Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Band alignment at the Cu{sub 2}ZnSn(S{sub x}Se{sub 1-x}){sub 4}/CdS interface

Energy band alignments between CdS and Cu{sub 2}ZnSn(S{sub x}Se{sub 1-x}){sub 4} (CZTSSe) grown via solution-based and vacuum-based deposition routes were studied as a function of the [S]/[S+Se] ratio with femtosecond laser ultraviolet photoelectron spectroscopy, photoluminescence, medium energy ion scattering, and secondary ion mass spectrometry. Band bending in the underlying CZTSSe layer was measured via pump/probe photovoltage shifts of the photoelectron spectra and offsets were determined with photoemission under flat band conditions. Increasing the S content of the CZTSSe films produces a valence edge shift to higher binding energy and increases the CZTSSe band gap. In all cases, the CdS conduction band offsets were spikes.

36 MATERIALS SCIENCE↗

Highly Emissive Transition Metal Ion Doped Semiconducting Nanocrystals

Doped semiconductor nanocrystals (d-dots), specifically ones not containing heavy metal ions, have the potential to become a class of mainstream emissive materials. Mn- and Cu-doped ZnSe or ZnS d-dots can cover an emission window similar to that of the current workhorse of intrinsic quantum dot (q-dots) emitters, CdSe nanocrystals. We synthesized high quality stable Cu doped ZnSe in nonpolar as well as polar solvent. The emission intensity of these doped nanocrystals is found stable for months under UV irradiation, after different multifunctional ligand which is important for any biological detection. We have also synthesized the stable Mn doped ZnS in nonpolar solvent more than 50% QY.. The doped nanocrystals are characterized by TEM, XRD, EPR and ICP analysis.

36 MATERIALS SCIENCE↗

SHI Induced Modifications in CdS/CuInSe{sub 2} Thin Film: XRD Analysis

CuInSe{sub 2}(CIS nanostructured) thin films were prepared by ion exchange method at room temperature on ITO coated glass substrates in an alkaline medium. The as prepared thin films were irradiated by 120 MeV Au{sup 9+} swift heavy ion (SHI) at 5x10{sup 11} and 5x10{sup 12} ions/cm{sup 2} fluence respectively. To study the effect of irradiation, the pristine and irradiated nanostructured thin films were characterized by X ray Diffraction (XRD) and analyzed the improvement in crystalline quality and crystallite size. The observed structural modifications discussed considering the high electronic energy deposition by 120 MeV gold heavy (Au{sup 9+}) ions in CuInSe{sub 2} thin films.

36 MATERIALS SCIENCE↗

Theoretical Investigations of Electronic Properties of Se{sub 82-x}Bi{sub x}Te{sub 18} Thin Films

The effect of Bi on the structural and optical properties of Se{sub 82-x}Bi{sub x}Te{sub 18} glassy alloys is studied, theoretically. Cohesive energy is calculated by using chemical bond approach and is found to decrease with increasing Bi content. Optical band gap of thin films is calculated by Shimakawa's relation. The optical band gap decreases with increase in Bi content.

36 MATERIALS SCIENCE↗

Heat Capacity And Structural Relaxation In Se{sub 80-x}Te{sub 20}Ag{sub x}(x = 3 and 9) Glassy Alloys

This paper reports the effects of annealing time and temperature on the thermodynamics of enthalpy relaxation of Se{sub 80-x}Te{sub 20}Ag{sub x} (x = 3,9) glasses. Differential Scanning Calorimetry (DSC) method is optimized for the measurement of enthalpy relaxation in the vicinity of glass transition. The recovery of excess enthalpy ({Delta}H{sub excess}) has been calculated from the knowledge of excess specific heat ({Delta}C{sub p}). It is found that excess enthalpy released ({Delta}H{sub excess}) increase with increase in annealing time (t{sub a}). From the knowledge of excess specific heat ({Delta}C{sub p}) and {Delta}H{sub excess}, it has been found that sub-T{sub g} annealing of glass leads to decrease in enthalpy of the system and thereby taking it to the more equilibrium state.

36 MATERIALS SCIENCE↗

Thermal studies of Se{sub 85-x}Te{sub 15}In{sub x} (x = 3,6,9,12) glasses

Bulk glasses of compositions Se{sub 85-x}Te{sub 15}In{sub x} (x = 3,6,9,12) are prepared by melt quenching technique and Differential scanning calorimetry (DSC) is employed to study the thermal stability, crystallization mechanism as well as specific heat of these glasses. It is found that the addition of indium increases the glass transition temperature. From the heating rate dependence of the glass transition temperature the activation energy of glass transition is determined using Kissinger's equation for non-isothermal crystallization of materials. An attempt has been made to explain the variation in the value of T{sub c}, T{sub p} and {Delta}C{sub p} for the composition Se{sub 73}Te{sub 15}In{sub 12} using rigidity percolation threshold (RPT). From the values of (T{sub c}-T{sub g}) the stable glass system is determined.

36 MATERIALS SCIENCE↗

Studies Concerning the Accumulation of Minerals and Heavy Metals in Fruiting Bodies of Wild Mushrooms

The minerals and heavy metals play an important role in the metabolic processes, during the growth and development of mushrooms, when they are available in appreciable concentration. In this work the concentrations of Cr, Mn, Fe, Ni, Cu, Zn, Se, Cd and Pb were analyzed using the Flame Atomic Absorption spectrometry (FAAS) together with Energy Dispersive X-ray Fluorescence spectrometry (EDXRF) in 3 wild mushrooms species and their growing substrate, collected from various forestry fields in Dambovita County, Romania. The analyzed mushrooms were: Amanita phalloides, Amanita rubescens and Armillariella mellea. The accumulation coefficients were calculated to assess the mobility of minerals and heavy metals from substrate to mushrooms [1].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-Ideal p-n junction Diode of Sb{sub x}Se{sub 1-x}(x = 0.4, 0.5, 0.6, 0.7) Thin Films

We have made diodes consisting of the same alloy i.e. Sb{sub x}Se{sub 1-x}(x = 0.4, 0.5, 0.6 and 0.7), but change the concentration of Sb metal from 40% to 70% atomic weight percentage. It is observed from the Hall measurements that the nature of charge carriers have changed from p- to n-type at x = 0.6 for Sb{sub x}Se{sub 1-x}. We have measured I-V characteristics of four p-n junction diodes i.e. p-Sb{sub 2}Se{sub 3}/n-Sb{sub 3}Se{sub 2}, p-Sb{sub 2}Se{sub 3}/n-Sb{sub 7}Se{sub 3}, p-SbSe/n-Sb{sub 3}Se{sub 2}, p-SbSe/n-Sb{sub 7}Se{sub 3}. From the I-V plots we have calculated the parameters as built-in voltage (V{sub bi}), forward resistance (R{sub f}), ideal factor (n), saturation current (I{sub o}), breakdown current (I{sub Bd}) and breakdown voltage (V{sub Bd}).

36 MATERIALS SCIENCE↗

Study of Some Physical Properties of Se{sub 30}Te{sub 70-x}Sn{sub x} Glasses

In the present work the effect of Sn doping on the physical properties of, tellurium rich, Se{sub 30}Te{sub 70-x}Sn{sub x} system is studied theoretically. The average coordination number, constraints, lone pair electrons and heat of atomization for Se{sub 30}Te{sub 70-x}Sn{sub x} system are calculated for x = 0,1.5,2.5,5.5 using the well defined relations. The present study shows that the values of lone pair electrons and average single bond energy goes on decreasing with increasing Sn content whereas the average coordination number, constraints and heat of atomization increases with increase in the Sn content.

36 MATERIALS SCIENCE↗

Electronic and mechanical properties of ZnX (X = S, Se and Te)--An ab initio study

Zinc chalcogenides (ZnX, X = S, Se and Te) have been increasing attention as wide and direct band gap semiconductor for blue and ultraviolet optical devices. This paper analyzes electronic and mechanical properties of these materials by ab initio pseudo-potential method that uses non conserving pseudopotentials in fully nonlocal form, as implemented in SIESTA code. In this approach the local density approximation (LDA) is used for the exchange-correlation (XC) potential. The calculations are given for band gap, elastic constants (C{sub 11}, C{sub 12} and C{sub 44}), shear modulus, and Young's modulus. The results are in very good agreement with previous theoretical calculations and available experimental data.

36 MATERIALS SCIENCE↗

Photodarkening Effect in a-(GaSe){sub 90}Ag{sub 10} Thin Films

The present paper reports the laser induced changes on the optical properties of a-(GaSe){sub 90}Ag{sub 10} thin films prepared by thermal evaporation technique. Thin film samples, on glass substrate, were exposed to laser light of wavelength {lambda} = 532 nm for different exposure times, t{sub E}(t{sub E}=0{sub s}, 500 s, 1000 s and 3000 s). Optical parameters like absorption coefficient and optical energy gap of as- deposited thin film and their laser induced changes were studied at three different times of exposure. The value of absorption coefficient of these thin film increases on exposing the film to laser irradiation. The optical absorption edge shift to lower photon energy i.e. the Photodarkening (PD) effect occurs. The results have been explained on the basis of structural changes that are occurring after the laser irradiation.

36 MATERIALS SCIENCE↗

Structural properties of Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} topological insulators grown by molecular beam epitaxy on GaAs(001) substrates

Thin films of Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} have been grown on deoxidized GaAs(001) substrates using molecular beam epitaxy. Cross-sectional transmission electron microscopy established the highly parallel nature of the Te(Se)-Bi-Te(Se)-Bi-Te(Se) quintuple layers deposited on the slightly wavy GaAs substrate surface and the different crystal symmetries of the two materials. Raman mapping confirmed the presence of the strong characteristic peaks reported previously for these materials in bulk form. The overall quality of these films reveals the potential of combining topological insulators with ferromagnetic semiconductors for future applications.

36 MATERIALS SCIENCE↗

Optical Probing of metamagnetic phases in epitaxial EuSe

EuSe is a wide gap magnetic semiconductors with a potential for applications in proof-of-concept spintronic devices. When the temperature is lowered, EuSe goes through sharp transitions between a variety of magnetic phases and is thus described as metamagnetic. The purpose of the present investigation is to correlate the magnetic order to the sharp dichroic doublet, discovered recently in high quality thin epitaxial layers of EuSe, grown by molecular beam epitaxy. We report detailed measurements of the doublet positions and intensities as a function of magnetic field in low temperatures, covering several magnetic phases.

36 MATERIALS SCIENCE↗

Challenges for a reliable shell model description of the neutrinoless double beta decay matrix elements

Assuming that the neutrinos are Majorana particles and the neutrinoless double beta (0{nu}{beta}{beta}) decay is observed, a reliable 0{nu}{beta}{beta} matrix element is necessary to decide the neutrino mass hierarchy and the minimum neutrino mass. Many nuclear structure techniques, including the shell model, are presently used to calculate these matrix elements. In the last few years one could see a slow convergence of these results, but not yet at a level of 20 several shell model effective interactions and varying other parameters, finding results in a range that spans about 20In this contribution we describe challenges for obtaining reliable shell model 0{nu}{beta}{beta} matrix elements, with emphasis to {sup 76}Ge and {sup 82}Se decays.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

On the discrimination of different mechanisms for 0{nu}2{beta} decay

Nuclear matrix elements (NME) for 0{nu}{beta}{beta} decay are calculated in four candidate nuclei ({sup 76}Ge, {sup 82}Se, {sup 100}Mo, {sup 130}Te) within the quasiparticle random phase approximation (QRPA) and its variants. We assume up to four coexisting mechanisms for 0{nu}2{beta} decay, mediated by light Majorana neutrino exchange ({nu}), heavy Majorana neutrino exchange (N), R-parity breaking supersymmetry (Re), and squark-neutrino (q-tilde), interfering either constructively or destructively with each other. With simple algebraic techniques we show that, by changing the NME within the QRPA variants, the relative contribution of each mechanism to the decay amplitude changes dramatically, even assuming accurate measurements of decay lifetimes. As a consequence, the considered 0{nu}{beta}{beta} mechanisms are nearly degenerate from a phenomenological viewpoint. We discuss implications of such degeneracy on prospective searches for absolute neutrino masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The NEMO-3 results after completion of data taking

The double beta decay experiment NEMO-3 has compleated data taking in January 2011. The aim of the experiment is to search for the neutrinoless double beta decay and investigate the two-neutrino double beta decay in seven different isotopes ({sup 100}Mo, {sup 82}Se, {sup 116}Cd, {sup 150}Nd, {sup 96}Zr, {sup 48}Ca and {sup 130}Te). After analysis of the most part of available data corresponding to 4.5 yr no evidence for 0{nu}{beta}{beta} decay in {sup 100}Mo and {sup 82}Se is found. The half-life limits at 90% C.L. are 1.0x10{sup 24} yr and 3.2x10{sup 23} yr respectively. The two-neutrino decay half live values were precisely measured for all investigated isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Intrinsic ultrathin topological insulators grown via molecular beam epitaxy characterized by in-situ angle resolved photoemission spectroscopy

We demonstrate the capability of growing high quality ultrathin (10 or fewer quintuple layers) films of the topological insulators Bi{sub 2}Se{sub 3} and Bi{sub 2}Te{sub 3} using molecular beam epitaxy. Unlike previous growth techniques, which often pin the Fermi energy in the conduction band for ultrathin samples, our samples remain intrinsic bulk insulators. We characterize these films using in-situ angle resolved photoemission spectroscopy, which is a direct probe of bandstructure, and ex-situ atomic force microscopy. We find that the conduction band lies above the Fermi energy, indicating bulk insulating behavior with only the surface states crossing the Fermi energy. The use of a thermal cracker allows for more stoichiometric flux rates during growth, while still creating intrinsically doped films, paving the way for future improvements in growth of topological insulators.

36 MATERIALS SCIENCE↗

A photoelectron spectroscopy study of the electronic structure evolution in CuInSe{sub 2}-related compounds at changing copper content

Evolution of the valence-band structure at gradually increasing copper content has been analysed by x-ray photoelectron spectroscopy (XPS) in In{sub 2}Se{sub 3}, CuIn{sub 5}Se{sub 8}, CuIn{sub 3}Se{sub 5}, and CuInSe{sub 2} single crystals. A comparison of these spectra with calculated total and angular-momentum resolved density-of-states (DOS) revealed the main trends of this evolution. The formation of the theoretically predicted gap between the bonding and non-bonding states has been observed in both experimental XPS spectra and theoretical DOS.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗