Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Verification of electromagnetic fluid-kinetic hybrid electron model in global gyrokinetic particle simulation

The fluid-kinetic hybrid electron model is verified in global gyrokinetic particle simulation of linear electromagnetic drift-Alfvenic instabilities in tokamak. In particular, we have recovered the {beta}-stabilization of the ion temperature gradient mode, transition to collisionless trapped electron mode, and the onset of kinetic ballooning mode as {beta}{sub e} (ratio of electron kinetic pressure to magnetic pressure) increases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Superheater Corrosion In Biomass Boilers: Today's Science and Technology

This report broadens a previous review of published literature on corrosion of recovery boiler superheater tube materials to consider the performance of candidate materials at temperatures near the deposit melting temperature in advanced boilers firing coal, wood-based fuels, and waste materials as well as in gas turbine environments. Discussions of corrosion mechanisms focus on the reactions in fly ash deposits and combustion gases that can give corrosive materials access to the surface of a superheater tube. Setting the steam temperature of a biomass boiler is a compromise between wasting fuel energy, risking pluggage that will shut the unit down, and creating conditions that will cause rapid corrosion on the superheater tubes and replacement expenses. The most important corrosive species in biomass superheater corrosion are chlorine compounds and the most corrosion resistant alloys are typically FeCrNi alloys containing 20-28% Cr. Although most of these materials contain many other additional additions, there is no coherent theory of the alloying required to resist the combination of high temperature salt deposits and flue gases that are found in biomass boiler superheaters that may cause degradation of superheater tubes. After depletion of chromium by chromate formation or chromic acid volatilization exceeds a critical amount, the protective scale gives way to a thick layer of Fe 2 O 3 over an unprotective (FeCrNi) 3 O 4 spinel. This oxide is not protective and can be penetrated by chlorine species that cause further acceleration of the corrosion rate by a mechanism called active oxidation. Active oxidation, cited as the cause of most biomass superheater corrosion under chloride ash deposits, does not occur in the absence of these alkali salts when the chloride is present as HCl gas. Although a deposit is more corrosive at temperatures where it is molten than at temperatures where it is frozen, increasing superheater tube temperatures through the measured first melting point of fly ash deposits does not necessarily produce a step increase in corrosion rate. Corrosion rate typically accelerates at temperatures below the first melting temperature and mixed deposits may have a broad melting temperature range. Although the environment at a superheater tube surface is initially that of the ash deposits, this chemistry typically changes as the deposits mature. The corrosion rate is controlled by the environment and temperature at the tube surface, which can only be measured indirectly. Some results are counter-intuitive. Two boiler manufacturers and a consortium have developed models to predict fouling and corrosion in biomass boilers in order to specify tube materials for particular operating conditions. It would be very useful to compare the predictions of these models regarding corrosion rates and recommended alloys in the boiler environments where field tests will be performed in the current program. Manufacturers of biomass boilers have concluded that it is more cost-effective to restrict steam temperatures, to co-fire biofuels with high sulfur fuels and/or to use fuel additives rather than try to increase fuel efficiency by operating with superheater tube temperatures above melting temperature of fly ash deposits. Similar strategies have been developed for coal fired and waste-fired boilers. Additives are primarily used to replace alkali metal chloride deposits with higher melting temperature and less corrosive alkali metal sulfate or alkali aluminum silicate deposits. Design modifications that have been shown to control superheater corrosion include adding a radiant pass (empty chamber) between the furnace and the superheater, installing cool tubes immediately upstream of the superheater to trap high chloride deposits, designing superheater banks for quick replacement, using an external superheater that burns a less corrosive biomass fuel, moving circulating fluidized bed (CFB) superheaters from the convective pass into the hot recirculated fluidizing medium and adding an insulating layer to superheater tubes to raise their surface temperature above the dew point temperature of alkali chlorides. These design changes offer advantages but introduce other challenges. For example, operating with superheater temperatures above the dew point of alkali chlorides could require the use of creep-resistant tube alloys and doesn't eliminate chloride corrosion. Improved test methods that can be applied within this project include automated dimensional metrology to make a statistical analysis of depth of penetration and corrosion product thickness, and simultaneous thermal analysis measurements to quantify the melting of complex ashes and avoid the unreliability of the standard ash fusion test. Other important developments in testing include the installation of individually-temperature-controlled superheater loops for corrosion testing in operating boilers and temperature gradient testing.

09 BIOMASS FUELS↗

Multiscale features of density and frequency spectra from nonlinear gyrokinetics

Gyrokinetic turbulence simulations covering both electron and ion spatio-temporal scales self-consistently are presented. It is found that for experimentally realistic transport levels at long wavelengths, electron temperature gradient modes may yield substantial or even dominant high-wavenumber contributions to the electron heat flux. It is investigated in which way this behavior is reflected in several experimentally accessible quantities as, for instance, density or frequency spectra.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geochemistry Sampling for Traditional and Multicomponent Equilibrium Geothermometry in Southeast Idaho

The Eastern Snake River Plain (ESRP) is an area of high regional heat flux due the movement of the North American Plate over the Yellowstone Hotspot beginning ca.16 Ma. Temperature gradients between 45-60 °C/km (up to double the global average) have been calculated from deep wells that penetrate the upper aquifer system (Blackwell 1989). Despite the high geothermal potential, thermal signatures from hot springs and wells are effectively masked by the rapid flow of cold groundwater through the highly permeable basalts of the Eastern Snake River Plain aquifer (ESRPA) (up to 500+ m thick). This preliminary study is part of an effort to more accurately predict temperatures of the ESRP deep thermal reservoir while accounting for the effects of the prolific cold water aquifer system above. This study combines the use of traditional geothermometry, mixing models, and a multicomponent equilibrium geothermometry (MEG) tool to investigate the geothermal potential of the ESRP. In March, 2014, a collaborative team including members of the University of Idaho, the Idaho National Laboratory, and the Lawrence Berkeley National Laboratory collected 14 thermal water samples from and adjacent to the Eastern Snake River Plain. The preliminary results of chemical analyses and geothermometry applied to these samples are presented herein.

15 GEOTHERMAL ENERGY↗

Colorado Heat Flow Data from IHFC

This layer contains the heat flow sites and data of the State of Colorado compiled from the International Heat Flow Commission (IHFC) of the International Association of Seismology and Physics of the Earth's Interior (IASPEI) global heat flow database. The data include different items: Item number, descriptive code, name of site, latitude and longitude, elevation, depth interval, number of temperature data, temperature gradient, number of conductivity measurement, average conductivity, number of heat generation measurements, average heat production, heat flow, number of individual sites, references, and date of publication.

15 GEOTHERMAL ENERGY↗

Flux tube train model for local turbulence simulation of toroidal plasmas

A new simulation method for local turbulence in toroidal plasmas is developed by extending the conventional idea of the flux tube model. In the new approach, a train of flux tubes is employed, where flux tube simulation boxes are serially connected at each end along a field line so as to preserve a symmetry of the local gyrokinetic equations for image modes in an axisymmetric torus. Validity of the flux tube train model is confirmed against the toroidal ion temperature gradient turbulence for a case with a long parallel correlation of fluctuations, demonstrating numerical advantages over the conventional method in the time step size and the symmetry-preserving property.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of thermal processes in high pressure liquid chromatography. I. Low pressure onset of thermal heterogeneity

Heat due to viscous friction is generated in chromatographic columns. When these columns are operated at high flow rates, under a high inlet pressure, this heat causes the formation of significant axial and radial temperature gradients. Consequently, these columns become heterogeneous and several physico-chemical parameters, including the retention factors and the parameters of the mass transfer kinetics of analytes are no longer constant along and across the columns. A robust modeling of the distributions of the physico-chemical parameters allows the analysis of the impact of the heat generated on column performance. We developed a new model of the coupled heat and mass transfers in chromatographic columns, calculated the axial and radial temperature distributions in a column, and derived the distributions of the viscosity and the density of the mobile phase, hence of the axial and radial mobile phase velocities. The coupling of the mass and the heat balances in chromatographic columns was used to model the migration of a compound band under linear conditions. This process yielded the elution band profiles of analytes, hence the column efficiency under two different sets of experimental conditions: (1) the column is operated under natural convection conditions; (2) the column is dipped in a stream of thermostated fluid. The calculated results show that the column efficiency is remarkably lower in the second than in the first case. The inconvenience of maintaining constant the temperature of the column wall (case 2) is that retention factors and mobile phase velocities vary much more significantly across the column than if the column is kept under natural convection conditions (case 1).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trapped gyro-Landau-fluid transport modeling of DIII-D hybrid discharges

Previous work has summarized the physics and first results of benchmarking the trapped gyro-Landau-fluid (TGLF) model for turbulent transport driven by trapped ion and electron modes, ion and electron temperature gradient (ETG) modes, and electromagnetic kinetic ballooning modes including the effects of shaped geometry. Recently, an improved collision model was implemented which provides a more accurate fit to a transport database of nonlinear collisional GYRO[J. Candy and R. E. Waltz, J. Comput. Phys. 186, 545 (2003)] simulations of long wavelength driftwave turbulence. The impact of the new collision model on TGLF modeling results was unknown. Using the improved TGLF model we obtain excellent agreement with the ion and electron temperature profiles from 30 DIII-D [A. Mahdavi and J. L. Luxon, Fusion Sci. Technol. 48, 2 (2005)] hybrid discharges. The transport results show that the electron energy transport tends to be dominated by short wavelength ETG modes in cases where the ion energy transport approaches neoclassical levels. The hybrid regime has significant energy confinement improvement from ExB velocity shear which is well predicted by TGLF. Weak magnetic shear and low safety factor are also shown to enhance the hybrid regime energy confinement. In high normalized {beta} hybrids, we find that finite {beta} effects noticably reduce the predicted electron energy transport and improve agreement with the measured electron temperature profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of bootstrap current in the pedestal region of tokamaks

The high confinement mode (H-mode) plasmas in the pedestal region of tokamaks are characterized by steep gradient of the radial electric field, and sonic poloidal U{sub p,m} flow that consists of poloidal components of the E×B flow and the plasma flow velocity that is parallel to the magnetic field B. Here, E is the electric field. The bootstrap current that is important for the equilibrium, and stability of the pedestal of H-mode plasmas is shown to have an expression different from that in the conventional theory. In the limit where ‖U{sub p,m}‖≫ 1, the bootstrap current is driven by the electron temperature gradient and inductive electric field fundamentally different from that in the conventional theory. The bootstrap current in the pedestal region can be controlled through manipulating U{sub p,m} and the gradient of the radial electric. This, in turn, can control plasma stability such as edge-localized modes. Quantitative evaluations of various coefficients are shown to illustrate that the bootstrap current remains finite when ‖U{sub p,m}‖ approaches infinite and to provide indications how to control the bootstrap current. Approximate analytic expressions for viscous coefficients that join results in the banana and plateau-Pfirsch-Schluter regimes are presented to facilitate bootstrap and neoclassical transport simulations in the pedestal region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Attenuation of single-tone ultrasound by an atmospheric glow discharge plasma barrier

Propagation of 143 kHz ultrasound through an atmospheric pressure glow discharge in air was studied experimentally. The plasma was a continuous dc discharge formed by a multipin electrode system. Distributions of the gas temperature were also obtained in and around the plasma using laser-induced Rayleigh scattering technique. Results show significant attenuation of the ultrasound by the glow discharge plasma barrier (up to -24 dB). The results indicate that sound attenuation does not depend on the thickness of the plasma and attenuation is caused primarily by reflection of the sound waves from the plasma due to the sharp gas temperatures gradients that form at the plasma boundary. These gradients can be as high as 80 K/mm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermoelectric Mechanism of Field Emission from Carbon Nanostructures

A model describing peculiarities of field emission from carbon nanomaterials is considered. The model is based on inclusion by drag of electrons by ballistic phonons in the temperature gradient range in the emission center. The model does not require any additional assumptions concerning a special energy structure of the emission center. Quantitative estimates of the thermopower coefficient obtained based on the emission model are in good agreement with experimental results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of new Ga{sub 7}Ge{sub 3}Te{sub 11}—One-dimensional phase in Ga–Ge–Te ternary system: Crystal structure and physical properties

Ga{sub 7}Ge{sub 3}Te{sub 11} single crystals were grown using transport in a temperature gradient. The prepared single crystals have a needle-like appearance, 1 to 40 μm in diameter and 2 to 20 mm in length. The Ga{sub 7}Ge{sub 3}Te{sub 11} single crystals were characterized by both single crystalline and powder X-ray diffraction. The structure consists of one-dimensional molecular strings bonded together through tellurium atoms by a weak bond of the van der Waals type. A large unit cell volume indicates the complexity of the structure. The room temperature theoretical density is 5.73 g cm{sup −3}. The compound shows semiconducting properties and possesses peculiar magnetic properties. - Graphical abstract: 1D Ga{sub 7}Ge{sub 3}Te{sub 11} - cross-view of the molecular string. - Highlights: • We prepared and characterized novel compound Ga{sub 7}Ge{sub 3}Te{sub 11}in single crystalline form. • Ga{sub 7}Ge{sub 3}Te{sub 11} is one-dimensional structure; orthorhombic lattice; space group Pnma. • Ga{sub 7}Ge{sub 3}Te{sub 11} is an intrinsic semiconductor; E{sub g}≅0.7 eV. • Ga{sub 7}Ge{sub 3}Te{sub 11} is paramagnetic with an effective magnetic moment of p{sub eff}=0.06 μ{sub B} per atom. • Crossover from para – to diamagnetism is observed in field dependence of susceptibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Internal transport barriers in the National Spherical Torus Experiment

In the National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 41, 1435 (2001)], internal transport barriers (ITBs) are observed in reversed (negative) shear discharges where diffusivities for electron and ion thermal channels and momentum are reduced. While neutral beam heating can produce ITBs in both electron and ion channels, high harmonic fast wave heating can also produce electron ITBs (e-ITBs) under reversed magnetic shear conditions without momentum input. Interestingly, the location of the e-ITB does not necessarily match that of the ion ITB (i-ITB). The e-ITB location correlates best with the magnetic shear minima location determined by motional Stark effect constrained equilibria, whereas the i-ITB location better correlates with the location of maximum ExB shearing rate. Measured electron temperature gradients in the e-ITB can exceed critical gradients for the onset of electron thermal gradient microinstabilities calculated by linear gyrokinetic codes. A high-k microwave scattering diagnostic shows locally reduced density fluctuations at wave numbers characteristic of electron turbulence for discharges with strongly negative magnetic shear versus weakly negative or positive magnetic shear. Reductions in fluctuation amplitude are found to be correlated with the local value of magnetic shear. These results are consistent with nonlinear gyrokinetic simulations predicting a reduction in electron turbulence under negative magnetic shear conditions despite exceeding critical gradients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic study of electromagnetic effects on toroidal momentum transport in tokamak plasmas

The effect of a finite {beta}{sub e} = 8{pi}n{sub e}T{sub e}/B{sup 2} on the turbulent transport of toroidal momentum in tokamak plasmas is discussed. From an analytical gyrokinetic model as well as local linear gyrokinetic simulations, it is shown that the modification of the parallel mode structure due to the nonadiabatic response of passing electrons, which changes the parallel wave vector k{sub ||} with increasing {beta}{sub e}, leads to a decrease in size of both the diagonal momentum transport as well as the Coriolis pinch under ion temperature gradient turbulence conditions, while for trapped electron modes, practically no modification is found. The decrease is particularly strong close to the onset of the kinetic ballooning modes. There, the Coriolis pinch even reverses its direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring kinetic energy changes in the mesoscale with low acquisition rates

We report on the measurement of the average kinetic energy changes in isothermal and non-isothermal quasistatic processes in the mesoscale, realized with a Brownian particle trapped with optical tweezers. Our estimation of the kinetic energy change allows to access to the full energetic description of the Brownian particle. Kinetic energy estimates are obtained from measurements of the mean square velocity of the trapped bead sampled at frequencies several orders of magnitude smaller than the momentum relaxation frequency. The velocity is tuned applying a noisy electric field that modulates the amplitude of the fluctuations of the position and velocity of the Brownian particle, whose motion is equivalent to that of a particle in a higher temperature reservoir. Additionally, we show that the dependence of the variance of the time-averaged velocity on the sampling frequency can be used to quantify properties of the electrophoretic mobility of a charged colloid. Our method could be applied to detect temperature gradients in inhomogeneous media and to characterize the complete thermodynamics of biological motors and of artificial micro and nanoscopic heat engines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Majorana Thermosyphon Prototype Experimental Results

Objective The Majorana demonstrator will operate at liquid Nitrogen temperatures to ensure optimal spectrometric performance of its High Purity Germanium (HPGe) detector modules. In order to transfer the heat load of the detector module, the Majorana demonstrator requires a cooling system that will maintain a stable liquid nitrogen temperature. This cooling system is required to transport the heat from the detector chamber outside the shield. One approach is to use the two phase liquid-gas equilibrium to ensure constant temperature. This cooling technique is used in a thermosyphon. The thermosyphon can be designed so the vaporization/condensing process transfers heat through the shield while maintaining a stable operating temperature. A prototype of such system has been built at PNNL. This document presents the experimental results of the prototype and evaluates the heat transfer performance of the system. The cool down time, temperature gradient in the thermosyphon, and heat transfer analysis are studied in this document with different heat load applied to the prototype.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Small-Angle Neutron Scattering Measurements of the δ Deuteride Phase in Zircaloy 4

Hydrogen pickup by Zr-based LWR fuel cladding during service leads to the formation of circumferential hydride platelet particles embedded within the Zr matrix. The precipitation of the hydride phase occurs preferentially on the water-side due to the temperature gradient within the clad wall. The non-uniform hydride morphology is known as a rim structure. Significant tensile hoop stresses within the clad wall develop during the fuel lifetime due to fission gas release and pellet-clad mechanical interaction. One potential post-service cladding failure mechanism is delayed hydride cracking (DHC) initiated by hydride reorientation under this tensile hoop stress. As a consequence, hydride reorientation and DHC have been extensively studied over the last few decades to understand the interdependencies of tensile stress, temperature, hydride morphology, and hydrogen concentration. Much of the most recent work in this area has taken advantage of 3. generation synchrotron X-ray sources to perform in situ measurements of hydride phase stability. Neutron scattering based techniques offer unique advantages in the study of hydrogen in metals (typically with deuterium substituted for hydrogen) but are under utilized in the study of hydrides in Zr. We present small-angle neutron scattering (SANS) measurements of the deuteride phase in Zircaloy 4 (Zy4) here. The SANS measurements presented here demonstrate the sensitivity of the technique to deuteride phase particles embedded in a Zy4 matrix. Quantifiable net scattering at 50 wppm effective hydrogen concentration is derived from a subtraction of a reference sample. This demonstrates that the strong χ phase Porod scattering can be effectively eliminated, revealing the response from the deuteride phase. A similar experimental protocol using small-angle X-ray scattering (SAXS) would likely fail due to poor contrast between the hydride phase and the Zr matrix. Stated in different terms, the SAXS response would be dominated by SPP Porod scattering with unresolvable net scattering from hydride particles. (authors)

36 MATERIALS SCIENCE↗

Direct writing of ferroelectric domains on the x- and y-faces of lithium niobate using a continuous wave ultraviolet laser

Ferroelectric domain reversal has been achieved by scanning a tightly focused, strongly absorbed ultraviolet laser beam across the x- and y-faces of lithium niobate crystals. The domains were investigated by piezoresponse force microscopy. The emergence and width of any domain was found to depend on the scanning direction of the irradiating laser beam with respect to the polar z-axis. Full width and half width domains or no domain formation at all could be achieved for scanning along specific directions. We interpret the results by a direct correlation between the local temperature gradient and the resulting polarization direction.

36 MATERIALS SCIENCE↗