Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

NOAA Air Resources Laboratory Atmospheric Turbulence and Diffusion Division Contribution to LAFE Field Campaign Report

The Land-Atmosphere Feedback Experiment (LAFE) was conducted between 1 and 31 August, 2017 at the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observatory. The main scientific goal of LAFE was to investigate feedbacks occurring between different land surface types and the overlying atmosphere to improve turbulence parameterizations in numerical weather prediction models. LAFE collaborators included scientists from the following institutions: Cleveland State University Cooperative Institute for Meteorological Satellite Studies (CIMSS) Cooperative Institute for Research in Environmental Sciences (CIRES) Leibniz University Institute of Meteorology and Climatology Marquette University NASA Goddard Space Flight Center National Center for Atmospheric Research (NCAR) National Severe Storms Laboratory (NSSL) NOAA Earth System Research Laboratory (ESRL) Pacific Northwest National Laboratories (PNNL) University of Hohenheim Institute of Physics and Meteorology University of Tennessee Space Institute (UTSI). In addition to helping plan the scientific objectives of LAFE, collaborators deployed several lidars (i.e., temperature, water, vapor, and wind) and remote-sensing instruments (e.g., microwave radiometers, atmospheric emitted radiance interferometers [AERIs], etc.) to complement the suite of instrument platforms already present at the SGP site. The measurement platforms, as well as scientific objectives of LAFE, are summarized in Wulfmeyer et al. (2018). To complement these platforms, the NOAA Atmospheric Turbulence and Diffusion Division (ATDD) installed micrometeorological towers to continuously measure fluxes of momentum, sensible heat, latent heat, and CO 2 at 2 m and 10 m above ground level (AGL) at three sites during LAFE. Tower measurements also included temperature, humidity, wind speed and direction, pressure, rainfall, soil temperature, and soil moisture. The three micrometeorological towers were installed between 9 and 13 July, 2017 and were removed between 12 and 14 September, 2017. During the experiment, the footprint of Tower 1 included a mixture of soybean and grassland that transitioned to mature soybean crop during the second half of the experiment. Tower 2’s footprint encompassed a field of grazed pasture, and Tower 3’s footprint was a mature soybean crop. The meteorological and flux measurements from these towers were/are being used to: Increase the spatial density of measurement platforms that were already available at the ARM facility and that were deployed during LAFE Improve the characterization of surface fluxes around the SGP site Explore the validity of applying Monin-Obukhov Similarity Theory (MOST) over different land surface types and improve knowledge of flux-gradient relationships Provide initial conditions and be used for verification for large-eddy simulations (LES) Evaluate numerical weather prediction models, e.g., the High-Resolution Rapid Refresh (HRRR), to identify and correct for biases within these models Evaluate the role of low-level advection at each site, which would be present in the flux-divergence data sets obtained from the three towers.

Southern Great Plains, unmanned aerial systems, su↗

Interpretation of Impact Features on the Surface of the WFPC-2 Radiator

An examination of the Hubble Space Telescope (HST) Wide Field Planetary Camera 2 (WFPC-2) radiator assembly was conducted at NASA Goddard Space Flight Center (GSFC) during the summer of 2009. Immediately apparent was the predominance of impact features resident only in the thermal paint layer; similar phenomenology was observed during a prior survey of the WFPC-1 radiator. As well, larger impact features displayed spallation zones, darkened areas, and other features not encountered in impacts onto bare surfaces. Whereas the characterization of impact features by depth and diameter on unpainted surfaces has been long established, the mitigation provided by the painted layer presented a challenge to further analysis of the WFPC-2 features; a literature search revealed no systematic characterization of the ballistic limit equations of painted or coated surfaces. In order to characterize the impactors responsible for the observed damage, an understanding of the cratering and spallation phenomenology of the painted surface was required. To address that challenge, NASA sponsored a series of hypervelocity calibration shots at the White Sands Test Facility (WSTF). This effort required the following activities: the production, painting, and artificial ageing of test coupons in a manner similar to the actual radiator; the determination of the test matrix parameters projectile diameter and material (mass density), impact velocity, and impact angle, so as to enable both an adequate characterization of the impact by projectile and impact geometry and support hydrocode modeling to fill in and extend the applicability of the calibration shots; the selection of suitable projectiles; logistics; and an analysis of feature characteristics upon return of the coupons. This paper reports the results of the test campaign and presents ballistic limit equations for painted surfaces. We also present initial results of our interpretation methodologies.

Anz-Meador, P. D.↗

Atomic force microscopy and scanning electron microscopy characterization of the controlling of surface morphology of epoxy‐amine‐cured spin‐coated films

Abstract Atomic force microscopy (AFM) was successfully used to study spin‐coated, amine‐cured epoxy film microstructure and morphology. The air‐epoxy and epoxy‐substrate interfaces were examined using tapping‐mode height and phase imaging AFM. The impact of relative humidity on the morphology and microstructure of the surfaces was determined. AFM was able to elucidate the changes on the surface as relative humidity during processing increased. It was observed that large nodular formations formed on the epoxy surface expose to the air but not epoxy surface formed on the substrate in addition to varying regions of more or less compliant structures, which was attributed to carbamate formation caused by the amine curing agent reaction with atmospheric CO 2 . Scanning electron microscopy (SEM) was used to further elucidate interface and interphase morphology of spin‐coated epoxies. Experimentation also demonstrated that post‐curing above the glass transition did not change the morphology structure, suggesting surface structures are “locked‐in.” SEM was used to further elucidate how the interface and interphase change with changing environmental conditions at both the air‐epoxy and epoxy‐substrate interface/interphases, including the impact of atmospheric CO 2 on Marangoni cell formation.

Shenk, Timothy M.↗

Dispersal limitation and the assembly of soil Actinobacteria communities in a long-term chronosequence

It is uncertain whether the same ecological forces that structure plant and animal communities also shape microbial communities, especially those residing in soil. We sought to uncover the relative importance of present-day environmental characteristics, climatic variation, and historical contingencies in shaping soil actinobacterial communities in a long-term chronosequence. Actinobacteria communities were characterized in surface soil samples from four replicate forest stands with nearly identical edaphic and ecological properties, which range from 9500 to 14,000 years following glacial retreat in Michigan. Terminal restriction fragment length polymorphism (TRFLP) profiles and clone libraries of the actinobacterial 16S rRNA gene were constructed in each site for phenetic and phylogenetic analysis to determine whether dispersal limitation occurred following glacial retreat, or if community composition was determined by environmental heterogeneity. At every level of examination, actinobacterial community composition most closely correlated with distance, a surrogate for time, than with biogeochemical, plant community, or climatic characteristics. Despite correlation with leaf litter C:N and annual temperature, the significant and consistent relationship of biological communities with time since glacial retreat provides evidence that dispersal limitation is an ecological force structuring actinobacterial communities in soil over long periods of time.

54 ENVIRONMENTAL SCIENCES↗

Development and Application of DropletProbe Mass Spectrometry for Examining Biodistribution of Therapeutics

dropletProbe mass spectrometry is a novel technique for molecular characterization of surfaces. It can be used for rapid ex vivo analysis of therapeutics from thin animal tissue sections and has been shown to improve understanding of a drug’s absorption, distribution, metabolism and excretion (ADME) properties. Here, we describe the tissue distribution analysis of diclofenac from a dosed whole-body mouse thin tissue section using a dropletProbe mass spectrometry system.

Chen, Bingming↗

Characterizing the Distribution of Microwave Surface Resistance of HTS Film Based on Metal Ring

This paper presents a novel method for measuring the microwave surface resistance distribution of high-temperature superconducting thin films by a dielectric resonator with a metal ring. After calibration, the effect of metal ring loss on measurement accuracy is negligible. The measurement resolution is determined by the internal diameter of the metal ring, which makes the design of the device more flexible. Therefore, measurement with high resolution and convenience can be achieved simultaneously by using a metal ring with proper size and operating at a relatively low frequency. A test device working at 32 GHz with TE{sub 01(1 + δ)} mode was developed. Its resolution is a circular area with a diameter of 5 mm and an area of 19.6 mm{sup 2}. The unloaded quality factor of the test device is more than 140,000, when it is loaded by the calibration cavity. The test device has a relative uncertainty of less than 6%, which complies with the uncertainty (20%) specified by the international standard for the microwave surface resistance measurement of high-temperature superconducting (HTS) thin film. The surface resistance distribution of a 2-in. YBCO/LAO/YBCO superconducting film sample was measured by this test device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of Superhydrophobic Calcium Phosphate Coating on Mg-Zn-Ca alloy and Its Corrosion Resistance

A novel superhydrophobic calcium phosphate coating was prepared on a magnesium alloy substrate by a highly effective chemical conversion process and subsequent chemical modification. Different methods were employed to characterize the surface morphology and chemical composition as well as measure the wettability of the coating. It was demonstrated that the as-prepared superhydrophobic calcium phosphate coating has a typical three-level hierarchical structure consisted of micro-protrusions, submicro-lumps and nano-grains, conferring excellent superhydrophobicity with a water contact angle of 159°. The electrochemical measurements and appropriate equivalent circuit revealed that the corrosion-resistant performance of the superhydrophobic calcium phosphate coating was significantly improved as compared with that of the substrate, the corrosion potential of the superhydrophobic coating increases from −1.56 to −1.36 V, and its corrosion current density decreases from 1.29 × 10{sup −4} to 1.3 × 10{sup −6} A/cm{sup 2}. The anti-corrosion mechanism of the superhydrophobic coating was also discussed. It can be indicated that the corrosion inhibitive properties of the coating are in accordance with its hydrophobicity, which is owing to the presence of a protective layer of air trapped in the grooves of the coating surface to isolate the underlying materials from the external environment.

36 MATERIALS SCIENCE↗

Corrosion Behavior of Fe-40at.%Al-Based Intermetallic in 0.25 M H{sub 2}SO{sub 4} Solution

The electrochemical behavior of Fe-40at.%Al-based intermetallic microalloyed with 3 and 5 at.% Cu additions in 0.25 M H{sub 2}SO{sub 4} solution over time was studied. A complementary study to characterize the surface morphology and semiquantitative chemical analysis of the corrosion products after 24 h of immersion was performed using scanning electron microscopy and x-ray energy dispersion spectrum. By means of electrochemical techniques, it was shown that Cu addition has a positive effect on corrosion resistance of Fe-40at.%Al-based intermetallic alloy. Additionally, the relatively high concentration of Cu consolidated the passive film of corrosion products and its stability.

36 MATERIALS SCIENCE↗

Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams

Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.

09 BIOMASS FUELS↗

Solution synthesis of two-dimensional zinc oxide (ZnO)/molybdenum disulfide (MoS 2 ) heterostructure through reactive templating for enhanced visible-light degradation of rhodamine B

Numerous inorganic materials have been identified as potential candidates for high-performance photocatalysts. However, their solar-to-energy conversion efficiencies still fail to meet commercial requirements. Here, the main hurdle is the rapid recombination of photoexcited electrons and holes in single-phase materials. A viable predicted approach to suppress charge recombination is coupling two materials to form a two-dimensional (2D) heterostructure that physically separates photoinduced electrons and holes in different layers. In this work, the heterostructure-based paradigm was tested and a scalable solution synthesis of epitaxial ZnO-MoS 2 heterostructure was developed. A 2D ZnO-MoS 2 heterostructure was synthesized under hydrothermal conditions by stabilizing intermediate Zn-hydroxide states on a functionalized MoS 2 surface. Detailed characterization showed the formation of multilayer heterostructure with MoS 2 flakes intercalated between large size ZnO plates. The performance of this heterostructure was evaluated using photocatalytic degradation of rhodamine B. A degradation efficiency of 70% was measured within 90 minutes of visible-light irradiation, almost doubling the efficiency of the corresponding single-phase materials or their physical mixtures.

2D heterostructure↗

Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys

We present that deformation twinning plays a critical role on improving metals or alloys ductility, especially for hexagonal close-packed materials with low symmetry crystal structure. A rolled Mg alloy was selected as a model system to investigate the extension twinning behaviors and characteristics of parent-twin interactions by nondestructive in situ 3D synchrotron X-ray microbeam diffraction. Besides twinning- detwinning process, the twinning-like lattice reorientation process was captured within an individual grain inside a bulk material during the strain reversal. The distributions of parent, twin, and reorientated grains and sub-micron level strain variation across the twin boundary are revealed. A theoretical calculation of the lattice strain confirms that the internal strain distribution in parent and twinned grains correlates with the experimental setup, grain orientation of parent, twin, and surrounding grains, as well as the strain path changes. In conclusion, the study suggests a novel deformation mechanism within the hexagonal close-packed structure that cannot be determined from surface-based characterization methods.

36 MATERIALS SCIENCE↗

Characterization of local morphology and availability of triple-phase boundaries in solid oxide cell electrodes

The performance of solid oxide cells is known to be dependent upon the density of three phase boundaries (TPB), but the potential for improving their effective electrocatalytic activity by morphological adjustments is imprecisely known. A spilling algorithm was developed to characterize the surfaces available for diffusion at TPBs. It scans each slice in a 3-D imaging dataset to measure the interfaces between the solid and the pore phases at each TPB. Because of the stereological approach, these surfaces are defined as “available lengths” (L A ). The measurement was tested on artificial packed spheres structures with controlled properties and a percolation theory-based model before application to a real Ni-YSZ. The L A distributions cover 2 orders of magnitude. The subset shorter than the extent of diffusion profiles reported in the literature is in the range of 3% and 20% for Ni and YSZ, respectively, suggesting possible limitations of their effective electrocatalytic properties. The average L A is larger on YSZ than on Ni, which is a trend opposite to the phase diameter. The available length analysis revealed microstructural characteristics that stem from the manufacturing route and cannot be identified by the inspection of standard metric and topological properties. A strong correlation between the available length and the extension of TPB lines is observed for Ni but not for YSZ, despite the predominance of convex shapes, which likely originates from the Ni reduction. This suggests possibilities for controlling the available length by the manufacturing route, depending specifically on the electrocatalytic properties of the phases in composite materials.

3-D electron microscopy↗

A study of Zn x Zr y O z mixed oxides for direct conversion of ethanol to isobutene

Zn x Zr y O z mixed oxides were studied for direct conversion of ethanol to isobutene. Reaction conditions (temperature, residence time, ethanol molar fraction, steam to carbon ratio), catalyst composition, and pretreatment conditions were investigated, aiming at high-yield production of isobutene under industrially relevant conditions. An isobutene yield of 79% was achieved with an ethanol molar fraction of 8.3% at 475 °C on fresh Zn 1 Zr 8 O 17 catalysts. Further durability and regeneration tests revealed that the catalyst exhibited very slow deactivation via coking formation with isobutene yield maintained above 75% for more than 10 h time-on-stream. More importantly, the catalysts activity in terms of isobutene yield can be readily recovered after in situ calcination in air at 550 °C for 2.5 h. XRD, TPO, IR analysis of adsorbed pyridine (IR-Py), and nitrogen sorption have been used to characterize the surface physical/chemical properties to correlate the structure and performance of the catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and magnetism in Ga-rich MnGa/GaN thin films and unexpected giant perpendicular anisotropy in the ultra-thin film limit

Here, we report structural, surface, and magnetic investigations of ferromagnetic Ga-rich MnGa thin and ultra-thin films grown on semiconducting GaN(0001) using molecular beam epitaxy. The Mn:Ga composition ratio is varied from ≈1 (stoichiometric) to ≈0.42 (very Ga-rich) for different samples. We find that the L1 0 MnGa phase is preserved down to a Mn:Ga ratio of ≈0.81. As the Ga concentration increases, we observe the coexistence of more Ga-rich phases, namely Mn3Ga5 and Mn2Ga5. Room temperature scanning tunneling microscopy imaging reveals highly epitaxial films, with atomically smooth and highly reconstructed surfaces. Magnetic characterizations show how the magnetic properties evolve with changing composition and that giant perpendicular magnetic anisotropy is induced by reducing the size of our films.

36 MATERIALS SCIENCE↗

In-situ neutron imaging of hydrogenous fuels in combustion generated porous carbons under dynamic and steady state pressure conditions

Here, we report results from experiments where we characterize the surface properties of soot particles interacting with high-pressure methane. We also found considerable differences in behavior of the soot material between static and dynamic pressure conditions that can be explained by multiscale correlations in the dynamics, from the micro to macro of the porous fractal-like carbon matrix. The measurements were possible utilizing cold neutron imaging of methane mixed with combustion generated carbon (soot) inside steel cells. The studies were performed under static and dynamic pressure conditions in the range 10-90 bar, and are of interest for applications of energy storage of hydrogenous fuels. The very high cross sections for neutrons compared to hard X-ray photons, enabled us to find considerable amounts of native hydrogen in the soot and to see and quantify the presence of hydrogen atoms in the carbon soot matrix under different pressure conditions. Our work lays the base for more detailed in-situ investigations on the interaction of porous carbon materials with hydrogen in practical environments for hydrogen and methane storage.

08 HYDROGEN↗