Search NASA⌕ Search

SEARCH · Search NASA

Results for “powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Synthesis and luminescence properties of novel LiSrPO{sub 4}:Dy{sup 3+} phosphor

Graphical abstract: Novel LiSrPO4:Dy{sup 3+} phosphors were synthesized by solid-state reaction, and Dy{sup 3+}-doped concentration dependent luminescence properties, concentration quenching effect and the decay times were investigated in detail. Highlights: {yields} LiSrPO{sub 4}:Dy{sup 3+} could be excited by UV light and exhibited blue and yellow emission. {yields} Concentration quenching effect of LiSrPO{sub 4}:Dy{sup 3+} samples were investigated in detail. {yields} Decay times are estimated to be 0.57-0.89 ms for Dy{sup 3+} in LiSrPO{sub 4} host. -- Abstract: Novel LiSrPO{sub 4}:Dy{sup 3+} phosphors for white light-emitting diodes (w-LEDs) were synthesized by the conventional solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the phase formation of LiSrPO{sub 4}:Dy{sup 3+} materials. Luminescence properties results showed that the phosphor could be efficiently excited by the UV-vis light region from 250 to 460 nm, and it exhibited blue (483 nm) and yellow (574 nm) emission corresponding to {sup 4}F{sub 9/2} {yields} {sup 6}H{sub 15/2} transitions and {sup 4}F{sub 9/2} {yields} {sup 6}H{sub 13}/{sub 2} transitions, respectively. The luminescence intensity of LiSrPO{sub 4}:xDy{sup 3+} phosphor firstly increased and then decreased with increasing Dy{sup 3+} concentration, and reached the maximum at x = 0.03. It was found that concentration quenching occurred as a result of dipole-dipole interaction according to the Dexter's theory. The decay time was also determined for various concentrations of Dy{sup 3+} in LiSrPO{sub 4}.

36 MATERIALS SCIENCE↗

New type of incommensurate magnetic ordering in Mn{sub 3}TeO{sub 6}

Highlights: {yields} Mn{sub 3}TeO{sub 6} has a corundum related structure and orders magnetically below 23 K. {yields} The magnetic structure consists of several types of Mn-chains. {yields} The unique Mn site is split into two magnetically different orbits. {yields} One orbit forms a perfect helix with the spiral axis along the c-axis. {yields} The other orbit has a sine wave character along the c-axis. -- Abstract: The complex metal oxide Mn{sub 3}TeO{sub 6} exhibits a corundum related structure and has been prepared both in forms of single crystals by chemical transport reactions and of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties have been investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic measurements. At room temperature this compound adopts a trigonal structure, space group R3{sup -bar} with a = 8.8679(1) A, c = 10.6727(2) A. A long-range magnetically ordered state is identified below 23 K. An unexpected feature of this magnetic structure is several types of Mn-chains. Under the action of the incommensurate magnetic propagation vector k = [0, 0, 0.4302(1)] the unique Mn site is split into two magnetically different orbits. One orbit forms a perfect helix with the spiral axis along the c-axis while the other orbit has a sine wave character along the c-axis.

36 MATERIALS SCIENCE↗

Structural evolution of the double perovskites Sr{sub 2}B'UO{sub 6} (B' = Mn, Fe, Co, Ni, Zn) upon reduction: Magnetic behavior of the uranium cations

Highlights: {yields} Evolution of the double perovskites Sr{sub 2}B'UO{sub 6} upon reduction were studied by XRPD. {yields} Orthorhombic (Pnma) disordered perovskites SrB'{sub 0.5-x}U{sub 0.5+x}O{sub 3} were obtained at 900 {sup o}C. {yields} U{sup 5+/4+} and Zn{sup 2+} cations are distributed at random over the octahedral positions. {yields} AFM ordering for the perovskite with B' = Zn appears below 30 K. -- Abstract: We describe the preparation of five perovskite oxides obtained upon reduction of Sr{sub 2}B'UO{sub 6} (B' = Mn, Fe, Co, Ni, Zn) with H{sub 2}/N{sub 2} (5%/95%) at 900 {sup o}C during 8 h, and their structural characterization by X-ray powder diffraction (XRPD). During the reduction process there is a partial segregation of the elemental metal when B' = Co, Ni, Fe, and the corresponding B'O oxide when B' = Mn, Zn. Whereas the parent, oxygen stoichiometric double perovskites Sr{sub 2}B'UO{sub 6} are long-range ordered concerning B' and U cations. The crystal structures of the reduced phases, SrB'{sub 0.5-x}U{sub 0.5+x}O{sub 3} with 0.37 < x < 0.27, correspond to simple, disordered perovskites; they are orthorhombic, space group Pnma (No. 62), with a full cationic disorder at the B site. Magnetic measurements performed on the phase with B' = Zn, indicate uncompensated antiferromagnetic ordering of the U{sup 5+}/U{sup 4+} sublattice below 30 K.

36 MATERIALS SCIENCE↗

Sol–gel synthesis of long-lasting phosphors CdSiO{sub 3}: Mn{sup 2+}, RE{sup 3+} (RE = Tb, Eu, Nd) and luminescence mechanism research

Highlights: ► New long-lasting CdSiO{sub 3}: Mn{sup 2+}, RE{sup 3+} (RE = Tb, Eu, Nd) phosphors were synthesized by a sol–gel method. ► The afterglow performance of the CdSiO{sub 3}: Mn{sup 2+}, Eu{sup 3+} phosphor was the best. ► The role of RE{sup 3+} co-doped into the CdSiO{sub 3}: Mn{sup 2+} matrix was discussed in this paper. -- Abstract: Mn{sup 2+} and RE{sup 3+} (RE = Tb, Eu, Nd) co-doped CdSiO{sub 3} orange phosphors were prepared at 1050 °C by a sol–gel method. The phase and crystallinity of the synthesized materials were investigated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The luminescence characteristics were analyzed using photoluminescence (PL) spectra, afterglow decay curves, long-lasting phosphorescence spectra, and thermoluminescence (TL) spectra. Due to the difference in co-doped rare earth ionic radii, it varied greatly in trap density and trap depth caused by the different defects deriving from RE{sup 3+} ions co-doping into the CdSiO{sub 3}: Mn{sup 2+} host. The afterglow intensity and time for these samples increased as follows: CdSiO{sub 3}: Mn{sup 2+}0.2%, Nd{sup 3+}0.8% < CdSiO{sub 3}: Mn{sup 2+}0.4%, Tb{sup 3+}0.8% < CdSiO{sub 3}: Mn{sup 2+}0.4%, Eu{sup 3+}0.3%. CdSiO{sub 3}: Mn{sup 2+}0.4%, Eu{sup 3+}0.3% had the best afterglow properties, which could be due to the proper traps formed by Eu{sup 3+} ions co-doping into the host. The role of RE{sup 3+} co-doped into the CdSiO{sub 3}: Mn{sup 2+} matrix and the possible long-lasting phosphorescence process was also discussed in this paper.

36 MATERIALS SCIENCE↗

Palladium was supported on superparamagnetic nanoparticles: A magnetically recoverable catalyst for Heck reaction

Highlights: Black-Right-Pointing-Pointer Palladium-based heterogeneous catalyst was prepared facilely via the co-precipitation method. Black-Right-Pointing-Pointer The particles are nearly spherical in shape with an average size of 20 {+-} 1.0 nm. Black-Right-Pointing-Pointer The developed magnetic catalyst showed high activity for Heck reaction. Black-Right-Pointing-Pointer The catalyst was easily recovered from the reaction mixture with external magnetic field. Black-Right-Pointing-Pointer The catalytic efficiency for Heck reaction remains unaltered even after 6 repeated cycles. -- Abstract: A novel and high-performance palladium-based catalyst for Heck reaction was prepared easily by the co-precipitation method. The catalyst was characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS) and atomic absorption spectrophotometry (AAS). The catalyst afforded a fast conversion of the 4-bromonitrobenzene to 4-nitrostilbene at a catalyst loading of 5 mol%, and the efficiency of the catalyst remains unaltered even after 6 repeated cycles. The excellent catalytic performance of the Pd/Fe{sub 3}O{sub 4} catalyst might be attributed to the enhanced synergistic effect between Pd nanoparticles and magnetite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and luminescence properties of hierarchical SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) micro/nanocomposite architectures

Graphical abstract: Uniform SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) hierarchical microsphere assembled by numerous nanoplates have been successfully synthesized via a facile hydrothermal process in the presence of chelating reagent. Highlights: Black-Right-Pointing-Pointer Uniform SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) hierarchical microsphere were obtained by a simple hydrothermal method. Black-Right-Pointing-Pointer The reaction time, chelating reagent and F source play important roles for the formation of hierarchical microspheres. Black-Right-Pointing-Pointer The luminescence properties of lanthanide ion-doped SrF{sub 2} hierarchical microstructures were discussed. -- Abstract: Highly uniform SrF{sub 2} and SrF{sub 2}:Ln{sup 3+} (Ln = Er, Nd, Yb, Eu, Tb) hierarchical microspheres assembled by 2D nanoplates have been successfully synthesized by a facile and friendly hydrothermal route. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectra were used to characterize the samples. The experimental results indicate that reaction time and chelating reagent play a key role in forming the hierarchical microspheres. The formation mechanism was proposed based on the evolution of this morphology as a function of hydrothermal time. The near-infrared luminescence of lanthanide ions (Er, Nd, and Yb) doped SrF{sub 2} microspheres were discussed in detail. In addition, the as-obtained SrF{sub 2}:Eu{sup 3+} sample exhibits orange-red emission centered at 590 nm under excitation at 393 nm, while the SrF{sub 2}:Tb{sup 3+} exhibits a strong green emission at 540 nm. The as-synthesized SrF{sub 2}:Ln{sup 3+} luminescent microspheres might find some potential applications in areas of photoluminescence, telecommunication and laser emission.

36 MATERIALS SCIENCE↗

Meso/macroporous {gamma}-Al{sub 2}O{sub 3} fabricated by thermal decomposition of nanorods ammonium aluminium carbonate hydroxide

Highlights: Black-Right-Pointing-Pointer Rod-like AACH were synthesized by a hydrothermal treatment. Black-Right-Pointing-Pointer AACH was formed via a Al(OH){sub 3} {yields} (NH{sub 4}){sub 2}Al{sub 6}(CO{sub 3}){sub 3}(OH){sub 14}{center_dot}xH{sub 2}O {yields} NH{sub 4}Al(OH){sub 2}CO{sub 3}{center_dot}H{sub 2}O {yields} NH{sub 4}Al(OH){sub 2}CO{sub 3} path. Black-Right-Pointing-Pointer Alumina derived from AACH has a good thermal stability. Black-Right-Pointing-Pointer The obtained alumina possesses large pore volume and bimodal porosity. -- Abstract: Through exploring the reaction parameters during the synthesis of the AACH, rod-like ammonium aluminium carbonate hydroxide (AACH) with high crystallinity has been successfully prepared via a facile hydrothermal method. The synthesis parameters like time, the molar ratio of NH{sub 4}HCO{sub 3}/Al and the properties of starting materials were systematically investigated. The structure was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), IR and transmission electron microscopy (TEM). The experimental results display that the obtained {gamma}-Al{sub 2}O{sub 3} materials possess meso/macroporosity and large pore volume, which are mainly attributed to the removal of gas molecules during the decomposition of AACH. Moreover, using the rod-like AACH as precursor, {gamma}-Al{sub 2}O{sub 3} nanorods were obtained via a low-temperature thermal decomposition method.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of nanostructured zinc oxide and study of their optical properties

Highlights: Black-Right-Pointing-Pointer Nanostructured ZnO were successfully obtained by a hydrothermal route. Black-Right-Pointing-Pointer Inorganic precursor and molar ratio are key factors for morphology and particle size. Black-Right-Pointing-Pointer Optical properties were also studied. -- Abstract: Nanostructured ZnO (nanorods, nanoshuttles) have been synthesized by hydrothermal approach using ZnCl{sub 2} or Zn(NO{sub 3}){sub 2}{center_dot}6H{sub 2}O as zinc sources and cetyltrimethylammonium bromide as structure-directing agent. Techniques X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible absorption, Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy have been used to characterize the structure, morphology and composition of the nanostructured zinc oxide. The optical properties of the as-obtained materials were also studied and showing that it is possible to apply the ZnO nanoshuttles and nanorods on the UV filter, photocatalysis, and special optical devices.

36 MATERIALS SCIENCE↗

Effects of different precursors on size and optical properties of ceria nanoparticles prepared by microwave-assisted method

Highlights: Black-Right-Pointing-Pointer A rapid and efficient microwave method was applied for synthesis of nano ceria. Black-Right-Pointing-Pointer Changing precursor has great effects on optical properties and size of nano ceria. Black-Right-Pointing-Pointer Fabrication of ceria nanoparticles using Ce{sup 4+} salts leads to better results. Black-Right-Pointing-Pointer Band gap energies of ceria nanoparticles were evaluated by UV-vis spectroscopy. -- Abstract: Cerium oxide, ceria (CeO{sub 2}), is one of the favourable nanoparticles (NPs) that possesses many remarkable properties so that it can be used in medicine, chemistry, environment, energy, information, industry, and so on. In this study, the crystalline ceria NPs were successfully prepared by an efficient microwave-assisted heating technique from an aqueous solution using different cerium salts (Ce(IV) and Ce(III) salts). The products were characterized by X-ray powder diffraction (XRD), transmission electron microscope (TEM), FTIR spectroscopy, Raman spectroscopy, and UV-vis absorption spectroscopy. The results revealed that changing the precursor led to great effects on size, band gap energy, and the reaction time of preparing the ceria NPs. The significant feature of this manuscript is that the effects of different precursors on the structural and optical properties of ceria NPs were investigated for the first time. The average particle size of different samples was below 8 nm.

36 MATERIALS SCIENCE↗

Crystal structure and thermal expansion of LaCr{sub 1-x}Mg{sub x}O{sub 3}, 0 < x {<=} 0.25

Highlights: Black-Right-Pointing-Pointer Homogeneity range for LaCr{sub 1-x}Mg{sub x}O{sub 3} with orthorhombic perovskite structure is x {<=} 0.25. Black-Right-Pointing-Pointer First order OR phase transition occurs at 260-311 Degree-Sign C for LaCr{sub 1-x}Mg{sub x}O{sub 3}, 0{<=} x {<=}0.25. Black-Right-Pointing-Pointer TEC for high-temperature rhombohedral phase increases with magnesium content. -- Abstract: Solid solution LaCr{sub 1-x}Mg{sub x}O{sub 3}, 0 < x {<=} 0.25 was prepared by heating stoichiometric amounts of appropriate oxides in air at 1400 Degree-Sign C, 48 h. At room temperature it crystallizes in orthorhombically distorted GdFeO{sub 3}-type structure (a Almost-Equal-To {radical}2 Multiplication-Sign a{sub per}; b Almost-Equal-To {radical}2 Multiplication-Sign a{sub pe}; c Almost-Equal-To 2 Multiplication-Sign a{sub per}, where a{sub per} - perovskite subcell parameter). High-temperature X-ray powder diffraction (HT XRPD) and dilatometry revealed first order phase transition to rhombohedral perovskite phase (R-3c, a Almost-Equal-To {radical}2 Multiplication-Sign a{sub per}, c Almost-Equal-To 2{radical}3 Multiplication-Sign a{sub per}) at 260-311 Degree-Sign C (OR phase transition). Crystal structures of room-temperature orthorhombic and high-temperature rhombohedral phases for LaCr{sub 0.75}Mg{sub 0.25}O{sub 3} were refined using HT XRPD data. Temperature of OR phase transition increases gradually with increasing of magnesium content. Low-temperature orthorhombic phase exhibits TEC lower in comparison with high-temperature rhombohedral one (e.g. for LaCr{sub 0.85}Mg{sub 0.15}O{sub 3} TEC(O) = 8.8 ppm K{sup -1}; TEC(R) = 11.6 ppm K{sup -1}). TEC for rhombohedral phase increases with increasing magnesium content from 10.4 ppm K{sup -1} for LaCr{sub 0.95}Mg{sub 0.05}O{sub 3} to 12.1 ppm K{sup -1} for LaCr{sub 0.75}Mg{sub 0.25}O{sub 3}.

36 MATERIALS SCIENCE↗

Host-sensitized phosphorescence of Mn{sup 4+}, Pr{sup 3+,4+} and Nd{sup 3+} in MgAl{sub 2}Si{sub 2}O{sub 8}

Highlights: Black-Right-Pointing-Pointer The new red phosphors were synthesized in the MgAl{sub 2}Si{sub 2}O{sub 8} system. Black-Right-Pointing-Pointer These systems were characterized with DTA/TG, XRD, SEM and PL. Black-Right-Pointing-Pointer The excitation and emission mechanisms were explained. -- Abstract: Mn{sup 4+} doped and Pr{sup 3+,4+}, Nd{sup 3+} co-doped MgAl{sub 2}Si{sub 2}O{sub 8}-based phosphors were first of all synthesized about 1300 Degree-Sign C. They were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray powder diffraction (XRD), photoluminescence (PL) and scanning electron microscopy (SEM). The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 610-715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the intrinsic d-d transitions of Mn{sup 4+}.

36 MATERIALS SCIENCE↗

Photocatalytic degradation of gaseous toluene over hollow “spindle-like” α-Fe{sub 2}O{sub 3} loaded with Ag

Highlights: ► Hollow α-Fe{sub 2}O{sub 3} spindle-shaped microparticles were prepared for Ag support. ► The hollow α-Fe{sub 2}O{sub 3} and Ag/α-Fe{sub 2}O{sub 3} materials were used to degrade gaseous toluene. ► Complete degradation of toluene occurred on the Ag/α-Fe{sub 2}O{sub 3} surface. -- Abstract: In this work, hollow “spindle-like” α-Fe{sub 2}O{sub 3} nanoparticles were synthesized by a hydrothermal route. The Ag/α-Fe{sub 2}O{sub 3} catalyst was prepared based on the spindle-shaped α-Fe{sub 2}O{sub 3} with CTAB as the surfactant, which showed excellent photoelectric property and photocatalytic activity. The structural properties of these samples were systematically investigated by X-ray powder diffraction, scanning electronic microscopy, transmission electronic microscopy, energy-dispersive X-ray spectra, and UV–Vis diffuse reflectance spectroscopy techniques. The photo-induced charge separation in the samples was demonstrated by surface photovoltage measurement. The photocatalytic performances of the Ag/α-Fe{sub 2}O{sub 3} and α-Fe{sub 2}O{sub 3} samples were comparatively studied in the degradation of toluene under xenon lamp irradiation by in situ FTIR spectroscopy. Benzaldehyde and benzoic acid species could be observed on the α-Fe{sub 2}O{sub 3} surface rather than Ag/α-Fe{sub 2}O{sub 3} surface. The results indicate that the Ag/α-Fe{sub 2}O{sub 3} sample exhibited higher photocatalytic efficiency.

36 MATERIALS SCIENCE↗

Microstructure and photoluminescent properties of Sr{sub 2}SiO{sub 4}:Eu{sup 3+} phosphors with various NH{sub 4}Cl flux concentrations

Graphical abstract: This paper describes effects of NH{sub 4}Cl concentration on microstructural and luminescent characteristics of Sr{sub 2}SiO{sub 4}:Eu{sup 3+} phosphors using microwave assisted sintering at 1200 °C for 1 h. The results showed the improved photoluminescence properties of microwave sintered Sr{sub 2}SiO{sub 4}:Eu{sup 3+} phosphors by adding NH{sub 4}Cl flux. Highlights: ► NH{sub 4}Cl flux improved the luminescence properties of microwave sintered phosphors. ► The particle sizes were enlarged from 1 μm to 10 μm as the NH{sub 4}Cl flux was added. ► The maximum photoluminescence intensity was appeared as adding 1 wt% NH{sub 4}Cl flux. ► The decay times of Sr{sub 2}SiO{sub 4}:Eu{sup 3+} phosphors with NH{sub 4}Cl flux were around 2.47–2.52 ms. -- Abstract: In this paper, effect of NH{sub 4}Cl flux concentrations (0, 1, 2, 3 and 4 wt%) on the crystal structure, morphology and photoluminescent properties of Sr{sub 2}SiO{sub 4}:Eu{sup 3+} phosphors synthesized by a microwave sintering at 1200 °C for 1 h was investigated and discussed. X-ray powder diffraction analysis showed the crystal structure was not affected and the pure Sr{sub 2}SiO{sub 4} phase was formed without second phase or phases of starting materials when adding with the NH{sub 4}Cl flux. The SEM images indicated that increase of the NH{sub 4}Cl flux enlarged the particle size of the phosphor particles. The photo-luminescence results showed the addition of 1 wt% NH{sub 4}Cl flux much improved the emission intensity at λ{sub em} of 617 nm as the excitation spectrum at λ{sub ex} of 395 nm. The decay times of Sr{sub 2}SiO{sub 4}:Eu{sup 3+} phosphors with different NH{sub 4}Cl flux concentrations were obtained around 2.47–2.52 ms.

36 MATERIALS SCIENCE↗

Transformation from hollow carbon octahedra to compressed octahedra and their use in lithium-ion batteries

Graphical abstract: Schematic illustration of the transformation process from hollow carbon octahedra into deflated balloon-like compressed hollow carbon octahedra ▪. Highlights: ► We demonstrate the in situ template synthesis of hollow carbon octahedra. ► The shell thickness of hollow carbon octahedra is only 2.5 nm. ► Morphology transformation could be realized by extending of reaction time. ► The hollow structures show reversible capacity as 353 mAh g{sup −1} after 100 cycles. -- Abstract: Hollow carbon octahedra with an average size of 300 nm and a shell thickness of 2.5 nm were prepared by a reaction starting from ferrocene and Mg(CH{sub 3}COO){sub 2}·4H{sub 2}O at 700 °C for 10 h. They became compressed and turned into deflated balloon-like octahedra when the reaction time was increased to 16 h. It was proposed that the gas pressure generated during the reaction process induced the transformation from broken carbon hollow octahedra into deflated balloon-like compressed octahedra. X-ray powder diffraction and Raman spectroscopy indicate that the as-obtained carbon products possess a graphitic structure and high-resolution transmission electron microscopy images indicate that they have low crystallinity. Their application as an electrode shows reversible capacity of 353 mAh g{sup −1} after 100 cycles in the charge/discharge experiments of secondary lithium ion batteries.

36 MATERIALS SCIENCE↗

Neutron structural characterization, inversion degree and transport properties of NiMn{sub 2}O{sub 4} spinel prepared by the hydroxide route

Graphical abstract: A pure specimen has been synthesized by the hydroxide route. This spinel, studied by NPD, shows an important inversion degree, λ = 0.80. A bond-valence study shows that the tetrahedral Mn ions are divalent whereas the octahedral Mn and Ni are slightly oxidized from the expected 3+ and 2+ values, respectively. The mixed valence Mn{sup 3+}/Mn{sup 4+} accounts for a hopping mechanism between adjacent octahedral sites, leading to a significant conductivity. Highlights: ► A low-temperature hydroxide route allowed preparing almost pure specimens of NiMn{sub 2}O{sub 4}. ► NPD essential to determine inversion degree; contrasting Ni and Mn for neutrons. ► Bond valence establishes valence state of octahedral and tetrahedral Ni and Mn ions. ► Thermal analysis, transport measurements complement characterization of this oxide. ► A structure–properties relationship is established. -- Abstract: The title compound has been synthesized by the hydroxide route. The crystal structure has been investigated at room temperature from high-resolution neutron powder diffraction (NPD) data. It crystallizes in a cubic spinel structure, space group Fd3{sup ¯}m, Z = 8, with a = 8.3940(2) Å at 295 K. The crystallographic formula is (Ni{sub 0.202(1)}Mn{sub 0.798(1)}){sub 8a}(Ni{sub 0.790(1)}Mn{sub 1.210(1)}){sub 16d}O{sub 4} where 8a and 16d stand for the tetrahedral and octahedral sites of the spinel structure, respectively. There is a significant inversion degree of the spinel structure, λ = 0.80. In fact, the variable parameter for the oxygen position, u = 0.2636(4), is far from that expected (u = 0.25) for normal spinels. From a bond-valence study, it seems that the valence distribution in NiMn{sub 2}O{sub 4} spinel is not as trivial as expected (Ni{sup 2+} and Mn{sup 3+}), but clearly the tetrahedral Mn ions are divalent whereas the octahedral Mn and Ni are slightly oxidized from the expected +3 and +2 values, respectively. The mixed valence observed at the octahedral sites provides the charge carriers that, by a hopping mechanism between Mn{sup 3+}/Mn{sup 4+} adjacent sites, leads to a significant conductivity, up to 0.85 S cm{sup −1} at 800 °C in air.

36 MATERIALS SCIENCE↗

Effects of excitation wavelength and Y{sup 3+} content on luminescent properties of YMO{sub 4}:Dy{sup 3+} (M = V, P) phosphors induced by ultraviolet excitation

Highlights: ► The color temperature of YPO{sub 4}:Dy{sup 3+} phosphor can be controlled by changing excitation wavelength. ► Y{sub x}VO{sub 4}:Dy{sup 3+} phosphors were synthesized by chemical precipitation method. ► Little excessive Y{sup 3+} content can make body color of YVO{sub 4}:Dy{sup 3+} phosphor become white even if sintered above 1100 °C. -- Abstract: Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+}, Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} and Y{sub x}VO{sub 4}:0.01Dy{sup 3+} phosphors were synthesized by chemical co-precipitation method. All the samples were characterized by X-ray powder diffraction (XRD) and photoluminescence spectroscopy. XRD results show that the samples only have single tetragonal structure and the crystallinity of Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+} phosphor is higher than that of Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} phosphor when the heat treatment process is same. Photoluminescence excitation spectra results show that the Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+} and Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} phosphors can be efficiently excited by ultraviolet light from 250 nm to 380 nm, the former have a wide Dy{sup 3+}–O{sup 2−} charge transfer band ranging from 260 nm to 350 nm including a peak at 310 nm, the latter have four peaks at 294 nm, 326 nm, 352 nm and 365 nm. Emission spectra of all the samples exhibit a strong blue emission (483 nm) and another strong yellow emission (574 nm). Moreover, the yellow-to-blue emission intensity ratio and color temperature of emission of Dy{sup 3+} are strongly related to excitation wavelength in Y{sub 0.99}PO{sub 4}:0.01Dy{sup 3+} phosphor, but it is almost not in Y{sub 0.99}VO{sub 4}:0.01Dy{sup 3+} phosphor. For Y{sub x}VO{sub 4}:0.01Dy{sup 3+} (x = 0.94, 0.97, 0.99, 1.01, 1.03) phosphors, with increasing value of x, the body color of phosphor changes from yellow to white and the strongest peak in excitation spectra shifts a little to shorter wavelength. It is detrimental to luminous intensity when Y{sup 3+} content deviate stoichiometric ratio, but the influence of Y{sup 3+} on the color temperature of emission of YVO{sub 4}:Dy{sup 3+} phosphor is slight.

36 MATERIALS SCIENCE↗

Room temperature oxidative intercalation with chalcogen hydrides: Two-step method for the formation of alkali-metal chalcogenide arrays within layered perovskites

Highlights: ► Topochemical reactions involving intercalation allow construction of metal chalcogenide arrays within perovskite hosts. ► Gaseous chalcogen hydrides serve as effect reactants for intercalation of sulfur and selenium. ► New compounds prepared by a two-step intercalation strategy are presented. -- Abstract: A two-step topochemical reaction strategy utilizing oxidative intercalation with gaseous chalcogen hydrides is presented. Initially, the Dion-Jacobson-type layered perovskite, RbLaNb{sub 2}O{sub 7}, is intercalated reductively with rubidium metal to make the Ruddlesden-Popper-type layered perovskite, Rb{sub 2}LaNb{sub 2}O{sub 7}. This compound is then reacted at room-temperature with in situ generated H{sub 2}S gas to create Rb-S layers within the perovskite host. Rietveld refinement of X-ray powder diffraction data (tetragonal, a = 3.8998(2) Å, c = 15.256(1) Å; space group P4/mmm) shows the compound to be isostructural with (Rb{sub 2}Cl)LaNb{sub 2}O{sub 7} where the sulfide resides on a cubic interlayer site surrounded by rubidium ions. The mass increase seen on sulfur intercalation and the refined S site occupation factor (∼0.8) of the product indicate a higher sulfur content than expected for S{sup 2−} alone. This combined with the Raman studies, which show evidence for an H-S stretch, indicate that a significant fraction of the intercalated sulfide exists as hydrogen sulfide ion. Intercalation reactions with H{sub 2}Se{sub (g)} were also carried out and appear to produce an isostructural selenide compound. The utilization of such gaseous hydride reagents could significantly expand multistep topochemistry to a larger number of intercalants.

36 MATERIALS SCIENCE↗

Effect of metal ions (Sn and Zn) on the thermal property of akaganeite nanorods

Graphical abstract: Compared with β-FeOOH and Zn doped β-FeOOH, the thermal stability of tin doped β-FeOOH increases both in solution and air. Zn and Sn ions doping favor the formation of rod like shape β-FeOOH. Highlights: ► The addition of tin ions increases the thermal stability of β-FeOOH nanorods both in solution and air. ► Tin ions doped β-FeOOH nanorods show higher decomposition temperature (ΔT = 200 °C). ► The presence of tin and zinc ions is favor of the formation of rod like shape. -- Abstract: The electrical, optical, and adsorption properties of akaganeite (β-FeOOH) can be modified by doping or combining with variety of elements. We prepared metal ions (Sn, Zn) doped β-FeOOH using β-FeOOH nanorods as the precursor by the hydrothermal method and investigated the effect of metal ions (Sn, Zn) on the thermal property of β-FeOOH nanorods. The doping of metal ions (Sn, Zn) was confirmed by X-ray powder diffraction, energy dispersive spectroscopy, and atomic emission spectrometer analysis. Thermogravimetric analysis and differential thermal analysis showed that they have different thermal decomposition temperatures. β-FeOOH nanorods and Zn doped β-FeOOH nanorods were transformed into α-Fe{sub 2}O{sub 3} particles at 400 °C. While Sn doped β-FeOOH nanorods should be heated to higher temperature (600 °C). Sn doped β-FeOOH nanorods showed higher thermal stability due to the Sn ions binding with the framework of β-FeOOH. Both Sn and Zn ions doped β-FeOOH remained the rod like shape.

36 MATERIALS SCIENCE↗