Search NASA⌕ Search

SEARCH · Search NASA

Results for “sampling variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SB10 Frit Recommendation, and Evaluations of the Glass Variability Study and Cs-137 Concentrations in Strip Effluent Based on May 2021 Projections

The Defense Waste Processing Facility (DWPF) is currently preparing to initiate processing of Sludge Batch 10 (SB10), which is comprised of material from Tanks 11H, 13H, 15H, and 26F, Alternate Feed Stock-2 (AFS-2) and Sodium Reactor Experiment (SRE) material from H-Canyon. In support of SB10 qualification, frit development using 2020 Tank 40 blend projections and experimental work for the glass variability study were previously conducted. Frit 473 and Frit 209 were identified as candidate frits and both were included in the development of the variability study test matrix; however, a final frit recommendation was postponed until more information could be determined about the composition of SB10 after washing. In May 2021, Savannah River Remediation (SRR) reprojected SB10 based on the analytical results from the Tank 51 qualification sample that was washed in the Savannah River National Laboratory (SRNL) Shielded Cells Facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2018

Bisphenol-A in breast adipose tissue of breast cancer cases and controls

Highlights: • BPA was detected in breast adipose tissue of breast cancer cases and controls. • Mean BPA concentrations were similar between cases and controls. • BPA concentrations were highly variable within- and between-breasts from a single patient. We evaluated whether bisphenol-A (BPA) could be quantified in breast adipose tissue samples provided by 36 breast cancer mastectomy patients and 14 reduction mammoplasty patients. Samples of breast adipose tissue were collected and BPA concentration was quantified using HPLC-ESI-MS/MS. BPA was detectable above the limit of quantitation of 0.38 ng/g in 30.6% of samples. BPA concentrations varied within- and between breasts and were similar between cases and controls (0.39 vs 0.41 ng/g, p = 0.74).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Impacts of caking on corn stover – An assessment of moisture content and consolidating pressure

Caking or time consolidation of powders is a serious problem which can hinder productivity and overall feasibility of various industrial processes. Here this study focuses on the impacts moisture content and consolidating pressures can have on 2 mm corn stover samples after undergoing a drying treatment at different times. Individually, moisture content and consolidating pressure did not exhibit any significant changes throughout the modified variable flow rate tests using the FT4 powder rheometer. However, applying both variables simultaneously yielded higher-than-usual energy outputs from the corn stover, indicative of biomass agglomeration due to the moisture and its subsequent evaporation while under pressure via the induced consolidating pressure. However, despite the increase in energy usage, time dried did not have a direct effect and demonstrated no trend.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural Insights into the Vapochromic Behavior of Pt- and Pd-Based Compounds

Anionic complexes having vapochromic behavior are investigated: [K(H 2 O)][M(ppy)(CN) 2 ], [K(H 2 O)][M(bzq)(CN) 2 ], and [Li(H 2 O) n ][Pt(bzq)(CN) 2 ], where ppy = 2-phenylpyridinate, bzq = 7,8-benzoquinolate, and M = Pt(II) or Pd(II). These hydrated potassium/lithium salts exhibit a change in color upon being heated to 380 K, and they transform back into the original color upon absorption of water molecules from the environment. The challenging characterization of their structure in the vapochromic transition has been carried out by combining several experimental techniques, despite the availability of partially ordered and/or impure crystalline material. Room-temperature single-crystal and powder X-ray diffraction investigation revealed that [K(H 2 O)][Pt(ppy)(CN) 2 ] crystallizes in the Pbca space group and is isostructural to [K(H 2 O)][Pd(ppy)(CN) 2 ]. Variable-temperature powder X-ray diffraction allowed the color transition to be related to changes in the diffraction pattern and the decrease in sample crystallinity. Water loss, monitored by thermogravimetric analysis, occurs in two stages, well separated for potassium Pt compounds and strongly overlapped for potassium Pd compounds. Furthermore, the local structure of potassium compounds was monitored by in situ pair distribution function (PDF) measurements, which highlighted changes in the intermolecular distances due to a rearrangement of the crystal packing upon vapochromic transition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nonlinear quantum interferometric spectroscopy with entangled photon pairs

Here, we develop closed expressions for a time-resolved photon counting signal induced by an entangled photon pair in an interferometric spectroscopy setup. Superoperator expressions in Liouville-space are derived that can account for relaxation and dephasing induced by coupling to a bath. Interferometric setups mix matter and light variables non-trivially, which complicates their interpretation. We provide an intuitive modular framework for this setup that simplifies its description. Based on the separation between the detection stage and the light–matter interaction processes, we show that the pair entanglement time and the interferometric time-variables control the observed physics time scale. Only a few processes contribute in the limiting case of small entanglement time with respect to the sample response, and specific contributions can be singled out.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-precision vapor pressure measurement apparatus with facile and inexpensive construction

This study describes an apparatus for high-precision variable temperature measurement of liquid vapor pressure. The apparatus can be used to measure the vapor pressure using only 0.5 ml of the liquid sample. To evaluate the accuracy of the device measurement, water and 2-propanol are utilized as standard liquids, and their vapor pressure is measured with a maximum uncertainty of ~1%. This apparatus can be replicated using inexpensive and commonly used laboratory fittings and fixtures, making it an indispensable tool for synthetic chemists and chemical engineers involved in the iterative synthesis of compounds, targeting different vapor–liquid equilibrium regimes.

Engineering↗
DOE OSTI2023

Evaluation of Electron Tomography Capabilities for Shale Imaging

Despite the advantageous resolution of electron tomography (ET), reconstruction of three-dimensional (3D) images from multiple two-dimensional (2D) projections presents several challenges, including small signal-to-noise ratios, and a limited projection range. This study evaluates the capabilities of ET for thin sections of shale, a complex nanoporous medium. A numerical phantom with 1.24 nm pixel size is constructed based on the tomographic reconstruction of a Barnett shale. A dataset of 2D projection images is numerically generated from the 3D phantom and studied over a range of conditions. First, common reconstruction techniques are used to reconstruct the shale structure. The reconstruction uncertainty is quantified by comparing overall values of storage and transport metrics, as well as the misclassification of pore voxels compared to the phantom. We then select the most robust reconstruction technique and we vary the acquisition conditions to quantify the effect of artifacts. We find a strong agreement for large pores over the different acquisition workflows, while a wider variability exists for nanometer-scale features. Furthermore, the limited projection range and reconstruction are identified as the main experimental bottlenecks, thereby suggesting that sample thinning, advanced holders, and advanced reconstruction algorithms offer opportunities for improvement.

3D scanning transmission electron microscopy↗
DOE OSTI2020

Calibrating the BHB star distance scale and the halo kinematic distance to the Galactic Centre

ABSTRACT We report the first determination of the distance to the Galactic Centre based on the kinematics of halo objects. We apply the statistical-parallax technique to the sample of ∼2500 blue horizontal branch (BHB) stars compiled by Xue et al. to simultaneously constrain the correction factor to the photometric distances of BHB stars as reported by those authors and the distance to the Galactic Centre to find R = 8.2 ± 0.6 kpc. We also find that the average velocity of our BHB star sample in the direction of Galactic rotation, V0 = −240 ± 4 km s−1, is greater by about 20 km s−1 in absolute value than the corresponding velocity for halo RR Lyrae type stars (V0 = −222 ± 4 km s−1) in the Galactocentric distance interval from 6 to 18 kpc, whereas the total (σV) and radial (σr) velocity dispersion of the BHB sample are smaller by about 40–45 km s−1 than the corresponding parameters of the velocity dispersion ellipsoid of halo RR Lyrae type variables. The velocity dispersion tensor of halo BHB stars proved to be markedly less anisotropic than the corresponding tensor for RR Lyrae type variables: the corresponding anisotropy parameter values are equal to βBHB = 0.51 ± 0.02 and βRR = 0.71 ± 0.03, respectively.

Utkin, Nikita D.↗
DOE OSTI2015

Experimental climate warming alters aspen and birch phytochemistry and performance traits for an outbreak insect herbivore

Abstract Climate change and insect outbreaks are key factors contributing to regional and global patterns of increased tree mortality. While links between these environmental stressors have been established, our understanding of the mechanisms by which elevated temperature may affect tree–insect interactions is limited. Using a forest warming mesocosm, we investigated the influence of elevated temperature on phytochemistry, tree resistance traits, and insect performance. Specifically, we examined warming effects on forest tent caterpillar ( Malacosoma disstria ) and host trees aspen ( Populus tremuloides ) and birch ( Betula papyrifera ). Trees were grown under one of three temperature treatments (ambient, +1.7 °C, +3.4 °C) in a multiyear open‐air warming experiment. In the third and fourth years of warming (2011, 2012), we assessed foliar nutrients and defense chemistry. Elevated temperatures altered foliar nitrogen, carbohydrates, lignin, and condensed tannins, with differences in responses between species and years. In 2012, we performed bioassays using a common environment approach to evaluate plant‐mediated indirect warming effects on larval performance. Warming resulted in decreased food conversion efficiency and increased consumption, ultimately with minimal effect on larval development and biomass. These changes suggest that insects exhibited compensatory feeding due to reduced host quality. Within the context of observed phytochemical variation, primary metabolites were stronger predictors of insect performance than secondary metabolites. Between‐year differences in phytochemical shifts corresponded with substantially different weather conditions during these two years. By sampling across years within an ecologically realistic and environmentally open setting, our study demonstrates that plant and insect responses to warming can be temporally variable and context dependent. Results indicate that elevated temperatures can alter phytochemistry, tree resistance traits, and herbivore feeding, but that annual weather variability may modulate warming effects leading to uncertain consequences for plant–insect interactions with projected climate change.

Jamieson, Mary A.↗
DOE OSTI2018

The Imry–Ma Phase in a Nanocrystalline Ferromagnet

A possibility of appearing a disordered Imry–Ma state induced by fluctuations of the anisotropy easy axis direction in a nanocrystalline sample in the case of a weak exchange interaction between crystallites has been studied. A phase diagram of the system has been built in variables “the characteristic crystallite size–the exchange integral of the intercrystallite interaction.” The characteristic value of statistic fluctuations of the crystallographic anisotropy has been estimated, and the dependences of the coercive field on the crystallite size have been found for systems of various space dimensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

In-Pile Fuel Rod Deformation Measurements Using Miniaturized LVDT Technology

Different types of materials are being considered for fuel, cladding, and structures in existing and advanced nuclear reactors. These materials can undergo significant dimensional changes during irradiation. Currently in the US, such changes are measured with the ‘cook and look’ method (i.e. repeatedly irradiating a specimen for a specified period of time, and then removing it from the reactor for evaluation) – which leads to costly and time consuming experiments. In addition, such techniques provide limited data, and handling may disturb the phenomena of interest. Therefore, in-pile detection of geometric changes is needed to understand real-time behavior during irradiation testing of fuels and materials in high flux US Material and Test Reactors (MTRs). The developmental results of an advanced Linear Variable Differential Transformer (LVDT)-based test rig capable of detecting real-time changes in diameter or length of fuel rods or other material samples during irradiation in US MTRs are presented. The LVDT is being developed at the Idaho National Laboratory (INL), and will provide experimenters with the capability to measure dimensional changes associated with fuel and clad swelling, pellet-clad interaction, and crud buildup. The LVDT design utilizes the MTR’s loop pressure to drive the test specimen at a constant rate. This leads to a simplified construction which only requires three pressure boundary penetrations. Further, the LVDT pressure boundary is a leak tight hydraulic ram capable of actuating under low differential pressure (e.g. 1 psid), and is able to survive the high irradiation tests at Pressurized Water Reactor (PWR) conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Collaborative Research: Improved Efficiency and Coupling of the Radiation Code in the ACME Earth System Model (Final Report)

The complexity of radiative transfer, its importance to the exchange of energy in the climate system, and its high computational cost establishes importance of an accurate and efficient radiative transfer parameterization for climate simulation. Previous work by the proposing team at AER led to the development of the radiation code, RRTMG, which has been widely accepted by the global modeling community as a fast and accurate advancement over the previous generation of radiation codes. It has been in use in the NCAR CESM for many years, and it has been implemented in the initial version the DOE E3SM model. However, its computational cost remains high relative to other components in part due to its complexity and to its inefficient use of modern optimization strategies, and this project helped address this limitation for the code’s application in E3SM. Under other funding, the Investigators of this project led an effort to develop a high-performance broadband radiation code, called RTE+RRTMGP, which is a completely restructured code that will take advantage of modern computational capabilities to enhance its performance while retaining the strengths and accuracy of the original code. Designed to perform over a range of computer architectures, RTE+RRTMGP makes extensive use of Fortran 2003 features to improve both its efficiency and its use of memory. RTE+RRTMGP is expected to be adopted in the next generation of RTE+RRTMGP. This project allowed for advancements to the code’s computational capabilities and adding new and enhanced features. This included revising RTE+RRTMGP to run on GPU processors, analysis of and improvements to the code’s timing, modifying the gas optics in RRTMGP to increase the code’s accuracy, extensive validation of computed fluxes, heating rates and forcings, generating a cloud optical property and vertical sampling capabilities for RTE+RRTMGP, implementing a fast and accurate longwave scattering capability, and groundwork for the inclusion of a capability to specify solar variability. Many of the accomplishment in this project necessitated significant collaboration with the E3SM development team. The result of this project was optimization of a key physical component (radiative transfer calculations) of E3SM, directly supporting E3SM’s overarching global modeling objectives. More broadly, this project provided overall advancements in the use of radiative transfer calculations in atmospheric modeling and simulation, particularly for climate.

58 GEOSCIENCES↗
DOE OSTI2020

A software package for modeling and simulating fault graphs

This report describes a novel fault graph modeling language and a simulation tool for executing models specified in the language. The modeling language has three primary features that distinguish it from similar reliability analysis tools. These are (1) a random variable modeling several distinct outcomes of a single fault; (2) chains of faults in which one fault triggers another; and (3) time to fail sampled from probability distributions including positive normal, exponential, Weibull with a minimum, or immediate. These features are motivated by their use in a historical analysis of centrifuge reliability.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Multiscale Shear Properties and Flow Performance of Milled Woody Biomass

One dominant challenge facing the development of biorefineries is achieving consistent system throughput with highly variant biomass feedstock quality and handling performance. Current handling unit operations are adapted from other sectors (primarily agriculture), where some simplifying assumptions about granular mechanics and flow performance do not translate well to a highly compressible and anisotropic material with nonlinear time- and stress-dependent properties. This work explores the shear and frictional properties of loblolly pine at multiple experimental test apparatus and particle scales to elucidate a property window that defines the shear behavior over a range of material attributes (particle size, size distribution, moisture content, etc.). In general, it was observed that the bulk internal friction and apparent cohesion depend strongly on both the stress state of the sample in granular shear testers and the overall particle size and distribution span. For equipment designed to characterize the quasi-static shear stress failure of bulk materials ranging from 50 to 1,000 ml in test volume, similar test results were observed for finely milled particles (50% passing size of 1.4 mm) with a narrow size distribution (span between 10 and 90% passing size of 0.9 mm), while stress chaining and over-torque issues persisted for the bench-scale test apparatus for larger particle sizes or widely dispersed sample sizes. Measurement of the anisotropic particle–particle friction ranged from coefficients of approximately 0.20 to 0.45 and resulted in significantly higher and more variable friction measurements for larger particle sizes and in perpendicular alignment orientations. To supplement these laboratory-scale properties, this work explores the flow of loblolly pine and Douglas fir through a pilot-scale wedge-shaped hopper and a screw feeder. For the gravity-driven hopper flow, the critical arching distance and mass discharge rate ranged from approximately 10 to 30 mm and 2 to 16 tons/hour, respectively, for both materials, where the arching distance depends strongly on the overall particle size and depends less on the hopper inclination angle. Comparatively, the auger feeder was found to be much more impacted by the size of the particles, where smaller particles had a more consistent and stable flow while consuming less power.

09 BIOMASS FUELS↗
DOE OSTI2023

National Prevalence of Caprine Prion Protein Genetic Variability at Codons 146, 211, and 222 in Goat Herds in the United States

Scrapie is a neurodegenerative disease that impacts sheep and goats, characterized by gradual and progressive changes in neurological function. Recent research shows that the scrapie incubation period is significantly influenced by specific variations in amino acids within the prion protein gene (PRNP). The objective of this study was to estimate the national prevalence of caprine PRNP genetic variability at codons 146, 211, and 222 in goat populations across the United States. A total of 3052 blood, ear tissue, and brain tissue samples were collected from goats from 50 states. The participating states were categorized into four Veterinary Service (VS) district regions. The samples underwent DNA extraction, and the PRNP variants corresponding to codons 146, 211, and 222 were amplified and sequenced. The analysis of PRNP variants, when compared to the PRNP reference sequence, revealed seven alleles in twelve genotypes. The homozygous 146NN, 211RR, and 222QQ alleles, which have been linked to an increased risk of scrapie, were found to be the most prevalent among all the goats. The heterozygous 222QK, 211RQ, 146SD, 146ND, and 146NS alleles and the homozygous 222KK, 146SS, and 146DD alleles, known to be associated with reduced scrapie susceptibility and a prolonged incubation period after experimental challenge, were found in 1.098% (222QK), 2.33% (211RQ), 0.58% (146SD), 3.13% (146ND), 20.68% (146NS), 0.005% (222KK), 3.31% (146SS), and 0.67% (146DD) of goats, respectively. The 222QK allele was found most frequently in goats tested from the east (VS District 1, 1.59%) and southwest (VS District 4, 1.08%) regions, whereas the 211RQ allele was found most often in goats tested from the Midwest (VS District 2, 8.03%) and east (VS District 1, 6.53%) regions. The 146NS allele was found most frequently in goats tested from the northwest (VS District 3, 29.02%) and southwest (VS District 4, 20.69%) regions. Our results showed that the prevalence of less susceptible genotypes at PRNP codon 146 may be sufficient to use genetic susceptibility testing in some herds. This may reduce the number of goats removed as part of a herd clean-up plan and may promote the selective breeding goats for less susceptible alleles in high-risk herds at the national level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

In-pile measurements of fuel rod dimensional changes utilizing the test reactor loop pressure for motion - 359

Different types of materials are being considered for fuel, cladding, and structures in existing and advanced nuclear reactors. These materials can undergo significant dimensional changes during irradiation. Currently in the US, such changes are measured with the 'cook and look' method (i.e. repeatedly irradiating a specimen for a specified period of time, and then removing it from the reactor for evaluation) - which leads to costly and time consuming experiments. In addition, such techniques provide limited data, and handling may disturb the phenomena of interest. Therefore, in-pile detection of geometric changes is needed to understand real-time behavior during irradiation testing of fuels and materials in high flux US Material and Test Reactors (MTRs). The developmental results of an advanced Linear Variable Differential Transformer (LVDT)-based test rig capable of detecting real-time changes in diameter or length of fuel rods or other material samples during irradiation in US MTRs are presented. The LVDT is being developed at the Idaho National Laboratory (INL), and will provide experimenters with the capability to measure dimensional changes associated with fuel and clad swelling, pellet-clad interaction, and crud buildup. The LVDT design utilizes the MTR's loop pressure to drive the test specimen at a constant rate. This leads to a simplified construction which only requires three pressure boundary penetrations. Further, the LVDT pressure boundary is a leak tight hydraulic ram capable of actuating under low differential pressure (e.g. 1 psid), and is able to survive the high irradiation tests at Pressurized Water Reactor (PWR) conditions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Fault Graph (fg)

This software package offers a novel fault graph modeling language and a simulation tool for executing models specified in the language. The modeling language has three primary features that distinguish it from similar reliability analysis tools. These are (1) a random variable modeling several distinct outcomes of a single fault; (2) chains of faults in which one fault triggers another; and (3) time to fail sampled from probability distributions including positive normal, exponential, Weibull with a minimum, or immediate.

Nutaro, James↗
DOE OSTI2017

Multiwavelength Variability Study of the Classical BL Lac Object PKS 0735+178 on Timescales Ranging from Decades to Minutes

We present the results of our power spectral analysis for the BL Lac object PKS 0735+178, utilizing the Fermi -LAT survey at high-energy γ -rays, several ground-based optical telescopes, and single-dish radio telescopes operating at GHz frequencies. The novelty of our approach is that, by combining long-term and densely sampled intra-night light curves in the optical regime, we were able to construct for the first time the optical power spectrum of the blazar for a time domain extending from 23 years down to minutes. Our analysis reveals that: (1) the optical variability is consistent with a pure red noise, for which the power spectral density can be well approximated by a single power law throughout the entire time domain probed; (2) the slope of power spectral density at high-energy γ -rays (∼1) is significantly flatter than that found at radio and optical frequencies (∼2) within the corresponding time variability range; (3) for the derived power spectra, we did not detect any low-frequency flattening, nor do we see any evidence for cutoffs at the highest frequencies down to the noise floor levels due to measurement uncertainties. We interpret our findings in terms of a model where the blazar variability is generated by the underlying single stochastic process (at radio and optical frequencies), or a linear superposition of such processes (in the γ -ray regime). Along with the detailed PSD analysis, we also present the results of our extended (1998–2015) intra-night optical monitoring program and newly acquired optical photo-polarimetric data for the source.

79 ASTRONOMY AND ASTROPHYSICS↗