Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Electronic structure and optical responses of nanocrystalline BiGaO{sub 3} films: A combination study of experiment and theory

High-quality nanocrystalline BiGaO{sub 3} (BGO) films have been prepared by a modified sol-gel method. X-ray diffraction analysis shows that the films are polycrystalline and exhibit an orthorhombic structure. The dispersion functions near infrared-ultraviolet region were extracted by fitting spectroscopic ellipsometry with the Tauc-Lorentz model. Moreover, first-principle calculations on dielectric functions and band gap were carried out, which are in good agreement with the experimental results. It was found that BGO belongs to an indirect band gap oxide with the fundamental gap of about 2.17 eV, which is suitable for ferroelectric based photovoltaic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of Y and Ti co-substituted BiFeO{sub 3} multiferroics

Pure and co substituted Bi{sub 1−x}Y{sub x}Fe{sub 1−x}Ti{sub x}O{sub 3} (x ≤ 0.24) ceramics were synthesized by solid state reaction method. X-ray diffraction patterns of Y and Ti codoped samples have shown single phase formation. Increasing Y and Ti concentration reveals structural transition from rhombohedral phase (R3c) for x ≤ 0.16 to orthorhombic phase (Pnma) for x = 0.24. FT-IR spectra exhibit broad absorption bands, which may be due to the overlapping of Fe-O and Bi-O vibrations. UV-visible spectroscopy results show strong absorption of light in the spectral range of 400-720 nm, indicating optical band gap in the visible region for these samples. These interesting optical properties of co-substituted BFO samples in visible region may find potential applications in optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

InAs quantum dot growth on Al{sub x}Ga{sub 1−x}As by metalorganic vapor phase epitaxy for intermediate band solar cells

InAs quantum dot multilayers have been grown using Al{sub x}Ga{sub 1−x}As spacers with dimensions and compositions near the theoretical values for optimized efficiencies in intermediate band photovoltaic cells. Using an aluminium composition of x = 0.3 and InAs dot vertical dimensions of 5 nm, transitions to an intermediate band with energy close to the ideal theoretical value have been obtained. Optimum size uniformity and density have been achieved by capping the quantum dots with GaAs following the indium-flush method. This approach has also resulted in minimization of crystalline defects in the epilayer structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular beam epitaxial growth of Bi{sub 2}Se{sub 3} nanowires and nanoflakes

Topological Insulators are in focus of immense research efforts and rapid scientific progress is obtained in that field. Bi{sub 2}Se{sub 3} has proven to be a topological insulator material that provides a large band gap and a band structure with a single Dirac cone at the Γ-point. This makes Bi{sub 2}Se{sub 3} one of the most promising three dimensional topological insulator materials. While Bi{sub 2}Se{sub 3} nanowires and nanoflakes so far were fabricated with different methods and for different purposes, we here present the first Bi{sub 2}Se{sub 3} nanowires as well as nanoflakes grown by molecular beam epitaxy. The nanostructures were nucleated on pretreated, silicon (100) wafers. Altering the growth conditions nanoflakes could be fabricated instead of nanowires; both with high crystalline quality, confirmed by scanning electron microscopy as well as transmission electron microscopy. These nanostructures have promise for spintronic devices and Majorana fermion observation in contact to superconductor materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and structural properties of Fe-doped SnO{sub 2} nanoparticles prepared by co-precipitation method

Today nanomaterials plays important role in every field, due to their unique mechanical, chemical and electrical properties which are completely different from the bulk materials. With reduction in the size of material its properties are dynamically changed. Semiconductor materials are widely used in electronic devices but in the field of optoelectronic these materials have some limitations. Tin oxide could be the material which could be used in these applications without limitations. Doped Tin Oxide is an oxygen deficient material which could be beneficial for transparent conducting oxide. Iron doped SnO{sub 2} prepared by co-precipitation method. Studies on structural properties of undoped and doped SnO{sub 2} were done by X-ray diffraction. The XRD results have shown that the size of the nanoparticles decreases with Fe doping down to 53nm. Optical Properties were studied by UV-visible spectroscopy. Band gap was found to decrease with increase in iron content in samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optical imprinting of superlattices in two-dimensional materials

We propose a novel optical method to imprint superlattice structures in two-dimensional electronic systems. By changing the shape of the optical field, we synthesize various lattice structures with different spatial symmetry, periodicity, and strength. We find that the wide optical tunability allows one to tune different properties of the effective band structure, including Chern number, energy bandwidths, and band gaps. We consider the high-frequency regime where the electronic system can remain in the quasi-equilibrium phase for an extended amount of time. The spatiotemporal reconfigurablity of our approach opens up new possibilities to control light-matter interaction to generate novel electronic states and optoelectronic devices.

36 MATERIALS SCIENCE↗

Ab initio GGA+U investigations of the structural, electronic, and magnetic properties of Cd 1-x Mn x Te alloy

The structural, electronic and magnetic properties of Cd 1-x Mn x Te alloy in the zinc-blende (ZB) phase within the framework of spin-polarized density functional theory using the generalized gradient approximation (GGA) are studied. In particular, we employ GGA+U SIC method that gives a better description of systems with strong Coulomb correlations of the d-electrons. First, we discuss implementation of GGA+U method to the ground state calculations of pure CdTe and ferromagnetic MnTe. The alloy is modelled at some selected compositions by ordered structures described in terms of periodically repeated supercells for the compositions x = 0.25, 0.5, and 0.75. The compositional dependence of the lattice constant, electronic band structure and partial densities of states of ferromagnetic Cd 1-x Mn x Te alloy are studied. We estimate the spin-exchange splitting energies produced by the Mn 3d-states and determine the exchange constants for the conduction and valence bands of the alloy. The energy positions of the occupied and unoccupied Mn 3d-bands in the electronic structure of ferromagnetic Cd 1-x Mn x Te alloy are also presented. Our calculations using GGA+U SIC approach agree well with the available experimental data and other calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shell stability and conditions analyzed using a new method of extracting shell areal density maps from spectrally resolved images of direct-drive inertial confinement fusion implosions

In warm target direct-drive ICF implosion experiments performed at the OMEGA laser facility, plastic microballoons doped with a titanium tracer layer in the shell and filled with deuterium gas were imploded using a low-adiabat shaped laser pulse. Continuum radiation emitted in the core is transmitted through the tracer layer and the resulting spectrum recorded with a gated multi-monochromatic x-ray imager (MMI). Titanium K-shell line absorption spectra observed in the data are due to transitions in L-shell titanium ions driven by the backlighting continuum. The MMI data consist of an array of spectrally resolved images of the implosion. These 2-D space-resolved titanium spectral features constrain the plasma conditions and areal density of the titanium doped region of the shell. The MMI data were processed to obtain narrow-band images and space resolved spectra of titanium spectral features. Shell areal density maps, ρL(x,y), extracted using a new method using both narrow-band images and space resolved spectra are confirmed to be consistent within uncertainties. We report plasma conditions in the titanium-doped region of electron temperature (T e ) = 400±28eV, electron number density (N e ) = 8.5x10 24 ±2.5x10 24 cm -3 , and average areal density <ρR> = 86±7mg/cm 2 . Fourier analysis of areal density maps reveals shell modulations caused by hydrodynamic instability growth near the fuel-shell interface in the deceleration phase. We observe significant structure in modes l = 2-9, dominated by l = 2. We extract a target breakup fraction of 7.1±1.5% from our Fourier analysis. A new method for estimating mix width is evaluated against existing literature and our target breakup fraction. We estimate a mix width of 10.5±1μm.

42 ENGINEERING↗

The structure and interaction of polymers affects secondary cell wall banding patterns in Arabidopsis

Abstract Xylem tracheary elements (TEs) synthesize patterned secondary cell walls (SCWs) to reinforce against the negative pressure of water transport. VASCULAR-RELATED NAC-DOMAIN 7 (VND7) induces differentiation, accompanied by cellulose, xylan, and lignin deposition into banded domains. To investigate the effect of polymer biosynthesis mutations on SCW patterning, we developed a method to induce tracheary element transdifferentiation of isolated protoplasts, by transient transformation with VND7. Our data showed that proper xylan elongation is necessary for distinct cellulose bands, cellulose–xylan interactions are essential for coincident polymer patterns, and cellulose deposition is needed to override the intracellular organization that yields unique xylan patterns. These data indicate that a properly assembled cell wall network acts as a scaffold to direct polymer deposition into distinctly banded domains. We describe the transdifferentiation of protoplasts into TEs, providing an avenue to study patterned SCW biosynthesis in a tissue-free environment and in various mutant backgrounds.

59 BASIC BIOLOGICAL SCIENCES↗

The Effects of Ru and Rh Substitutions on the Magneto-electronic and Optical Properties of the TbNi{sub 5} Intermetallic Compound: An Ab Initio Investigation

In this study, we have performed the first-principles investigation of the structural, electronic, magnetic, and optical properties of TbNi{sub 5}, TbNi{sub 3}Ru{sub 2}, and TbNi{sub 3}Rh{sub 2} compounds. The full-potential linearized augmented plane waves with local orbitals method is used in the framework of density functional theory (DFT) employing the generalized gradient approximation (GGA) for the exchange correlation functional as implemented in WIEN2k package. The structural properties are reposed on the evaluation of the equilibrium lattice parameters of these compounds under hexagonal structure such as lattice constants (a and c), bulk modulus (B), and its first pressure derivative (B{sup ′}). The spin-polarized electronic structures, including band structure and density of states, are calculated employing the GGA plus band correlated Hubbard parameter (GGA + U) scheme. The results show that density of states and magnetic moment of the pure TbNi{sub 5} compound are changed by doping. These changes are observed in the appearance of additional peaks on the spectral density of states (DOS) and in the augmentation of the total magnetic moment of TbNi{sub 3}X{sub 2} (X = Ru and Rh) intermetallic compounds. Based on the electronic structure results, the frequency dependents of optical conductivity are estimated in all the spectra and interpreted in the interband optical absorption part.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio study of the electronic and vibrational structures of tetragonal cadmium diarsenide

Ab initio calculations of the electronic spectrum, deformation electron density, and phonon frequencies at the center of the Brillouin zone of the CdAs{sub 2} tetragonal compound are carried out in the context of the density-functional method. It is established that the crystal is an indirect-gap semiconductor with a band gap of ~1 eV, which is in good agreement with well-known optical and electrical experimental data. The features of chemical bonding in the crystal are studied. The features are defined by the fact that As atoms form spiral chins of covalent As–As bonds, whereas Cd–As bonds are ionic-covalent. The ab initio calculated phonon frequencies are compared with the frequencies calculated in the Keating model and with experimental data; the partial contributions of Cd and As atoms are analyzed.

36 MATERIALS SCIENCE↗

Stepped Impedance Resonators in Triple Band Bandpass Filter Design for Wireless Communication Systems

Triple band microstrip tri-section bandpass filter using stepped impedance resonators (SIRs) is designed, simulated, built, and measured using hair pin structure. The complete design procedure is given from analytical stage to implementation stage with details The coupling between SIRs is investigated for the first time in detail by studying their effect on the filter characteristics including bandwidth, and attenuation to optimize the filter perfomance. The simulation of the filler is performed using method of moment based 2.5D planar electromagnetic simulator The filter is then implemented on RO4003 material and measured The simulation, and measured results are compared and found to be my close. The effect of coupling on the filter performance is then investigated using electromagnetic simulator It is shown that the coupling effect between SIRs can be used as a design knob to obtain a bandpass Idler with a better performance jar the desired frequency band using the proposed filter topology The results of this work can used in wireless communication systems where multiple frequency bandy are needed

42 ENGINEERING↗

A tunable amorphous p-type ternary oxide system: The highly mismatched alloy of copper tin oxide

The approach of combining two mismatched materials to form an amorphous alloy was used to synthesise ternary oxides of CuO and SnO{sub 2}. These materials were analysed across a range of compositions, and the electronic structure was modelled using density functional theory. In contrast to the gradual reduction in optical band gap, the films show a sharp reduction in both transparency and electrical resistivity with copper contents greater than 50%. Simulations indicate that this change is caused by a transition from a dominant Sn 5s to Cu 3d contribution to the upper valence band. A corresponding decrease in energetic disorder results in increased charge percolation pathways: a “compositional mobility edge.” Contributions from Cu(II) sub band-gap states are responsible for the reduction in optical transparency.

36 MATERIALS SCIENCE↗

Enhanced photocatalytic degradation of methylene blue dye under UV-sunlight irradiation by cesium doped chromium oxide thin films

Highlights: • Cs doped thin films has been prepared by the low- cost spray pyrolysis technique. • Enhanced photocatalytic activity of Cr2O3 thin films for MB photogegradation(MB) dye was achieved through Cs doping. • 6 % Cs doped Cr{sub 2}O{sub 3} thin film photocatalyst with the merits of low band gap and more oxygen vacancies, exhibits the highest sun-light photocatalytic activity. • High photostability and recyclability was achieved under sun-light irradiation. - Abstract: The present contribution highlights the photocatalytic degradation of methylene blue dye over chromium oxide Cr{sub 2}O{sub 3} thin films based photocatalysts illuminated by ultraviolet and sunlight. Cr{sub 2}O{sub 3} photocatalyst was synthesized as thin film by the spray pyrolysis method on glass substrate at temperature of 350 °C. The physical properties of the thin films were studied by X-ray diffraction, scanning electron microscopy (SEM), infrared spectroscopy (IR), Raman spectroscopy, photoluminescence (PL) probing and UV–vis spectroscopy. XRD results showed that all samples were well crystallized with rhomoboedric curudum structure. Emissions of all films have been observed in visible region at 325 nm excitation. UV–vis-NIR spectrophotometry analysis showed that the band gap energy value of chromium oxide is shortened with cesium doping. Results indicate that both the cesium doping and the introduction of oxygen vacancies promote good photocatalytic activity of Cs doped Cr{sub 2}O{sub 3} thin films under sunlight for MB degradation.

36 MATERIALS SCIENCE↗

Structural and optical properties of GaN and InGaN nanoparticles by chemical co-precipitation method

Highlights: ► First report on InGaN NPs by chemical co-precipitation method. ► There is no phase separation in InGaN NPs. ► Both NPs are suitable for optoelectronic devices in the visible region. ► First experimental observation of phonon mode at 272 cm{sup −1} for GaN NPs. ► First report on μ-Raman analysis for InGaN NPs. -- Abstract: A facile method for the synthesis of gallium nitride (GaN) and indium gallium nitride (InGaN) nanoparticles (NPs) has been reported by simple chemical co-precipitation method. The average diameters of the GaN and InGaN NPs were 12 nm and 38 nm respectively. GaN NPs show high crystalline quality with hexagonal structure while InGaN NPs exhibits some cubic inclusion by X-ray diffraction. Room-temperature photoluminescence analysis shows the near-band edge emission at 3.43 eV for GaN and a strong blue emission at 3.0 eV for In{sub 0.4}Ga{sub 0.6}N NPs. The E{sub 2}{sup H} phonon peaks from micro-Raman scattering at 567 cm{sup −1} for GaN and 564 cm{sup −1} for InGaN confirms the wurtzite nature of both the NPs. In addition, we have also assigned some other phonon modes of GaN associated with zone boundary K point of the Brillouin zone which is not experimentally observed for their bulk counterparts.

36 MATERIALS SCIENCE↗

Elucidating Structural Disorder and the Effects of Cu Vacancies on the Electronic Properties of Cu 2 ZnSnS 4

Although a promising photovoltaic material that is inexpensive and easy to manufacture, Cu 2 ZnSnS 4 (CZTS) suffers from a low open circuit voltage thought to be due to local potential fluctuations caused by a disordered Cu/Zn sublattice. The disordered character of CZTS is difficult to study experimentally and has been universally neglected in computational studies. In this work, we develop a cluster expansion model that enables simulation of the order–disorder phase transition in CZTS for the first time. With a proper atomic structure of the disordered phase in hand, we investigate the temperature-dependent voltage loss in CZTS, illustrating intrinsic limitations of existing synthesis methods and suggesting an optimal annealing temperature. We offer one explanation why Cu-poor CZTS is optimally efficient, as Cu vacancies increase the band gap via interactions between free carriers and the disordered nature of as-grown CZTS. Accordingly, increasing carrier concentrations may be an effective strategy to flatten the fluctuating potentials.

14 SOLAR ENERGY↗

Discovery and Synthesis of a Family of Boride Altermagnets

Borides are a rich material family. To push the boundaries of borides’ properties and applications into broader fields, we have conducted systematic theoretical and experimental searches for synthesizable phases in ternary borides TM 2 B 2 (T = 3d, M = 4d/5d transition metals). We find that TM 2 B 2 in the FeMo 2 B 2 -type and CoW 2 B 2 -type structures form a large family of stable/metastable materials of 120 members. Among them, we identify 40 materials with stable magnetic solutions. Further, we discover 11 altermagnets in the FeMo 2 B 2 -type structure. So far, boride altermagnets are rare. In these altermagnets, T = Fe or Mn atoms are arranged in parallel T-chains with strong ferromagnetic intrachain couplings and antiferromagnetic interchain couplings. They simultaneously exhibit electronic band spin splitting, typical of ferromagnetism, and zero net magnetization, typical of antiferromagnetism. They also exhibit magnonic band chiral splitting. Both effects originate from the unique altermagnetic symmetries crucially constrained by the nonmagnetic atoms in the structure. Transport properties of relevance to spintronic applications, including the strain-induced spin-splitter effect and anomalous Hall effect, are predicted. An iodine-assisted synthesis method for TM 2 B 2 is developed, using which 7 of the predicted low-energy phases are experimentally synthesized and characterized, including 4 altermagnets. This work expands the realm of borides by offering new opportunities for studying altermagnetism and altermagnons in borides. It also provides valuable insights into the discovery and design of altermagnets. Here, by demonstrating that altermagnets can exist as families sharing a common motif, this work paves a feasible route for discovering altermagnets by elemental substitutions and high-throughput computations.

Chemical structure↗

Two-step spin-coating of vacancy-ordered double perovskites enables growth of thin films for electronic devices

Vacancy-ordered double perovskites (VODPs), such as Cs 2 TeX 6 (X = Cl, Br, I), are lead-free alternatives to conventional metal-halide perovskites (MHPs). One limitation of VODPs is the lack of processes to form thin films relevant for physical characterization and electronic devices. A two-step spin-coating method was developed for synthesizing high-quality films of Cs 2 TeBr 6 . Independently depositing CsBr and TeBr 4 enables high precursor concentrations and control over crystallization kinetics. By optimizing the spin-coating parameters, conversion of precursors to phase pure films was observed using structural and surface characterization methods. The growth of mixed-halide systems was investigated using alternative salts including CsCl and CsI. The formation of halide alloys was found to depend on the existence of routes to byproducts. Lastly, single carrier diodes of Cs2TeBr6 were designed following valence band characterization with photoelectron spectroscopy. Temperature-dependent space-charge-limited current measurements revealed that transport occurs by hopping and the hole mobility is 3.2 × 10 −5 cm 2 V −1 s −1 near room temperature. As a result, the insights from the 2-step procedure provide a pathway towards making semiconducting devices from VODPs.

Kuklinski, Owen [University of California, Santa B↗