Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

The Uses and Abuses of the Acoustic Analogy in Helicopter Rotor Noise Prediction

This paper is theoretical in nature and addresses applications of the acoustic analogy in helicopter rotor noise prediction. It is argued that in many instances the acoustic analogy has not been used with care in rotor noise studies. By this it is meant that approximate or inappropriate formulations have been used. By considering various mechanisms of noise generation, such abuses are identified and the remedy is suggested. The mechanisms discussed are thickness, loading, quadrupole, and blade-vortex interaction noise. The quadrupole term of the Ffowcs Williams-Hawkings equation is written in a new form which separates the contributions of regions of high gradients such as shock surfaces. It is shown by order of magnitude studies that such regions are capable of producing noise with the same directivity as the thickness noise. The inclusion of this part of quadrupole sources in current acoustic codes is quite practical. Some of the difficulties with the use of loading noise formulations of the first author in predictions of blade-vortex interaction noise are discussed. It appears that there is a need for development of new theoretical results based on the acoustic analogy in this area. Because of the impulsive character of the blade surface pressure, a time scale of integration different from that used in loading and thickness computations must he used in a computer code for prediction of blade-vortex interaction noise.

Farassat, F.↗

Computational Evaluation of the Steady and Pulsed Jet Effects on the Performance of a Circulation Control Wing Section

Circulation Control technology is a very effective way of achieving high lift forces required by aircraft during take-off and landing. This technology can also directly control the flow field over the wing. Compared to a conventional high-lift system, a Circulation Control Wing (CCW) can generate comparable or higher lift forces during take-off/landing with fewer or no moving parts and much less complexity. In this work, an unsteady three-dimensional Navier-Stokes analysis procedure has been developed and applied to Circulation Control Wing configurations. The effects of 2-D steady jets and 2-D pulsed jets on the aerodynamic performance of CCW airfoils have been investigated. It is found that a steady jet can generate very high lift at zero angle of attack without stall, and that a small amount of blowing can eliminate vortex shedding at the trailing edge, a potential noise source. It is also found that a pulsed jet can achieve the same high lift as a steady jet at lower mass flow rates, especially at a high frequency, and that the Strouhal number has a more dominant effect on the pulsed jet performance than just the frequency or the free-stream velocity.

Liu, Yi↗

Tracking Blade Tip Vortices for Numerical Flow Simulations of Hovering Rotorcraft

Blade tip vortices generated by a helicopter rotor blade are a major source of rotor noise and airframe vibration. This occurs when a vortex passes closely by, and interacts with, a rotor blade. The accurate prediction of Blade Vortex Interaction (BVI) continues to be a challenge for Computational Fluid Dynamics (CFD). Though considerable research has been devoted to BVI noise reduction and experimental techniques for measuring the blade tip vortices in a wind tunnel, there are only a handful of post-processing tools available for extracting vortex core lines from CFD simulation data. In order to calculate the vortex core radius, most of these tools require the user to manually select a vortex core to perform the calculation. Furthermore, none of them provide the capability to track the growth of a vortex core, which is a measure of how quickly the vortex diffuses over time. This paper introduces an automated approach for tracking the core growth of a blade tip vortex from CFD simulations of rotorcraft in hover. The proposed approach offers an effective method for the quantification and visualization of blade tip vortices in helicopter rotor wakes. Keywords: vortex core, feature extraction, CFD, numerical flow visualization

Numerical↗

Variation in supercurrent connectivity and vortex pinning of state-of-the-art pulsed laser deposited RE Ba 2 Cu 3 O 7- x coated conductors

REBa 2 Cu 3 O 7-x (REBCO, RE: rare earth) coated conductors (CCs) suffer from great critical current I c differences between different manufacturers, I c variations within individual manufacturers, and often significant lengthwise fluctuations. The understanding of such variations is complicated by the lack of a direct correlation between I c and the critical current density J c . In fact, although J c is the fundamental property determined by the local vortex pinning landscape, I c is often limited by variable current blocking mechanisms. An important practical complexity is commercial practices of performing J c and I c evaluations based on I c at 77 K and self-field (sf), where connectivity variation dominates over vortex pinning variations. However, at higher fields and lower temperatures, vortex pinning becomes more complex and highly variable, making predictions of I c and J c at arbitrary temperature T, magnetic field H, and field orientation θ, quite uncertain. To address some aspects of this problem, we conducted detailed spool-to-spool performance characterization on recently manufactured REBCO CCs. Despite J c (77 K, sf) varies by only ∼11%, J c (77 K, 1 T) of its minimum and maximum (for H//ab-plane) show variations of ∼21% and ∼32%, respectively. This emphasizes the shortcoming in using J c (77 K, sf) as parameter for evaluating even the low field performance. An even more remarkable spool-to-spool J c variation of ∼68% was observed at 20 K and 15 T for H//ab-plane. To identify the origin of such lack of reproducibility we performed microstructural characterizations, which revealed, within the REBCO layer, large variation in the density of copper oxide (CuO x ) particles ranging from 0.1 to 2 μm in size. We believe that they play a decisive role in reducing the effective cross-section of the REBCO layer by not simply blocking current themselves, but also by nucleating off-axis REBCO grains, whose misoriented grain boundaries adversely impact REBCO grain-to-grain connectivity. The REBCO growth associated with high density CuO x particles also leads to the more disordered spatial arrangement of BaHfO 3 precipitate arrays, which, when self-aligning along the ab-planes, generate stronger pinning enhancing J c (H//ab) at all temperatures. In this way, we established that variations of both connectivity and vortex pinning are thus directly coupled. Our results also explain why the so-called ‘lift-factor’, typically defined by the ratio between I c (T, H) and I c (77 K, sf), frequently turns out to be unreliable.

36 MATERIALS SCIENCE↗

Streamwise Vorticity Generation in Laminar and Turbulent Jets

Complex streamwise vorticity fields are observed in the evolution of non-circular jets. Generation mechanisms are investigated via Reynolds-averaged (RANS), large-eddy (LES) and direct numerical (DNS) simulations of laminar and turbulent rectangular jets. Complex vortex interactions are found in DNS of laminar jets, but axis-switching is observed only when a single instability mode is present in the incoming mixing layer. With several modes present, the structures are not coherent and no axis-switching occurs, RANS computations also produce no axis-switching. On the other hand, LES of high Reynolds number turbulent jets produce axis-switching even for cases with several instability modes in the mixing layer. Analysis of the source terms of the mean streamwise vorticity equation through post-processing of the instantaneous results shows that, complex interactions of gradients of the normal and shear Reynolds stresses are responsible for the generation of streamwise vorticity which leads to axis-switching. RANS computations confirm these results. k - epsilon turbulence model computations fail to reproduce the phenomenon, whereas algebraic Reynolds stress model (ASM) computations, in which the secondary normal and shear stresses are computed explicitly, succeeded in reproducing the phenomenon accurately.

Demuren, Aodeji O.↗

A Numerical Investigation of the Multiple Vortex Phenomenon: Vortex Number and Structure as a Function of Swirl Ratio

A numerical investigation of the multiple vortex phenomenon (MVP) for tornado like flows is conducted to determine the conditions for when a vortex becomes unstable and divides into smaller subsidiary vortices, as well as to determine the structure of these vortices. A three dimensional numerical model developed by Rotunno (1983) is utilized which has been demonstrated to successfully simulate MVP with properties observed both in natural as well as laboratory tornado like vortices. The MVP is generated for several swirl ratio conditions in order to determine the number of vortices generated for those flow configurations. These results are then compared to experimental measurements to validate the numerical model. The number of vortices produced is consistent with observational results made in the Purdue tornado vortex chamber. Furthermore, horizontal and vertical cross sections are taken through the vortices to determine the structure of MVP. Preliminary results indicate that tangential velocities within these smaller asymmetric vortices increase by 20% over values observed in a single axisymmetric vortex at the same swirl ratio.

Smith, D. R.↗

On the Connection Between Flap Side-Edge Noise and Tip Vortex Dynamics

The goal of the present work is to investigate how the dynamics of the vortical flow about the flap side edge of an aircraft determine the acoustic radiation. A validated lattice- Boltzmann CFD solution of the unsteady flow about a detailed business jet configuration in approach conditions is used for the present analysis. Evidence of the connection between the noise generated by several segments of the inboard flap tip and the aerodynamic forces acting on the same segments is given, proving that the noise generation mechanism has a spatially coherent and acoustically compact character on the scale of the flap chord, and that the edge-scattering effects are of secondary importance. Subsequently, evidence of the connection between the kinematics of the tip vortex system and the aerodynamic force is provided. The kinematics of the dual vortex system are investigated via a core detection technique. Emphasis is placed on the mutual induction effects between the two main vortices rolling up from the pressure and suction sides of the flap edge. A simple heuristic formula that relates the far-field noise spectrum and the cross-spectrum of the unsteady vortical positions is developed.

Casalino, D.↗

Vorticity generation mechanisms in parallel injection schemes for supersonic mixing

A numerical study is reported of the three-dimensional nonreacting supersonic flow field produced by three parallel fuel injection schemes. Such injections are being considered as a means of enhancing fuel mixing in future Scramjet engine designs. The strength of vortex structures produced by ramp injectors and by rocket/jet interactions are quantified and their relative effectiveness in enhancing the fuel mixing process is addressed. An experimental setup for validation of the above numerical results has been constructed and preliminary results are presented. For the flow field parameters chosen, the ramp generated vorticity is found to be considerably larger than that generated by the shock. The unsteady recirculating flow field in the wake of the injector appears also to give rise to important additional vorticity and mixing.

Donohue, James M.↗

Leading-edge 'Vortex Flaps' for enhanced subsonic aerodynamics of slender wings

The 'Vortex Flap' is a novel concept aimed at reducing the lift-dependent drag due to leading-edge flow separation on highly swept, slender wings at high angles of attack. The suction effect of coiled vortices generated via controlled separation over leading-edge flap surfaces is utilized to produce an aerodynamic thrust component. This principle was verified through wind-tunnel experiments on 74-deg and 60-deg delta wings and a supersonic-cruise slender wing aircraft configuration. Adaptation of the vortex-flap for augmentation of roll-control on the 74-deg delta at high angles of attack also was demonstrated. Selected results are presented in this paper to indicate the potential of the vortex flap concept to enhance the low-speed performance, stability and control of slender wing aircraft.

Rao, D. M.↗

Hybrid structured/unstructured grid computations for the F/A-18 at high angle of attack

At high angles of attack, vortical flows play a crucial role in the maintenance of lift for fighter aircraft. However, under certain conditions, the vortical flow can have an adverse effect on the aircraft. On the F/A-18 the LEX vortex can impinge on the tail; at high angles of attack the unsteady flow from vortex bursting can cause structural fatigue on the vertical tails. At high angles of attack, the flow field can be quite complex, and a computational analysis challenging. A full configuration analysis with viscous structured grids can be computationally expensive and the task of generating the requisite grids can be quite difficult. To mitigate these difficulties and provide a medium-fidelity analysis tool, a hybrid structured/unstructured approach was adopted for this work. In this analysis, the formation and roll-up of the LEX vortex is computed with a structured Navier-Stokes solver, and the resulting vortex propagated downstream with an unstructured Euler solver.

Robert T Biedron↗

The relationship of unsteadiness in downwash to the quality of parameter estimates

This paper investigates the relative importance of including unsteady effects in the lift and downwash in the longitudinal dynamics and parameter extraction algorithm. A simple vortex system has been used to model unsteady aerodynamic effects into the longitudinal equations of motion of an aircraft. Computer-generated data and flight data were used to demonstrate that inclusion of unsteady aerodynamics in the parameter-extraction algorithm produced aerodynamic parameters that were different from those extracted when unsteady aerodynamics were left out of the algorithm. The differences between derivatives associated with the two extraction algorithms (with and without unsteady aerodynamics) were related to acceleration derivatives which usually cannot be extracted individually.

Wells, W. R.↗

Works on theory of flapping wing

It is shown mathematically that taking account of the boundary layer is the only way to develop a theory of flapping wings without violating the basic observations and mathematics of hydromechanics. A theory of thrust generation by flapping wings can be developed if the conventional downstream velocity discontinuity surface is replaced with the observed Karman type vortex streets behind a flapping wing. Experiments show that the direction of such vortices is the reverse of that of conventional Karman streets. The streets form by breakdown of the boundary layer. Detailed analysis of the movements of certain birds and insects during flight 'in place' is fully consistent with this theory of the lift, thrust and drag of flapping wings. Further directions for research into flight with flapping wings are indicated.

Golubev, V. V.↗

Noise radiation from the side edges of flaps

The recently observed phenomenon of high noise radiation from the side edges of flaps in flow is investigated by way of a simple two-dimensional model problem. The model is based upon a physical picture of boundary layer vorticity being swept around the edge by spanwise flow on the flap. The model problem is developed and solved and the resulting noise radiation calculated. Further, a mathematical condition for the vortex to be captured by the potential flow and swept around the edge is derived. The results show that the sound generation depends strongly upon the strength of the vorticity and distance from the edge and that it can be more intense than the more common trailing edge noise source in agreement with the experimental observations.

Hardin, J. C.↗

Control of vortical separation on conical bodies

In a variety of aeronautical applications, the flow around conical bodies at incidence is of interest. Such applications include, but are not limited to, highly maneuverable aircraft with delta wings, the aerospace plane and nose portions of spike inlets. The theoretical model used has three parts. First, the single line vortex model is used within the framework of slender body theory, to compute the outer inviscid field for specified separation lines. Next, the three dimensional boundary layer is represented by a momentum equation for the cross flow, analogous to that for a plane boundary layer; a von Karman Pohlhausen approximation is applied to solve this equation. The cross flow separation for both laminar and turbulent layers is determined by matching the pressure at the upper and lower separation points. This iterative procedure yields a unique solution for the separation lines and consequently for the position of the vortices and the vortex lift on the body. Lastly, control of separation is achieved by blowing tangentially from a slot located along a cone generator. It is found that for very small blowing coefficients, the separation can be postponed or suppressedy completely.

Mourtos, Nikos J.↗

A general approach for the prediction of localized instability generation in boundary layer flows

The present approach to the prediction of instability generation that is due to the interaction of freestream disturbances with regions of subscale variations in surface boundary conditions can account for the finite Reynolds number effects, while furnishing a framework for the study of receptivity in compressible flow and in 3D boundary layers. The approach is illustrated for the case of Tollmien-Schlichting wave generation in a Blasius boundary layer, due to the interaction of a freestream acoustic wave with a localized wall inhomogeneity. Results are presented for the generation of viscous and inviscid instabilities in adverse pressure-gradient boundary layers, supersonic boundary layer instabilities, and cross-flow vortex instabilities.

Choudhari, Meelan↗

Forced Diffusion of Trailing Vorticity from a Hovering Rotor

A small turbulence generating device was Attached near the tip of a hovering rotor blade In order to alter the structure of the trailing vortex. Stereo particle image velocimetry (PIV) images were used to quantify the wake behind the rotor blade during the first revolution. An analysis of the 3D-velocity field includes a method for accounting for vortex wander. The results show that a major change in the size and intensity of the trailing vortex can be achieved.

McAlister, Kenneth W.↗

Wind Tunnel Investigation of Ground Wind Loads for Ares Launch Vehicle

A three year program was conducted at the NASA Langley Research Center (LaRC) Aeroelasticity Branch (AB) and Transonic Dynamics Tunnel (TDT) with the primary objective to acquire scaled steady and dynamic ground-wind loads (GWL) wind-tunnel data for rollout, on-pad stay, and on-pad launch configurations for the Ares I-X Flight Test Vehicle (FTV). The experimental effort was conducted to obtain an understanding of the coupling of aerodynamic and structural characteristics that can result in large sustained wind-induced oscillations (WIO) on such a tall and slender launch vehicle and to generate a unique database for development and evaluation of analytical methods for predicting steady and dynamic GWL, especially those caused by vortex shedding, and resulting in significant WIO. This paper summarizes the wind-tunnel test program that employed two dynamically-aeroelastically scaled GWL models based on the Ares I-X Flight Test Vehicle. The first model tested, the GWL Checkout Model (CM), was a relatively simple model with a secondary objective of restoration and development of processes and methods for design, fabrication, testing, and data analysis of a representative ground wind loads model. In addition, parametric variations in surface roughness, Reynolds number, and protuberances (on/off) were investigated to determine effects on GWL characteristics. The second windtunnel model, the Ares I-X GWL Model, was significantly more complex and representative of the Ares I-X FTV and included the addition of simplified rigid geometrically-scaled models of the Kennedy Space Center (KSC) Mobile Launch Platform (MLP) and Launch Complex 39B primary structures. Steady and dynamic base bending moment as well as model response and steady and unsteady pressure data was acquired during the testing of both models. During wind-tunnel testing of each model, flow conditions (speed and azimuth) where significant WIO occurred, were identified and thoroughly investigated. Scaled data from the Ares I-X GWL model test was used in the determination of worst-case loads for the analysis of Ares I-X FTV design wind conditions. Finally, this paper includes a brief discussion of the limited full-scale GWL data acquired during the rollout and on-pad stay of the Ares I-X FTV that was launched from KSC on October 28, 2009.

Keller, Donald F.↗

Evolution of Dissipative Regimes in Atomically Thin Bi 2 Sr 2 CaCu 2 O 8 + x Superconductor

Thermoelectric transport is widely used to study Abrikosov vortex dynamics in unconventional superconductors. However, only a few thermoelectric studies have been conducted near the dimensional crossover that occurs when the vortex-vortex interaction length scale becomes comparable to the sample size. Here, the effects of finite size on the dissipation mechanisms of the Nernst effect in the optimally doped Bi 2 Sr 2 CaCu 2 O 8 + x high-temperature superconductor are reported, down to the atomic length limit. To access this regime, a new generation of thermoelectric chips based on silicon nitride microprinted circuit boards is developed. These chips ensure optimized signals while preventing sample deterioration. The results demonstrate that lateral confinement at the nanoscale can effectively reduce vortex dissipation. Investigating vortex dissipation at the micro- and nano-scale is essential for creating stable, miniaturized superconducting circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗