Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface backgrounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Musculoskeletal Injuries in US Astronauts: Injury Prevention Strategies, Including Pre-Flight EVA Fitness Training, Return to Flight Following Injuries, and Post-Flight Reconditioning

Outline: Background; Terrestrial experience -Initial investigation into MSK (MusculoSKeletal) injuries -MSK Medicine Program -Training injuries -NBL (Neutral Buoyancy Laboratory) EMU (Extravehicular activity Mobility Unit) Work Hardening Program -Return to duty -Post-flight reconditioning program; Inflight musculoskeletal conditions; Lunar Surface Operations; Post-flight injuries.

Scheuring, Richard A.↗

Radiological Verification for the Remediation of LLRW at the Port Granby Project - 19210

The Port Granby Project is part of the Port Hope Area Initiative (PHAI) that Canadian Nuclear Laboratory (CNL) is using to manage long-term historic low level radioactive waste (LLRW) resulting from 60 years of uranium and radium processing operations in the urban setting of Port Hope, Ontario. Port Granby remediation scope includes constructing a new, secure long-term waste management facility (LTWMF) and supporting infrastructure and excavating and relocating LLRW and marginally contaminated soil from the Port Granby Waste Management Facility (PGWMF) which accepted waste until the 1980's to the newly constructed LTWMF. The PGWMF contains an estimated 450,000 cubic meters of LLRW deposited in unmarked and unlined trenches throughout the southern portion of the site that borders Lake Ontario. Project requirements include excavating contaminated material, verifying that the trench bottoms are below action levels using Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) guidance, and final restoration. This paper describes challenges of meeting remediation verification requirements using traditional field and laboratory confirmation methods in areas of deep trench areas located in rugged terrain with ponded water and mud and presents a process that has expedited the traditional MARSSIM method for verification with greater productivity, and with enhanced safety and reliability as compared to the use of traditional methods alone. This enhanced process has been successfully employed for in-situ verification so that the excavated area can be backfilled and returned to a vegetative state. This enhanced process has been examined by federal regulatory staff through the course of their onsite audits and outcomes from these examinations have all been positive. The method involves a visual inspection and traditional walkover of the area to identify any areas with radiation measurements above the region's background followed by a full area survey performed using Wood's proprietary Orion ScanPlotSM system. The ScanPlotSM data is evaluated, mapped and overlaid on top of an aerial image of the surveyed area allowing remaining radiological material at surface or near surface to be quickly and easily identified for removal. Field staff then collect soil samples from evenly distributed points within the surveyed area and field screen the samples using an X-ray fluorescence (XRF) analysis for the three primary contaminates of potential concern (CoPCs) (arsenic, uranium and lead) that are indicative of the historical contamination. Samples passing XRF field screening are packaged and sent to a local laboratory for a full suite of analyses and checked against the CoPC list to assess whether the soil matches the profile for nearby native soils and passes the remediation goals. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Shutter mechanism for calibration of the cryogenic diffused infrared background experiment (DIRBE) instrument

The design requirements, the design, the assembly and alignment, and the test program for a shutter mechanism which must operate at cryogenic temperature and draw less than 1.0 milliwatt are discussed. The design solution to meet these requirements is a device that positions a mirror with repeated accuracy, has no wearing surfaces, and operates at 2.0 K. The unique feature of this device is the simplicity of the mechanism, thus obtaining high reliability.

Tyler, Allen↗

Concept for Maritime Near-Surface Surveillance Using Water Raman Scattering

In this report we discuss a new maritime surveillance and detection concept based on Raman scattering of water molecules. Using a scanning lidar that detects Raman scattered photons from water, the absence or change of signal indicates the presence of a non-water object. With sufficient spatial resolution a negative two dimensional image of the object can be generated by the scanning lidar. Because Raman scattering is an inelastic process with a relatively large wavelength shift for water, this concept completely avoids the problematic elastic scattering for objects at or very close to the water surface. Elastic scattering makes it difficult to discriminate between water and dark objects at or near the water surface especially when automated detection is required. It is also difficult to deal with elastic scattering from the bottom surface for shallow waters. The maximum detection depth for this concept is limited by the attenuation of the excitation and return Raman light in water. If excitation in the UV is used, fluorescence can be used for discrimination between organic and non-organic objects. Range gating can be used for this concept for detection of objects below a specified depth. In this report we develop a lidar model for this concept to estimate the number of detected Raman photons for variable lidar parameters and depths in the presence of the solar background. We also report on the results of proof-of-concept measurements using the Sandia Ares lidar with excitation at 355 nm. The measurements show good agreement with the lidar model predictions. The detected number of photons for typical lidar parameter shows the concept is viable and applicable to a variety of day and nighttime detection scenarios. This concept has many potential applications including near-surface mine detection, swimmer detection for security purposes, wide area search, as well as other civilian applications.

47 OTHER INSTRUMENTATION↗

Assessing the Influence of Background State and Climate Variability on Tropical Cyclones Using Initialized Ensembles and Mesh Refinement in E3SM

The scientific goal of this project is to assess the influence of the background state and horizontal resolution of climate models on the simulation of extreme events like intense precipitation, tropical cyclones, atmospheric rivers, and heatwaves. The main results are: - Initialized ensembles of 4-week forecasts using a climate model (E3SM) show that dynamic (flow) and thermodynamic (moisture) biases asymptote to their climatological values at different rates—dynamic bias grows rapidly and approaches its climatological value within about 2 weeks whereas the thermodynamic bias takes about 4 weeks. - Moisture bias has a bigger impact on extreme events like tropical cyclones and intense precipitation than flow bias, and this impact is non-monotonic over bias evolution time. - Climate models are capable of simulating the flow features associated with unprecedented extreme events like the Western North America heatwave of June 2021, but moisture biases can weaken the surface manifestation of extreme heatwaves. Reducing model bias may be more important than increasing model resolution in improving the fidelity of heatwave simulations in climate models. - Climate models are capable of simulating weather patterns associated with “power droughts”, i.e., periods with low solar and wind power generation, provided model biases in the simulation of the background state can be corrected. - Regional mesh refinement can improve the simulation of extreme weather events but model biases may still persist.

54 ENVIRONMENTAL SCIENCES↗

A new approach to vibrational sum frequency generation spectroscopy using near infrared pulse shaping

In this work, we have developed a multipurpose vibrational sum frequency generation (vSFG) spectrometer that is uniquely capable of probing a broad range of chemical species, each requiring different experimental conditions, without optical realignment. Here, we take advantage of arbitrary near infrared (NIR) waveform generation using a 4 f -pulse shaper equipped with a 2D spatial light modulator (SLM) to tailor upconversion pulses to meet sample dependent experimental requirements. This report details the experimental layout, details of the SLM calibration and implementation, and the intrinsic benefits/limitations of this new approach to vSFG spectroscopy. We have demonstrated the competency of this spectrometer by achieving an ~3-fold increase in spectral resolution compared to conventional spectrometers by probing the model dimethyl sulfoxide/air interface. We also show the ability to suppress nonresonant background contributions from electrode interfaces using time delayed asymmetric waveforms that are generated by the NIR pulse shaper. Lastly, it is expected that this advancement in instrumentation will broaden the types of samples researchers can readily study using nonlinear surface specific spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Widening of Wind Stress Anomalies Amplifies ENSO in a Warming Climate

Abstract Climate change simulations generally indicate the strengthening of El Niño–Southern Oscillation (ENSO) sea surface temperature (SST) variability through the twenty-first century, yet a robust physical mechanism explaining this change across different models is still lacking, and the projections for ENSO amplitude exhibit a large spread. Most commonly, changes in the background state of the tropical Pacific are invoked to explain these changes of ENSO. Here, we show that changes in the structure of wind stress anomalies associated with ENSO are potentially as important as these background state changes. Specifically, changes in the magnitude, meridional width, and zonal structure of wind stress anomalies can explain approximately 53% of the intermodel variance in the projected change of ENSO magnitude through the twenty-first century as well as 43% in ENSO periodicity changes. Among these changes in the wind structure, the meridional widening of wind anomalies plays the most important role. To demonstrate that these changes are indeed critical, we develop a hybrid model of ENSO based on the Community Earth System Model, version 2, which incorporates a dynamical ocean coupled to a simplified statistical atmosphere within the tropical Pacific. In the absence of external forcing and corresponding mean-state changes, the imposed changes in wind stress anomalies in this hybrid model result in an increase of ENSO amplitudes of nearly 10% along the equator. Our results are also theoretically supported by a recharge-oscillator model that incorporates the meridional wind structure. Thus, changes in the structure of wind stress anomalies, together with changes in the mean state, likely play a critical role in the projected strengthening of ENSO.

Stuivenvolt-Allen, Jacob [Yale University, New Hav↗

Evaluation of Deep Subsurface Resistivity Imaging for Hydrofracture Monitoring

This report describes the results of the first of its kind monitoring of a hydrofracture operation with electromagnetic measurements. The researchers teamed with oil and gas producer Encana Corporation to design and execute a borehole to surface monitoring of three fracture stages at a well pad in central Colorado. The field project consisted of an equipment upgrade, a survey design and modeling phase, several weeks of data collection, and data processing and interpretation. Existing Depth to Surface Resistivity (DSR) instrumentation was upgraded to allow for continuous high precision recording from downhole sources. The full system can now collect data continuously for up to 72 hours, which is sufficient to measure data for 10 frac stages. Next we used numerical modeling and frac treatment data supplied by Encana to design a field survey to detect EM signal from induced fractures. Prior to modeling we developed a novel technique for using well casing as an antenna for a downhole source. Modeling shows that 1) a measurable response for an induced fracture could be achieved if the facture fluid was of high salinity 2) an optimum fracture response is created when the primary source field is parallel to the well casing but perpendicular to the fracture direction. In mid-July, 2014 we installed an array of more than 100 surface sensors, distributed above the treatment wells and extending for approximately 1 km north and 750 m eastward. We applied a 0.6 Hz square wave signal to a downhole current electrode located in a horizontal well 200 m offset from the treatment well with a return electrode on the surface. The data were transmitted to a recording trailer via Wi-Fi where we monitored receiver and transmitter channels continuously in a 72-hour period which covered 7 frac stages, three of which were high salinity. Although the background conditions were very noisy we were able to extract a clear signal from the high salinity stages. Initial data interpretation attempts consisting of trying to directly invert collected data using a simple background starting model did not produce reasonable models. We next used a simulated data set to develop a constrained inversion workflow that places the downhole fracture in the correct location. Finally, we used a combination of forward and inverse models to fit the collected data to a model that incorporated 3 frac stages. This project provided a first-of-its-kind application of EM technology to map an induced fracture. The results demonstrated a clear anomaly during the operation that can be fit to a reasonable model of an induced fracture.

42 ENGINEERING↗

SuperCDMS Underground Detector Fabrication Facility

The SuperCDMS SNOLAB dark matter experiment processes Ge and Si crystals into fully tested phonon and ionization detectors at surface fabrication and test facilities. If not mitigated, it is anticipated that trace-level production of radioisotopes in the crystals due to exposure to cosmic rays at (or above) sea level will result in the dominant source of background events in future dark matter searches using the current SuperCDMS detector technology. Fabrication and testing of detectors in underground facilities shielded from cosmic radiation is one way to directly reduce production of trace levels of radioisotopes, thereby improving experimental sensitivity for the discovery of dark matter beyond the level of the current experiment. In this report, we investigate the cost and feasibility to establish a complete detector fabrication processing chain in an underground location to mitigate cosmogenic activation of the Ge and Si detector substrates. For a specific and concrete evaluation, we explore options for such a facility located at SNOLAB, an underground laboratory in Sudbury, Canada hosting the current and future experimental phases of SuperCDMS.

47 OTHER INSTRUMENTATION↗

Selection and kinematic properties of ν μ charged-current inclusive events in 5 x 10 19 POT of MicroBooNE data

This note describes a first selection of ν μ charged-current inclusive events in the MicroBooNE detector. MicroBooNE is a 170 ton liquid-argon time projection chamber, located at surface level in the Booster Neutrino Beam at Fermilab. The detector is therefore continuously exposed to cosmic rays, which outnumber the observed neutrino interactions by almost three orders of magnitude. Hence, the selection of neutrino interactions within the cosmic background is the first step towards any neutrino physics analysis in MicroBooNE. This note describes two approaches, which successfully select ν μ charged-current events in a fully automated way. It also outlines further necessary steps to improve the detector understanding and reconstruction, increase the selection efficiency and address systematic uncertainties, before the first neutrino-argon cross sections can be derived.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cryogenic Quartz Crystal Microbalance

A radiatively cooled Cryogenic Quartz Crystal Microbalance designed to monitor highly volatile contaminants on the shuttle is described. Measurements are made with two 15-MHz microbalances having removable, optically polished sensors mounted in a radiant cooler. One sensor operates below the freezing point of water and monitors contamination including that of water vapor. The second sensor is heated and monitors the contamination background. It provides a reference from which the density of the water vapor cloud enveloping the shuttle is determined. The design incorporates a low-power dissipation oscillator, heaters for ice removal, and a method for attaching second-surface mirrors to the radiator employing an indium type solder instead of a room temperature vulcanizer.

D Mckeown↗

Isotopic effects in the collinear reactive FHH system

Exact quantum reaction probabilities for a collinear model of the F + HH, HD, DD and DH reactions on the MV potential energy surface have been computed using hyperspherical coordinates. The results, obtained up to a total energy of 1.8 eV, show three main features: (1) resonances, whose positions and widths are analyzed simply in the hyperspherical formalism; (2) a slowly varying background increasing for FHD, decreasing for FDH, and oscillating for FHH and FDD, whose variations are interpreted by classical dynamics; and (3) partial reaction probabilities revealing decreasing vibrational adiabaticity in the order FHH-FDD-FHD-FDH.

Lepetit, B.↗

Photometry of Phoebe

The nonsynchronous rotational period and light curve for Phoebe are analyzed. The variations in CCD chip pixel response, the intensity of the images, the sky background level, and the atmospheric effects and color response of the detector are examined. Consideration is also given to brightness variations and the solar phase function at small phase angles (0.2-1.2 deg) of the light curve. The Phoebe surface is compared with asteroid surfaces by fitting the data to a linear phase function. It is determined that the Phoebe's sidereal rotational period is refined to 9.282 + or - 0.015 hr, the light curve in V filter exhibits 20 percent brightness variations with weaker higher-order harmonics, and the solar phase coefficient at angles less than 1.2 deg is 0.180 + or 0.035 mag/deg. The Phoebe data at small phase angles correlated well with a phase function for C-type asteroids.

Kruse, S.↗

Calculation of space station infrared irradiance from atmosphere-induced emissions

The excitation mechanisms and radiance estimates over the 1 to 10 micron region for CO2(v), H2O(v), CO(v), OH(v), NO2(2B-2A) and N2(B3 pi - A3 sigma) are discussed. The infrared irradiance of the Space Station at an altitude of 460 km was estimated. The surface material was presumed to be non-carbonaceous and inert. The determined number densities of the various gases relevant to the Space Station from both ambient and outgassing sources are presented. A model for the production of and emission from the infrared active molecules was constructed that considers two classes of production processes: (1) gas phase excitation of molecules in the near Station environment by collision with ambient flux; and (2) surface processes that lead to molecular excitation. A composite spectrum of all major emitting species shows that the observed irradiance is non-uniform over the 1 to 8 micron region. The comparison of predicted irradiance with the zodiacal background indicates that the Space Station infrared background from atmosphere-induced emissions may be a problem of consequence.

Fraser, M. E.↗

Volcanic aerosols: Chemistry, evolution, and effects

Stratospheric aerosols have been the subject of scientific speculation since the 1880s, when the powerful eruption of Krakatoa attracted worldwide attention to the upper atmosphere through spectacular optical displays. The presence of a permanent tenuous dust layer in the lower stratosphere was postulated in the 1920s following studies of the twilight glow. Junge collected the first samples of these 'dust' particles and demonstrated that they were actually composed of sulfates, most likely concentrated sulfuric acid (Junge and Manson, 1961; Junge, 1963). Subsequent research has been spurred by the realization that stratospheric particles can influence the surface climate of earth through their effects on atmospheric radiation. Such aerosols can also influence, through chemical and physical effects, the trace composition of the atmosphere, ozone concentrations, and atmospheric electrical properties. The properties of stratospheric aerosols (both the background particles and those enhanced by volcanic eruptions) were measured in situ by balloon ascents and high altitude aircraft sorties. The aerosols were also observed remotely from the ground and from satellites using both active (lidar) and passive (solar occultation) techniques (remote sensing instruments were carried on aircraft and balloon platforms as well). In connection with the experimental work, models were developed to test theories of particle formation and evolution, to guide measurement strategies, to provide a means of connecting laboratory and field data, and to apply the knowledge gained to answer practical questions about global changes in climate, depletion of the ozone layer, and related environmental problems.

Turco, Richard↗

Asymmetric gravity jitter excited slosh waves at a liquid-vapor-solid interface in microgravity

The dynamical behavior of fluids affected by the asymmetric gravity jitter oscillations is investigated focusing on the surface tension effect on partially filled rotating fluids in a sub-scale gravity probe-B spacecraft propellant dewar tank. Data obtained revealed that the lower frequency gravity jitter imposed on the time-dependent variations of the background gravity direction induced a greater amplitude of oscillations and a stronger degree of asymmetry in liquid-vapor interface geometry than that caused by the higher frequency gravity jitter. It is also found that the greater the components of background gravity in radial and circumferential directions the greater the contribution to driving more toward increasing amplitude and degrees of asymmetry of the liquid-vapor interface profiles, which in turn modify the disturbance of moment of inertia and angular momentum of spacecraft.

Hung, R. J.↗

The evaluation of ASOS for the Kennedy Space Center's Shuttle Landing Facility

This report documents the Applied Meteorology Unit's (AMU) evaluation of the effectiveness and utility of the Automated Surface Observing System (ASOS) in terms of spaceflight operations and user requirements. In particular, the evaluation determines which of the Shuttle Landing Facility (SLF) observation requirements can be satisfied by ASOS. This report also includes a summary of ASOS' background, current configuration and specifications, system performance, and the possible concepts of operations for use of ASOS at the SLF. This evaluation stems from a desire by the Air Force to determine if ASOS units could be used to reduce the cost of SLF meteorological observations.

Yersavich, Ann↗

Photon-Counting Microlaser Rangers, Transponders, and Altimeters

Unlike current manned systems, NASA's next generation SLR2000 Satellite Laser Ranging (SLR) station is fully autonomous. eye-safe, relatively compact and inexpensive. and, during daytime tracking operates at signal-to-noise ratios several orders of magnitude below unity. Tiny, passively Q-switched microlasers generate ultra-short pulses with output energies on the order of 100 micron-J at few kHz rates to achieve mm-level ranging precision to satellite altitudes of 20,000 km. Special ranging receivers, combined with Poisson statistical analysis of the received photon distribution, enable the system to rapidly and reliably identify and extract the single photon laser echoes from the solar background. The enhanced rate of return, combined with a uniform signal strength, can actually drive down both systematic and random range errors. The new SLR2000 technology has already spawned exciting new applications. Compact microlaser altimeters, capable of mapping the surface of a planet or other celestial body at multikilohertz rates, is one such application, and a high altitude, airborne version is currently being developed under NASA's Instrument Incubator Program. Interplanetary microlaser transponders would be capable of performing decimeter ranging or subnanosecond time transfer to spacecraft throughout the inner Solar System. resulting in improved knowledge of planetary motions and liberations and enhanced General Relativity experiments.

Degnan, John J.↗