the lift mode. We show the capabilities of this approach on the chemically phase separated composite sample consisting of a van der Waals layered ferroelectric CuInP 2 S 6 phase and a non-polar In 4/3 P 2 S 6 phase. Finally, we demonstrate domain structure evolution during thermally stimulated phase transition.

36 MATERIALS SCIENCE↗

Exciton condensation in quantum Hall bilayers at total filling ν T = 5

We introduce the coupled quantum Hall bilayers each at half-filled first excited Landau levels with varying the layer distance. Based on numerical exact diagonalization on torus, we identify two distinct phases separated by a critical layer distance dc. From dc to infinite layer distance, the topological phase is smoothly connected to a direct tensor product of two Moore-Read states, while the interlayer coherence emerges at d < dc characterizedby the xy easy-plane ferromagnetic energy spectra, gapless pseudospin excitations and the finite exciton super-fluid stiffness, corresponding to the exciton superfluid state. More interestingly, the results of the ground state fidelity, the evolution of energy spectra, and the superfluid stiffness indicate a possible continuous transition.Theoretically it can be interpreted as a topological phase transition which simultaneously changes the topology of ground state and breaks symmetry, providing a fascinating example of transitions beyond Landau paradigm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Altered reactivity and emergence of ionic metal ordered structures in Li-Cs at high pressure

We show how pressure fundamentally alters the repulsive nature of the nonreactive Li-Cs mixture, converting it from strongly phase separating at ambient pressure to strongly long-range ordering at high pressures. The ordered phases found via a global space group optimization within the density-functional theory are Li{sub 7} Cs in the Cmmm structure, LiCs in the B2 structure, and Li{sub 7} Cs in the C2/m structure. These structures are remarkably stabilized by a pressure-induced increase in charge transfer from Cs to Li unit, an unusual effect concerning two elements from the same group (isovalent). These high-pressure phases exhibit interesting behaviors: (i) LiCs (B2 ) has its Cs(5p) core states nearly merged with the valence Cs(6s) states, indicating that core states can become valence states at high pressures; (ii) Li{sub 7} Cs (Cmmm ) structure exhibits an interesting 1D electronic structure within a 3D crystal structure.

36 MATERIALS SCIENCE↗

Two dimensional topology optimization of heat exchangers with the volume fraction method

We perform a comparison study of two topology optimizations methods applied to the design of a two fluids heat exchanger modeled with a coupled thermal-flow problem. The flow follows an isothermal and incompressible Stokes-Brinkman equation and the heat transfer is governed by a convection-diffusion equation without internal generation and high Peclet number. To keep the two fluid phases separated, we solve two Stokes-Brinkman equations, where the Brinkman term models the other phase as a solid. These two velocity fields are then fed to the heat transfer equation. Our goal is to maximize the enthalpy at the cold outlet while constraining the pressure drop. We first solve the design modeling the solid and fluid phases with a volume fraction variable. A SIMP-like penalization in the Brinkman term drives the optimization to a discrete design. The cost and constraint function derivatives are calculated with the library pyadjoint and the optimization is performed by IPOPT. We present optimized designs in two dimensions and discuss the influence of the parameters.

Beck, VictorA.↗

High Performance Computing to Enable Next-Generation Low-Temperature Waste Heat Recovery

US manufacturing industry fails to recover an estimated 900 trillion BTUs of low-temperature waste heat from its processes each year. A grand research challenge has been to develop waste heat recovery technology that can be applied to industrial manufacturing processes and vehicle operations. The Oak Ridge National Laboratory (ORNL)/Eaton research team performed computational research and development to design an innovative direct-contact heat exchanger (DCHE) technology to deliver low-cost, compact, longer-lifetime, high-efficiency waste heat recovery that is optimized for a low-temperature organic Rankine cycle. ORNL resources and expertise in high performance computing (HPC) and multiphase flows were utilized to realize this goal while advancing the fundamental understanding of two-phase, two-immiscible-fluid turbulent flow heat transfer for heat exchangers. In the first stage of the project, a computational fluid dynamics (CFD) model of a DCHE was developed. Verification and limited validation of the numerical solution were performed using experimental data from published literature. To support efforts in verification and validation, two-dimensional CFD models were also developed with the objective of investigating different boundary conditions to reach converged, steady-state solutions.Based on benchmarking efforts, a baseline industry-grade design of a DCHE was developed, which consists of two horizontal pipes of different cross-sectional areas – joined by a converging-diverging nozzle in the middle and relies on a three-phase system with co-current flows for operation. Evaporation of the cold liquid (n-pentane or methanol) by the hot liquid water occurs in the first pipe. The first pipe contains two inlets for liquid water and liquid pentane (or liquid methanol). The second pipe with the larger cross-sectional area serves as a gravity-driven phase-separator. It contains two outlets that are staggered to avoid entrainment of the liquid water phase by the gas phase. This baseline design resulted from several trial-and-error evaluations using two-dimensional CFD models. Confirmatory three-dimensional CFD models were also run for different mass flow rates and inlet temperatures (inlet water temperature ranging from 50°C to 90°C), and efficiency plots were produced to fully characterize the proposed industrial-grade design of the DCHE.

97 MATHEMATICS AND COMPUTING↗

Alignment of fluid molecules in an EHD contact

Dichroic infrared emission spectra have been obtained from an operating elastohydrodynamic contact under conditions showing unequivocally that the molecules of the fluid are aligned under shear flow in the bulk of the fluid and that the extent of the alignment is increased by the presence of an additive in a small concentration. This work applied particularly to polyphenyl ether and to 1,1,2-trichloroethane as the additive, but similar results have been obtained with polycyclohexyls and the same additive. The observation of two separate glass transitions for the polycyclohexyl solution is an indication of the occurrence of a phase separation in the Hertzian inlet zone. A model has been developed to explain the effect of these phenomena and their relation to traction.

Lauer, J. L.↗

In Situ Activation of Microcapsules

Disclosed are microcapsules comprising a polymer shell enclosing two or more immiscible liquid phases in which a drug, or a prodrug and a drug activator are partitioned into separate phases. or prevented from diffusing out of the microcapsule by a liquid phase in which the drug is poorly soluble. Also disclosed are methods of using the microcapsules for in situ activation of drugs where upon exposure to an appropriate energy source the internal phases mix and the drug is activated in situ.

Morrison, Dennis R.↗

An ultrafast symmetry switch in a Weyl semimetal

Topological quantum materials exhibit fascinating properties with important applications for dissipationless electronics and fault-tolerant quantum computers. Manipulating the topological invariants in these materials would allow the development of topological switching applications analogous to switching of transistors. Lattice strain provides the most natural means of tuning these topological invariants because it directly modifies the electron–ion interactions and potentially alters the underlying crystalline symmetry on which the topological properties depend. However, conventional means of applying strain through heteroepitaxial lattice mismatch and dislocations are not extendable to controllable time-varying protocols, which are required in transistors. Integration into a functional device requires the ability to go beyond the robust, topologically protected properties of materials and to manipulate the topology at high speeds. Here in this paper we use crystallographic measurements by relativistic electron diffraction to demonstrate that terahertz light pulses can be used to induce terahertz-frequency interlayer shear strain with large strain amplitude in the Weyl semimetal WTe 2 , leading to a topologically distinct metastable phase. Separate nonlinear optical measurements indicate that this transition is associated with a symmetry change to a centrosymmetric, topologically trivial phase. We further show that such shear strain provides an ultrafast, energy-efficient way of inducing robust, well separated Weyl points or of annihilating all Weyl points of opposite chirality. This work demonstrates possibilities for ultrafast manipulation of the topological properties of solids and for the development of a topological switch operating at terahertz frequencies.

36 MATERIALS SCIENCE↗

Rapid Separation of Copper Phase and Iron-Rich Phase From Copper Slag at Low Temperature in a Super-Gravity Field

A novel approach for quickly separating a metal copper phase and iron-rich phase from copper slag at low temperature is proposed based on a super-gravity method. The morphology and mineral evolution of the copper slag with increasing temperature were studied using in situ high-temperature confocal laser scanning microscopy and ex situ scanning electron microscopy and X-ray diffraction methods. Fe{sub 3}O{sub 4} particles dispersed among the copper slag were transformed into FeO by adding an appropriate amount of carbon as a reducing agent, forming the slag melt with SiO{sub 2} at low temperature and assisting separation of the copper phase from the slag. Consequently, in a super-gravity field, the metallic copper and copper matte were concentrated as the copper phase along the super-gravity direction, whereas the iron-rich slag migrated in the opposite direction and was quickly separated from the copper phase. Increasing the gravity coefficient (G) significantly enhanced the separation efficiency. After super-gravity separation at G = 1000 and 1473 K (1200 °C) for 3 minutes, the mass fraction of Cu in the separated copper phase reached 86.11 wt pct, while that in the separated iron-rich phase was reduced to 0.105 wt pct. The recovery ratio of Cu in the copper phase was as high as up to 97.47 pct.

36 MATERIALS SCIENCE↗

Phase Intergrowth and Structural Defects in Organic Metal Halide Ruddlesden–Popper Thin Films

Organic metal halide Ruddlesden–Popper phases combine the excellent optoelectronic properties of three-dimensional, bulk hybrid perovskites with superior material stability in ambient conditions. However, the thin film structure of these layered perovskites is still poorly understood, as phase purity is typically determined solely by specular X-ray diffraction. The thin film structure of these Ruddlesden–Popper phases was examined by increasingly local characterization techniques. It is difficult to assess the phase purity by purely bulk optical and diffraction measurements. From the comparison of grazing-incidence wide angle X-ray scattering (GIWAXS) patterns of cast films to expected scattering from single-crystal structures, significant in-plane disorder was observed. Spatially localized photoluminescence measurements show that films do not phase separate on the micrometer-scale. Selected area electron diffraction measurements show the intergrowth of different phases within the same thin film, consistent with previous observations seen in epitaxially-grown Ruddlesden–Popper complex oxides. Despite the presence of phase impurities that would typically be detrimental for device performance, fits to photothermal deflection spectroscopy measurements show relatively low Urbach energies of 33 meV for (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 2 Pb 3 I 10 and 32 meV for (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 3 Pb 4 I 13 , indicating that the electronic properties are insensitive to the phase impurities.

36 MATERIALS SCIENCE↗

Intrinsic Nanoscience of δ Pu-Ga Alloys: Local Structure and Speciation, Collective Behavior, Nanoscale Heterogeneity, and Aging Mechanisms

Because diffraction measurements are sensitive only to the long range average arrangement of the atoms in the coherent portion of a crystal, complementary local structure measurements are required for a complete understanding of the structure of a complex material. This is particularly an issue in solid solutions where even random distributions of a solute will result in nanometer-scale fluctuations in the local composition. The structure will be further complicated if collective and cooperative phenomena organize the solute distribution via longer range interactions between non-bonded solute sites. If the solute affects the phase stability then the question is raised of whether the atoms in domains with local compositions outside the limits of the bulk phase will rearrange into the structure stable for that composition and temperature or if the resulting stress would prevent such a local phase transition. If the former, then phase separated, heterogeneous structures at or below the diffraction limit will form. This nanometerscale competition between the phase transition and the epitaxial mismatch – exacerbated by the added strain if the transition involves a volume change – raises the potential for the formation of novel structures that do not occur in bulk material, e.g., fcc Fe. This coupling over multiple scales between inhomogeneity ordering, elastic forces, phase competition, and texture in the form of coexisting structures is a hallmark of martensites, a class of complex materials that includes δ-stabilized PuGa and that often exhibit correlated atomic and electronic properties. The enigmatic and extreme nature of Pu is consistent with its exhibiting unusual structural behavior of this type, including nanoscale heterogeneity in δ-stabilized PuGa and its enhanced homogeneity on aging that has been suggested based on earlier X-ray Absorption Fine Structure (XAFS) spectroscopy and x-ray pair distribution function (pdf) measurements. Measurements on a defined set of laboratory-prepared materials now corroborate and better describe this heterogeneity while additional aged samples demonstrate the role of heterogeneity in aging processes in Pu.

Conradson, Steven D.↗

Dependence of the critical temperature in overdoped copper oxides on superfluid density

The physics of underdoped copper-oxide superconductors, including the pseudogap, spin and charge ordering, and their relation to superconductivity 1-3 , is intensely debated. The overdoped side is perceived as simpler, with strongly-correlated fermion physics evolving smoothly into the conventional Bardeen-Cooper-Schrieffer (BCS) behavior. Pioneering studies on a few overdoped samples 4-11 indicated that the superfluid density was much smaller than expected, but this was attributed to pair-breaking, disorder, and phase separation. Here, we test this conjecture by studying how the magnetic penetration depth λ and the phase stiffness ρs depend on temperature and doping, scanning densely the entire overdoped side of the La 2-x Sr x CuO 4 (LSCO) phase diagram. We have measured the absolute values of λ and ρs to the accuracy of ±1% in thousands of cuprate samples; the large statistics reveals clear trends and intrinsic properties. The films are quite homogeneous; variations in the critical temperature (T c ) within a film are very small (< 1 K). At every doping, ρs(T) decreases linearly with temperature. The T c (ρ s0) dependence is linear but with an offset, (T c - T 0 ) ∝ ρs0 where T0 ≈ 7 K, except very close to the origin where Tc ∝ √ρ s0. This scaling law defies the standard BCS description, posing a challenge to theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antiferromagnetism in a bosonic mixture of rubidium ({sup 87}Rb) and potassium ({sup 41}K)

We simulate the experimental possibility of observing antiferromagnetic (AF) order in bosonic mixtures of rubidium ({sup 87}Rb) and potassium ({sup 41}K) in a two-dimensional optical lattice in the presence of harmonic confinement. By tuning the interspecies interactions and the lattice heights, we have found the ground states, within the mean-field approximation, that interpolate from phase separation to AF order. For a moderate lattice height, the coexistence of the Mott and AF phases is possible for the Rb atoms whereas the K atoms remain in the AF-superfluid phase. This observation may provide an experimentally feasible route to hitherto unobserved AF order for {sup 87}Rb-{sup 41}K mixtures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Quantum magnetism of iron-based ladders: Blocks, spirals, and spin flux

Motivated by increasing experimental evidence of exotic magnetism in low-dimensional iron-based materials, we present a comprehensive theoretical analysis of magnetic states of the multiorbital Hubbard ladder in the orbital-selective Mott phase (OSMP). Here, the model we used is relevant for iron-based compounds of the AFe 2 X 3 family (where A=Cs, Rb, Ba, K are alkali metals and X=S, Se are chalcogenides). To reduce computational effort, and obtain almost exact numerical results in the ladder geometry, we utilize a low-energy description of the Hubbard model in the OSMP—the generalized Kondo-Heisenberg Hamiltonian. Our main result is the doping vs interaction magnetic phase diagram. We reproduce the experimental findings on the AFe 2 X 3 materials, especially the exotic block magnetism of BaFe 2 Se 3 (antiferromagnetically coupled 2×2 ferromagnetic islands of the ↑↑↓↓ form). As in recent studies of the chain geometry, we also unveil block magnetism beyond the 2×2 pattern (with block sizes varying as a function of the electron doping) and also an interaction-induced frustrated block-spiral state (a spiral order of rigidly rotating ferromagnetic islands). Moreover, we predict new phases beyond the one-dimensional system: a robust regime of phase separation close to half filling, incommensurate antiferromagnetism for weak interaction, and a quantum spin-flux phase of staggered plaquette spin currents at intermediate doping. Finally, exploiting the bonding/antibonding band occupations, we provide an intuitive physical picture giving insight into the structure of the phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗