Search NASA⌕ Search

SEARCH · Search NASA

Results for “BURNING PROCESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

A search for lithium in Pleiades brown dwarf candidates using the Keck hires echelle

We report Keck Observatory high-resolution echelle spectra of lithium at 670.8 nm in two of the lowest luminosity brown dwarf candidates in the Pleiades. These objects have estimated masses of 0.055 to 0.059 solar mass from their location on a color-magnitude diagram relative to theoretical isochrones. Stellar interior models predict that Li has not burned in them. However, we find no evidence of the Li line, at limits 100 to 1000 times below the initial abundance. This indicates that Li has in fact been depleted, presumably by nuclear processing as occurs in Pleiades stars. Interior models suggest that such large Li depletion occurs only for objects with M greater than 0.09 solar mass at the age of the Pleiades. Thus, it is unlikely that the candidates are brown dwarfs. The brown dwarf candidates present a conflict: either they have masses greater than suggested from their placement on the H-R diagram, or they do have the very low suggested masses but are nonetheless capable of destroying Li, in only 70 Myr. Until this dilemma is resolved, the photometric identification of brown dwarfs will remain difficult. Resolution may reside in higher T(sub eff) derived from optical and IR colors or in lower T(sub eff) in the interior models.

Marcy, Geoffrey W.↗

Ion Chemistry in Atmospheric and Astrophysical Plasmas

There are many differences and also remarkable similarities between the ion chemistry and physics of planetary ionospheres and the ion chemistry and physics of astronomical environments beyond the solar system. In the early Universe, an expanded cooling gas of hydrogen and helium was embedded in the cosmic background radiation field and ionized by it. As the Universe cooled by adiabatic expansion, recombination occurred and molecular formation was driven by catalytic reactions involving the relict electrons and protons. Similar chemical processes are effective in the ionized zones of gaseous and planetary nebulae and in stellar winds where the ionization is due to radiation from the central stars, in the envelopes of supernovae where the ionization is initiated by the deposition of gamma-rays, in dissociative shocks where the ionization arises from electron impacts in a hot gas and in quasar broad-line region clouds where the quasar is responsible for the ionization. At high altitudes in the atmospheres of the Jovian planets, the main constituents are hydrogen and helium and the ion chemistry and physics is determined by the same processes, the source of the ionization being solar ultraviolet radiation and cosmic rays. After the collapse of the first distinct astronomical entities to emerge from the uniform flow, heavy elements were created by nuclear burning in the cores of the collapsed objects and distributed throughout the Universe by winds and explosions. The chemistry and physics became more complicated. Over 90 distinct molecular species have been identified in interstellar clouds where they are ionized globally by cosmic ray impacts and locally by radiation and shocks associated with star formation and evolution. Complex molecules have also been found in circumstellar shells of evolved stars. At intermediate and low altitudes in the Jovian atmospheres, the ion chemistry is complicated by the increasing abundance of heavy elements such as carbon, and an extensive array of complex molecules has been predicted. Reactions involving heavy elements dominate the structure of the ionspheres of the terrestrial planets and the satellites Titan and Triton.

Dalgarno, A.↗

Venus and Beyond Using the Ariane ASAP Launch Capability

The cost of executing planetary missions in the next ten years is expected to decrease significantly. The principle reason is that new technology is reducing spacecraft mass while increasing capability. Another reason is that launch costs are expected to decrease. A move in this direction is to permit important planetary missions to fly as secondary payloads, and this opportunity is now provided by the French on the Ariane 5 using the Ariane Structure for Auxiliary Payloads (ASAP). The ASAP will fly on GEO missions, and can boost up to eight 100 kg (or 200 kg, if paired) payloads into the elliptical geosynchronous transfer orbit (GTO), which delivers large communication satellites to GEO. An efficient multi-burn method has been developed by this author to deliver these small spacecraft from GTO to Mars and other destinations. This method, referred to here as Moon-Earth Gravity Assist (MEGA), requires 3 or more major maneuvers together with close flybys of the earth and moon. An example for a Mars 2003 mission (not to scale) is shown in Figure 1, where, once in GTO, the first burn sends the spacecraft beyond the Moon to a distance of 1.2 million kilometers. At apogee, the second burn targets to an encounter with the Moon such that a swingby returns the spacecraft to the Earth with a 300 km perigee, and with an inclination such that a perigee burn will send the spacecraft off to Mars with the required escape velocity vector. Details of this method, specifically for Mars missions, can be found in Reference 3. A similar strategy works for Venus, with some caveats. This method is required to work for any Ariane 5 launch date over a three month period, to ensure a high probability of getting off the ground. The launch period is provided by fixing the Earth escape date (3rd burn), but allowing the high ellipse (beyond the Moon) period to vary by one or two months, and also allowing a one to two month wait time in GTO (or other orbit) before the first burn is performed. Figure 2 shows the trajectory profiles for the early and late GTO launch dates for a Mars 2003 mission. Venus. which is an inner planet, poses special problems for the MEGA process. The escape direction is reverse that of Earth's motion, and the GTO apogee arrival

Penzo, Paul A.↗

COVID-19 Lockdowns Drive Decline in Active Fires in Southeastern United States

Fire is a common ecosystem process in forests and grasslands worldwide. Increasingly, ignitions are controlled by human activities either through suppression of wildfires or intentional ignition of prescribed fires. The Southeastern United States leads the nation in prescribed fire, burning ca. 80% of the countries extent annually. The COVID-19 pandemic radically changed human behavior as workplaces implemented social-distancing guidelines and provided an opportunity to evaluate relationships between humans and fire as fire management plans were postponed or cancelled. Using active fire data from satellite-based observations, we found that in the Southeastern United States, COVID-19 led to a 21% reduction in fire activity compared to the 2003-2019 average. The reduction was more pronounced for federally managed lands, up to 41% below average compared to the past 20-years (38% below average compared to the past decade). Declines in fire activity were partly affected by an unusually wet February before the COVID-19 shutdown began in mid-March 2020. Despite the wet spring, the predicted number of active fire detections was still lower than expected, confirming a COVID-19 signal on ignitions. In addition, prescribed fire management statistics, reported by US federal agencies, confirmed the satellite observations, and showed that following the wet February and before the mid-March COVID-19 shutdown, cumulative burned area was approaching record highs across the region. With fire return intervals in the Southeastern United States as frequent as 1-2 years, COVID-19 fire impacts will contribute to an increasing backlog in necessary fire management activities, affecting biodiversity and future fire danger.

Biological Sciences↗

Long Term Stability Testing Results for Savannah River Site Organic and Aqueous Waste streams

The U.S. Department of Energy (DOE) has tasked MSE Technology Applications, Inc. (MSE) with evaluating the long-term stability of various commercially available sorbent materials to solidify two organic surrogate waste streams (both volatile and nonvolatile), a volatile organic waste stream with a residual aqueous phase, an aqueous waste stream, and an aqueous waste stream with a residual organic phase. The Savannah River Site (SRS) legacy plutonium/uranium extraction (PUREX) process waste and the F-Canyon PUREX waste constituted the volatile organic wastes and various oils constituted the nonvolatile organic waste stream. The aqueous waste streams included a rainwater waste stream and an aqueous organic waste stream. MSE also evaluated the PUREX waste stream with a residual aqueous component with and without aqueous-type sorbent materials. Based on testing performed at MSE, the rainwater waste stream was successfully solidified by SRS personnel using two different sorbents. Several small oil wastes were also successfully solidified by SRS personnel using granular clay sorbents based on information provided by MSE from the oils waste stream testing and 75,706 Liters (L) [20,000 gallons (gal)] of the F-Canyon PUREX waste was solidified at Waste Consolidation Specialists (WCS). Solidification of the various surrogate waste streams listed above was performed from 2004 to 2006 at the MSE testing and evaluation facility located at the Mike Mansfield Advanced Technology Center in Butte, Montana. This paper summarizes the comparison of the initial liquid release testing (LRT) values with LRT results obtained over three years later in an attempt to understand the long-term stability characteristics of the solidified waste streams. The paper also includes solidification results for B-25 box samples generated late in 2005. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Estimation of graphite density and mechanical strength variation of VHTR during air-ingress accident

An air-ingress accident in a Very High Temperature Gas-Cooled Reactor (VHTR) is anticipated to cause severe changes to graphite density and mechanical strength by an oxidation process that has many side effects. However, quantitative estimations have not yet been performed. This study focuses on predicting the changes in graphite density and mechanical strength via thermal hydraulic system analysis code. In order to analyze the change in graphite density, a simple graphite burn-off model was developed. The model is based on the similarities between a parallel electrical circuit and graphite oxidation. It was used to determine overall changes in the graphite’s geometry and density. The model was validated by comparing its results to experimental data that was obtained for several temperatures. In the experiment, cylindrically shaped graphite specimens were oxidized in an electrical furnace and the variations of its mass were measured against time. The experiment’s range covered temperatures between 6000C and 9000 C. Experimental data validated the model’s accuracy. Finally, the developed model along with other comprehensive graphite oxidation models was integrated into the VHTR system analysis code, GAMMA. GT-MHR 600 MWt reactor was selected as a reference reactor. Based on the calculation, the main oxidation process was observed 5.5 days after the accident when followed by natural convection. The core maximum temperature reached 16000 C, but never exceeded the maximum temperature criteria, 18000 C. However, the oxidation process did significantly decrease the density of bottom reflector, making it vulnerable to mechanical stress. The stress on the bottom reflector is greatly increased because it sustains the reactor core. The calculation proceeded until 11 days after the accident, resulting in an observed 4.5% decrease in density and a 25% reduction of mechanical strength.

99 GENERAL AND MISCELLANEOUS↗

Hanford Waste Physical and Rheological Properties: Data and Gaps - 12078

The retrieval, transport, treatment and disposal operations associated with Hanford Tank Wastes involve the handling of a wide range of slurries. Knowledge of the physical and rheological properties of the waste is a key component to the success of the design and implementation of the waste processing facilities. Previous efforts to compile and analyze the physical and rheological properties were updated with new results including information on solids composition and density, particle size distributions, slurry rheology, and particle settling behavior. The primary source of additional data is from a recent series of tests sponsored by the Hanford Waste Treatment and Immobilization Plant (WTP). These tests involved an extensive suite of characterization and bench-scale process testing of 8 waste groups representing approximately 75% of the high-level waste mass expected to be processed through the WTP. Additional information on the morphology of the waste solids was also included. Based on the updated results, a gap analysis to identify gaps in characterization data, analytical methods and data interpretation was completed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

CCN1 accelerates re-epithelialization by promoting keratinocyte migration and proliferation during cutaneous wound healing

Highlights: • Re-epithelialization is the restoration of skin integrity following injury. • CCN family member 1 (CCN1) is upregulated in the early stages following injury. • CCN1 promotes human primary keratinocyte migration and proliferation. • Topical CCN1 application stimulates re-epithelialization in mouse burn models. • CCN1 is more potent than bFGF in initiating re-epithelialization. Re-epithelialization is an essential part of wound healing and has a prominent influence on the prognosis. CCN family member 1 (CCN1 or Cysteine-rich 61, CYR61), a matricellular protein, has a potential role in the wound healing process. However, its role in re-epithelialization remains unclear. The aim of this study was to determine the expression of CCN1 in the epidermis and its effect on keratinocytes during re-epithelialization. CCN1 expression in the wounded skin was analyzed using microarray data from GEO database and detected by immunofluorescence. The results showed upregulated CCN1 during the early stages of wound healing. Human primary keratinocytes were treated with recombinant human CCN1. The results showed that CCN1 promoted keratinocyte migration and proliferation. Moreover, a full-thickness mouse skin wound model and a superficial second-degree burn mouse model treated intracutaneously with CCN1 were used for in vivo studies. Topical treatment with CCN1 protein accelerated wound closure and re-epithelialization. Additionally, longer newly-formed epithelium tongue and elevated expression of PCNA and Ki67 were detected in the CCN1-treated group 4 days post-burn. These results indicate that CCN1 accelerates re-epithelialization by promoting keratinocyte migration and proliferation, and may serve as a novel target to promote re-epithelialization.

60 APPLIED LIFE SCIENCES↗

Irradiation of Miniature Fuel Specimens in the High Flux Isotope Reactor

The Advanced Fuels Campaign (AFC) within the US Department of Energy (DOE) Office of Nuclear Energy is considering several advanced ceramic fuels for use in light water reactors (LWRs) and/or advanced reactor concepts. Advanced fuels, such as uranium carbide (UC), uranium nitride (UN), and uranium silicide (U 3 Si 2 ) offer increased uranium density and enhanced thermophysical properties compared to conventional UO 2 fuel, while maintaining an acceptably high melting point. Enhancements to traditional UO 2 are also being considered that would increase the thermal conductivity of the fuel and fission product retention through various additives. However, some of these advanced fuels have very limited information available on their irradiation performance (microstructural evolution, swelling, fission gas release, etc.), particularly for the range of temperature and burnup that are relevant for LWR fuel pins. To address this issue, Oak Ridge National Laboratory has developed an experimental facility to irradiate miniature fuel specimens in the High Flux Isotope Reactor (HFIR). The small size of the fuel specimens simplifies the design, analysis, and post-irradiation evaluations. Post-irradiation examination will provide basic data on the stability and behavior of advanced fuels as a function of temperature and burnup. This report briefly summarizes the experiment facility design concept and the assembly of the first set of experiments. The experiment contains six different types of UN-based fuel kernels UN TRISO particles with varying densities, impurity levels, and burnable absorber contents. The experiments were successfully assembled, welded, evaluated, and delivered to the HFIR along with a complete quality assurance fabrication package. Pictures of the assembly process are included in this report. The experiment is planned for insertion into the HFIR during cycle 480 (June 2018).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

On the mechanisms responsible for high-latitude thermospheric composition variations during the recovery phase of a geomagnetic storm

The causal mechanisms for the recovery of the perturbed high-latitude thermospheric composition to the unperturbed state in the period following a geomagnetic storm are investigated. Model runs of the NCAR thermosphere/ionosphere GCM (TIGCM) and thermosphere GCM are used to calculate the averaged mass mixing ratio variations and the forcing terms responsible for these variations during the recovery phase of a geomagnetic storm. High latitude compositional recovery is found to occur in the NCAR TIGCM on a time scale of about 12 hr to 1 day. This time scale is in agreement with previously observed time scales for typical poststorm F region electron density recoveries. Neither molecular diffusion nor large-scale horizontal advection is the dominant process in determining the compositional state during the recovery period. Thermospheric compositional recovery at high geomagnetic latitudes is driven primarily by vertical advection.

Burns, A. G.↗

Physical processes in planetary rings

A summary of research performed in 1990 is presented. The subject areas covered include perturbed narrow rings and the dynamics of circumplanetary dust. Progress made in the area of perturbed narrow rings includes: (1) the possible discovery of an undocumented moonlet in the environs of Saturn's F ring; and (2) the investigation of the consequences of a close satellite perturbing a narrow ring using numerical simulation. Progress made in the area of circumplanetary dust includes: (1) studies of the motion of circumplanetary dust under the action of radiation pressure and various electromagnetic processes; and (2) the initiation of a systematic explanation of the curious consequences of some of the perturbations that act on small particles.

Burns, Joseph A.↗

Role of Fusion Product Measurements in Physics Understanding of a Burning Plasma

The roles of fusion products in diagnosing plasmas are quite diversified and rich in scientific content. From the early days to the new frontier of burning plasmas, the study of fusion products has allowed a deeper understanding of the physics found in these plasmas, spanning all configurations, in both magnetic and inertial confinement. In many early experiments, the measurement of plasma performance was based almost entirely on neutron yield measurements. Since then, the capability to measure fusion products has grown tremendously, and many new measuring techniques have been successfully tested and used in experiments. The first role is based on single-particle diagnosis, which can yield important information on performance, confinement, source and current profiles, plasma fluctuations, effects of ripples, MHD mode structure, etc. The second role, which has expanded tremendously in the last few years, includes the diagnosis of collective effects, which can yield additional information on instabilities, heating, and many others. This scientific capability is enhanced by the large number of fusion products (neutrons, charged particles, gammas) generated by the primary or secondary fusion processes such as the commonly studied, D+D, D+T and D+{sup 3}He reactions. This paper will review the applications of fusion product measurements used in the scientific study of plasma confinement and stability, and will describe the prospects and opportunities offered in burning plasma experiments such as ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First Look at Smoke Emissions from Prescribed Burns in Long-unburned Longleaf Pine Forests

While fire has long played a role in the longleaf pine ecosystem, there are still some stands in the southeastern United States where fire has not been reintroduced and fuels have accumulated for 50 years or more. As part of a larger study examining fuel loading and smoke emissions on Department of Defense installations in the southeastern U.S., fuels and trace emissions were measured during three prescribed burns at Ft. Jackson Army Base near Columbia, South Carolina in November 2011. These pine-forest understory fires provided valuable emissions data for fires that burned in stands that had little or no exposure to fire for decades. Smoke emissions were measured on the ground and from an aircraft by scientists from a large team of atmospheric researchers. (Akagi et al., 2013) To characterize initial emissions in the lofted plume and in point sources of residual smoldering combustion, trace-gas species were measured using an airborne FTIR and a ground-based FTIR, respectively. Whole-air sampling canisters were also collected from both ground- and airborne-based platforms. A total of 97 trace gases were quantified in this work, largely via infrared spectroscopy. Selected emissions data were compared with similar data collected from prescribed burns sampled in coastal North Carolina in 2010 in younger fuels beds of loblolly/longleaf stands near Camp Lejeune (Burling et al., 2011). The emission factors measured in this work differ by ~13-195% to EF measured from the managed stands at Camp Lejeune for organic and N-containing species, suggesting that fire emissions in similar ecosystems can exhibit large variability. Part of the differences, however, may be ascribed to burn conditions as well since the NC burns were during the wet season whereas the SC stands were burned after an extended drought. We also report the first detailed FTIR emissions data for a suite of monoterpenes. Figure 1 displays the emission factors (g/kg fuel) for several monoterpenes and isoprene as measured by the ground-based FTIR system. Due to their unsaturated structure, terpenes are highly reactive compounds emitted from plants thought to contribute to secondary organic aerosol formation (SOA) (Saathoff et al., 2009; Hennigan et al., 2011) and the formation of small oxygenated volatile organic compounds (OVOCs) (Jacob et al., 2002) in fire plumes. The known chemistry and measured abundance of monoterpenes suggests that these species impacted secondary plume processes including ozone, OVOC, and SOA formation in sampled plumes within the first few hours after emission.

biomass burning↗

Principal components technique analysis for vegetation and land use discrimination

Automatic pre-processing technique called Principal Components (PRINCO) in analyzing LANDSAT digitized data, for land use and vegetation cover, on the Brazilian cerrados was evaluated. The chosen pilot area, 223/67 of MSS/LANDSAT 3, was classified on a GE Image-100 System, through a maximum-likehood algorithm (MAXVER). The same procedure was applied to the PRINCO treated image. PRINCO consists of a linear transformation performed on the original bands, in order to eliminate the information redundancy of the LANDSAT channels. After PRINCO only two channels were used thus reducing computer effort. The original channels and the PRINCO channels grey levels for the five identified classes (grassland, "cerrado", burned areas, anthropic areas, and gallery forest) were obtained through the MAXVER algorithm. This algorithm also presented the average performance for both cases. In order to evaluate the results, the Jeffreys-Matusita distance (JM-distance) between classes was computed. The classification matrix, obtained through MAXVER, after a PRINCO pre-processing, showed approximately the same average performance in the classes separability.

Parada, N. D. J.↗

Passive SCR Performance Under Pseudo-Transient Cycle: Challenges and Opportunities for Meeting Tier 3 Emissions

We report that the passive ammonia (NH 3 ) selective catalytic reduction (SCR) system is a potential approach for controlling nitrogen oxide (NOx) emissions from lean-burn gasoline engines based on utilizing NH 3 generated by a three-way catalyst (TWC) during brief periods of fuel-rich engine operation. NH 3 generated by the TWC is stored and available to reduce NOx on a downstream SCR catalyst during subsequent periods of lean engine operation. Control of the overall passive SCR process can be more challenging than current urea-based approach because it depends explicitly on fuel-rich engine operation, which must be implemented in the context of transient engine operation. Under transient engine operation, significant variation in SCR temperatures is also to be expected. With NH 3 storage capacity highly dependent on exhaust temperatures, proper system architecture and engine operating strategy are needed for effective NH 3 utilization over the SCR catalyst. In this study, the performance of a passive SCR system was evaluated on a 2.0-l BMW lean-burn gasoline direct injection engine under 6-mode pseudo-transient cycle. The aim of this work is to understand how various engine operating strategies change the dynamics of NH 3 generation and utilization, and NOx reduction in the passive SCR system. A 5.9% fuel economy improvement relative to stoichiometric-only operation with 0.018 g/mi of NOx + NMHC emissions were demonstrated over 6-mode pseudo-transient cycle; however, CO emissions were twice the emission standard. In conclusion, the results of this work reveal challenges and opportunities for meeting Tier 3 emissions and improving fuel savings benefits.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fokker–Planck kinetic modeling of suprathermal α-particles in a fusion plasma

We present an ion kinetic model describing the transport of suprathermal α-particles in inertial fusion targets. The analysis of the underlying physical model enables us to develop efficient numerical methods to simulate the creation, transport and collisional relaxation of fusion reaction products (α-particles) at a kinetic level. The model assumes spherical symmetry in configuration space and axial symmetry in velocity space around the mean flow velocity. A two-energy-scale approach leads to a self-consistent modeling of the coupling between suprathermal α-particles and the thermal bulk of the imploding plasma. This method provides an accurate numerical treatment of energy deposition and transport processes involving suprathermal particles. The numerical tools presented here are then validated against known analytical results. This enables us to investigate the potential role of ion kinetic effects on the physics of ignition and thermonuclear burn in inertial confinement fusion schemes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Technical properties of biomass and solid recovered fuel (SRF) co-fired with coal: Impact on multi-dimensional resource recovery value

The power plant sector is adopting the co-firing of biomass and solid recovered fuel (SRF) with coal in an effort to reduce its environmental impact and costs. Whereas this intervention contributes to reducing carbon emissions and those of other pollutants related with the burning of fossil fuel, it may also result in hidden impacts that are often overlooked. When co-firing, the physical and chemical properties of the mixed fuels and the subsequent technical implications on the process performance and by-products are significant. Interconnections between multiple values nested within four domains of value, i.e. environmental, economic, technical and social, mean that changes in the one domain (in the co-firing case, the technical one) can have considerable implications in the other domains as well. In this study, using a systematic and flexible approach to conceptualising multi-dimensional aspects associated with the co-firing of biomass and SRF with coal, we unveil examples of such interconnections and implications on overall value delivered through the use and recovery of waste resources. Such an analysis could underpin the selection of useful metrics (quantitative or semi-quantitative descriptors) for enabling a systemic multi-dimensional value assessment, and value’s distribution amongst interconnected parts of resource recovery systems; key in enabling sound analysis and decision-making.

09 BIOMASS FUELS↗

Molecular Characterization of Brown Carbon in Biomass Burning Aerosol Particles

Emissions from biomass burning are a significant source of brown carbon (BrC) in the atmosphere. In this study, we investigate the molecular composition of freshly-emitted biomass burning organic aerosol (BBOA) samples collected during test burns of selected biomass fuels: sawgrass, peat, ponderosa pine, and black spruce. We characterize individual BrC chromophores present in these samples using high performance liquid chromatography coupled to a photodiode array detector and a high-resolution mass spectrometer. We demonstrate that both the overall BrC absorption and the chemical composition of light-absorbing compounds depend significantly on the type of biomass fuels and burning conditions. Common BrC chromophores in the selected BBOA samples include nitro-aromatics, polycyclic aromatic hydrocarbon derivatives, and polyphenols spanning a wide range of molecular weights, structures, and light absorption properties. A number of biofuel-specific BrC chromophores are observed, indicating that some of them may be used as potential markers of BrC originating from different biomass burning sources. On average, ~50% of the light absorption above 300 nm can be attributed to a limited number of strong BrC chromophores, which may serve as representative light-absorbing species for studying atmospheric processing of BrC aerosol. The absorption coefficients of BBOA are affected by solar photolysis. Specifically, under typical atmospheric conditions, the 300 nm absorbance decays with a half-life of 16 hours. A “molecular corridors” analysis of the BBOA volatility distribution suggests that many BrC compounds in the fresh BBOA have low volatility (<1 g m-1) and will be retained in the particle phase under atmospherically relevant conditions.

Environmental Molecular Sciences Laboratory↗